Help! error occured when activating DataSource 2LIS_06_INV
Hi,experts
When activating BI content DataSource 2LIS_06_INV, one warning message populated, 'the text of DataSource 2LIS_06_INV is not maintained in language D ' , and this caused the failure of activating 2LIS_06_INV,
please somebody offer me help, how could I correct it? Thanks, _
Hi Wilson,
Similar issue I was resolved with help of basis team.
They used SO10 transaction code creation of standard text for desired client.
Please take help from Basis Team.
Regards,
BBC
Similar Messages
-
Why does the message "an error occurred during activation. try again." keep coming up. I have tried to log in with a different Apple ID and when I pick the e-mail that I would like to receive messages, it sends and allert that states, "unable to verify email because it is already in use."
How do I log back in?See if this previous discussion helps.
Can't Activate FaceTime -
Just purchased this product, verified my email, payment taken etc., etc., but keep getting a message when trying to convert a doc saying an error occured when signing in. I have siged out and signed in again - no avail. Any help would be much appreciated. Thanks
Hi there Katie,
I just checked your account, and see that it's active. Are you trying to sign in via Adobe Reader? If so, please choose Help > Check for Updates in Reader and make sure that it-s up-to-date. The most current version, 11.0.07, should alleviate that sign-in error.
Best,
Sara -
Any solution after updating to ios 7 on 3 ipods for my daughters one of them when trying to sign into facetime is saying an error occurred during activation. Try again. I have tried logging out of all devices and turning this one on first again but no luck.Any help out there greatly appreciated desperate mom....
Any solution after updating to ios 7 on 3 ipods for my daughters one of them when trying to sign into facetime is saying an error occurred during activation. Try again. I have tried logging out of all devices and turning this one on first again but no luck.Any help out there greatly appreciated desperate mom....
-
Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?
I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?
-
i have cc but lights room is coming up with ,An error occurred when attempting to change modules. can you help please
Error changing modules | Lightroom
Mylenium -
Help with "An error occurred when attempting to change modules"
Hi! I installed LR v2.6.632038 and I received " An error occurred when attempting to change modules" I could not do anything to make it work so I uninstalled it and then tried to reinstall. I never got to enter my serial number so I do not know if it ever uninstalled completely or if I needed to??? I have Mac OSX version 10.6.2 if that helps Thanks! Kim
Error changing modules | Lightroom
Mylenium -
I did try in all of them and it doesnt work it apears like that........
The share operation Master File has failed
The operation could not be completed because an error occurred when creating frame 608 (error -1).
and i dont know what to do plese hlp me....
Re: when i try to share my project to quicktime aroun 50% appears error -1 and i can't share it what to do please helpDouble post…
-
error message don't allow me to open Lightroom 5. "An error occurred when attempting to change modules"...Please Help..!
I'm in the same situation exactly. I would like to delete, uninstall LR, and then reinstall to see if that will go anywhere. Will I loose my option for a second computer install later???
-
When I try to activate my FaceTime, I get an error msg that says, "An error occurred during activation. Try again." I have a good password (I used it to get here...); I'm on WiFi; I've toggled FT off and back on again but I cannot get past the error message and get activated. What's wrong? Thanks. Talking about my iPhone (4).
Its possible that the server can be down now. Have you ever used it before? If you want, try resseting the phone by just holding the sleep/wake key and the home button together for 10 seconds. Then wait 5 seconds when it turns off and press the sleep/wake button to turn it back on. Then try it again. Let me know what the results are.
-
When I go to use facetime, it says an error occurred during activation. What am I missing? Any suggestions on how to fix this?
You can try here:
Can't Activate FaceTime
However, I suspect an Apple server problem. Many users have been reporting problems with Messages and Facetime today. -
Error when activating datasource
Hello,
I am trying to create a new transaction data datasource assigned to a flat file source system. When i hit the check i get no errors but when i try to activate the activation fails with errors. The error Message No. RSO404 says "Error when activating Datasource". We are on BW 7.0 stack 12.
Has anyone seen this? It is hard to troubleshoot it when i get no real errors to go on. It is a very simple three field datasource with one characteristic, one key fig, and an additional currency characteristic. The key fig is in external format and references 0CURRENCY. Does anybody have any insight?
Thanks,
TMSHi TMS,
I am facing exactly the same problem here...
transactional datasource for flatfile gives me errors DO313, RSO404 and then RSDS106
We are on:
SAP_ABA 700 0011 SAPKA70011
SAP_BASIS 700 0011 SAPKB70011
PI_BASIS 2005_1_700 0011 SAPKIPYJ7B
SAP_BW 700 0012 SAPKW70012
FINBASIS 600 0008 SAPK-60008INFINBASIS
BI_CONT 703 0005 SAPKIBIIP5
SEM-BW 600 0008 SAPKGS6008
Did you manage to find a solution? -
Error When Activating DataSource in BI
Hi,
I have created a Generice Data Source in source system and replicated the same in BI. I am getting error 'Error when activating Datasource '.
Kindly give me some suggestion how to rectify it.
Regards,
Sangeetha.AHi,
First check whether u have activated the data source in the transaction RSA6. Also, check whether the data source which you activated is listed in transaction RSA5.
Regards,
Krishna. -
When I turn the iMessages on it always says the same thing. "An error occurred during activation. Try again."
Turn off iMessage and FaceTime and restart
Go to Settings > Messages and turn off iMessage.
Go to Settings > FaceTime and turn off FaceTime.
Restart your device.
Turn iMessage and FaceTime back on.
Still not activated after an hour?
It might take a few minutes to activate iMessage and FaceTime. If you've waited more than an hour, try these steps:
Make sure that your device has the latest version of iOS.
If you're using an iPhone, contact your carrier to make sure that you can receive SMS messages.
Contact Apple Support. -
Can't activate imessage on my daughters ipod touch 5th gen. Comes back with "An error occured during activation". It was working until I updated to latest IOS version 7.1.2. Managed to update Facetime ok but can't do anything with iMessage. Can anyone help?
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Hi, I am using Coherence as a cache for my weblogic application. I use a Message Driven Bean that receive a message, write something in Coherence and then write an other message in a result queue. I want all this operations to be fully transactional.
-
How to install Lion on a standalone MBP
I gave my daughter a MBP and the Hard drive died. She has no other Mac's to use. But does have access to PC's I am planning to ship her a new HD from OWC but I have no idea how she can install the operating system. Any thoughts out there? I am not
-
Photoshop CC 2014 3D menu functions greyed out
I can't seem to get 3D options enabled in CC 2014. I'm using a 2012 Macbook Pro Retina with 16gb of ram & a 1GB 650m running 10.9.3 and that well exceeds the system requirements. I have "Use graphics processor" selected in the performance tab and th
-
Cmod code to fetch line item data
Hi Experts, I have appended 2lis_11_VAHDR the field X. I want to populate this field with the data of field X from VBAP table ( SO Item table). But since the data source is a header i.e. it will have only one record aganist each SO. In table VBAP, fo
-
READ_REPORT_LINE_TOO_LONG
Hi I am getting a dump 'READ_REPORT_LINE_TOO_LONG'. the program is Z, but the dump is coming in some standard table. the thing is that I am getting this dump in quality but not in dev. please help Regards Manu