Help - error in reading frame from file
Hi there
Couldn't find any reference to this particular problem after searching around a whole load.
I had my Mac crash on me a few days ago and since then I've been only able to work on my current project for ten minutes at a time before I get the above dialogue come up.
It's not just this file that suffers from this and there doesn't appear to be a pattern to which file is affected. The files that are mentioned in the dialogue are outputs from both FCP and from AE itself, they are always Quicktimes and they are compressed with the Animation codec, although I've used a number of other codecs and it doesn't seem to make any difference. If I quit and restart AE, I can continue working for a while on a composition with the same file that caused the dialogue to appear, until it happens again, often with a different file mentioned in the dialogue.
We have re-installed the CC suite after an uninstall and clean-up, but to no avail.
Anyone else had this problem?
Do we need to reinstall the OS? Could it be a quicktime thing?
Many thanks for you help in advance.
See this thread, on which one of my colleagues is helping folks troubleshoot some related issues:
http://forums.adobe.com/message/5549272
Similar Messages
-
We use proxies in our work flow, pre-rendering certain comps before rendering out the final project. For the most part this works fine, but occasionally we'll get an error that reads: "Error (4) reading frame from file." It's always the same comp but it doesn't cause the problem in every project.
We use the quicktime codec with Tiff compression. Could it be a memory issue? Any help would be greatly appreciated. The error always pops up at the most inconvenient time -- of course.
Thanks,
JulianWell, if it's always the same file, then most likely one of the source footages is really damaged. The error not occuring every time mustn't mean anything. If the element in question is not visible at the given frame or AE doesn't do anything with it because it isn't required, naturally the error would not occur. I'm afraid the only way to track this down is to selectively disable/ remove the sources from the comps in question and render some test clips. Perhaps it would also help to check all the files used in the project in a "neutral" app such as external image and video viewers (XnView, VLC, MediaPlayer Classic...)
Mylenium -
Urgent help needed - writing/ reading to/from file
hi all..
can anyone help me with this problem:
The problem dioscussed in www.javaworld.com forum
any clues what the problem is??hi all...
i managed to get the gui set up, and the JList is finally loading the data,
yet, i am having problems with displaying relevant data of each item in the list...
could you please help??
// required imports
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.event.*;
import java.io.*;
import java.util.*;
// ViewPanel class: the panel for the view pane. handles its own events.
public class ViewPanel extends JPanel implements ListSelectionListener
private JList list;
private DefaultListModel listModel;
private JButton deleteButton;
private TicketStorage data;
// add pane items
private JLabel seat, seatData;
private JLabel name, nameData;
private JLabel duration, durationData;
private JLabel price, priceData;
private JCheckBox waiterService;
// creating panels
JPanel p1 = new JPanel();
JPanel p2 = new JPanel();
public ViewPanel(TicketStorage data)
// store data structure reference
this.data = data;
TrainTicket[] summary = data.summary();
listModel = new DefaultListModel();
for (int i = 0; i < summary.length; i++)
listModel.addElement(summary.getSeat());
list = new JList(listModel);
list.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
list.setSelectedIndex(0);
list.setVisibleRowCount(5);
JScrollPane listScroller = new JScrollPane(list);
listScroller.setPreferredSize(new Dimension(100, 150));
seat = new JLabel("Seat No:");
seatData = new JLabel();
name = new JLabel("Name:");
nameData = new JLabel();
duration = new JLabel("Duration:");
durationData = new JLabel();
price = new JLabel("Price:");
priceData = new JLabel();
// create add pane items
waiterService = new JCheckBox("Waiter Srevice");
waiterService.setEnabled(false);
// waiterService.addActionListener(boxListener);
JButton deleteButton = new JButton("Delete");
// deleteButton.addActionListener(buttonListener);
// adding listeners to the components
//deleteButton.addActionListener(this);
//waiterService.addActionListener(this);
list.addListSelectionListener(this);
// adding the components to their coreesponding panels
p1.setLayout(new GridLayout(5,1));
p1.add(seat);
p1.add(name);
p1.add(duration);
p1.add(price);
p1.add(waiterService);
p2.setLayout(new GridLayout(5,1));
p2.add(seatData);
p2.add(nameData);
p2.add(durationData);
p2.add(priceData);
p2.add(deleteButton);
this.setLayout(new GridLayout(1,3,3,0));
this.add(listScroller);
this.add(p1);
this.add(p2);
public void valueChanged(ListSelectionEvent e)
if (e.getValueIsAdjusting() == true)
// enable the delete button when an item is selected
deleteButton.setEnabled(true);
// retrieve the sellected seat number value
String itemSellected = listModel.getElementAt(list.getSelectedIndex()).toString();
// retrieve the ticket with the sellected seat number
TrainTicket tk = data.retrieve(itemSellected);
// load the relevant data of a sellected ticket
seatData.setText(tk.getSeat());
nameData.setText(tk.getName());
durationData.setText(Integer.toString(tk.getDuration()));
priceData.setText(Double.toString(tk.getPrice()));
/*/ if the selected ticket of type first class
if(tk instanceof FirstClassTicket)
if(((FirstClassTicket)tk).getWaiter()==true)
waiterService.setSelected(true);
waiterService.setEnabled(true);
else
waiterService.setSelected(false);
waiterService.setEnabled(true);
else
waiterService.setSelected(false);
waiterService.setEnabled(false);
the application runs, it loads the data available in the linked list,
yet, on switching from an item to another in the list, it keeps generating errors!!!
in addition to the fact that it does not display the data!!
for more info refer to the url in my first post!
any clues?? -
Export with Table Splitting : ORA-01115: IO error reading block from file
Hello,
We are in perfroming the last dryrun of our CU&UC conversion.
The are now in the process of exporting the ECC6 system (Oracle 10.2.0.4.0, HPUX ia64) using sapinst features, "table splitting preparation"
When doing so, we are facing critical errors :
Creating file /export_uni/sapinst_splitting/ora_query3_tmp3_1.sql.
ERROR 2010-08-11 10:27:28.881
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-12801: error signaled in parallel query server P002
ORA-01115: IO error reading block from file 90 (block # 16640)
ORA-27072: File I/O error
HPUX-ia64 Error: 22: Invalid argument
Additional information: 4
Additional information: 16640
Additional information: -1
ORA-01115: IO error reading block from file 90 (block # 16640)
ORA-27072: File I/O error
HPUX-ia64 Error: 22: Invalid argument
ORA-06512: at "SAPR3.TABLE_SPLITTER", line 775
ORA-06512: at line 1
I have therefore perfmed a dbverify ; no corruption has been recorded.
When trying to perfrom the EXPORT, without table splitting ; it works fine ...but the processing time is extremely long, as you can imagine. Any help would be highly appreciated.Regards.
RaoulThank you Stefan,
Our HPUX Release seems to be indeed 11v3,
[root@:/root]# uname -a
HP-UX B.11.31 U ia64 2566039091 unlimited-user license
I'll check the installation of the patch and keep you informed
Thank you
Raoul
Edited by: Raoul Shiro on Aug 11, 2010 11:57 AM -
Failed to read PID from file /run/nginx.pid: Invalid argument
Hi,
tried to get an nginx server running to set up an owncloud environment.
When starting the nginx server
$ systemctl start nginx.service
I get the message: "Failed to read PID from file /run/nginx.pid: Invalid argument"
[root@klaus /etc/nginx]# systemctl status nginx
nginx.service - A high performance web server and a reverse proxy server
Loaded: loaded (/usr/lib/systemd/system/nginx.service; disabled)
Active: active (running) since Sat 2013-10-12 17:50:46 CEST; 8min ago
Process: 1823 ExecStart=/usr/bin/nginx -g pid /run/nginx.pid; daemon on; master_process on; (code=exited, status=0/SUCCESS)
Process: 1821 ExecStartPre=/usr/bin/nginx -t -q -g pid /run/nginx.pid; daemon on; master_process on; (code=exited, status=0/SUCCESS)
Main PID: 1825 (nginx)
CGroup: /system.slice/nginx.service
├─1825 nginx: master process /usr/bin/nginx -g pid /run/nginx.pid; daemon on; master_process on;
└─1826 nginx: worker process
Oct 12 17:50:46 klaus systemd[1]: Failed to read PID from file /run/nginx.pid: Invalid argument
Oct 12 17:50:46 klaus systemd[1]: Started A high performance web server and a reverse proxy server.
but /run/nginx.pid is readable:
# cat /run/nginx.pid
2058
# ll /run/nginx.pid
-rw-r--r-- 1 root root 4 Oct 12 17:39 /run/nginx.pid
It seems nginx is runnung thought but in my browser I only get a blank page.
Any help appreciated.
Last edited by wombalton (2013-10-13 14:17:46)Actually it's the first time I tried to set up one.
I Basically followed this guide [1] adopting it to arch.
That's where i got my nginx.conf from. Taking the standard nginx.conf that comes by install and replacing the server part.
After some searching I found the owncloud manual[2] with an example nginx.conf. Comparing that with my one I found some differences. Applying them works out fine.
I get now the owncloud page.
The systemd error still ocurs, but I think it does not matter to run the server.
Thanks for your help.
[1] https://docs.google.com/file/d/0B0ZsTQd … ring&pli=1
[2] http://doc.owncloud.org/server/5.0/admi … figuration
EDIT:
Just in case someone stumbles over this and tries to use the config:
This one [3] really works
[3] http://doc.owncloud.org/server/5.0/admi … thers.html
Last edited by wombalton (2013-10-14 13:31:22) -
Reading Metadata From File Resets the Setting
I am using Lightroom 4 on MAC OS X Yosemite. I have done some editing on a picture in DNG format and then clicked "Save Metadata to File". I checked the XMP file with textedit and found that the change is indeed saved. But when I click "Read Metadata From File", it resets the pictures before any editing. Please, I need help to fix this problem.
jinsheng wrote:
I have done some editing on a picture in DNG format and then clicked "Save Metadata to File". I checked the XMP file with textedit and found that the change is indeed saved.
I'm confused - I'm pretty-sure Lightroom 4 will not save changes to an xmp file (even if DNG is read-only, unlike Bridge) - it embeds the metadata in the DNG file. Did you mean you edited the DNG file with a text editor? Anyway, if you do have a .xmp sidecars to your DNG, I recommend deleting them, or renaming them (until you figure out what's going on anyway), then retry - any difference?
PS - last I checked, Lr will generate an error when saving metadata if DNG is read-only, but since you're having a strange problem, I'd definitely make sure they are not read-only.
Note: Lr WILL read metadata from an xmp sidecar, *iff* it seems newer than what is embedded. So, IF you have xmp sidecars that have a recent modification date, or *maybe* (I don't really know) if Lr was NOT able to successfully embed metadata into your DNG, it could be reading some incompatible metadata from the xmp sidecar - thus the reason to get it out of the way to test.. -
Replace read character from file
HI,
I have updated my labview 2014 and have a load and save function wich not working on the new version.
It says that the read character from file is not supported any more.
How to i fix it to run in labview 2014?
Attachments:
Load.png 62 KB
Save.png 365 KBBob_Schor wrote:
Please do not attach tiny pictures of your VIs (I can't see them clearly). Instead, attach the VIs, themselves -- this lets us open them in LabVIEW, see if there are any broken arrows, read the error messages, and actually try your code (any test any fix we might suggest). Help us to help you.
Do you know about Snippets? This is what looks like a .PNG file, but can be dropped in a LabVIEW Block Diagram to become executable code. Find it on the Edit menu of the Block Diagram.
Bob Schor
HI,
OK, I have now attach my VIs.
//Ronny
Attachments:
Save.vi 11 KB
Load.vi 11 KB -
Error when reading data from socket
Hi,
I am getting the error 'NiRawReadError: An error occured when reading data from socket.' when using the ABAP API 'mo_core_service->invoke_matching'.
And I get this error only when I pass ABAP_TRUE to the paramter 'iv_wait_for_invocation' .
Can anybody help me in correcting this?Hi Narasa,
The following error is already in discussion in the below forum.Plz consult the forum link you will find the error solution.
Problem in ABAP API - NiRawReadError: error when reading data from socket
Rgds
Ankit -
I would like to read data from files in EJBS (Stateless Session Bean I think). I've heard that the EJB sepcifications don't allow to use the java.io package to access the filesystem. How can I resolve this problem? Possible solutions I've thought of are:
* Use a webserver to store the data
* put the files in a jar and access them using the getResource() in the classloader class
Could you comment on this plesae
greetingsThe specification states:
"An enterprise bean must not use the java.io package to attempt to access files and directories in the file system.
The file system APIs are not well-suited for business components to access data. Business components should use a resource manager API, such as JDBC, to store data."
From this I understand I cannot acces files directly, but it does not specifiy I can't use the java.io package at all. It specifically says not to use the java.io package to acces files and directories, they don't say anything about using the classes for other use.
however, a litle lower the specification states:
"The enterprise bean must not attempt to create a class loader; obtain the current class loader; set the context class loader; set security manager; create a new security manager; stop the JVM; or change the input, output, and error streams.
These functions are reserved for the EJB Container. Allowing the enterprise bean to use these functions could compromise security and decrease the Container�s ability to properly manage the runtime environment."
I'm not sure how to interpret this, but I believe this rule makes my solution invalid.
Please comment on this,
thanks -
Bug: Keywords behave incorrectly after "Read Metadata from File"
(Happens in LR3.4 RC and probably also in previous versions... but I am not sure if it happened in LR2)
The problem seems tro be somthing like de-sync of database status and what we see on the screen.
1) Let's say we have a photo with keyword "abc"
2) Click in the Keyword List on the arrow around the "abc" keyword to show only photos with this keyword (single one), leave the filter on this settings
2) Save Metadata to File
3) Edit XMP in an external application, add new keyword "def"
4) Read Metadate from File
5) Now what happens is: The photos disappers from the screen as if it lost the "abc" keyword (weird), but if you look at the Keyword List, the "abc" keyword has still 1 photo attached to it. Also, if you release the filter and find the photo, it clearly has the "abc" and "def" keywords in the Keywording panel. And you can search for this keyword in the text filter (works correctly), but if you click on the arrow around the "abc" keyword, the photo is not shown.
6) If you restart the Lightroom, it will work correctly again.
I have an own application that is able to modify the XMP and the modifications may not be perfect, but in my opinion, this shouldn't happen when reading the metadata. If any developer is reading this, I can supply a file with original and changed metadata for debugging.
It would be great it this could be resolved.
Thanks!Please do report your find with the details you state (well done!) here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Thanks......... -
Hi, I've been looking at some resources online but cant seem to understand it very well.
I have been given partially completed code from my lecturer, and i have to complete this code.
I'm not looking for solutions but if you would be so kind to either explain or point me into the direction of helpfull resources i would be very gratefull!
Heres my partially completed code:
public void load(File file){
String line;
String[] fields;
try {
BufferedReader in = new BufferedReader(new FileReader(file));
line = in.readLine();
this.setName(line);
line = in.readLine();
fields = line.split(",");
HeadOfSchool h = new HeadOfSchool(fields[0], fields[1], fields[2],
Integer.parseInt(fields[3]), Integer.parseInt(fields[4]));
// COMPLETE THE READING IN FROM FILE
// ADD YOUR CODE HERE
in.close();
} catch (IOException e) {
// ADD YOUR OWN CODE HERE
}Here is the contents of the file which is being read in:
The file which stores information about the school is as shown below
School of Computing
Prof Shirley Campbell,Aberdeen,female,45,45000
8
Dr John Smith,Aberdeen,male,40,28000
Dr Joan Simpson,Aberdeen,female,30,27500
Mr Tony Orlando,Banchory,male,40,27500
Dr Craig Stuart,Aberdeen,male,38,18500
Dr Moira Cables,Aberdeen,female,35,22500
Dr William Green,Aberdeen,male,38,35500
Mr Henry Brown,Aberdeen,male,37,27265
Ms Jill Blossom,Aberdeen,female,48,30000
Course UG1,4
Alan Smith,Aberdeen,male,35,A
Mary Grant,Banchory,female,25,B
Joe Bloggs,Aberdeen,male,42,A
Jack Hawkins,Stonehaven,male,30,C
Course UG2,5
Susan Clark,Aberdeen,female,18,C
Carol Roberts,Murcar,female,32,B
Roy Rogers,Ellon,male,37,B
Melanie Sykes,Murcar,female,22,A
Colin Firth,Aberdeen,male,27,A
Course UG3,3
Cindy Lauper,Aberdeen,female,27,A
Jim Bowen,Banchory,male,47,C
Andy Townsend,Arbroath,male,35,BFormat of the file:
The format if the file is
Name of school
Details of the Head of School
Number of Lecturers
List of Lecturers
Name of course1, number of students
List of Students
Name of course2, number of students
List of Students
Name of course2, number of students
List of Students
Name of course3, number of students
List of StudentsSorry if i havent supplied you with relevant details, just let me know if theres anything else i need to let you guys know
ThanksThe code given to you as an example demonstrates how to open the file, read a line of data from it, and split that line into parts.
You are given the format of the file, and example data.
So - given that you know how to read a line of data from the file and split it into parts, and given that you know what the lines of the file look like - can you write out in your native language what you need to do, using "read a line", "split the line into pieces", "use the nth piece" operators, to process the file? If you can, then do, and convert that to Java. If you can't, then you need to back up and understand your problem better, then try to write out your solution in your native language.
If you run into any specific, technical problems come back and ask away
Good Luck
Lee -
Error in reading data from InfoSet
Hi Experts,
I am facing the below errros when doing a selection to retraive data.
@5C\QError@ Error when reading data from InfoSet Z40_2 (return code 1) @5F\QNo long text exists@ 17:56:24 A Preparatory Steps 1 Selection and Bundle Formation 00000000000195819816 1 E /BA1/F3_BASIS 6 1 1
@5C\QError@ Data transfer structures in EWLS object do not match @5F\QNo long text exists@ 17:56:24 A Preparatory Steps 1 Selection and Bundle Formation 00000000000195819816 2 E /BA1/F3_EWLS 117 1 2
Please let us know if any one knows why tehse erros apear and sloution for these.
Please do the needful,'
Thanks,'Maheshthanks
-
Bug: "Read metadata from file"
When I add GPS coordinates to a file (with the program Geotagger) and select "read metadata from file" to import the new metadata, a color adjustment badge appears on the thumbnail (even though I didn't adjust any colors). This only happens with files that have a cropping applied to them in Lightroom. If the file doesn't have a custom cropping the color adjustment badge doesn't appear. It happens with both JPG and CR2 files. Seams like a bug to me.
I'm on a 24" iMac 2.8 with 4 GB and OSX 10.5.5 / Lightroom 2.1It also happens with DNG. Anyway, I don't think it has anything to do with the GPS, but the issue has been around right back through version 1.x Try the following:
1. Select an image that has no crops or develop adjustments
2. Switch to Develop module
3. Apply a crop
4. Save metadata to file (Cmd+S)
5. Read metadata back from file (Metadata menu - "Read Metadata from file"
Please report what happens?
At my end the Crop badge remains but a Develop Adjustment badge also appears - IMO it shouldn't, but as stated above it has for a VERY long time. I'll bug it again and see what happens. -
Hi Everybody,
I wonder if Lightroom 3 offers a function that lets me read metadata from file for multiple images in a batch process. The reason is that I have changed the GPS information for quite a couple of my pics using the Geoencoding Support pluging from Jeffrey Friedl and let it write back into the DNG-file. Since I also flushed the shadow data I can't see any GPS information in my metadata table in Lightrrom even though the data are present in the DNG. Now the real question is: Is there a better way to get my GPS data into Lightroom than emptying the Library and reimport all of my pics?
Oh, and before I forget it: Yes, I have searched this forum - and a couple of others as well - and I found stuff about batch processing date/time information. However, the method presented there apparently does not apply to my problem.
Thanks for any information.
Have a nice day,
f.In Library Module, select Grid Mode. Select all images you wish to read metadata from. Go to Metadata>Read Metadata from Files
Similarly, you can edit time for time zone/ AM-PM issues, etc by going to Metadata>Edit Capture Time -
Read metadata from file cancel modifications !
Hi,
I use Lightroom 1.1 in french. I made some photo (in raw but in jpeg the result is the same) and import them in Lightroom with conversion in DNG. In Lightroom, in develop module, I crop, change contrast and som others.
After that, I geotag my DNG files with HoudahGeo. HoudahGeo write geotag in the file. So back in Lightroom, I make a 'Read metadata from file' ('Lire les métadonnées depuis les fichiers' in french) for having geotag in Lightroom.
Geotag are now in Lightoom, nice, but in develop history, I have a new line 'Rénitialiser les paramètres' !!! So I can't see all my modifications... Is it normal ?
Thank you
PS: Sorry for my english...I think you should test this with one or two pictures - import/convert, save metadata to file, geotag, read metadata. Also try import/convert, make small adjustment, save metadata to file, geotag, read metadata. In iView I often write metadata to DNG's that have been adjusted, then read the metadata in Lightroom - sometimes I add more data in iView and do more adjustments.
I have seen the problem you describe, but it has been with raw files which I have adjusted in Lightroom but haven't saved out the metadata. I have then created an xmp sidecar in iView, and read the metadata in LR. So the sidecar had no ACR/LR instructions. The result was that my adjustments were wiped out. What I suspect is that something similar is happening with your DNGs - that conversion creates them but doesn't write the ACR/LR fields.
So try a few alternative sequences.
John
Maybe you are looking for
-
Unacknowledge shared variables (how to)
Hi everybody, I'm using LabVIEW 8.21 ald its corresponding DSC module in order to perform a standard SCADA system and there's a requirement from my client, taking into account the importance of correcting the alarmed signals, which is the following:
-
hi i've experienced a lag on phone i open my game and it displays only black screen and loading i tried this on different games but when i restart my phone it works and there is no problem. its because of the ram? btw soft reset (power+volume = res
-
Error Handling in Oracpe form 9.4.0
Hi, Have you got good documentaion about error handling in Oracle form 9.0.4? If yes, Could you let me know? Many thanks Michael
-
I have a iphone 4 ,version 4.3(8F190), When I click to General settings -there is no software update sign shown .It displays About,Usage, Network etc etc software update is missing.Need help guys! Operating system is 04.10.01(Modem Firmware)
-
Spotlight only displays PDFs - how to see all search types?
Problem: When I enter search criteria into spotlight, the results only show one type of search. For example, if PDFs are included in the preferences, I only see PDFs, not Documents and PDFs. Turning off PDF in the spotlight preferences, results in