HELP!!! Errors on my iPod Hard Disk

When i'm updating the songs to my iPod this error appears:
"Attempting to copy to the disk iPod failed. The disk could not be read from or written to."
Can this be fixed???
Thanx.<br>
iPod Mini 4GB Windows XP
iPod Mini 4GB Windows XP

Hello,
I have a same problem, and I am so lucky that I find a way to solve it, hope it works in your case.
You must find a Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iPod Updater and click “Restore”
In case you are not able to find one, go to an Apple shop and ask for a favor.
Last Resort - and hope it can be done by doing a Format on your PC
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iPod Updater and click “Restore”

Similar Messages

Windows 8.1 Hyper-V - Error while configuring the hard disk 0xC03A0014

Hello. I have just enabled Hyper-V on my Windows 8.1 laptop.
Dell Latitude E7440 i7-4600U @ 2.10GHz
I can create a Virtual-Switch but I am unable to create a new Hard Disk or Virtual Machine within Hyper-V. I get the same error for both processes.
Error: The Virtual Machine Management Service encountered an error while configuring the hard disk on virtual machine New Virtual Machine.
Failed to create the virtual hard disk.
The system failed to create C:\Users\user\Documents\Test\New.vhdx .
Failed to create the virtual hard disk
The system failed to create C:\Users\user\Documents\Test\New.vhdx . A Virtual disk support provider for the specified file was not found. (0xC03A0014).
I have ran all Dell Client System updates and all of windows updates.
I have attempted to create a virtual machine on the current SSD and also an external drive. The same error appears.
I have also attempted to create a virtual hard disk via Hyper-v with a Base vhdx, still the same error occurs. I've tested the base image on other laptops of the same model and windows 8.1 without issue.
Any thoughts on how I can fix this?
Thank you,
-Jake

Hi Jake,
"Enable Data Execution Protection (DEP) in the BIOS and make sure the Format of drive file system is not fat32.
1. Uninstall Intel Active System Monitor 3.0, if installed.
2. Disable "Intel IPMI Service" and "Intel Monitoring Agent" Service.
3. Open regedit and locate: HKLM\System\CurrentControlSet\Services\imbdrv.
4. Change the Start Key to 4 (Disabled).
5. Locate HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E97D-E325-11CE-BFC1-0 8002BE10318}.
6. Take ownership of the ‘Properties’ key.
7. Give yourself full permission for this key.
8. Now locate the properties key; if you see a ‘Security’ entry there, that is your problem. Delete this key.
9. Try attaching or adding the VHD again after rebooting.
If above steps did not help, add the Network Service account to Local Administrator group."
It is quoted from the similar thread below :
http://social.technet.microsoft.com/Forums/windows/en-US/55085ff3-0f26-41bd-b590-bb3490e2d6f5/win-7-professional-a-virtual-disk-support-provider-for-the-specified-file-was-not-found?forum=w7itprovirt
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

ERROR CREATED UNDER \SYSMAN\RECV\ERRORS FILLING UP THE HARD DISK

I am using Content DB 10.2.0.0.1 with Infrastucture 10.1.2.0.2 on Windows 2003, and have the situation as described in Bug No. 6164515 on Metalink:
"ERROR CREATED UNDER \SYSMAN\RECV\ERRORS FILLING UP THE HARD DISK
Files like A0000000064.err_2007_06_29_17_45_53 are created in %ORACLE_HOME%\clin-app-01_oasinfra\sysman\recv\errors\ one every minute on the oracle infrastructure instance, filling up the hard disk and bringing the application to a hault."
I have such log generation too, for a few month nearly 10 Gb of logs have been generated. The content of the files are similar, and begin with:

<UPLOAD OMS_PROTOCOL_VERSION="10.1.0.2.0" UPLOAD_TYPE="severity" EMD_URL="http://contentdb:1830/emd/main" MERGE_TIMESTAMP="2008-12-09 18:54:48">
<ROWSET OMS_PROTOCOL_VERSION="10.1.0.2.0" TABLE="MGMT_METRIC_ERRORS">
What can i do to stop this generation?
Is it possible to disable logging, or i need to apply some patch?
Thank you.

Hi,
Anyone have any solution on this error?
I have Oracle DB 10g 10.2.0.3 installed on Windows 2003 32-bit.
c:/oracle/product/10.2.0/db_1/demo_crcl/sysman/recv/errors keeps increasing until 211 GB.
Any kind helps are highly appreciated.
Thanks.

Windows Reformatted My iPod Hard Disk

My husband was reformatting a cd, which was in the e drive. My iPod was connected at the same time. It appears that Windows reformatted both the cd in the e drive and the iPod hard disk at the same time. My iPod was working before my husband reformatted the cd, but after windows said it completed formatting the cd, he noticed the ipod no longer indicated it was charging. He immediately checked the iPod and it did not work at all. My iPod will not power up in any fashion, is not recogized by Windows, and is not in the source list in iTunes as there is no source list in iTunes. I have tried all the basis restart tips available through the online tutorials but none have worked.

Did you have any luck checking for bad sectors? Restoring the iPod may not deal with certain disk errors which should be addressed via regular disk utilities.
Hold Menu+Select for about 6 seconds until it resets, then hold Menu+Play as soon as the Apple logo appears, again for about 6 seconds to put the machine in disk mode. Connect to your computer, closing iTunes if it opens. Browse *My Computer* and right-click on the drive for the iPod, click Properties, then click Tools. Under Error-checking, click *Check Now*. Under Check disk options, select *Scan for and attempt recovery of bad sectors*. Click Start. Mac users should run *Disk Utility / Repair Disk* for the equivalent process. This should find and correct any errors in the logical & physical structures of your iPod's hard drive. Once these have been fixed you can reset the iPod (hold Menu+Select ) and should stand a better chance of a successful restore.
tt2

I have a PC and a need help to configure my external hard disk on my network. Thanks

I have a PC and a need help to configure my external hard disk on my network. Thanks

If you mean you wish to plug a USB drive into the Airport Extreme router (or TC not express) that is easy..
The disk must be formatted FAT32.. as if.. stay away from FAT .. or HFS+ ie Mac OS extended Journaled.
Format the disk on a Mac is best.. and even use GUID partition scheme not MBR.
The PC has no issue writing and reading files because this is a network drive.. The PC does not write to the drive.. it writes files to the Airport OS which writes and reads the disk and passes the info using standard windows SMB.. To the windows computer it will be a Windows NT server.. FAT32 setup.
If your setup is different.. to my hugely guessed assumptions.. give details.. always helps to have.. make and model.
Make and model of disk.. make and model of router.. how the setup will be done.. what windows OS you run.. etc etc.
As it stands your question could have nothing to do with apple at all.. other than you posted in a forum so I guess there is something apple in there somewhere.

Help, my iPod hard disk has a bad sector!

Hello, I'm new to the forums, firstly to start off this topic, I live in the Middle east and as far as I can tell, it's very difficult to get any kind of customer service with apple in the middle east since it's poor.
I had purchased an 80G iPod classic (the 6th gen one) abroad in another country from where I live in Qatar. Now, my mother actually bought me this iPod as a gift for my birthday. I was delighted with it and protected it with all my heart until three months later, where I discovered that the iPod had no power left, so i connected it to the PC, synced my songs and listened to my music for the day.
While listening I noticed that the songs, paused, skipped and wouldn't play occasionally. So when I got home I synced again and I got an error.
"The iPod could not be synced because of an unknown error -60"
Now, this had happened to me a long time ago with my first iPod classic, so I changed the USB ports and tried again but it failed. I have tried everything since then, even restoring it on a Mac at the customer service department in Qatar, but I have not had a single inch of luck. I am really bummed with this problem.
I have only had this iPod for about 3 months, and I am so grateful for having it but, I can't do anything with it now, my songs don't sync and if I try to sync it on iTunes I can't access it from the My computer folder because it says the disk wasn't found.
I took it to customer service for the last time, he checked the warranty on the database of apple products and it said that the country of purchase was in the united states, now I don't live there and I didn't buy it from there so it must have been imported to the middle east. Anyways, he implied that if I wanted a new iPod I could go to the apple department in California and get it exchanged there, but it would be impossible to get it exchanged in the middle east.
I just want some help and I need to know one thing, have I been caught at a dead end? Is there nothing I can do for my iPod, except buy a new one?
If I used a mac and used Disk utility, would that fix the hard drive or bad sector?
Help would be appreciated, thanks.
- David.

Did you have any luck checking for bad sectors? Restoring the iPod may not deal with certain disk errors which should be addressed via regular disk utilities.
Hold Menu+Select for about 6 seconds until it resets, then hold Menu+Play as soon as the Apple logo appears, again for about 6 seconds to put the machine in disk mode. Connect to your computer, closing iTunes if it opens. Browse *My Computer* and right-click on the drive for the iPod, click Properties, then click Tools. Under Error-checking, click *Check Now*. Under Check disk options, select *Scan for and attempt recovery of bad sectors*. Click Start. Mac users should run *Disk Utility / Repair Disk* for the equivalent process. This should find and correct any errors in the logical & physical structures of your iPod's hard drive. Once these have been fixed you can reset the iPod (hold Menu+Select ) and should stand a better chance of a successful restore.
tt2

Can't enable iPod hard disk

I am trying to enable my 30GB iPod to be used as a hard disk to save documents. When I initially plug my iPod into my Mac, the iPod icon appears briefly on the desktop, then disappears.
Then, when I try to select "Enable Disk Use" on the iPod Summary page, I get the message "Waiting for iPod..." for about a minute, followed by "The settings were not saved for the iPod because it could not be found."
The funny thing is, when I used my iPod as a hard disk in the past it worked fine. But ever since I upgraded to iTunes version 7.0.2, it started giving me this error message and I have been unable to use my iPod as a hard disk ever since.

I haven't seen this problem since iTunes 6 and even then I was never able to find a complete answer to the "Preferences not saved" error as it was called then or any knowledge base articles with an official explanation. I did however find a workaround in a previous discussion but I don't know how if you could get it to work with iTunes 7. It involved connecting your iPod and in the short time that it was still visible on the desktop just as iTunes is opening, going to Preferences>iPod and ticking "enable disk use". You had to be quick but it could be done. In iTunes 7 it would mean quickly clicking on the iPod icon in the source list to bring up the Summary tab so you could enable disk use while the iPod was still showing on the desk top.
The only other suggestion I would have is to try restoring your iPod. restoring will erase the iPod's hard drive, reload the software and put it back to default settings, so if you have songs on your iPod that aren't on iTunes you will lose them if you have no back up. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation. If you choose no it will default to manual mode which will default "enable disk use" and from there you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

Help - The chain of virtual hard disks is corrupted

I took a snapshot of a VHD that I tried to expand to 40GB. After expanding I tried to restart the VM but got the error that "The Chain of virtual hard disks is corrupted".
Apparently because I expanded the Parent VHD it threw up this error ( i assume because the snapshot differed in size?)
This led me to Vhdtool which I ran: vhdtool.exe /repair parentvhdfile.vhd snapshotvhdfile.vhd /quiet
This appeared to have run okay. However when I went to restart the VM again I got the error:
Servername Failed to start
Microsoft emulated IDE controller failed to power on with error - the chain of virtual hard disks is corrupted. There is a mismatch in the virtual sizes of the parent virtual hard disk and differencing disk.
Failed to open virtual disks. The size of the vurtua;l disk is not valid.
etc...
I notice that my parent VHD = 40GB in size, whilst the Snapshot (avhd) file = 109K
I think I need your help, I don't know what to do!!

If you made changes to the parent drive, your chain will be corrupted. Changes to the parent disk invalidate all the child disk.
Do you have a backup of the original parent disk?

Ipod hard disk spins continiously when connected to PC, kills battery?

when ipod 4th generation is connected to PC/Windows Pro, connecting to itunes and downloading songs, hard disk spins continuioulsy discharging the full battery in 5 minutes. Battery is good because it will play 5 hours on full charge. Genius at Apple Genius Bar say hard disk spins continiously when it's hook to PC, he say this discharges battery, genius does not know why HD spins continously.... say it should only spin once every 20 min or so while downloading song, when hooked to mac at genius bar, downloads songs as designed

see Restore to factory setting helps
if does not try the following as the spins may caused by the bad sectors on the HD of the iPod
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”

Dad needs help with laptop out of hard disk space

You Ipod users willh have to excuse me but I need some help. Bought my daughter an 30gb for xmas and one by one we are getting thru the problems. She nows has 1100 songs on it but I had to send her my laptop as it would not talk to her p3. Anyway her hard disk is now full on the laptop. Question is do you have to keep all in library to keep it on the ipod cos she cant get more song on? Can she delete anything from the laptop as I think she is going for the full 7,500 songs on her IPOD Thanks people

Use the instructions in this article to set the iPod to sync manually, and then delete the songs from the iTunes library; they will not automatically be deleted from the iPod.
(10519)

The server encounter an error while attaching Virtual Hard Disk in Windows Server 2008R2

Unable to add an existing virtual hard disk in new VM(windows server 2008r2).

Please repost here:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
And include the actual and full error message.

Operations Manager log flooded with 11903 errors due to "Virtual Hard Disk free disk space" monitor

Management Pack: Microsoft Windows Hyper-V 2012 R2 Monitoring (7.1.10104.0)
Monitor: Virtual Hard Disk free disk space
There appears to be an issue with this monitor. Every hour, each of my Hyper-V servers is reporting dozens of errors similar to the following. It seems like there is a disconnect between the expected return type (integer) and the actual type (decimal) when
checking the free space on VHDX files.
Log Name:      Operations Manager
Source:        Health Service Modules
Date:          2/5/2014 7:59:47 AM
Event ID:      11903
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      BEAST.corp.technologytoolbox.com
Description:
The Microsoft Operations Manager Expression Filter Module could not convert the received value to the requested type.
Property Expression: Property[@Name='Microsoft:9AC8FCAB-800D-424F-ABCB-747063E5FCF1\559D22F4-A565-4AD4-9B71-44FC5D815C0C\0\0\L.FreeSpace']
Property Value: 488033.99609375
Conversion Type: DataItemElementTypeInteger(5)
Original Error: 0x80FF005A
One or more workflows were affected by this.
Workflow name: Microsoft.Windows.HyperV.2012.R2.VirtualDrive.FreeSpaceMonitor
Instance name: Hard Disk
Instance ID: {0C0E0759-D846-963C-21E6-3C1A1C096D5F}
Management group: HQ
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Health Service Modules" />
    <EventID Qualifiers="49152">11903</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-02-05T14:59:47.000000000Z" />
    <EventRecordID>32395</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>BEAST.corp.technologytoolbox.com</Computer>
    <Security />
</System>
<EventData>
    <Data>HQ</Data>
    <Data>Microsoft.Windows.HyperV.2012.R2.VirtualDrive.FreeSpaceMonitor</Data>
    <Data>Hard Disk</Data>
    <Data>{0C0E0759-D846-963C-21E6-3C1A1C096D5F}</Data>
    <Data>Property[@Name='Microsoft:9AC8FCAB-800D-424F-ABCB-747063E5FCF1\559D22F4-A565-4AD4-9B71-44FC5D815C0C\0\0\L.FreeSpace']</Data>
    <Data>488033.99609375</Data>
    <Data>DataItemElementTypeInteger(5)</Data>
    <Data>0x80FF005A</Data>
</EventData>
</Event>

SCOM agent is running as SYSTEM. (I used to run SCOM agents as a low-privilege domain account but eventually surrendered to "The Dark Side" due to the number of issues encountered with that approach.)
PS HKU:\.DEFAULT\Control Panel\International> dir
Hive: HKEY_USERS\.DEFAULT\Control Panel\International
Name Property
Geo Nation : 244
User Profile Languages : {en-US}
ShowAutoCorrection : 1
ShowTextPrediction : 1
ShowCasing : 1
ShowShiftLock : 1
User Profile System Backup Languages : {en-US}
ShowAutoCorrection : 1
ShowTextPrediction : 1
ShowCasing : 1
ShowShiftLock : 1

Experience Formatting Gen5 Ipod Hard Disk with Fat 32?

Does anyone have any experience formatting a Gen 5 60gb for Windows hard disk with Fat32? I was thinking of doing this and then restoring from itunes 7.5 to start all over. If so, how did you do it? Thanks in advance. Running Win XP w/SP2

i reformatted my daughter's 5th gen. 30Gig thru 'my computer' but itunes still wont recognize it so i can't use the RESTORE on it. anyway, plug the usb in your ipod and wait for 'my computer' to recognize it then right click on it and and choose format.

Error while opening the Hard-disk

Hi all I am not anle to open the hard-disk. Initially it shows My passport as drive name now ir just shows "E:\" When I try to openthe drive it says - "E:\ is not accessible. The file or directory is corrupted and unreadable. Id ask me to formate when I connect to my laptop. I have my sensitive data in it and can not formate it. -Divya

If you have not backup the data, then you can try data recovery software to retrieve the data.

Please help: error message says ipod cannot be read from or written to

Hi
I have been using my iPod Video for a couple of months now without any problems, until yesterday. I tried to sync it after I downloaded a couple of new songs when I got this error message: "Attempting to copy to the disk 'Jason's Ipo' failed. The disk could not be read from or written to."
The 'Jason' in 'Jason's Ipo' is me.
Any help would be very much appreciated!
2002 PC Windows XP

Thanks, that was helpful.
While I was waiting for your answer I restored my iPod to its original settings. The screen is now black and white and the font changed to something smaller. Is this normal? How do I put the playlists and songs back in? Please post a link if there is a page on this subject.
Thanks again.

HELP!!! Errors on my iPod Hard Disk

Similar Messages

Maybe you are looking for