Help! Error HP Office Jet 6600

I used my HP Office Jet 6600 All in one; yesterday to make several copies and it worked just fine. Today when I went to make some copies, the printer read "Error: There is a problem with the printer or ink system. Turn th printer off, then on. If problem persists. Contact HP" I have done this numerous times. Nothing, I contacted HP and all the help/advice that they could give was try cleaning out the ink cartridges. I also did this, but that did nothing. So I am left with problem. has this happened to anyone? Anyone have any suggestions?

Hi Krysta,
Welcome to the HP Forums!
I see that you are getting the error, "There is a problem with the printer or ink system. Turn the printer off, then on. If
problem persists. Contact HP", with your HP Officejet 6600. I am happy to help you!
Please take a look through this guide. 'Problem with Ink System' Error Message Displays on the Computer During Setup.
If you have done all those steps already, please call our technical support at 800-474-6836 for your replacement/upgrade options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this helps you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

HP Office Jet 6600, cost of 933 HP ink cartridges same for regular and xl?

Office Jet 6600 ink cartridges. 933 cyan, magenta and yellow. My new cartridges in cyan XL is the same size as old regular size cartridge. Please explain.

Doricee wrote:
Office Jet 6600 ink cartridges. 933 cyan, magenta and yellow. My new cartridges in cyan XL is the same size as old regular size cartridge. Please explain.
Hi,
The XL cartridges are physically same size with the normal cartridges, only THE volumes of ink inside are not the same. Normally the volume of ink inside a XLcartridge is more than double the volume of ink inside a normal cartridge.
Hope this helps. Note: they must be physcally same size otherwise they won't fit.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have an ipad2 and we purchased an HP office jet 6600. I can not connect to print. In searching the net, I have been advised to get the firmware update but can not find it. Can you advise?

I have an ipad2 and we purchased an HP office jet 6600. I can not connect to print. In searching the net, I have been advised to get the firmware update but can not find it. Can you advise?

Is the HP on the airprint list?
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

Simply Print Anything document with my Office Jet 6600

Why can't I print with my Office jet 6600??
Everything is connected but it is supposed to be Wireless??
Please HELP I have been fighting this since I bought this printer!!
Rene

Hello rcblv. In order to assist you, I need to determine if the issue is hardware or software related. I want you to make a photocopy and perform a printer status report. I've included a link to the manual of this printer in case you need it. Let me know as soon as possible what the results are. I'm only here to help!
http://h10032.www1.hp.com/ctg/Manual/c03226612.pdf
Mario
I worked on behalf of HP.

I have a Office Jet 6600 and cannot get it to print. I have power to the monitor.

I have an HP Office Jet 6600 and it stopped printing. I use HP ink 932xl and 933xl. The message on my computer is: Missing or failed print head. The print head appears to be missing, incorrectly installed or incompatible. The monotor states: There is a problem with the printer or the ink system. Turn the printer off, than on. If the problem persis contact HP. So please tell how I can get my printer to work. This problem start about 3 weeks ago but I was out of the country for 12 days. I rebooted the desk top and ended up with 1 print job but than this famous message became trapped in my computer.

Here are the specs for your HP Pavilion p6-2127c Desktop Computer. Based on the specs, your computer has one DVI-D (digital) out and one VGA (analog) out. No adapter is going to change the DVI-D to VGA.
(#1) - DVI-D (digital out only) (#2) - VGA (analog out only)
Using a VGA analog "dual tail adapter" won't work either. With both monitors connected to the VGA port, your computer won't be able to identify the correct monitor settings because of communications conflicts between the devices. This setup will only work with one DVI-D monitor and one VGA monitor.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How to set up Hp office jet 6600 to print from the iPad air? In a wifi setting.

How can I print from iPad air to the HP office jet 6600?

Hi Big-apple
Check out the link below....
http://www8.hp.com/ie/en/support-topics/mobile-printing/how-to-print-mobile-devices-ipad-iphone.html
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

I have a hp office jet 6600. It will not wake up to receive e-print.

I just bought a office Jett 6600. It will only recieve E-print when it is awake. The print will not wake up to receive eprint. Not much good if i am traveling. <script id="JSScriptForDynamicControls" type="text/javascript" src="https://www.billeo.com/page/js/amex/insitedominspector.js"></script>

I would make sure printer is plugged directly into a wall outlet. I would also make sure that printer had latest firmware update.

How to enlarge picture on my hp office jet 6600 all in one printer

how do i enlarge pictures from my hp office jet 6600 all in one printer

Hi,
Are you talking about copy, scan or print ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My iPad will not print to my wireless hp office jet 6600 anymore

MY iPad will no longer print to my wireless hp office jet 6600 printer

Hi Everyone,
Don't spend too much time trying to figure this out. Apple has total control of what apple products can do. Since the upgrade to IOS my 6600 HP printer no longer is recognized by my Ipad. Just to add insult to injury my Iphone's wifi is now greyed out and I can no longer use wifi.
I didn't see this coming but think about how apple can force you to upgrade to other products by simply limiting a device's capability through an operating system upgrade.
I made an appointment with an Apple genius today and they said "Sorry this is a hardware issue (Iphone) and you will need to upgrade." Of course I will, a $700 phone or Ipad should only last a couple of years... right?
I am not upset but I will be more critical in my future purchases of Apple products.

HP office jet 6600 wi fi printing

hi have a 6600 office jet and it wont recognise ip address to finish set up. if i want to print i have to take my router name off settings and put the officjet in. The printer says its connected and all correct name and its in my priners file but cant print wirelesly. Have checked with bt and my rounter is working ive gone through all troubleshooting but cant get my head round this. hope someone can help

Hi helenhunt,
I would like to help you with this.
I have located a document I believe will be helpful. Although the title is 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print, the solutions will help resolve the symptoms you are experiencing.
Solution 1 in this document suggests using the HP Print and Scan Doctor. This is a great place to start because
the Print and Scan Doctor diagnoses and helps resolve common printing, scanning, and connectivity problems, including:
Connectivity :
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check : Checks for missing or corrupt driver files.
Device Manager : Checks for problems in Device Manager that would prevent printing.
Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match : Checks the port settings for the HP product.
Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
Print Settings : Checks and adjusts the print quality settings.
Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests : Checks the scan mechanism, drivers, and registry entries.
Please let me know if this resolves the issue, or if you require additional assistance, thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP OFFICE JET 6600 HOW TO TURN OFF ECM ON FAX

I receive error code 344 when I try to fax only to local numbers and I have lowered the fax speed to the lowest and then I receive an error code 350. It suggest I turn off the ECM and I don't know how to access it to turn it off, can anyone tell me how?

Hello abcjm,
Welcome to the HP Support Forums!
I see you are having some fax related errors on the Officejet 6600, you have been able to find the troubleshooting but unable to locate where to disable ECM.
If you go to Setup, Fax Menu, Advanced Fax Setup, you will be able to turn off ECM.
Best of luck,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How can iSync my iPad to my hp office jet 6600 so I can print from my iPad

I am trying to sync my iPad with my hp office jet printer 6600

Hi,
You can't iSync your iPad to your printer, full stop. If you wish to print from your iPad you need to connect them (iPad and printer) on a SAME network. And because your printer is not on the following list:
http://support.apple.com/kb/ht4356
The following app MAY work:
http://itunes.apple.com/au/app/hp-eprint/id299531647?mt=8
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My hp office jet 6600 keeps saying the pinhead is missing

I installed new print cartridges but cannot get my HP Office 6600 wireless printer to print. It keeps saying the pinhead is missing. I have turned the printer on and off several times. The show me button does not work. Please help me! What should I do?

Hi @dancingnancy,
Thank you for visiting the HP Support Forums! I see you recently installed new print cartridges in your HP Officejet 6600 and now you are getting the error message 'Printhead missing'.
I would first like you to start on Solution Two in this troubleshooting document and work your way down: A 'Cartridge Problem,' 'Ink Cartridge Failure,' or 'Incompatible Ink Cartridges' Error Message Displ..., I know you are not getting this error message however the cleaning steps listed are what I need you to do.
Once you have finished the steps listed please continue here: A 'Missing or Failed Printhead' Error Message Displays on the Printer or on the Computer
Please let me know the outcome, I will watch for your reply.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Printer Problem with HP Office jet 6600

I have the following message displayed on the printer.
There is a problem with your printer or ink system. Turn the printer off then back on if the problem persist contact HP.
I have searched through the HP suggestion for repaid but find no match.
I did change my cartriges for the first time. The magenta supply showes low even though its a new cartrige all the other show full,
I'm under waranty but have no idea how to move forward
Any help would be greatly appreciated

Hi @FrankieP,
Welcome to the HP Forums!
I understand that you are getting the error message, "There is a problem with your printer or ink system. Turn the printer off then back on if the problem persist contact HP". With you HP Officejet 6600. I am happy to help with this error!
I would recommend to look through this guide, 'Problem with Ink System' Error Message Displays on the Computer During Setup.
If that guide does not resolve your issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Printer hp office jet 6600

Ink system failure. Missing or failed print head. I put new ink cartridges and this message came up. Print head does not have a latch. Already took cartridges out cleaned gold square in corner, turned on and off. Put old ones back in and nothing. The same message. Frustrated. Can you help get this to work without me buying new printer?

Hello Monte8,
Welcome to the HP Forums! I understand your concerns with your Officejet 6600. I will try my best to help you remove this error message:
Please follow this HP document on An 'Ink System Failure' Error Message Displays on the Printer or on the Computer and 'Missing or Failed Printhead'.
Make sure this printer is plugged into a direct wall, not a surge protector. This will test out the power and to verify if you are receiving the same error message.
If you are receiving the same message, then please contact HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
Good luck.
I worked on behalf of HP.

Help! Error HP Office Jet 6600

Similar Messages

Maybe you are looking for