Help: Error message "ORA-12560 TNS:Protocol Adapter Error "
I tried to install Oracle 8i EE version 8.1.7 on Windows 2000. Everything is OK until the installation proceeded to installing "Oracle Database Configuration Assistant". At that point, I got an error message "ORA-12560 TNS:Protocol Adapter Error (network not loaded)". I looked up the error message. The cause of the error said: "This error occurs when the SQL*Net driver cannot find the JSB driver because you may have either forgotten to load the JSB driver (for instance MFTP) or used an incorrect TCP_VENDOR key (for example, TCP_VENDOR=NOVLWP).". And the suggested action said: "Load the JSB driver or use the correct TCP_VENDOR key.". I am using a standalone PC with Windows 2000 at home, and the PC does not connect to any network(except that I can dialup to internet via modem). What should I do? I can't understand the error message. Any expert to help me overcome the error?
null
database tnsnames.ora
=========
# TNSNAMES.ORA Network Configuration File: D:\Oracle\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = mohsin-pc)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = mohsin-pc)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
developer 10g tnsnames.ora
==============
# tnsnames.ora Network Configuration File: D:\Forms\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.132)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = Dedicated)
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = mohsin-pc)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
Please tell me what changes I needed
database serivice name is "ORCL'
and my pc name is "mohsin-pc"
Similar Messages
-
Hi All,
by the installation of R/3 4.6C for a pilot system for the upgtrade from 4.6C to ECC 6.0 the installation hangs at step:
Create SPFILE: (this step creates the oracle server profile (SPFILE) from the up to now used PFILE (ini<SID>.ora). -
when I try to connect to DB via: connect /as sysdba I get the error message:
ORA-12560: TNS: protocol adapter error.
I know this oracle file can means many things and the R/3 is running fine. I copied the brtool from source system but it does not help. Until now there is no data from source. Its a new installation and we want to fix this error before we began to copy the data to the pilot system.
Anyone from you has a good feedback for me?
Thanks in advance
AtikHi Thilip,
thank you for your reply.
1) Oracle Service are running fine:
- OracleJobschedulerSID ... disabled
- oracleSID102iSQL*plus .......manual
- oracleSID102TNSListener.... started
- OraclServiceSID ..................started
2) TNSnames.ora is ok:
Filename......: tnsnames.ora
Created.......: created by SAP AG, R/3 Rel. >= 4.0A
Name..........:
Date..........:
PLT.WORLD=
(DESCRIPTION =
(SDU = 32768)
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = bysapp1)
(PORT = 1527)
(CONNECT_DATA =
(SID = PLT)
(GLOBAL_NAME = PLT.WORLD)
3)The Listner is running:
see the services.
4) R3trans does not work: Error message is:
..:\usr\sap\PLT\sys\exe\run>r3trans -d
This is r3trans version 6.05 (release 46D - 30.09.03 - 16:30:42).
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
r3trans finished (0012).
I can see nothing wrong in this issue.
Thanks in advance.
Best regards
Atik -
ORA-12560 TNS protocol adapter error--URGENT HELP!
To Experts:
I tried to log in the SQL by using the username: system, manager for password. however, it gave me the message:
ORA-12560 TNS protocol adapter error.
I am using Oracle 9i and Developer 6 in Wins XP environment.
Thank you much!Yes,Thank you very much.I am ok to invoke these commands.
the listener started already.The listener name is just LISTENER.But i still can't login sql plus.Help me on.
hi,Mr sb92075
Do you use what kind of messenger?If we can communicate on messenger,it will facilitate solving my problem I think.I don't mean to disrespect you but I just want to overcome the problem very quickly.
with best regards,
Ian Su
Can I know very clearly?
what are the things(eg dbname,username,protocol I don't know exactly just guessing)needed to connect to the database?
I already installed oracle developer suite 10 and oracle 10g xe database server.
I can't login to sqlplus and what are the things i need to check to get connected to the database from sqlplus?
I appreciate your help and need somebody help.
Edited by: Ian Su on Jun 18, 2011 11:21 PM
Edited by: Ian Su on Jun 18, 2011 11:29 PM -
ORA-12560 TNS:Protocol Adapter Error and ORA-12557 Error
Hello ,
I have installed Oracle 11.2.0 64 bit database on my Windows 7 ( Home Premium) PC which is also 64 bit. I installed it because I am trying to setup Informatica. Later, I learnt that informatica is 32 bit and can not communicate to Oracle 11.2.0 64 bit database. So after digging through solutions, someone mentioned that I need to install Oracle 11g client 32bit.
I have installed 11g client software successfully now. Here is problem though :
When I launch SQL-Plus from 11g database , it works fine. However I launch SQL-Plus from 32bit client it gives me error as :
Ora-12560 :TNS: Protocol Adapter Error.
So I have been trying to resolve this error. I saw that this question has been posted many many times and have tried many thing as listed below :
1. copy tnsnames.ora from database ( dbhome_1) to client installation ( client_1 ) under ..\network\admin\ --- Didn't work.
2. Set $ORACLE_HOME and $ORACLE_SID environment variable.
Here is interesting fact - If I set $ORACLE_HOME to database path and not client path error changes to :
ORA-12557 TNS: Protocol adapter not loadable.
If I keep $ORACLE_HOME as client path then I get same error as earlier ORA-12560.
3. I have also tried changing $PATH variable. I did set to path containing only database installation, only client installation, both database and client installation with database installation appearing first
But all of these haven't worked.
Can anyone please suggest what I am missing and any further things I could try ?
Thank you in advance !982090 wrote:
Hello ,
I have installed Oracle 11.2.0 64 bit database on my Windows 7 ( Home Premium) No oracle product is certified to run on any 'home' edition of any version of Windows.
PC which is also 64 bit. I installed it because I am trying to setup Informatica. Later, I learnt that informatica is 32 bit and can not communicate to Oracle 11.2.0 64 bit database.If the connection is via TNS, the bit architecture shouldn't matter.
So after digging through solutions, someone mentioned that I need to install Oracle 11g client 32bit.
I have installed 11g client software successfully now. Here is problem though :
When I launch SQL-Plus from 11g database , it works fine. However I launch SQL-Plus from 32bit client it gives me error as :
Ora-12560 :TNS: Protocol Adapter Error.
So I have been trying to resolve this error. I saw that this question has been posted many many times and have tried many thing as listed below :
1. copy tnsnames.ora from database ( dbhome_1) to client installation ( client_1 ) under ..\network\admin\ --- Didn't work.
2. Set $ORACLE_HOME and $ORACLE_SID environment variable.
Here is interesting fact - If I set $ORACLE_HOME to database path and not client path error changes to :
ORA-12557 TNS: Protocol adapter not loadable.
If I keep $ORACLE_HOME as client path then I get same error as earlier ORA-12560.
3. I have also tried changing $PATH variable. I did set to path containing only database installation, only client installation, both database and client installation with database installation appearing first
But all of these haven't worked.
Can anyone please suggest what I am missing and any further things I could try ?
Thank you in advance !unfortunately, we need to know exactly how you tried to connect with sqlplus when it "worked" and when it "didn't work". The key to the reported error messages is highly dependent on the environment settings AND the specification of the connect string. A copy and paste of the entire command line session would be most helpful.
But again, running on any 'home' edition of windows is not supported. -
Facing a error ORA-12560: TNS:protocol adapter error
Hi All,
Recently I have installed oracle 11gr2 on 64 bit solaris machine .During Installation i didnt get any error but when ever I am trying to create create a database Using DBCA I am getting a error as ORA-12560: TNS:protocol adapter error .The same error I am getting when ever trying to create the DB manually.
As I am new to this 11gr2 in solaris machine ,any help in this matter will be very helpfull for me.
With Regards,
SujitI started the listener then also i am getting the same error.
below is listener status after starting that
LSNRCTL> start
Starting /export/home/app/oracle/product/11.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Solaris: Version 11.2.0.1.0 - Production
Log messages written to /export/home/app/oracle/diag/tnslsnr/Blrbalidev3/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Blrbalidev3)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 11.2.0.1.0 - Production
Start Date 10-FEB-2010 13:41:07
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /export/home/app/oracle/diag/tnslsnr/Blrbalidev3/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Blrbalidev3)(PORT=1521)))
The listener supports no services
The command completed successfully
Regards,
Sujit -
ORA-12560 TNS protocol Adapter error in 11g (11.1.0.6)
Hello All,
I have Oracle 11g installed on my machine and when i tried to log in to sql plus i got the error below:
ORA-12560 TNS protocol Adapter error
By setting the ORACLE_SID = orcl by browsing to the bin directory of Oracle Installation the above error disappaears and i am able to log in from sql plus.
My intention is to create a db backup for which i am trying to use the exp command...this time the same error appears.
Also the solution of setting the ORACLE_SID is cumbersome..everytimt i want to use sql plus i need to go in and set the ORACLE_SID.
Can anybody please help me out find a good solution for this?
Any help would be appreciated friends.....
Thanks in Advance!!!!!
Regards.
AliciaAlso the solution of setting the ORACLE_SID is cumbersome..everytimt i want to use sql plus i need to go in and set the ORACLE_SID.
Can anybody please help me out find a good solution for this?The solution depends on your (not specified) operating system...
Anyway, if you have more than one database it's normal that you have to set ORACLE_SID, if not how can Oracle know which database you want to access to ?
You can create batch files, one per database, or you can use connection strings, e.g. sqlplus username/password@<DB>. -
ORA-12560:TNS protocol adapter Error while upgrading oracle 8i to Oracle 9i
Hi,
I am updrading My oracle 8i setup to Oracle 9i in the Windows operaton System.During the upgradation in the Database upgrade Assistant,The installer asked for the system authetication for upgrading the existing database.After proving the Username and password i am getting an error as ORA-12560:TNS protocol adapter Error .Please help me about what do I need to modify.
Thanks in Advance,
AnjelaHi,
Here are the output
SQL> select * from v$version;
BANNER
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
PL/SQL Release 8.1.7.0.0 - Production
CORE 8.1.7.0.0 Production
TNS for 32-bit Windows: Version 8.1.7.0.0 - Production
NLSRTL Version 3.4.1.0.0 - Production
SQL> select version from v$instance;
select version from v$instance
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> select comp_id,version,status from dba_registry;
select comp_id,version,status from dba_registry
ERROR at line 1:
ORA-00942: table or view does not exist
Thanks,
Anjela -
ORA-12560: TNS:protocol adapter error from ADO ODBC connection in Access VB
I have an MS Access 2000 VB module that loads data from Access into an Oracle database. This worked when Access was 97 using DAO and Oracle RDBMS was 8i. Now, the database has been upgraded to 9i and Access has been upgraded to 2K using ADO. The error occurs at the time of connection. Here is my code:
Const OracleDBConnectParm As String = _
"DSN=tracDemo;USER ID=tracGoldDev;PASSWORD=tracGoldDev;"
StrSQL = OracleDBName
errstr = "Open DB: " & OracleDBConnectParm
Set Oracledbs = New ADODB.Connection
With Oracledbs
.Provider = "MSDAORA.1"
.ConnectionString = StrSQL
.Open
End With
The error I receive is:
1/6/2003 1:09:12 PM (Main)
Opening Databases
Table:<Open DB: DSN=tracDemo;USER ID=tracGoldDev;PASSWORD=tracGoldDev;> Keys:<: >
VB Error (-2147467259): ORA-12560: TNS:protocol adapter error
My SQLNet.log shows the following:
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleORCL)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=C:\Program Files\Microsoft Office\Office\MSACCESS.EXE)(HOST=GC88X11)(USER=montolchik))))
Long postings are being truncated to ~1 kB at this time.I need to connect to Oracle tables from within Access Data Project (ADP). I can connect fine from within regular Access .mdb Front End. When I enter the Oracle Server name in the Data Link Properties box I get error
"Test connection failed because of an error initializing the provider.(DBNETLIB]
Suggestions
Thanks! -
I checked a lot of forums out here but no satisfying answers.
I'll go with the summary again.
I have Windows XP.
First I installed Oracle 9i on E drive for practice purpose. The installation was done successfully. I opened Internet explorer. Typed "http://hash/isqlplus" in the address bar and pressed enter. The page displayed and I logged in. Logging in was successful.
Now I installed the Developer Suite on the C drive. Installation was complete. Everything seemed fine but when I tried logging into my isqlplus again it started giving me an error saying "ORA-12560: TNS:protocol adapter error"
I have no idea how to go ahead with this.
Will be thankful if someone could clear this up.
Thanks.
Hashem.If you search more, you would have seen loads of answers.
You now have more than one ORACLE_HOME and your latest install will be the current default ORACLE_HOME.
If your have not set TNS_ADMIN, all Oracle Installations on your server will be looking for the Listener (and tnsnames) on your default ORACLE_HOME which I guess will be the ORACLE_HOME of the Developer Suite.
So set TNS_ADMIN on th environment settings on the server to point to the correct place -
Help: ORA-12560: TNS:protocol adapter error
I created a new database and afterwards my established TNS connection to my starter database was lost. Now I cant get it to work. I tired deleting the new database I created, but my old connection with my starter db still does not work. When I test the connection using the NET 8 assistant I get the following error: ORA-12560: TNS:protocol adapter error.
Im fairly new to Oracle8i and Ive posted numerous threads elsewhere concerning my problem but so far I havent gotten a solution. Any ideas?
Thanks, Andrew
nullEdwin,
1. I can ping my server.
2. I reinstalled Oracle8i entirely on the server I still could not connect.
3. I installed Oracle8i client on a totally new client I still could not connect.
On thing though, when I de-installed all Oracle products and then reinstalled Oracle, some of my settings from the previous install still existed. Ex: When I opened Net 8 Assistant some of my Net Service Names remained from the previous install.
Three things I think I can rule out as causes:
a) It seems really significant that from the server I can successfully connect through the TNS connection. And this is using the exact same TNANAMES.ORA file that is on my client machine. This leads me to believe that my TNSNAMES.ORA file is not the cause of the problem.
b) Also the fact that the new client install (3) didnt work makes me think for sure that it is not the client.
c) When I open SQL Plus on the server I type ORACLE4 for the host string and I get right in. This leads me to believe that the instance and database can be ruled out as possible causes.
In the Oracle Client Net8 Profile section I set tracing to on. I am posting the results. Also FYI: I am the only person that has been working with Oracle on the server. Any ideas??? Andrew
--- TRACE CONFIGURATION INFORMATION FOLLOWS ---
New trace stream is "C:\Oracle\Ora81\NETWORK\trace\sqlnet79.trc"
New trace level is 4
--- TRACE CONFIGURATION INFORMATION ENDS ---
nigini: Count in NI global area now: 1
nigini: Count in NI global area now: 1
nrigbni: Unable to get data from navigation file tnsnav.ora
niotns: niotns: setting up interrupt handler...
niotns: Not trying to enable dead connection detection.
niotns: Calling address: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleORCL)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')))(CONNECT_DATA=(SID=ORCL)(CID=(PROGRA M=C:\PROGRAM FILES\ORACLE\JRE\1.1.7\BIN\JREW.EXE)(HOST=ANDY)(USER=andrew))))
nscall: connecting...
nsopen: opening transport...
nserror: nsres: id=0, op=65, ns=12547, ns2=12560; nt[0]=517, nt[1]=0, nt[2]=0
nsopen: unable to open transport
nioqper: error from nscall
nioqper: nr err code: 0
nioqper: ns main err code: 12547
nioqper: ns (2) err code: 12560
nioqper: nt main err code: 517
nioqper: nt (2) err code: 0
nioqper: nt OS err code: 0
niqme: reporting ns (2) error: (12547) as rdbms err (12547)
niotns: Couldn't connect, returning 12547
nigtrm: Count in the NI global area is now 0
nigtrm: Count in the NL global area is now 0
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ekessels (Edwin Kessels):
Try to install the Net8 Server and Client again. Also make sure you can ping the IP-adres of servername using the PING-command.
Edwin Kessels
OCP-DBA
<HR></BLOCKQUOTE>
null -
Unable to create database due to ORA-12560, TNS protocol adapter error
Hello,
I'm trying to create an 8.1.7.0 database on a W2k server, but it is failing because as soon as svrmgrl is launched, I get an ORA-12560, TNS: protocol adapter error:
D:\oracle\db_creation_scripts>D:\oracle\ora81\bin\svrmgrl @D:\oracle\db_creation_scripts\mterm62run.sql
Oracle Server Manager Release 3.1.7.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
ORA-12560: TNS:protocol adapter errorEcho ON
SVRMGR> connect INTERNAL/manager
ORA-12560: TNS:protocol adapter error
SVRMGR> startup nomount pfile="D:\oracle\admin\mterm62\pfile\initmterm62.ora"
LCC-00161: Message 161 not found; product=RDBMS; facility=MGR
My ORACLE_HOME, ORACLE_SID, and TNS_ADMIN environmental variables are correctly set, and I'm able to tnsping the listener.
I've enabled tracing, and my client trace file is:
--- TRACE CONFIGURATION INFORMATION FOLLOWS ---
New trace stream is d:\trace\client_trace.log_2084_9.trc
New trace level is 6
--- TRACE CONFIGURATION INFORMATION ENDS ---
--- PARAMETER SOURCE INFORMATION FOLLOWS ---
Attempted load of system pfile source d:\oracle\ora81\network\admin\sqlnet.ora
Parameter source loaded successfully
Attempted load of local pfile source D:\oracle\db_creation_scripts\sqlnet.ora
Parameter source was not loaded
-> PARAMETER TABLE LOAD RESULTS FOLLOW <-
Successful parameter table load
-> PARAMETER TABLE HAS THE FOLLOWING CONTENTS <-
TRACE_DIRECTORY_SERVER = d:\trace
TRACE_DIRECTORY_CLIENT = d:\trace
NAMES.DIRECTORY_PATH = (TNSNAMES, HOSTNAME)
SQLNET.CRYPTO_SEED = 4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf
TRACE_FILE_CLIENT = client_trace.log
TRACE_FILE_SERVER = server_trace.log
SQLNET.AUTHENTICATION_SERVICES = (NTS)
TRACE_UNIQUE_CLIENT = on
TRACE_LEVEL_CLIENT = ADMIN
TRACE_LEVEL_SERVER = ADMIN
--- PARAMETER SOURCE INFORMATION ENDS ---
--- LOG CONFIGURATION INFORMATION FOLLOWS ---
Log stream will be "D:\oracle\db_creation_scripts\sqlnet.log"
Log stream validation not requested
--- LOG CONFIGURATION INFORMATION ENDS ---
nigini: entry
nigini: Count in NI global area now: 1
nigini: Count in NI global area now: 1
nrigbi: entry
nrigbni: entry
nrigbni: Unable to get data from navigation file tnsnav.ora
nrigbni: exit
nrigbi: exit
nigini: exit
niqname: Hst is already an NVstring.
niqname: Inserting CID.
niotns: entry
niotns: niotns: setting up interrupt handler...
niotns: Not trying to enable dead connection detection.
niotns: Calling address: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleMTERM62)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')))(CONNECT_DATA=(SID=MTERM62)(CID=(PROGRAM=D:\oracle\ora81\bin\SVRMGRL.EXE)(HOST=SERV0354)(USER=tarisa))))
nsmal: 140 bytes at 0x12493f0
nscall: connecting...
nladini: entry
nladini: exit
nladget: entry
nladget: exit
nlpcaini: entry
nlpcaini: prg =
nlpcaini: arg[0] =
nlpcaini: arg[1] =
nlpcaini: exit
nsmal: 420 bytes at 0x12542f0
nsmal: 1712 bytes at 0x12572f0
nsopen: opening transport...
ntpcon: entry
ntpcon: toc = 1
sntpcall: entry
snlpcss: entry
ntpcon: exit
nserror: nsres: id=0, op=65, ns=12560, ns2=0; nt[0]=530, nt[1]=2, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsopen: unable to open transport
nsmfr: 1712 bytes at 0x12572f0
nsmfr: 420 bytes at 0x12542f0
nladget: entry
nladget: exit
nsmfr: 140 bytes at 0x12493f0
nladtrm: entry
nladtrm: exit
nioqper: error from nscall
nioqper: nr err code: 0
nioqper: ns main err code: 12560
nioqper: ns (2) err code: 0
nioqper: nt main err code: 530
nioqper: nt (2) err code: 2
nioqper: nt OS err code: 0
niomapnserror: entry
niqme: entry
niqme: reporting NS-12560 error as ORA-12560
niqme: exit
niomapnserror: returning error 12560
niomapnserror: exit
niotns: Couldn't connect, returning 12560
niotns: exit
nigtrm: Count in the NI global area is now 0
nnfgdei: entry
nrigbd: entry
nrigbd: exit
nigtrm: Count in the NL global area is now 0
My tnsnames, listener and sqlnet.ora files are very simple:
## BEGIN TNSNAMES.ORA
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
MTERM62 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.1.75)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = mterm62)
(INSTANCE_NAME = mterm62)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.1.75)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = mterm62)
(PRESENTATION = http://admin)
# LISTENER.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = serv0354)(PORT = 1521))
SID_LIST_LISTENER =
(SID_DESC =
(ORACLE_HOME = D:\oracle\ora81)
(SID_NAME = mterm62)
TRACE_LEVEL_LISTENER = ADMIN
# SQLNET.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\sqlnet.ora
# Generated by Oracle configuration tools.
TRACE_DIRECTORY_CLIENT = d:\trace
TRACE_UNIQUE_CLIENT = on
TRACE_DIRECTORY_SERVER = d:\trace
SQLNET.AUTHENTICATION_SERVICES= (NTS)
TRACE_FILE_CLIENT = client_trace.log
TRACE_FILE_SERVER = server_trace.log
TRACE_LEVEL_CLIENT = ADMIN
TRACE_LEVEL_SERVER = ADMIN
NAMES.DIRECTORY_PATH= (TNSNAMES, HOSTNAME)
SQLNET.CRYPTO_SEED = 4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf
Does anyone have any ideas what else I can check. I'm a Unix person, not a Windows person, which is making it even more complicated. If I was on Unix, I'd just blow everything away and start again from scratch, but since I'm not sure how to remove all traces from the registry, etc., I don't want to try that on this machine. There was already one other database created, but it's not goign to be used.
Any help would be greatly appreciated.
regards,
Tarisa.hi,
thanks for the info. the problem, as it turns out, was that I was connected to the db server via a terminal service (Microsoft Management Console), which for some reason caused probelms with TNS. After I connected directly to the machine using VNC, I was able to create the database with no problems. strange but true.
regards,
Tarisa. -
Oracle 9i database server ORA-12560: TNS: Protocol adapter error ?
My OS windows xp 2002 sp2. im using oracle 9i database server .I cant login Oracle sql * plus when in going Enter user name and password “ scott and tiger “ then I got problem here is the message is below :
SQL*Plus: Release 9.0.1.0.1 - Production on Sat Mar 13 03:12:47 20
(c) Copyright 2001 Oracle Corporation. All rights reserved.
Error :
ORA-12560: TNS: Protocol adapter error
Any one help me please. Please let me know how can I slove or fix the problem ?
how can im going to login Oracle 9i database Sql Plus ? anywany other fix this problem ?
Edited by: shajib on Mar 12, 2010 1:31 PMStep 1 - from a command line on the database machine, enter 'lsnrctl status' and report the output
Step 2 - display the contents of the %ORACLE_HOME%\network\admin\tnsnames.ora file on the machine running sqlplus.
These are the first two stepo, whether on the database machine or in a traditional client-server configuration. -
ORA-12560: TNS:protocol adapter error rman
hello all,
i am on xp, and 10.2 oracle version....i created a dummy database with name comp using dbca...used FRA and took a backup though rman....i have teh backup now in FRA....
I droped the database to do a test restore...but i cant even login to rman or sqlplus ??? i was able to login to rman before to take a backup....but now i cant.... could not figure out why...any help would be appericiated....
C:\oracle\sql>set ORACLE_SID=comp
C:\oracle\sql>
C:\oracle\sql>echo %ORACLE_SID%
comp
C:\oracle\sql>rman target /
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Jul 6 09:54:16 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12560: TNS:protocol adapter error
C:\oracle\sql>
C:\oracle\sql>
C:\oracle\sql>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 06-JUL-2011 09:54:20
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxxxxxxxx)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 06-JUL-2011 09:53:53
Uptime 0 days 0 hr. 0 min. 26 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Listener Log File C:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxxxxxx)(PORT=1521)))
Services Summary...
Service "COMP" has 1 instance(s).
Instance "COMP", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
C:\oracle\sql>user8363520 wrote:
hello all,
i am on xp, and 10.2 oracle version....i created a dummy database with name comp using dbca...used FRA and took a backup though rman....i have teh backup now in FRA....
I droped the database to do a test restore...but i cant even login to rman or sqlplus ??? i was able to login to rman before to take a backup....but now i cant.... could not figure out why...any help would be appericiated....
If you have backup and you dropped database then you can create it again.
1) Create directories for background,user,audit dumpdest and control,online log,datafiles.
2) Create OracleServiceComp if that is not exists using ORADIM utility(oradim -new -sid COMP -intpwd <syspass> -pfile <pfile location>)
3) After starting oracle service
set ORACLE_SID=COMP
rman target /
/*if you do not have spfile also then you have to restore it from
full/auto backup or startup database using pfile(create it manually)*/
startup nomount ;
restore controlfile from 'full or autobackup location';
alter database mount;
catalog start with 'backup location';
restore database;
recover database;
alter database open resetlogs; -
ORA-12560: TNS: protocol adapter error while linking tables in Access
One of my app dev is encountering an interesting error message while linking Oracle tables from Access. I am not able to able to reproduce this in my desktop or anywhere else. Details enclosed. Can you guys point me to a solution? Thanks in advance!
ODBC: Oracle Client version 10.2.0.1
Desktop : Win XP ; Access 2003
=>Able to login to the Oracle database sucessfully using sqlplus.
=>Able to create an ODBC datasource to Oracle database.("Test Connection" works fine)
=>But encountering the TNS protocol adpater error while linking the table(Access->File->Get External Data-> Link tables).
=>Not able to link any table in any schema in any Oracle database. Hence this is not a data centric issue.
What did I do?
=> Uninstalled Oracle 8 client and installed Oracle 10 client. No luck. Encountering the same error.
=> Turned on the ODBC trace and reproduced the error. The log is enclosed:
MSACCESS 79c-ed4 ENTER SQLAllocEnv
HENV * 0013C620
MSACCESS 79c-ed4 EXIT SQLAllocEnv with return code 0 (SQL_SUCCESS)
HENV * 0x0013C620 ( 0x09d31788)
MSACCESS 79c-ed4 ENTER SQLAllocConnect
HENV 09D31788
HDBC * 0013C730
MSACCESS 79c-ed4 EXIT SQLAllocConnect with return code 0 (SQL_SUCCESS)
HENV 09D31788
HDBC * 0x0013C730 ( 0x09d31830)
MSACCESS 79c-ed4 ENTER SQLSetConnectOption
HDBC 09D31830
SQLINTEGER 103 <SQL_LOGIN_TIMEOUT>
SQLPOINTER 0x00000014
MSACCESS 79c-ed4 EXIT SQLSetConnectOption with return code 0 (SQL_SUCCESS)
HDBC 09D31830
SQLINTEGER 103 <SQL_LOGIN_TIMEOUT>
SQLPOINTER 0x00000014 (BADMEM)
MSACCESS 79c-ed4 ENTER SQLSetConnectAttrW
SQLHDBC 09D31830
SQLINTEGER 30002 <unknown>
SQLPOINTER [Unknown attribute 30002]
SQLINTEGER -3
MSACCESS 79c-ed4 EXIT SQLSetConnectAttrW with return code 0 (SQL_SUCCESS)
SQLHDBC 09D31830
SQLINTEGER 30002 <unknown>
SQLPOINTER [Unknown attribute 30002]
SQLINTEGER -3
MSACCESS 79c-ed4 ENTER SQLDriverConnectW
HDBC 09D31830
HWND 001D04E4
WCHAR * 0x74329A38 [ -3] "******\ 0"
SWORD -3
WCHAR * 0x74329A38
SWORD 2
SWORD * 0x00000000
UWORD 1 <SQL_DRIVER_COMPLETE>
MSACCESS 79c-ed4 EXIT SQLDriverConnectW with return code -1 (SQL_ERROR)
HDBC 09D31830
HWND 001D04E4
WCHAR * 0x74329A38 [ -3] "******\ 0"
SWORD -3
WCHAR * 0x74329A38
SWORD 2
SWORD * 0x00000000
UWORD 1 <SQL_DRIVER_COMPLETE>
DIAG [S1000] [Oracle][ODBC][Ora]ORA-12560: TNS: protocol adapter error (12560)
DIAG [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed (0)
DIAG [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed (0)
MSACCESS 79c-ed4 ENTER SQLErrorW
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638
WCHAR * 0x047EE8B8
SWORD 4095
SWORD * 0x0013C624
MSACCESS 79c-ed4 EXIT SQLErrorW with return code 0 (SQL_SUCCESS)
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638 (12560)
WCHAR * 0x047EE8B8 [ 126] "[Oracle][ODBC][Ora]ORA-12560: TNS: protocol adapter error\ a\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0\ 0"
SWORD 4095
SWORD * 0x0013C624 (126)
MSACCESS 79c-ed4 ENTER SQLErrorW
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638
WCHAR * 0x047EE950
SWORD 4019
SWORD * 0x0013C624
MSACCESS 79c-ed4 EXIT SQLErrorW with return code 0 (SQL_SUCCESS)
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638 (0)
WCHAR * 0x047EE950 [ 66] "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed"
SWORD 4019
SWORD * 0x0013C624 (66)
MSACCESS 79c-ed4 ENTER SQLErrorW
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638
WCHAR * 0x047EE9E6
SWORD 3944
SWORD * 0x0013C624
MSACCESS 79c-ed4 EXIT SQLErrorW with return code 0 (SQL_SUCCESS)
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638 (0)
WCHAR * 0x047EE9E6 [ 66] "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed"
SWORD 3944
SWORD * 0x0013C624 (66)
MSACCESS 79c-ed4 ENTER SQLErrorW
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638
WCHAR * 0x047EEA7C
SWORD 3869
SWORD * 0x0013C624
MSACCESS 79c-ed4 EXIT SQLErrorW with return code 100 (SQL_NO_DATA_FOUND)
HENV 09D31788
HDBC 09D31830
HSTMT 00000000
WCHAR * 0x0013C5EC (NYI)
SDWORD * 0x0013C638
WCHAR * 0x047EEA7C
SWORD 3869
SWORD * 0x0013C624
MSACCESS 79c-ed4 ENTER SQLFreeConnect
HDBC 09D31830
MSACCESS 79c-ed4 EXIT SQLFreeConnect with return code 0 (SQL_SUCCESS)
HDBC 09D31830
Edited by: user5598619 on Feb 10, 2009 5:37 PMThanks a lot for your quick reply.
I've read all the posts mentioned (quite a few more) but I couldn't find any suggested solution to the "non-oracle10g"-problem other than using the global db name instead of the sid - which didn't help in our case:
However, in a last desperate attempt to solve the problem on my own before launching another cry-for-help-post I did try running the configuration assistant using the correct password for the SYS user 8-} and - strange but true - it did work :-)
Needless to say: I used the global db name of course, so I can't say what would have happened without it, but I trust your hint was a legitimate one.
Anyway - I gues that error Message concerning a "non-oracle10g database" was slightly misleading in this case.... grrrr.
Andreas -
ORA-12560: TNS:protocol adapter error while running Oracle Form 10g over IE
Hi,
I am getting the following error message while running my form over Internet Explorer. What could be the error and the solution.
ORA-12560: TNS:protocol adapter error
I am using the same user id/password that i used to create the database.
Plz help.
thanks,
RVunless you defined the TWO_TASK in your environment, you might need to provide it during the login. The typical Forms login screen has 3 fields, username/password and TWO_TASK , which is the alias used for the database server in the tnsnames.ora file on your end. If you are using iAS forms, then a proper RAD (Resource Access Descriptor) needs to be created by the DBA or whoever manages the iAS server. This is only if SSO is utilized, if not, then you need to provide TWO_TASK as well.
Hope this proves useful
R/ Zafer
Maybe you are looking for
-
Importing gif file to ImageIcon
Hi, I am trying to use a gif file that I have included in my project (using Windows XP). I am trying to stick the image from the gif file into a ImageIcon variable, and sticking the variable into a label. Here is the code that I am using to have the
-
My icloud songs have disappeared off of my laptop, what can i do to get them back?
I just set up a new windows laptop, when i downloaded the new itunes it had all of my songs on which were from my icloud account. I then plugged in my iphone 5 to the laptop and pressed sync. The music that had been on my itunes was then all delted a
-
NO Authorization .. EYE 007 -- Need inputs - still issue is there
Hi Experts, i am very new to BI Authorization, can anyone help me to solve this issue.. <b>I have gone through the SDN Links,</b> I have a Authorization Issue,<b> NO Authorization </b> Error : <b>EYE 007 ( Insufficient Authorizations )</b> I ha
-
Stored Procedure for Blocking from using a Specific Warehouse in any transaction
Hi, Is it possible to write a SP from using a Specific Warehouse in any transaction ?
-
Problem inserting .swf in dreamweaver 8.Help!!
Hi everybody.I have a problem since a lot of time jaja.I habe problems inserting .swf files in dreamweaver 8.I can insert, when I press f12 to see in Internet Explorer you see the movie, but when you put mouse over the banner I design.This has a bad