[HELP] : error when restore data from server A to server B
Hello,i have troubles when restore FULL BACKUP from server A to Server B Please help me
when i Backup Full from server A ,i copy that Backup files to Server B (aa new server),i restore spfile và control file from BK files,then i mount (alter database mount ) to restore database , it show error message ORA-01103: database name 'ORCL' in control file is not 'DUMMY' , i tried to shutdown immediate and then startup mount again , but it show other error message RMAN-04014: startup failed: ORA-00845: MEMORY_TARGET not supported on this system
Please help me
Thank a lot
Filesystem 1K-blocks Used Available Use% Mounted on
shmfs 2097152 157532 1939620 8% /dev/shm
please give me answer a question : now , i have pfile initDUMMY.ora
DUMMY.__db_cache_size=13287555072
DUMMY.__java_pool_size=134217728
DUMMY.__large_pool_size=67108864
DUMMY.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
DUMMY.__pga_aggregate_target=13757317120
DUMMY.__sga_target=20602421248
DUMMY.__shared_io_pool_size=0
DUMMY.__shared_pool_size=6845104128
DUMMY.__streams_pool_size=67108864
*._controlfile_enqueue_timeout=1800
*._kill_controlfile_enqueue_blocker=FALSE
*._kill_enqueue_blocker=1
*.audit_file_dest='/u01/app/oracle/admin/DUMMY/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oracle/product/11.2.0/db_1/dbs/control01.ctl'
*.db_block_checking='TRUE'
*.db_block_checksum='TRUE'
*.db_block_size=8192
*.db_domain=''
*.db_flashback_retention_target=10080
*.db_lost_write_protect='NONE'
*.db_name='DUMMY'
*.db_recovery_file_dest='/u01/app/oracle/fast_recovery_area'
*.db_recovery_file_dest_size=1099511627776
*.db_ultra_safe='DATA_AND_INDEX'
*.diagnostic_dest='/u01/app/oracle'
*.disk_asynch_io=TRUE
*.dispatchers='(PROTOCOL=TCP) (SERVICE=DUMMYXDB)'
*.log_archive_dest_2='SERVICE=svrhst LGWR SYNC AFFIRM DELAY=0 OPTIONAL REOPEN=5 MAX_FAILURE=3'
*.log_archive_dest_3='SERVICE=exthst LGWR SYNC AFFIRM DELAY=0 OPTIONAL REOPEN=5 MAX_FAILURE=3'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_dest_state_3='DEFER'
*.log_archive_format='%t_%s_%r.dbf'
*.memory_target=34359738368
*.open_cursors=5000
*.os_roles=FALSE
*.processes=1024
*.recyclebin='ON'
*.remote_login_passwordfile='EXCLUSIVE'
*.session_cached_cursors=256
*.sessions=2048
*.sql92_security=TRUE
*.undo_retention=2700
*.undo_tablespace='UNDOTBS1'
but i don't know why ? before i shutdown immediate (database states is nomount) , i show parameter MEMORY_TARGET , the value is 0 ?
Thank
Similar Messages
-
Error when reading data from socket
Hi,
I am getting the error 'NiRawReadError: An error occured when reading data from socket.' when using the ABAP API 'mo_core_service->invoke_matching'.
And I get this error only when I pass ABAP_TRUE to the paramter 'iv_wait_for_invocation' .
Can anybody help me in correcting this?Hi Narasa,
The following error is already in discussion in the below forum.Plz consult the forum link you will find the error solution.
Problem in ABAP API - NiRawReadError: error when reading data from socket
Rgds
Ankit -
JavaConsole Error: Problem reading data from server
HI All
We are getting this error on java console on a page:
Error: Problem reading data from Server - Java.Security.AccessControlException:access denied (java.util.PropertyPermission http.strictpostredirect Read)
In this page we are not firing a SQL Query of huge data.
Any suggestions on this why it is happening?
Thanks
ManishaManisha,
I think JVM(Java Virtual Machine) is trying to access something at network level and it cant able to find it.Or any new patches of java is installed.
Or may be due to IIS or Applet,Don't know exactly.
You can find some answers in below links:
http://java.sun.com/j2se/1.4.2/docs/api/java/security/AccessControlException.html
http://www.webdeveloper.com/forum/archive/index.php/t-46358.html
-Suresh -
Error when downloading application from Server
Hi,
I have installed MI Client 7.0 SPS 11 Patch 0 on Symbol Device ;OS Windows Mobile5.0
i have successfully completed <b>first</b> synchronization .
After that i assigned Mobile Component to the device and tried synchronizing.
"Error when downloading application from http://<servername>:50000/meContainerSync/servlet/com.sap.ip.mi.http.MobileComponentServlet?Application=xyz&Type=APPLICATION&Runtime=JSP"
Pl. suggest
Note: In NWA under 'Device Maintenance' -> Mobile component
The state of the aplication is <b>"Deployment Activated"</b>
rgds,
Kiran Joshua
Message was edited by:
Kiran JoshuaHi ALL,
I resolved it on my own guys !!!
Actually while downloading server url consists of hostname bcoz the hostfile entry in windows/system32/drivers/etc/hosts was only hostname.
i entered FQDN name in the hostfile... It WORKED
Being Saturday and Sunday...i cud not get any help from forums...i was really worried and Guys we need to think on this :-?
rgds,
Kiran Joshua -
Error when reading data from XML using JAXB?
Hi all,
I get the error message when reading data from XML using JAXB.
[org.xml.sax.SAXParseException: The entity name must immediately follow the '&' in the entity reference.]
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException
(AbstractUnmarshallerImpl.java:315)
at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.createUnmarshalException(UnmarshallerImpl.java:481)
at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(UnmarshallerImpl.java:199)
at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:168)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:137)
at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:142)
I don't find the reason, please help!
Thanks in advance!The problem is sovled.
-
Error when uplaoding data from R/3
hi Gurus,
I have got a problem when loading data from r/3 to bw .
i have loaded a init req and i have got more than 1 lac records.
i found out that there are 2000 records with the same error in PSA.
i have used a normal staging scenario ..psa and then to data target.
I know we can do it manually..but anyother way not retrieveing from r/3 again.
how to solve this problem.
and plz let me if i can have only correct records into data target preventing the incorrect ones by any specific setting..
will award points for good answers
thanks ,
charan.Hi krishna,
there was a typo mistake with rohini..Use the transaction RSKC and enter those unpermitted characters..and do the load this time you will not get that error...
Try to assign points upto your satisfaction level.. -
Error when passing data from app server...
Hello Experts,
I am encountering an error when trying to pass data from application server
to my internal table. Below is the error:
"You cannot convert the character set"
Hope you can help me guys.Thank you and take care!Hi ,
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures. The code is base on uploading a simple txt file.
REPORT zuploadtab .
PARAMETERS: p_infile LIKE rlgrap-filename
OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
name1 like pa0002-VORNA,
name2 like pa0002-name2,
age type i,
END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
CLEAR: wa_string, wa_uploadtxt.
READ DATASET ld_file INTO wa_string.
IF sy-subrc NE 0.
EXIT.
ELSE.
SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
wa_uploadtxt-name2
wa_uploadtxt-age.
MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
APPEND wa_upload TO it_record.
ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
write:/ sy-vline,
(10) wa_record-name1, sy-vline,
(10) wa_record-name2, sy-vline,
(10) wa_record-age, sy-vline.
endloop.
Reward points if it is usefull ..
Girish -
EVDRE encountered an error when retrieving data from web server
Hi
When I am trying to open Data Input=>Build a schedule using a dynamic template in BPC version for SAP netweaver, I am getting the below error "EVDRE encountered an error retrieving data from the Web Server".
I am not able to open any template, every time I am getting the same message. I have tried again after reprocessing all the dimension.
Even I have tried in appset APSHELL also, there also I am getting the same error
Request you to help me to resolve the above error which will allow me to proceed further.
Thanks in Advance.
VenkatHi,
Beside Nilanjan's solution, this error could also occur when the expansion is running more rows than the Excel limit allows (65'000 rows and 256 cols for Excel 2003)...
Even when you're using suppress field to reduce the number of rows, the first sequence is to retrieve the complete dataset before performing any suppression. And this could of course exceed the limit sometimes.
Hope this helps.
Kind Regards,
Patrick -
Runtime error when Transfering data from data object to a file
Hi everybody,
I'm having a problem when I transfer data from data object to file. The codes like following :
data : full_path(128).
OPEN DATASET full_path FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
and transfer data from flat structure to this file full_path
move: tab to c_output-tab_5,
tab to c_output-tab_4,
tab to c_output-tab_3.
transfer c_output to full_path. // Error Line
The detail error like the following:
For the statement
"TRANSFER f TO ..."
only character-type data objects are supported at the argument position
"f".
In this case. the operand "f" has the non-character-type "u". The
current program is a Unicode program. In the Unicode context, the type
'X' or structures containing not only character-type components are
regarded as non-character-type.
transfer c_output to full_path. " Line error
Please help me to fix this issue !
Thank you in advance !
Edited by: Hai Nguyen on Mar 4, 2009 10:55 AMHi Mickey,
Thanks for your answer,
I found out that the structure c_output have the field with data type X. I know that the cause of the issue.
begin of c_output,
vbeln(10),
tab_5 like tab,
posnr(6),
tab_4 like tab,
topmat(18),
tab_3 like tab,
end of c_output.
data : tab type X value 9.
Could you tell me how to fix it ? What I have to do in this situation ?
Thank you very much ! -
Error when uploading data from Flat file
I am uplading data from Flat file.
When I am uploading it gives an error
An error occurred in record 1 during execution of conversion exit CONVERSION_EXIT_CUNIT_INPUT for field UNIT.
Can any one help.
Thanx in Advance.
Regards,
Pradeep.Hi Pradeep,
Refer this link:
CONVERSION_EXIT_CUNIT_INPUT error in flat file load
Re: Error in Flat files upload
Also try this - In the transfer structure check the checkbox fo UNIT and retry the load. Hopefully it should be fine.
Bye
Dinesh -
Error when loading data from DSO to Cube
Hi,
After upgrading to 2004s we get the following error message when trying to load data from a DSO to a Cube:
Unexpected error: RSDRC_CONVERT_RANGES_TO_SELDR
Has anyone experienced a similar problem or have some guidelines on how to resolve it?
Kind regards,
FredrikHej Martin,
Tack!
Problem solved
//Fredrik -
Error when extracting data from Data Source
Hi All,
I have a Generic datasource in BW which is based on a Function Module.When I am extracting the data from this source in RSA3 it is ending up in Run time error.
the error message is
The current ABAP program "SAPLYBWPU" had to be terminated because one of the
statements could not be executed.
and the error analysis is
You wanted to add an entry to table "\FUNCTION-POOL=YBWPU\DATA=GT_HIERTAB2", which you declared with a UNIQUE KEY. However, there was already an entry with the same key.
This may have been in an INSERT or MOVE statement, or within a
SELECT ... INTO statement.
In particular, you cannot insert more than one initial line into a
table with a unique key using the INSERT INITIAL LINE... statement.
Can anybody explain me how can I resolve this
Thanks
SreejaHello
You can refer following link.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33&overridelayout=true -
Error when sending data from Cube to ODS
HI,
I am extracting data from 2lis_02_itm & I stored the data in 0pur_o01(ODS) tha data is fine in ODS but when I am trying to send data from ODS to Cube 0pur_c07 it is giving the above error
InfoSource 80PUR_O01 is not defined in the source system
Errors in source system
InfoSource 80PUR_O01 is not defined in the source system.
Message no. R3005
Diagnosis
The InfoSource 80PUR_O01 specified in the data request, is not defined in the source system.
System response
The data transfer is terminated.
Procedure
In the Administrator Workbench of the Business Information Warehouse, update the metadata for this source system, and delete the InfoPackages belonging to InfoSources that no longer existing
Thanks
PriyaHi A Priya
First check if infosource 80PUR_O01 is present in datasource list of your BW system. Check this in RSA1-> Infosources-> here do Settings -> display generated objects and then do search on 80PUR_O01.
if it not present there go to ODS 0PUR_O01-> right click
-> generate export datasource.
If it is present there then replicate the datasource by right click on transfer rules and then go to SE38-> Enter program name as RS_TRANSTRU_ACTIVATE_ALL -> Enter Infosource name as 80PUR_O01 and BW System as source system-> Execute. This will activate the transfer rules.
Then try reloading from ODS to cube
Regards
Pradip -
RMAN error when restoring controlfile from tape
Hi,
We have a Production database with instance name PROD.
We use Symantec Netbackup software to backup this database to tape library.
We want to test some recovery scenarios on a test server. So we want to restore the production backups from Tape to this test server.
We did the following:
Cloned the ORACLE Home to the Test Server.
Changed the db_name parameter to PROD and also set ORACLE_SID to PROD.
then we connected to RMAN and ran the following command to restore the control files:
RMAN> run {
set dbid 4155532403
set controlfile autobackup format for device type 'sbt_type' to '%F';
set until time "to_date('16/12/2012:10:13:37','dd/mm/yyyy:hh24:mi:ss')";
allocate channel t1 device type 'sbt_tape';
SEND 'NB_ORA_SERV=riysvbkp-001,NB_ORA_CLIENT=lh-erp';
restore controlfile to '/testerp/dbexec/tmp/cf1.ctl' from autobackup;
executing command: SET DBID
database name is "PROD" and DBID is 4155532403
executing command: SET CONTROLFILE AUTOBACKUP FORMAT
executing command: SET until clause
allocated channel: t1
channel t1: SID=171 device type=SBT_TAPE
channel t1: Veritas NetBackup for Oracle - Release 7.1 (2011082510)
sent command to channel: t1
Starting restore at 17-DEC-12
channel t1: looking for AUTOBACKUP on day: 20121216
channel t1: AUTOBACKUP found: c-4155532403-20121216-01
channel t1: restoring control file from AUTOBACKUP c-4155532403-20121216-01
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/17/2012 08:34:41
ORA-19870: error while restoring backup piece c-4155532403-20121216-01
ORA-19507: failed to retrieve sequential file, handle="c-4155532403-20121216-01", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
Failed to process backup file <c-4155532403-20121216-01>
Here you can see that AUTOBACKUP is found but RMAN is unable to process the backup piece.
I am not able to see any errors in the log files. Please advise.
Thanks,
Muneer.Thanks.
The earlier error is gone and now I am getting the following error:
channel t1: looking for AUTOBACKUP on day: 20121216
channel t1: AUTOBACKUP found: c-4155532403-20121216-01
channel t1: restoring control file from AUTOBACKUP c-4155532403-20121216-01
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/17/2012 14:34:25
ORA-19870: error while restoring backup piece c-4155532403-20121216-01
ORA-19507: failed to retrieve sequential file, handle="c-4155532403-20121216-01", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
Backup file <c-4155532403-20121216-01> not found in NetBackup catalog -
Error when extracting data from R/3 into BW
Hi,
There is an infoobject Payscale Level(Datsource 0paysclaelv_attr) in BW module HR that is extracting data from R/3. While extracting data, the following error occurs "Assignment to feature PFREQ did not take place". I debugged the standard function module HR_BW_EXTRACT_IO_PAYSCALELV and I believe there is definitely an error in the data. But Im not able to find out that record. Has anyone come across this error before? Please let me know if theres any solution to this error. The help for this error provides the following details. But I havent understood it. Any help would be greatly appreciated.
You can assign a specific operation (assignment) to each decision option
within a feature. You can also define decision option ** whose
assignment is effected for all unlisted decision options (this is known
as a default value).
Example:
o D PERSK
o K1 &ABRKS=D1, <- D1 for employee subgroup K1
o K2 &ABRKS=D1, <- D1 for employee subgroup K2
o K3 &ABRKS=D2, <- D2 for employee subgroup K3
o ** &ABRKS=D0, <- D0 for all other employee subgroups
If you now create employee subgroup K4 and the default entry ** is
missing, the system is unable to find a decision option for payroll area
ABKRS.
Procedure
Define a decision option for K4 or for default value **.Hi ,
The error is due to the existing customizing of feature PFREQ for MOLGA = 05, there the value to be returned depends on the WERKS, but apparently it was forgotten to add a new line for the "Otherwise" case.
Like it was already done for the case of MOLGA = 03, for example. Please add then a line for MOLGA = 05 and "Otherwise" and the issue should be solved.
If this doesnot solves your issue , then kindly check these OSS notes :
1033423 -> 0PAYSCALELV_ATTR: Short dump feature_error
842212 -> 0PAYSCALELV_ATTR: DataSources deliver wrong results
92055 -> RP_FROM_PERIOD_TO_PERIOD: FEATURE_ERROR dump
Regards,
Lokesh
Maybe you are looking for
-
IPod 80gb error (-48) problem.
Hi, my sons iPod has developed a problem. It is being recognised by the computer as a drive, but not in ITunes, as the error -48 message keeps stopping the restore which we are trying to do. We have downoaded the latest software, have the latest wind
-
How to unlock my sapuser user account in sap r/3 system..
Hello, I am a newbie to sap bw.I am practising sap bw with sap r/3.My user login account got locked becoz of password error.Now i know the correct password for the user sapuser.please advice me how can i relogin to my my sap bw. "It s
-
Blu Ray onto DVD Using Toast 10
I have tried several output resolutions and codecs that I send to Toast 10 from I Movie, i.e. MPEG-4. Apple Intermediate, etc, all at 1920 resolution. Toast will burn the blu ray onto the dvd, but when I play it, the video has lines on it during any
-
Solaris 10 shared memory config/ora 11g
The ora 11 install guide for spark solaris 10 is very confusing wrt shared memory and my system does not seem to using memory correctly, lots of swapping on an 8GB real memory system. The doc says to set /etc/system to: shmsys:shminfo_shmmax project.
-
CS2 and MBP (Measurements in InDesign)
When in InDesign, the measurements in the control panel show up with 15 decimal points (8.50505050505050 instead of 8.5). Illustrator and Photoshop work fine and show only 4 numbers after the decimnal point. I am running on the latest OS updates and