HELP!!!! Error code 0xc0000034 boot problem

Hi, my less than a year old Toshiba Satellite encountered the Boot BCD Error screen, I looked online for support and creted a recovery USB drive from a friends PC. I followed the directions I found that led me to the US > Trouble Shoot > Advanced Option screens I put in all the Bootrec/ xxx suggested commands, got to the end and it told me the system is not recognizable, is there another way to get the PC to boot after this error mesg?
Can someone please help with this?
Thanks

Hello there... Hopefully this will help you get back up and running.
Ran into the same issue when I booted my PC this morning. Blue screen
Your PC needs to be repaired
The Boot Configuration Data File is missing some required information.
File: \BCD
Error code: 0xc0000034
blah blah... Alright so you mententioned you've created the USB stick and booted into it.
Click the trouble shoot icon -> advanced -> command prompt. Then enter the following commands one by one.
For my build C:/ is the windows harddrive. If your harddrive with windows on it isn't C:/ then change the letter to match your configuration. See at the bottom if you are unsure, I'll post some commands to help you work out which is your windows drive.
Bootrec /fixmbr
Bootrec /fixboot
Bootrec /scanos
Bootrec /rebuildbcd
After each line hit enter, you will see a success message. Then finally type in..
BCDboot c:\windows /s c: /l en-us
The slash after the C: and before windows has to be a backslash.
Reboot and you're done.
Run this fix on 4 coumputers so far, haven't determinted which part of the process fixes it but haven't run into any problems on doing the above.
Finding out your windows drive
In the command prompt type in
diskpart hit enter and a new window will open. then in that window type
list volume hit enter once again and your drives will be listen along with the drive letter
/Widowmaker.

Similar Messages

File missing (file\BCD error code 0Xc0000034 help need for work!

file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pc

Hi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Error code: 0xc0000034

I tried to put on my laptop and it displayed this error message:
Your PC needs to be repaired.
The Boot Configuration Data file is missing some required information.
File: \BCD
Error code: 0xc0000034.
My laptop is a Pavilion G6.
please I need help urgently.
I recently upgraded from win 8 to win 8.1
thanks

Hi,
Try the solution provided in the below forum link
http://h30434.www3.hp.com/t5/Notebook-Recovery/the-windows-boot-configuration-data-file-does-not-con...
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

HP 650 notebook BSOD error code : 0xc0000034

I have a HP650 notebook (Windows 8.1) and have for about 20 months. I ran a battery check and it said to calibrate it so i did so by going into the HP diagnostic test or something by pressing F2/escape on start-up. I ran it fine and it went for about 2 hours and upn completion it said it worked. It then restarted the laptop and i got a BSOD. It read "Your PC needs to be repaired. The boot configuration data file is missing some required information. File /BCD . Error code:0xc0000034. You'll need to use the recovery tools on your installation media." After looking online for a couple of hours someone told me to run an elevated command prompt and type in the following in order: "Bootrec /fixmbr, Bootrec /fixboot, Bootrec /scanos. Bootrec /rebuildbcd". After doing so it worked and i backed up everything on my laptop. My question is why did this happen. It must of had to been something to do with the battery configuration. Anyway, how can i stop this from happening in the future? Will it happen again or is it fixed as i typed those specific commands above and it worked or are the commands just a temporary fix or something? Also can i run the battery check again just to double check it worked or do you think i will get the BSOD error message again?
Thanks

Hello, @arsenal234123
To get your issue more exposure I would suggest posting it in the commercial forums since the HP 650 Notebook PC is a commercial product. You can do this at Notebook - HP ProBook, ZBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
The support page for your product may be helpful in the meantime:
HP 650 Notebook PC.
I hope this helps!
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Error code 8740 ( Internal Problem)

I am a Mac Desktop G4 9.2 user and currently suffering for the error code 8740 whenever i download the file from internet such as fonts.
Before getting this message, I had error message saying I need CarbonLib 1.6.0 or later so, I have reinstalled the carbonLib and then I had error message saying my suffit expander needs to be updated,.. so it is done. But, now I am able to download the file but can't expand the file and getting Error code 8740 ( Internal Problem)
Also, my internetExplorer is viewing sort of unformatted fonts which hurts my eye to read it...
If there is any tips for this problem... it will be greatly appreciated!

There may be a problem with the Text Encoding
Converter; verify that the following files are
present in the Text Encodings folder inside the
System Folder:
Arabic Encodings
Central European Encodings
Chinese Encodings
Chinese Encodings Supplement
Cyrillic Encodings
Greek Encodings
Hebrew Encodings
Indic Encodings
Japanese Encodings
Korean Encodings
Symbol Encodings
Thai Encodings
Turkish Encodings
Unicode Encodings
Western Language Encodings
All of these items should have a version number
listed, and there should also be an item named Text
Encoding Converter in the Extensions folder. You can
extract all of the items listed here from the Mac OS
9.21 updater with TomeVi
ewer.
(16102)
Thank you for your respond.
I took a look at text encoding folder in system folder, and there were all components you listed.
I did dowload TomeViewer, but I am not sure what I should do with this program?? Please tell me in more detail.
Also, I would like to find out how to install downloaded fonts from internet.
Thanks

My iphone wont turn on or restore,HELP error code 1015

My iphone wont turn on or restore,HELP error code 1015

jailbroken? if so we can't help here, try google.

Help with Apple Error Code & Intermitant Boot Up Problems and ? marks

Well that was a long winded Subject line but I am a technical individual ... but know PC's and learn the Mac world which I have fallen in love with.
Recently I have been getting lock up as well as hanging boot ups with the flashing question mark on the screen.
I have been doing some research and one of the most recent things I did was run the Apple Hardware Test. During the quick test I received the following erro message:
4M0T/ 40000003: HDD
I am feeling like this likely a hard drive problem but not certain. I was trying to find what this error code meant and havent any luck yet so I thought I would try and post here. If I could find the error codes it woul dbe helpful. But if you have any ideas please help me out.
I have had session lock up where I can not do anything but move the mouse, totally frozen sessions, as well as boot ups.
One of the things I did earlier was run the TechTools System Tools that came with my Imac. It said everything was fine. So confused with what is wrong.

For an iMac 24 inch (Early 2008) 3.06 GHz machine, the 4MOT error code* indicates a fan issue, and recommends that a technician…
• shut down, the power back on and retest the machine
• verify that the fan speed indicator is not a zero value (yours is reporting a 3)
Without special tools and substantial experience, and because doing so would require opening your machine and thereby invalidating its existing warranty, they indicate that a technician should…
• verify that the fan blades are not obstructed by cables, tape or other obstacles
• verify that the fans are properly connected to the logic board and rotate when the machine is started
• if the problem persists, replace the fans and retest the machine
• if it still persists, replace the logic board
While HDD is a commonly used abbreviation for hard disk or hard drive, there is no Apple Hardware Test error indicator for a hard drive for this particular platform, and yours does not relate to one based upon that AHT result. While there may be a sensor issue in play, AHT does not report a sensor issue in your case.
You may wish to run the SMART diagnostics against your drive to see if it indicates an impending failure, but what you report is limited strictly to fan operation. You should take your covered machine into a dealer or service provider in order to have it tested and repaired under warranty.
*NOTE: these error codes are often non-unique, and can mean very different things from one model series to another, and—within one product family—from one specific machine type to another.

HP-PAVILION DM1-1090EV - Recovery - Error code:0XC0000034

need help please...
I used EASEUS Partition Master software to resize C: drive from 290GB to 50GB, then allocate the new partition 240GB to F: drive
when i try to boot from partition recovery by pressing f11 the following error message is shown

Hi,
Changing the partition sizes or deleting a partition fomr the original partition scheme causes the loss of the ability to access the recovery manager from the normal method. That ability can be resored by preformaing a factory image recovery. Be aware that a recovery is a destructive process and that makes it very different from Windows system restore. It is also an irreversible process.
You will have better results in your attempt to execute a recovery if you use a recovery disk set or usb recovery media.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Windows error code 0xc0000034

Recently, when I switch on my laptop, this error code appear 0xc0000034.
My question is, why Windows can fail? I keep my Windows updated, installed anti-virus, scan my laptop every week, de-fragment my hard disk every fortnight.
Some say my hard disk may have problem, but it is okay. Then I try to repair using Windows Repair Environment. It did the trick but I have no idea how it's fixed.
Any of you facing the same problem? I search the internet and there appears a lot of people facing this issue. If it is a common problem, why Microsoft fail to fix it?
Thank goodness my laptop is recoverable, if not, imagine the time I lost just to do a fresh installation to my laptop and copy all my backup.
Chiyawa

Solved - for the record - followed the directions in this link:
http://pcsupport.about.com/od/fixtheproblem/ht/rebuild-bcd-store-windows.htm

0xc0000428 error code on boot no installation media

When I turn on my laptop it comes up with the blue screen of death and it says recovery at the top.
It then says error code: 0xc0000428
I'm not an IT wiz and have no idea how to solve it.
Can anyone help

TF
If it came with win 8 installed there is probably a reset to factory/restore partition. If you can eventually get it to boot we need the crash log called the DMP files to know what is happening with the computer.
We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
WE NEED AT LEAST TWO DMP FILES TO SPOT TRENDS AND CONFIRM THE DIAGNOSIS.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
Wanikiya and Dyami--Team Zigzag

Secure Connection Failed: Error code: ssl_error_illegal_parameter_alert - New problem after website moved to new server.

My website was migrated to a new cloud server last week and after the move visitors to my site using Firefox have been intermittently receiving the following error when visiting a https:// url.
Secure Connection Failed
An error occurred during a connection to www.url.com
SSL peer rejected a handshake message for unacceptable content. (Error code: ssl_error_illegal_parameter_alert)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
Upon a few refreshes the page may load again but often very slowly and often not all images will load.
The web hosts have tried many things, have had cpanel techs check the server and even set up a new ssl certificate to try and resolve the problem with no luck.
Researching the internet shows that people have faced this issue when upgrading Firefox or with certain AntiVirus software conflicts.
However I can't tell all FF visitors to start altering their config files in order to be able to visit my site.
I don't understand how I didn't have this issue prior to the migration but now something has changed that no one knows how to resolve.
For reference: I am using FF 28.0 and I am not experiencing this SSL error on any other site other than my own since the migration.
Does anyone have any information on what the web host may be able to do to fix this SSL issue that only occurs for FireFox users?
Thank you for any suggestions you may be able to offer.

Still experiencing this problem and hoping someone may have some ideas to try on the server.

Help error code 7 opengl crash

I get this when Premiere pro CS5 crashes :
Your hardware configuration does not meet minimum specifications needed to run the application. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code: 7
I think its becose of a large image that I am using. But I need it large to zoom out.
Anyone else has that problem? Any fixes?
I have the latest updates and last drivers for my GTX 460

Updates:
Now cuda is not even loading. All projectrs that I open say that the projecgt was last using mercery engine playback (or said differently ) and now it will be without hardware acceleration. So it's as if I dont have a valid GTX card.
I am starting to regret selling my gtx 285 to upgrade with this one. But, might not be a fault in the card. Besides the crash from the large picture (the original problem) Any one has any idea why now Premiere does not detect, or use my card?
Thanks
I need to re-cut a documentary for a festival in April and I am heavy on After effect stuff and plug ins use. I know hardware aceleration does not help with every types of effects but things are not playing smoothly at all. I guess I will have to lower the playback quality but with 24 G of ram, an i7 960 and Asus P6T pro mobo, raid cards... It should be a lot better then it is right now.

Z77 Mpower Error Code 62 Boot Issue

Hey guys. I am pretty dumbfounded on this one. I will start by listing my specs:
MSI Mpower mobo
i5-2500k
Corsair AX-750
EVGA 670
Intel 520 SSD / WD 3TB
So this build has been running fine for absolutely months, no issues whatsoever. Today I downloaded and installed Mumble, it asked me to restart my system which I did. Now nothing out of the ordinary until nothing happens on the restart boot. PC is on, power on, fans all working, LED's on, but no screen input. Note I had changed NOTHING since it was working.
I'm just failing to see why and what caused this and how to fix it. I've tried a few basic things, re-seating GPU/moving to diff slot, re-seating RAM, turning off for 1-2 hours, nothing is working. The error code is 62. I've looked around but as far as I can see there are no dead-set fixes, just hoping anyone here may be able to assist me.
Regards.

I couldn't test it in another system but I had an old GTX 260 on hand and with that the system runs fine.
Which obviously points to the GTX 670 malfunctioning but I still don't get how it can go from fine no issues one moment to completely not working after doing a restart..
Well I guess I'm going to have to RMA it either way. Thanks for the help.

Replaced CPU same LED error code for CPU problem continues to occur

I have a dv6-1280us laptop that does not start. I can hear the optical and HDD, screen is blank the number lock and cap lock LED blinks once between pause. The chart indicates that the CPU needs to be replaced. I replaced the CPU with a new one from HP. I still am getting the same LED error code. Any suggestions on resolving this problem. Thanks.

atlantrace wrote:
I have a dv6-1280us laptop that does not start. I can hear the optical and HDD, screen is blank the number lock and cap lock LED blinks once between pause. The chart indicates that the CPU needs to be replaced. I replaced the CPU with a new one from HP. I still am getting the same LED error code. Any suggestions on resolving this problem. Thanks.
It's either a corrupted BIOS or motherboard problem. Since you've already replaced the CPU, the only other option is to replace the motherboard.

Help, Error Code -36

ok I keep trying to transfer large video files from an external Firewire hard drive to a my second internal hard drive. and after a while the file transfer stops because of Error code-36 It says "The finder cannot complete the operation because some data in "blank" could not be read or written. (Error code -36)"
few things to point out
All hard drives are formatted "Mac OS Extended (journaled)"
The files are video files ".mov"
The files are larger than 4GB
and it freezes after transfering 1.97GB

How is the external drive formatted, HFS or some windows format (FAT32 for instance)?
Check [here|http://blogs.discovermagazine.com/badastronomy/2008/03/30/mac-os-tip-for- error-code-36] for a suggested solution, that may work.
Also, try trashing the Finder's pref file in the folder /Users/Library/Preferences. Find the file "com.apple.finder.plist", send it to Trash (empty the Trash, if you want) and reboot.
Also check the FW cable.
/p

HELP!!!! Error code 0xc0000034 boot problem

Similar Messages

Maybe you are looking for