Help error while booting sunfire v440 (error)

Hi solaris admins.
i am getting the following error while trying to install the solaris 10 OS on a sunfire v440 server.Please can someone help me out here.i think the problem is with the Hard Drives or something.
=================================================
Sun Fire V440, No Keyboard
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.17.2, 8192 MB memory installed, Serial #63181061.
Ethernet address 0:3:ba:c4:11:5, Host ID: 83c41105.
Rebooting with command: boot cdrom
Boot device: /pci@1e,600000/ide@d/cdrom@0,0:f File and args:
SunOS Release 5.10 Version Generic_118833-33 64-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
=======================================================
Hardware watchdog enabled
Configuring devices.
WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
Corrupt label; wrong magic number
WARNING: /pci@1f,700000/scsi@2/sd@2,0 (sd4):
Corrupt label; wrong magic number
========================================================
internal error: Bad file number
svc:/system/filesystem/local:default: WARNING: /usr/sbin/zfs mount -a failed: ex
it status 134
====================================================
Plese and advice and ideas are highly appreciated.
We Brain server.
Regards
Noa Junior Sys Admin

No clue why it's doing that when you're booting off
the CD though... I didn't think it checked. Hmmm.
boot cdrom will try and start the installer - not sure what happens if no valid disk label.
I do recall going through this (or something similar)
when the HD in my Blade 150 failed and I swapped in a
new one. I just formatted the drive, then I was
fine. Not sure HOW I formatted it though. Never
bothered to write it down, it seemed obvious at the
time :-(Could first try boot cdrom -s to just get a single user shell, and then run format just to create the disk labels.
If manually running format successfully labels the disks, then try running the installer (which should give the option of how to partition the disks).

Similar Messages

R710 error while booting - pcie training error: integrated raid

http://www.ebay.com/itm/Dell-K869T-DW592-PowerEdge-R610-R710-iDRAC6-Enterprise-Express-Remote-Access...
Throw one of those in there. If you need it 1 time, it paid for itself.

I have an r710 and just now booted it for the first time.
First thing it does is check the ram then it looks for the iDRAC card (which I don't have) and then after that is when it displays the error:
pcie training error integrated raid
System halted.
The pcie card I have in the raid slot is the PERC H710 raid card.
The green LED on the card blinks/flickers so I am hoping that's normal for it to do that.
The BIOS version on the R710 is 6.0.7.
This topic first appeared in the Spiceworks Community

Getting BSOD error while booting

Hi,
I am getting BSOD error while booting using bootable pendrive.
Could you guys please provide the possible solution
Regards,
Chandan

Hello,
To troubleshoot the issue, you need review the dump file. We may find out the which file or driver is triggering a BSOD. And in most cases, BSOD is triggered by driver issue.
Are you doing OS deployment via bootable pendeivce? How do you created the boot image?
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

BSOD Error while booting Thinkpad L440

Link to image
Hi All,
I'm getting a BSOD Error while booting my Lenovo Thinkpad L440 system.
Please help.
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

Hello,
To troubleshoot the issue, you need review the dump file. We may find out the which file or driver is triggering a BSOD. And in most cases, BSOD is triggered by driver issue.
Are you doing OS deployment via bootable pendeivce? How do you created the boot image?
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

USB error while booting

I'm getting this error while booting:
Waiting for UDev uevents to be processed
[ 3.631701] usb 1-1.1: unable to read config index 0 descriptor/all
[ 3.631811] usb 1-1.1: can't read configurations, error -32
[ 3.643141] hub 1-1:1.0: unable to enumerate USB device on port 1
I saw other thread in this forum but i can't find any solutions because I have no USB plugged in. Any suggestions?
Last edited by quiro91 (2012-06-26 09:17:08)

rc.conf -> http://pastebin.com/eJTXVt1L
mkinitcpio.conf -> http://pastebin.com/u90UQ8kt
udev is actually after base. I'm going to try linux-lts now, I'll let you know, and obviously thanks for your help
EDIT: using lts kernel, I rebooted 5 times and everything works fine, no error message at all
DSpider wrote:
Post these files (preferably using pastebin.com):
/etc/rc.conf
/etc/mkinitcpio.conf
"udev" should be after "base". For example:
HOOKS="base udev autodetect pata scsi sata usbinput filesystems fsck"
Then regenerate your initramfs:
# mkinitcpio -p [your linux preset, since you're using linux-ck... I don't know]
For the kernel from the [core] repo, it's:
# mkinitcpio -p linux
Speaking of kernels, does it happen with linux-lts too?
Last edited by quiro91 (2012-06-26 15:52:15)

Installing Arch Linux on USB key: error while booting

Hello,
first of all, I must say I've followed the steps from this article on arch wiki to install archlinux on my USB key: https://wiki.archlinux.org/index.php/In … _a_USB_key
So what I did is to use one of my 2 usb keys to INSTALL linux, and the second one to RUN linux. I used dd to write on the 1st usb, eveything worked fine when booting, then I do install arch on the my second usb following the stept from the link above, everything works until I get this error while booting (at the middle):
Waiting 10 seconds for device /dev/sdc/
Root device '/dev/sdc' doesn't exist. Attempting to create it.
ERROR: Unable to determine major/minor number of root device '/dev/disk/by-uuid/lotsofnumbers'
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
/bin/sh: Can't contact tty; job control turned off
[ramfs /]#
To summarize I'll show you my conf files that could help you to resolve my problem:
/etc/fstab.conf
/dev/sdc1 /boot ext2 defaults 0 1
/dev/sdc2 / ext3 defaults 0 1
/dev/sdc3 /home ext3 defaults 0 1
So here I've sdc1 boot 32MB partition; sdc2 root 3GB partition; sdc3 home 978MB partition for a total of 4GB USB key~
I didn't make a swap partition as in the tutorial they are writing it's unnecessary for some kind of reasons.
/etc/mkinitcpio.conf
HOOKS="base udev usb autodetect pata scsi sata filesystems"
I've added to here, "usb" to the hooks
installed GRUB on my sdc, here is the menu.ist:
# (0) Arch Linux
title Arch Linux (USB)
root (hd0,0)
kernel /vmlinuz26 root=/dev/sdc ro vga=773
initrd /kernel26.img
So, I boot GRUB without problems, start Arch Linux, but then I got this error above.
I've searched alot on some forums and read many stuffs, but sitll can't fix it and it seems complicated.
I've tried to boot with UUID, also, but didn't make difference. I tried to remove some parameter from the hooks, but unfortunately this wasn't working still. I've read somewhere to use chroot, but I didn't catch on how to do that and what was the use of chroot, I'm still noob user of arch linux and currently learning. Maybe it's the problem, as some forum were talking about creating a new image, but I still don't know how to make it. By the way, I'm not sure this could have fixed my current problem. I've also read somewhere it could be due to my lack of space, but I wrote you how I did partition my USB key, let me know if you have any suggestion please.

1. What I did is re-installing entirely from my installation disk or USB to test out different setting in my config files, because I don't know how to edit my .conf as I can't really finish to boot to the end and get in terminal mode? If there is a quicker way to edit files from any terminal to go into my current USB sdc to modify directly my file from there, I'd enjoy probably. So rebuilding the initpio, no, I just re-installed to test out different configs.
2. Yes, same error.
3. Tested out by-id/by-path and uuid = no difference
4. Didn't know about larch, it seems to be a nice tool, I'll check it out

Error while booting maverick

error while booting maverick

The most likely causes of this error are:
1) Failing to execute tmloadcf after updating the UBBCONFIG file.
2) Failing to set TUXDIR correctly in the UBBCONFIG file.
3) Failing to set TUXCONFIG, PATH, or
LD_LIBRARY_PATH(Unix)/SHLIB_PATH(HP)/LIBPATH(AIX) correctly in your
enviroment.when executing tmboot or tlisten.
You should verify that your environment is set correctly and you should
execute tmunloadcf to see the contents of the configuration file that has
been loaded.
Ed
<Kaustubh Deoghare> wrote in message news:[email protected]..
Hello,
I am getting following error while booting tuxedo
exec TMS_ORACLE8I -A :
TMS_ORACLE8I: symbol lookup error: TMS_ORACLE8I: undefined symbol:
kgsmp789_compat_
CMDTUX_CAT:819: INFO: Process id=2568 Assume started (pipe).
Though I have installed Oracle9i, in ubbconfig it is still taking
TMS_ORACLE8I and hence trying to access Oracle8i library files.
Pl suggest in this regard
Thanx in advance

Pcipsy error while booting

I have installed a PCI audio card and its driver. While booting
I am getting following error
pcipsy: WARNING: pcipsy0: ino 23 is invalid
pcipsy: WARNING: pcipsy0: ino 10 is invalid
Can any one tell me what is causing this pci error?
Thanks

The most likely causes of this error are:
1) Failing to execute tmloadcf after updating the UBBCONFIG file.
2) Failing to set TUXDIR correctly in the UBBCONFIG file.
3) Failing to set TUXCONFIG, PATH, or
LD_LIBRARY_PATH(Unix)/SHLIB_PATH(HP)/LIBPATH(AIX) correctly in your
enviroment.when executing tmboot or tlisten.
You should verify that your environment is set correctly and you should
execute tmunloadcf to see the contents of the configuration file that has
been loaded.
Ed
<Kaustubh Deoghare> wrote in message news:[email protected]..
Hello,
I am getting following error while booting tuxedo
exec TMS_ORACLE8I -A :
TMS_ORACLE8I: symbol lookup error: TMS_ORACLE8I: undefined symbol:
kgsmp789_compat_
CMDTUX_CAT:819: INFO: Process id=2568 Assume started (pipe).
Though I have installed Oracle9i, in ubbconfig it is still taking
TMS_ORACLE8I and hence trying to access Oracle8i library files.
Pl suggest in this regard
Thanx in advance

Error while booting or loading application server by runing psadmin.exe

HOw to upgrade the database to 8.49 from 8.48
also to update the patch to 8.49 need to be a customer id or licensed something like that...
i am using a trial version .....please suggest
==============ERROR!================
Boot attempt encountered errors!. Check the TUXEDO log for details.
==============ERROR!================
*Do you wish to see the error messages in the APPSRV.LOG file? (y/n) [n] :Y*
PSADMIN.1160 (0) [06/06/09 13:12:01](0) Begin boot attempt on domain orcl
PSWATCHSRV.3440 (0) [06/06/09 13:12:12] Checking process status every 120 second
s
PSWATCHSRV.3440 (0) [06/06/09 13:12:12] Server started
PSAPPSRV.3728 (0) [06/06/09 13:12:15](0) PeopleTools Release 8.49 (WinX86) start
ing
PSAPPSRV.3728 (0) [06/06/09 13:12:15](0) Cache Directory being used: C:\PTv849\a
ppserv\orcl\CACHE\PSAPPSRV_2\
PSAPPSRV.3728 (0) [06/06/09 13:12:15](1) GenMessageBox(200, 0, M): PS General SQ
L Routines: Missing or invalid version of SQL library PSORA (200,0)
PSAPPSRV.3728 (0) [06/06/09 13:12:15](1) GenMessageBox(0, 0, M): Database Signon
: Could not sign on to database ORCL with user PS.
PSAPPSRV.3728 (0) [06/06/09 13:12:15](0) Server failed to start
PSWATCHSRV.3440 (0) [06/06/09 13:12:16] Shutting down
PSADMIN.1160 (0) [06/06/09 13:12:22](0) End boot attempt on domain orcl
*Do you wish to see the error messages in the TUXLOG.060609 file? (y/n) [n] :y*
131215.TALENT!PSAPPSRV.3728.2056.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
131215.TALENT!tmboot.3328.3968.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error en
countered; initiating user error handler
131219.TALENT!BBL.2872.944.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
131222.TALENT!PSADMIN.1160: End boot attempt on domain orcl

hi Nicolas,
thnks for ur reply.....
this is the link please check uptil yet what i have done now
peopleSoft HRMS and campus 9.0 db creation please help
can u please give the link to get the Peopletools installation Guide.
recentely i am using pdf named hwtools849_itora.pdf FOR Database creation
is it possible to update database from 8.48 to 8.49 by using trail version....so need to of any licensed
AS on this link "http://gasparotto.blogspot.com/2008/06/peoplesoft-server-on-windows-xp.html" there it is shown to use update path from ftp connection to get download..where i am not able to connect
6. PeopleTools 8.49 patch 11 - only if you are licenced - *(downloaded from ftp://ftp.peoplesoft.com/outgoing/ptools/84911)* From the extracted package, under disk1, run setup.exe, and follow the exact process as the previous one.
add to path i ave given :- C:\oracle\product\10.2.0\db_1\BIN
even thought i have set environment path
like
ORACLE_BASE = C:\oracle\product\10.2.0,
ORACLE_HOME = C:\oracle\product\10.2.0\db_1 ,
ORACLE_SID = orcl,
BEA_HOME = C:\bea ,
PS_HOME = C:\PTv849; (DIR WHERE INSTALLED PEOPLETOOL 8.49 + PEOPLESOFT HRMS & CAMPUS SOLUTION 9.0)
as u said
On Windows, into you appserver config file, you should give the path directory "Add to Path" to your ORACLE_HOME\bin folder, did you ?
please can u tell the appserver file with full path + name...by which ii can find....
thnks..
Edited by: user11084225 on Jun 6, 2009 2:14 AM
Edited by: user11084225 on Jun 6, 2009 2:15 AM

Error while powering on: Internal Error

I have a fresh install of windows 8.1 with all the latest updates installed. Whenever I try to power on a virtual machine, I get the error "Error while powering on: Internal Error". I've searched the forums and tried all the suggested fixes including ensuring that the auth service is running, renaming the vmware.exe file and running vmware.exe as an administrator. Looking through the logs, it seems like there are major permissions issues, but I have no idea how to resolve them. Can anyone help? I've attached the relevant log files.

Hi hyjkim, and welcome to the VMware Communities!
What is your host system? You may need to check for BIOS/firmware updates for your host... it is reporting nonsense information to us, which is the cause of the failure.
If you are sure that your host machine has the latest BIOS/firmware updates applied, let me know and I'll provide a workaround suitable for your system.
Thanks,
Darius

Error while releasing PO : System error: block object EKKO, Key PO Number.

Dear All,
I am getting error while releasing PO : System error: block object EKKO, Key PO Number.
Please help to resolve.

Hi Friend,
How the issue is resolved, because i am facing the same issue, while positing Service entry sheet.
If you can give us solution, it will be more useful and more appreciated
REgards
RS

Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

Hi experts,
I have a big issue in production server,
the Queues are stuking in smq2 " command to tRFC/qRFC: execute LUW again"
if i am reprocess or press F6 it is going manually.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://xidist:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://xidist:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://xidist:8000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed May 14 15:50:24 2014 </td></tr> <tr><td>Module:</td><td>icxxconn.c</td></tr> <tr><td>Line:</td><td>2341</td></tr> <tr><td>Server:</td><td>xidist_GXI_00</td></tr> <tr><td>Error Tag:</td><td>{004654a1}</td></tr> <tr><td>Detail:</td><td>Connection request from (110/28816/0) to host: xidist, service: 50000 failed (NIESERV_USED) EX-T110, U28816, 001 PIAFUSER, 10.1.57.50, 15:50:24, M0, W1, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Regards,
Kiran polani

Dear Sriram Ramani,
in ths case some scenarios are working good. proxy to soap, idoc to soap and jdbc to proxy, proxy to jdbc all are working with out error.
but my problem is in Soap to RFC case..
for all RFC communication channels are working but some time it is throwing RFC_COMMUNICATION_ERROR and messages are stucks in smq2 with retry.
when i check with retry error with in sxmb_moni log showing ICM_HTTP_CONNECTION_FAILED with error code 400.
not for all signals for few signals for some time..
Why it is happening i can't understand.
in repository it is saying Repsitory object hmi failed and address already in use.
is there any problem with loading IR objects.
Please suggest me good suggestion for this type of issue what can do for this to resolve.
Regards,
Kiran Polani

Getting the error: Error while receiving by HTTP error code: 110

Hi,
I have developed an interface which actually gets data from SCM system and in BPM to gets additional data from R/3. There are five synchronous call to this R/3 to get different sets of data. I am using only one communciation channle from BPM to R/3. The interface works perfectly OK in the development system. When the interface is migrated to the test system I found that the four calls work perfectly fine while the last call error out as below and the J2ee server goes down:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 110, error text: )</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Any input/help will be appreciated. I have tried increasing timeout/connection alive time but still not get resolved.
Thanks in advance,
Sushma

Hi Prateek,
Thanks. But this note I have checked before and this seems not related. I actually found out the system logs in SM21 and saw the "Operating system call recv failed (error no. 10054)". What I did then is I seach notes related to this error and found a numebr of SAP notes. And I have informed the Basis guys to look into the notes and the system logs. They are working on this and they are deleting the old messages which have errored out. They are suspecting the system memory or too many old messages would have caused this issue.
If you have any knowledge of why this error would have occurred please let me know.
Thanks,
Sushma

DACExecutionPlan: Error while loading nodes. Error while loading nodes.null

Hi There,
One of my DAC Execution Plan is giving following error: Error while loading nodes. Error while loading nodes.null
We have restarted DAC services.
I have reassembled subject area, generated execution plan parameters, and rebuilt execution plan.
But still its is giving same error.
Any thoughts pls?
Thanks,
Raghu

Actually while the EP is in a failed state, I added few tasks and assembled subject area and built EP.
Later when I restarted the failed EP, it was giving below error.
Sol: I maked EP as completed and ran the EP, it went fine.
Thanks for yor help,
Raghu

Error while receiving by HTTP (error code: 110) ?

Hi Experts,
I am working on IDOC to file Scenario.
I am getting this error in SXMB_MONI. What may be the reason.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 110, error text: )</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Best Regards,
Anil

Check these threaads:
Re: XI Error when upgraded to SP14 (Error Code 110) CLIENT_RECEIVE_FAILED
Regards,
ravi

Help error while booting sunfire v440 (error)

Similar Messages

Maybe you are looking for