Help! Error Screen when starting up laptop!

When I opened my laptop, the screen was blank (black) and I could not hear the hard drive whirring. I took the battery out, then put it back in, and then started up the computer. I now see a white screen with this text:
Illegal instruction at _SRR0 ff85d6b4 _SSR1:00081000
Apple Powerbook6, 5 4.8 7.f1 BootROM built on 09/23/04 at 16:13:38
Copyright 1994*2004 Apple Computer, Inc.
All Rights Reserved.
Welcome to Open Frimware, the system time and date is 20:09:42 03/12/2007
The battery capacity is: 61 percent
Illegal instruction at _SRR0: ff849730 _SRR1: 0000b030
ok
0 > _

Hi,
Try starting in Safe Mode by holding down the shift key as you startup. Release it when you see the spinning progress indicator. If it starts OK restart normally.
John

Similar Messages

Blue error screen when starting up HP G60-230US

Recently, my laptop gave me an error blue screen when trying to start up. It said something along the lines of "There was an error and the computer was stopped from starting to prevent damage." After doing some research, I thought the problem was my hard drive.
I installed a replacement and installed Windows XP. It seemed to install as it should, but again as the computer was trying to load windows, I got the blue screen again. A friend thought maybe my fan wasn't working and the computer was overheating as a result. After checking, the fan seems to be working properly.
Any ideas or suggestions? Thanks.

o right. i was confusing this computer with another one i have by thinking it used xp. i can't seem to find the vista disc (if the computer actually came with one). is vista the only version of windows that would work on the computer? if i can, i'd like to install either xp or 7.

Error message when starting firefox

since I've installed the latest update (firefox 4.0.1) I get the following error message when starting firefox:
'''Type Error: Components.classes [TvPwm Component_CID] is undefined'''
I must then click on OK to get firefox to open => very annoying!
I'm using a ThinkPad laptop and the passwordvault which was perfectly available in the older version of firefox don't open in tools any longer, when forced via lenovo thinkpad tool, it daoesn't launch the asked for site either.
Thanks for helping me.
Claudia

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Error message when starting MaxDB instance

I am getting the following Error message when starting the MaxDB instance after a series of failed attempts at starting the DB Manager Backup for our PI 7.1 server.
"-24994,ERR_RTE: Runtime environment error
1,Cannot create ipc db directories for SID (OS error code 11000)"
Max DB version : 7.7.02
Does anyone have any specific pointers on where the issue could be.
Any help is greatly appreciated.
Regards,
Murali Narayanan

Hi gurus,
I'm a complete newbye searching the forums in order to decrypt what is inconsistent to me (I'm acting as a substitute for a real dba): a sapdb refusing any more connection due to an 'user space exhausted' issue.
I do not even know if/where some admin tool is/isn't installed - eventually, what to look for - onto the running demianapachetomcat framework. Actually, all I have been provided was: 1. call 'Henplus' (done); 2. connect this way (jdbc:sapdb://localhost/database&options) and 3. select, upgrade, delete what needed. Problem arises on point (2): connection resufed 'user space exhausted'.
My question is: this issue seems so similar to mine, how can one eventually check/modify this '/sapdb directory space'?
Thanks in advance for any (much appreciated) hint, and be patient about my English and newbyeness (?).
MaxM

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

N97 system error message when starting Maps

Hi all,
I do get a system error message when starting the maps app.
I know that this is not a new topic but I did not find after intensive search a solution.
- Firmware is updated
- soft reset done
- it seems that the app is not installed
- have deleted the cities folder and the qf file
Unfortunately no change - maps app does not start.
Not sure that this is important but I want to mention this for the sake of completeness:
- the maps did work once
- when I started them the next day and I was at a different location it still showed the location of the previous evening abnd did not recognize where the phone was
- after some time I could not start the the maps app.
Any help greatly appreciated!
Best

Ahhhhhh I want to scream. This phone is driving me crazy...so many problems.. latest among others is, opening maps it gives me the error like you all mentioned above.. so how and where do I go to download what you mentioned... and I did try to go into"download" and my phone just says I don't have enough memory to download anything.. HELP

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?

Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W.

Why is my G5 is stopping on the grey+apple logo screen when starting up?

My G5 is stopping on the grey+apple logo screen when starting up and fans run faster than usual after a couple minutes. I have read many of the posts related here, but it seems none are exactly what I am experiencing. Here is what I have done:
+Disconnected all peripheral devices (except for keyboard and mouse).
+Unplugged power cord and plugged back in.
+Unplugged ethernet cable.
+Removed added memory.
+Reset the SMU button on the logic board.
+Reset the PRAM by pressing Command-Option-P-R keys. It makes its second start up chime but I still get the grey screen.
+After opening the disc door with a paper clip, started up while pressing "C" with Hardware Test CD which found no problems.
+However, also started up with Systemworks disc and ran Disc Doctor, but I get an "unexpected problem, Error found: disk error" while "Checking Directories: Catalog Structure". When trying to run Speed Disc, my hard drive doesn't even show up in the window to select it. Nor does it show up in Disk Viewer.
I have not tried to start up from the original Mac Startup or installation disc that came with the computer. I am not at my G5 right now (having to use the internet at work). If I start up with that disc, will I loose any work (if I haven't already) that I haven't backed up?
Also, the G5 manual suggests replacing the lithium battery inside the tower if I am having problems starting up. I have not read to do this anywhere else except in the manual. It mentions having problems with the date and time which I haven't so I doubt it's the battery.
Any suggestions?
Thanks,
Tony
G5 Power Mac Mac OS X (10.0.x)

First and foremost you should never use Norton Utilities Disk Doctor or Speed Disk. They will corrupt your hard drive. NUM is not compatible with modern Macs and is no longer supported by Symantec. I highly recommend you uninstall it. You will find instructions here.
You should do the following:
Boot from your Tiger DVD. After the installer loads select your language and click on the Continue button, then select Disk Utility from the Utilities menu . After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If this does not fix the problem, then it's possible your system files have been damaged in which case you may need to reinstall OS X. You can do this by an Archive and Install which does not require erasing the hard drive. However, the hard drive must be verified as OK per the preceeding intructions.

I can't get past white screen when starting up, any ideas?

I Can't get past white screen when starting up, any ideas

http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup
===============
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums

Message "Error 4 when starting extraction program" with any extraction.

Hi to everyone.
We have a problem in a pre-existing BW system of development.
When we start any extraction (for example 0MATERIAL_ATTR), the monitor give us the following error:
ERROR 4 WHEN STARTING THE EXTRACTION PROGRAM (R3-19).
I've checked the link between the two system, and it may be right. When I check the soursystem from BW I havn't any error.
Then, when I test the extractor on R/3 with RSA3, any error as result and the tester extracts a lot of records.
Anyone have any idea ?
Max

Thanks for your fast help.
Claudio, the messages are only two ...
- Error 4 when starting the extraction program
R3 19
- Errors in source system RSM 340
No dump on the R/3 and BW.
Roberto, I've followed the note 325470 too, but the problem remain. Only one ... the note 147104 say ...
"This server must be capable of starting a background process for data extraction".
Is there a way to check this point ?
Thanks in advance guys.
Max

An error occured when starting interaction layer application

Hi all,
when starting the IC WebClient and choosing a profile, i get the following error:
An error occured when starting interaction layer application
An exception has occurredException Class CX_CRM_GENIL_GENERAL_ERROR
Text: Component set CRMIC_DEFAULT contains multiple object definitions
Program: CL_CRM_GENIL_INTERNAL_MODEL===CP
Include: CL_CRM_GENIL_INTERNAL_MODEL===CM005
Source Text Row: 39
An error occurred during the initialization of the view manager
An exception has occurredException Class CX_BSP_EINTERNAL
Text: BSP Exception: Internal Error in Business Server Page Runtime.
Program: CL_BSP_WD_APPLICATION=========CP
Include: CL_BSP_WD_APPLICATION=========CM004
Source Text Row: 32
can someone help me solve this plz?
thx alot!
greets,
Martin

Hello Martin.
What a weird error you have.
Can you tell me if that this profile was developments, our customer customization?
If you select a 100% standard profile (like DEFAULT one), you still have the error?
Kind regards,
Bruno

Please help error -9808 when downloading apps in itunes store anyone can help me out

please help error -9808 when downloading apps in itunes store anyone can help me out

Click here > iTunes: Advanced iTunes Store troubleshooting
Then "expand" Specific Conditions and Alert Messages
Then click 9808

I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (what does this mean?)

I recently updated my iTunes to the most recent version and I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (Does anyone know what this means and if it is going to cause me issues?)

http://support.apple.com/kb/TS2690?viewlocale=en_US&locale=en_US

Error message when starting Firefox 8 that says: TypeError: Components.classes[TvtPwmComponent_CID] is undefined

error message when starting Firefox 8 that says:
TypeError: Components.classes[TvtPwmComponent_CID] is undefined
I am using Window 7 64 bit

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Getting error message when starting Photoshop CS3

I am getting the following error message when starting CS3:
"This application has failed to start because CML4.dll was not found."
The window title is, "Photoshop.exe - Unable to Locate Component"
Of course, the only button to push is the "OK" button (which should probably read - Something's f-d up. Press here to continue.) After pressing the OK button, CS3 starts and works without issue - so far. I guess I haven't actually used the part of the program that uses CML4.dll or just don't see any difference with or without it.
How can I resolve this issue - without reinstalling PSCS3? and why does it happen in the first place?

Nikon Scanning Software has CML4.dll as part of its package. I assume that the Nikon software did not install/uninstall properly and is causing the error. I have not gone back to do Nikon scans within Photoshop so I do not know if it affects performance. McAfee does not flag it as a virus, and other websites I referred to indicated no viral activity associated with the file.

Help! Error Screen when starting up laptop!

Similar Messages

Maybe you are looking for