Help - Error message during output

Dear Members of the Forum,
Could you please help me solve the following problem?
I output a project in Adobe Media Encoder CS3 in MPEG2-DVD format and ended up with two files: 'movie.m2v' video file and 'movie.wav' audio file. Then I input those two files as 'timeline' in Encore CS5, did the menus, etc. After checking the project for errors none were identified and I went on building the DVD disc. During the building process the following error messages occured:
'PGC "The Movie" has an error at 00;01;24;20.
Internal software error: %0, line The Movie Info: name=The Movie,
ref=Bpgc, time=00;01;24;20'
When I play the movie in Encore no error occurs at the specified above point of time (00;01;24;20) - there is a crossdissolve transition at this point.
Any ideas how to fix this problem or probably help how to interpret the error message?
Thank you!

Thank you Stan and Bill. I'll try to impliment your tips to save my project.
Before I do so I need to clarify some details:
1) what does it mean to 'have gaps in the Video' that both of you mentioned one should avoid? In my case I have two coherent video.m2v + audio.wav files that were output from Adobe Media Encoder. Both play just fine until I try to output them from Encore. Do you mean gaps between the movie files in the Premiere timeline?
2) Did I do the right thing importing both the .m2v and .wav files as 'import as Timeline' in Encore CS5? Or I should have imported them as 'Asset'? What I did basically when I started the project is I hit 'import as timeline' and then shift-selected both .m2v and .wav files -> the result was that they both appeared neatly lined-up in the Encore timeline and the playback was smooth.
3) If I fail to fix the above error, is there a way to build a 'play-all' DVD without menus in Premiere using the m2v and wav files I have? This is going to be my contingency plan.
Many thanks!
Regards,
Igor

Similar Messages

[HELP] Error message during installation / Message d'erreur pendant l'installation

FR:
Bonjour, aujourd'hui j'ai voulu installer la version d'essei d'adobe After effect, mais, à la fin du téléchargement, j'ai se message d'erreur:
Erreur lors de l'extraction du programme d'installation du produit (erreur 101); Vérifiez l'espace disque sur votre système et essayez de relancer le téléchargement du produit.
Mais se que je ne comprend pas, c'est qu'il me reste 59,2 Go d'espace disque libre.
Pouvez-vous m'aidez svp.
EN:
Hello, today I wanted to install the version of essei Adobe After Effects, but at the end of the download, I have error message:
Error when extracting the installer of the product (error 101); Check disk space on your system and try to restart the download of the product.
But I do not understand is that I have 59.2 GB of free disk space.
Can you help me please.
Cordialement,
DJJulien71
[email protected]

DJ_Julien71 wrote:
...at the end of the download, I have error message:
Error when extracting the installer of the product (error 101); Check disk space on your system and try to restart the download of the product.
But I do not understand is that I have 59.2 GB of free disk space.
Did you do what the error message told you to do? Did you restart the download? You don't say anything about it.

HT1386 I keep getting an error message during step 5 of 7 in syncing process, which tells me I have to enter my password, so I do, but it can't finish syncing. Help!!

I keep getting an error message during step 5 of 7 in syncing process, which tells me I have to enter my password, so I do, but it can't finish syncing. Help!!

What EXACTLY does the message say?

Error Message During Vista Install W/ Bootcamp

I crashed my original vista installation, so I am trying to get it up and running again. After deleting the old partition and creating a new one with BCA in Leopard, I get this error message during vista installation
Windows cannot install required files. The file does not exist. Make sure all files required for installation are available, and then restart installation. Error Code: 0x80070005
I thought maybe it was My Vista DVD, so I borrowed a friends, and it did the same thing. This is on a Macbook PRO purchased a little over a month ago.
Please HELP! I need my vista installation up and running for work!

"but when detecting hard drives, nothing shows up in the list."
I don't really understand that statement as without any drives showing up how were you able to even start the install?
At any rate, during your first installment, the one that succeded, do you remember which partition it was that you Formated with the windows installer? When you use Boot Camp to partition and install the windows os, BC sets the volume name to BOOTCAMP. As far as I know this is the one that you must use for your windows os. Before you can install windows though, you must use the windows installer to format it to NTFS <----- the format type depends on a at least a few conditions, the one that I can remember is partition size. I believe 32G and above it HAS to be NTFS. But my point is, if you try and use any other partition that might come up on your list besides the one that BC made for you, it will probably error out (if you even get anywhere at all with it). Do you know FOR SURE that you chose the correct partition to format? This is the only other possibility that I can come up with at the present time.

Error message during install

Anyone have a clue what to do? Keep receiving error message during install. Have disable firewall, no help. Here is the error message:
Error Microsoft.VC80.CRT.type="win32".version="8.0.50727.4053".publicKeyToken="1fc8b3 b9a1e18e3b".processorArchitecture="amd64".
HRESULT:0x8007054f
I uninstalled because Itunes would not upgrade. Now I can't install. I was able to install an older version, but couldn't access my music because it was an older version, so I uninstalled that and now have nothing. I would appreciate any help.
Thank you.

Glad to read that renaming trick helped to get iTunes installed for you. Your thread here is fine for more questions.
Search your hard drive for your music - it should still be there, but perhaps this fresh install of iTunes just isn't seeing it.
Find music: http://support.apple.com/kb/TS1408
You absolutely do NOT want to sync your iPhone with an empty iTunes library. It will erase everything. Apple only gives you one download and you need to make backups. I hope it is still on your PC! But at least you have it on your iPhone.
I don't think you synced your iPhone with your father's iTunes, or his music would be on it. Have a look in a folder named Previous iTunes Libraries. There might be an iTunes database ITL file in there that you can use.
They have names like "iTunes Library 2009-04-06.itl" which would be from April 6th, 2009.
Press and hold the shift key while starting iTunes, and when prompted, choose the most recent previous library. Does it show most of your music, and can you play some songs in iTunes OK?

"iTunes has stopped working" error message during syncing

I've downloaded the latest version of iTunes, and just started to download Podcasts. But now I get the error message during syncing....almost everytime. Is there a solution out there or update that I haven't downloaded??

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets.

Has anyone been able to upload an ibooks file with audio only files (m4a) in it? I keep getting the following error message during the upload in iTunes Producer: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets. then it names the file as an m4p file. Everything works beautifully on the iPad through Preview, and validates through iTunes Producer up until the attempted upload. If you've been able to accomplish this, please let me know how you prepared your audio files. Many thanks.

Hello Fellow iBook Authors!
Today I received the same error that you all have been discussing. I tried selecting the DRM
and this did not work for me, though I'm glad it did for some. Here's what I did as a work-around. . .
Since iBooks Author did not have a problem with Videos, I simply used one of my video programs, ScreenFlow to turn the audio into a video file m4v. I added an image and extended the length or timing of the image to span the length of the audio file. Then exported as an .mov. I then opened QuickTime and opened the file and exported the file to iTunes.
You can use iMovie, Camtasia or any other progam that will allow you to export the audio as a movie file. Does this make sense? I hope this helps, at least in the short-term.
Michael Williams

Missing MSVCR71.dll Error Message During Launch

I just wanted to pass along an error message that I have found the solution to and have passed onto Adobe through the bug submission process.
I have discovered a QuickTime Component that causes Adobe Encore CS5 to give an error message during launch. The Error message states “The file MSVCR71.dll could not be found. Please reinstall Adobe Encore to resolve the problem” (Well, it is something really close to that. I did not write down the error message before fixing the problem). There is an “OK” button below the message to continue loading Adobe Encore.
The error message is only displayed if all other CS5 programs are closed. During my findings, I discovered that if you open Adobe Encore CS5 through Premiere Pro CS5 or After Effects CS5 by using Dynamic Link, the error message will not be displayed.
The QuickTime Component that causes the error message is “XiphQT”, which is used to play Xiph formats in any QuickTime based application. The Component can be located here: http://www.xiph.org/quicktime/
When installing the latest version of the program “Juicer” from digital juice, the QuickTime Component is installed. Juicer will run without the Component, but gives a message that it is missing. I have removed the Component since I use Encore to a much greater extent.
To remove the XiphQT Component from QuickTime, you must remove it manually because when QuickTime is uninstalled, the Component is left behind and will be a part of future installations of QuickTime.
While the error message displayed during the launch of Adobe Encore CS5 is not detrimental, it can be frustrating, so I hope this may help others that receive the error message from above. I should also note that I am using Windows 7 Home Premium.

Greetings,
My solution was attributable to my firewall (Microsoft Defender) blocking TCP connections to QuckTime. Here's the steps that resolved my problems on CS5, Windows 7, 64 bit:
Control Panel
Windows Firewall
Advanced Settings
Outbound Rules
New Rule...
Program/Next
This program path: (use Windows Explorer to search)
c:\Program Files (x86)\Adobe\Adobe Bridge CS5\msvcr71.dll
Allow the connection
(Leave checks Domain, Private, Public)/Next
Name Description: (whatever you like - will display at top of Windows Firewall Advanced Security Outbound Rules)
Good luck, Michael

Error message during software updates

I am constantly receiveing the following error message during software updates. This time it happened with an HP printer update, but it has happened with iTunes and Safari as well. Does anyone know what I need to do?
The system extension “/System/Library/Extensions/GeneIOUSBCFSubclass.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update
Thanks!

Try using Help > Updates from one of your CS6 applications.
When you return home, you might try uninstalling CS6 and reinstalling it again. It sounds like some stuff may have become corrupted.

Error messages during vista startup

Hi,
i have strange error messages during Vista 65 loading. Everzthing going well but sistem is booting really slow.
Don't know how explain this except some screenshoots. They are uploaded on link under.
screenshoot1
http://www.shock.co.ba/DSC00116.JPG
screenshoot2
http://www.shock.co.ba/DSC00117.JPG

Hi dotshock,
try this procedure http://www.lancelhoff.com/2008/09/29/unrecognized-partition-table-for-drive-80/
Hope it helps
Stefan

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

Error message during cube creation

Hi expert,
System show the following error message during cube creation, please info how to solve this problem. Thanks.
Define the characteristics of the validity table for non-cumulatives
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.

Hi,
Go to the Extras Tab in the definition of the Cube and there select " Maintain Non-Cumulatives" and there select the Plant check box. You can also check Material but it is not recommended. Now try to activate the cube. I think it will work for you.

Error message during processing in BI

1.i am loading the data into infoobject.
2.got error in text data load.
3.master info object have compound obj 0COUNTRY
4.and other normal fields are 0TXTSH,0LANGU,sold-to-party.
5.there is no PSA in this..its direct update to INFOobject.
The error message is:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update
Diagnosis
There are duplicates of the data record 2. with the key '3.' for characteristic 1..
Procedure
If this message appears during a data load, maintain the attribute in the PSA maintenance screens. If this message appears in the master data maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.

Hi KP,
In the details tab,
1.under Transfer (IDOC and Trfc):
   Data Package 1 : arrived in BW ; Processing : Error records written to application log
2.Processing (data packet): Errors occurred
   Update ( 0 new / 0 changed ) : Errors occurred
   Error records written to application log
   0TRZONE : Data record 1 ('0000000001D ') : Duplicate data record
   0TRZONE : Data record 2 ('0000000002D ') : Duplicate data record
   Error 4 in the update
3. Process chain error
these are the error details.

Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

[Solved] 'New' error messages during init after updating initscripts

After updating to the latest initscripts, I got some error messages during init that I hadn't seen before. They occurred during one of the UDev steps, and were caused by an attempt to load an IDE module despite the controller being disabled. The controller shows up in Windows devmgr too, so I guess it's a failing of the mobo or BIOS.
In any case, I downgraded and found that the errors were nothing new. I'm just curious if the appearance of the errors during init was by design or a happy accident.
Last edited by alphaniner (2011-08-01 17:07:30)

alphaniner wrote:
karol wrote:If you have the new (i.e. current) initscripts, you should be fine:
http://projects.archlinux.org/initscrip … 328fbaf2e7
http://projects.archlinux.org/initscrip … 42dfeca8c2
I had never noticed the file before yesterday, actually. And I'm up-to-date, yet it's still full of 'em.
You need to reboot.
After you do, run
tail /var/log/boot
Mine isn't perfect, but I've already sent an e-mail to the dev (it's a matter of just a sed oneliner)
[karol@black ~]$ tail /var/log/boot
Tue Aug 2 05:03:01 2011: :: Setting Hostname: black ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Locale: pl_PL.UTF-8 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Setting Consoles to UTF-8 mode ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:01 2011: :: Loading Keyboard Map: pl ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Loading Console Font: Lat2-Terminus16 ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: :: Saving dmesg Log ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:02 2011: INIT: Entering runlevel: 3
Tue Aug 2 05:03:02 2011: :: Starting Syslog-NG ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:03 2011: :: Starting D-BUS system messagebus ^[[171G [BUSY] ^[[171G [DONE]
Tue Aug 2 05:03:04 2011: :: Starting acpid ^[[171G [BKGD] :: Starting gpm ^[[171G [BKGD^[[0;1

Help - Error message during output

Similar Messages

Maybe you are looking for