Help evaluating complex boot camp installation

I need to do a bit tricky boot camp installation, and would appreciate if somebody could evaluate before hands whether the plan outlined below should work, or if i should try some different approach:
Current setup is Tiger with two OS X partitions (16gb root, rest mounted under /Users)
Desired setup is Tiger with two OS X partitions, AND a Windows Vista partition.
Plan is:
- Make disk image of the current (Tiger) root partition, and backup of /Users
- Boot from install DVD, re-partition the internal disk to single partition, restore the disk image to the single partition
- Upgrade to Leopard
- Install Boot Camp and Windows Vista
- Use 'diskutility resizeVolume' to split the Leopard partition to two
- Overwrite the first partition with the original Tiger disk image
- Restore Data to the second partition
How about? Will Boot Camp continue to operate when i overwrite Leopard system with the Tiger disk image, and when i split the single partition to two pieces? Or is there some other recommended way for doing this?
Thanks,
Henri Karapuu

'diskutility resizeVolume' should had naturally been 'disktool'. Also sorry about the layout, for some reason single dashes in front of each line got eaten.

Similar Messages

Boot Camp Installation: Definition of, and insights into "External Drives"?

I'm recovering from a logic board failure. One casualty was that I lost my prior Boot Camp installation of Windows on my main internal hard drive. :-( Wondering if I can install Windows anywhere other than the main internal hard drive so I can maximize space on my OSX main internal drive?
From what I've gathered, installing Windows 7 Boot Camp is very difficult (and perhaps impossible?) on an external hard drive. However, what's not entirely clear is what constitutes an "external drive".
Questions:
1. Can I install a bootable installation of Windows 7 using Boot Camp (obviously not running OSX in this scenario) on either the:
A) Data Doubler 7,200 drive
or
B) Express Card 34 SSD drive
2. Can I also install Parallels (on the main internal OSX drive), then while in OSX launch (a much slower) Windows from location A or B?
Context:
1. On a late 2011 MBP 17' (version 8,3), I've replaced the stock hard drive (7,200 rpm) with a much faster OWC SSD Drive. (Awesome upgrade, btw!)
2. The internal apple dvd device was removed and the stock hard drive was inserted in this location using OWC Data Doubler. (Also, very nice.) An extra challenge here is that the dvd drive is now an external device. I have a Windows 7 install disc, but I'm not sure if it will be recognized during the installation process?
3. This model MBP has an ExpressCard 34 slot, for which I can buy an SSD drive. Never used this slot and have read mixed reports on boot ability.
Any and all insights greatly appreciated!

Yoüf wrote:
Many thanks for the helpful response, Loner T. I think I've got it. To install Windows through BCA on the Optibay drive, I temporarily move it to the main SATA bay. I can then temporarily put the DVD drive back in the Optibay. So here's a question: In doing this, I would no longer have an OSX boot drive (since I'm temporarily removing my OSX boot SSD). It's been a while since I used BCA, so my memory is fuzzy (sorry), but does the BCA process need a working OSX install on the drive in the SATA bay?
The SSD with OSX boot is normally (for your specific scenario) kept in an external enclosure (USB/FW/TB) to boot from and run BC and partition the disk in the main SATA bay.
You mention that modifying the BC info.plist causes issues. I lost you a little here. Using the method you describe (move the Optibay drive to the SATA location, run BCA to install Windows, then move the drive back to the Optibay location), does the BC info.plist need to be modified or not? If yes, a few more details would be welcomed. If not, what prompted this thought?
If you have a functional Optical drive and the designated Windows-to-be in the proper bays, the BC info.plist modifications are unnecessary, and can cause other grief, and are best avoided.
Thanks also for the bleeptobleep post. It says to use a USB3/Thunderbolt external drive (which I do have); however, my MBP (version 8,3) only has USB2 ports. I realize that a USB2 port will read a USB3 external drive, but was wondering if this limitation is a deal breaker for a bootable Windows system, or if it just means that things will be really, really, tragically slow due to low transfer rates. Any idea on this aspect?
USB3 can cause problems for Windows 7 installer, bot not as many issues for Windows 8+. It is better to stick to USB2, but you are correct it will be slow. OSX can boot and will use RAM much more aggressively, unless it has to go back to the USB (2/3) when things may give you a beach ball. Windows 7/8 are less friendly for caching the whole OS and applications in RAM, and may be slower. A TB connection is much faster (TB2 even better).
BTW: Bummer that the ExpressCard slot can't work for booting into Windows. That would be pretty slick. I've seen some older posts by folks who were once able to do this, but seemingly only with early versions of OSX. Apparently newer OSX versions either did away with this feature, or seriously complicated the process. Would love to find a workaround if one exists.
You can test it, but may have some issues finding storage for ECards.
(Dumb question: on this forum, how are you threading comments into a quoted block of text? Are you using HTML or is there some easier way?)(((
Under the "Reply" bar at the top, there is an icon with a "quote" and a "speech" bubble, which is used to quote posts. You can either quote from a previous post, or select a line (or more) of text and click on that icon.

Help, Windows Boot Camp Installer Freezes Befor Finshing Installation

MacBook Pro 2.6 4g Ram 200Gg hd, 17hd 10.5 Leopard
Gave windows 25g
Installed Windows XP Home SP2 no problem,
Windows runs
Installing Boot Camp for Windows - Freezes on The Atheros wireless install - Hard Freeze - (left it for 30 min So far.) Mouse is frozen, keyboard dose not work.

Justin:
How about we try this:
1. Hard Wire the internet connection to your Macbook Pro via the ethernet port
2. This should allow you to connect to the internet
3. Open Internet Explorer
4. Choose Tools from the menu of the Internet Explorer and then click on Windows Update
5. This should open a separate window from which you can choose update and at that point windows update should get the drivers for Atheros and list them as Optional Update. Install those drivers.
I am not sure if you can even get this far but is worth a shot.
Axel F.

MacBook Pro 13" Late 2011 Experiencing Significant Slow Down After Boot Camp Installation

     Okay, so today, after installing Windows 7 on my MacBook Pro via Bootcamp Assistant, I experienced significant performance slow down (fans going at full blast, applications opening after extended periods of time, keystrokes not being registered) when I returned to my OS X partition/second hard drive. I have dual hard drives, one of them being a Samsung 256 GB SSD with OS X Mavericks and the other being my original 500 GB HDD, divided into a 250 GB OS X Mavericks partition and a 250 GB Windows partition. I have the SSD set as my startup disk and I have it located in the main HDD bay. I moved the old HDD into a caddy and placed it where the optical drive normally should be.
      After multiple failed attempts to install Windows via USB and Bootcamp Assistant, I decided to reinstall my optical drive and use a Windows installation disk. This attempt proved successful, and I was able to install Windows 7 onto the 250 GB partition I had created for it on the 500 GB HDD. After completing basic setup of Windows, I removed the optical disk drive and reinstalled the SSD and the HDD into their original spots (SSD in the main HDD bay, HDD in the caddy where the optical drive normally is).
     After completing this tedious process, I booted my Mac back up using the SSD. However, I noticed something was wrong when the login screen, apps, and nearly everything else on my desktop had slowed to crawl. I decided to check my Activity Monitor to see what the problem might be. Activity Monitor told me that the task "kernel_task" was taking up anywhere from 200-600% of my CPU, which explained the slowdown in performance. I looked around to see if there were others with the same problem as me, and I found that Spotlight Indexing might be an issue, with a potential remedy being move my Bootcamp Partition into the Privacy section of Spotlight under System Preferences. After doing that, I experienced no increase in performance and everything was still going very slowly.
     The next step I took was to see if booting into Safe Mode would help the issue. After booting into Safe Mode on my SSD, I noticed that things were back to their normal speeds, with applications opening at the speed they should be and keystrokes being registered instantaneously. However, the fans were still going and had not shut off once booting into Safe Mode. In addition, I checked Activity Monitor and the "kernel_task" in question was no longer taking up massive amounts of the CPU.
     At this point, I don't know what to do and I need help in restoring my Mac to original speeds. I may end up deleting my Boot Camp partition as a last measure if all else fails, seeing as I installed Windows in the first place for running a few programs and games that I can live without. However, I'd prefer to not have things come to that and fix things before deleting the Boot Camp Partition. I've heard that if everything runs normally in Safe Mode, then the issue is third-party software. Is this true?
     Any help would be greatly appreciated as I am writing this from the MacBook in question in Safe Mode because it's essentially useless in normal SSD operation.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -depth 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 4 3 32 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

A few questions about Boot Camp: installation, performance, which Win OS?

Hello.
I am planning on getting a windows OS. My main motives for this are because I would like to get some PC only games (I've been eyeing that Fallout 3 Game of the Year Edition that is soon to come out) and because there is a good chance that I will need some PC only programs for my college work. I just had a few questions before I did anything. Note: I am running 10.5.8 now but getting 10.6 soon.
1. According to wikipedia: "Its functionality relies on BIOS emulation through EFI and a partition table information synchronization mechanism between GPT and MBR combined". The only word I understood of that sentence was "emulation." I know that emulation software significantly reduces performance. Is this true for boot camp? (say i were to get the exact same game for both mac and windows and set them to the exact same performance settings, when playing on windows, would there be more lag than on OS X?)
2. Which Windows OS should I get? Since I am just going to be using Boot Camp to run games and a few other programs, would XP be the best to get to optimize the application's performance (as opposed to Win 7)?
3. How complex is installation? I am a decent Mac techie, but this is my first time with boot camp, and I am a Windows noobie.
4. There seems to be a lot of talk about partitions. What exactly is a partition? I have some theories, but want to know for sure.
Message was edited by: Tomatoes&RadioWires

Hi,
check out the following link, excellent advice and performance tests on gaming.
cheers,
Dave
http://www.mactech.com/articles/mactech/Vol.25/25.04/VMBenchmarks/index.html

Two Boot Camps installs on the same Mac Pro?

Is it possible to install two Boot Camps on two different internal drives on a Mac Pro? Can I rename the Boot Camps disks to, say, BOOTCAMPXP and BOOTCAMP7? Will this confuse the startup disk system preference in OS X or the Boot Camp control panel in XP and Windows 7?
I would really appreciate any help here.
Steve

Hi,
first: be sure to have/make a backup of what you have now.
second: have a look at the instructions here http://www.harbar.net/articles/mbptb.aspx
The order you need to do the installation/partition is this:
Mac OSX, Win XP (instead of Vista), W7 (instead of Windows 2008 server) (as used in the linked article).
Good luck
Stefan

Installing Windows 7 Without Using The Boot Camp Installer (MacBook Pro)

I don't know if anyone knows this or not, but I was able to install Windows 7 on my MacBook Pro just using the Windows 7 install disk.
I restarted with the windows CD in, and when the screen said press any key to boot from CD, I pressed the space bar. When it got to the part to select the installation drive, I went into advanced and removed all the partitions and formatted the whole thing. There was a small system partition the cannot be deleted (probably reserved for the system). I was able to install Windows 7 and use the whole drive for it.
After running Windows 7, I was still able to install the Boot Camp Control Panel to set the keyboard, track pad, sound, and all the other funtions. If I tell it to reboot to the Apple OS, it just reboots to Window 7 with no problems.
Anyway, I thought it was pretty cool and might be helpful for people who want to run only Widows 7 on their MacBook Pro.
CAUTION... DO THIS AT YOUR OWN RISK!!!

People have been using Mac as Windows-only.
On Mac Pro, with 4 internal drives, it is normal to not use anything other than the Windows DVD and install onto a dedicated drive, same as you did, only change it from GPT to MBR first.
There is no risk.
(Well, some feel that someone might 'need' OS X to do something like a firmware update I guess.)

Enormous frustration over Boot Camp installation of Win 7 64bit

Please help, I am totally frustrated after days and days of trying to install windows 7 on my iMac 11,2 (21.5”, i3, mid 2010).
So, my super drive is dead and currently I don’t have an option to replace it. I recently upgraded my OS to 10.8.3. Because my iMac is having an optical drive, in Boot Camp Assistant there was a grayed out option to create bootable USB drive. I edited info.plist file, so I finally got that option right, but no metter what, I can’t boot Windows 7 64bit installation. I’ve tried numerous ways to do that. I tried standard create USB in Boot Camp assistant, I’ve tried Windows download DVD/USB tool, I’ve tried Rufus, BootInIc, I’ve tried more than 10 different Kingston/Verbatim/No name/Corsair/Patriot USB sticks, I’ve tried several WD/Toshiba/Transcend/Silicon Power external drives formatted both fat32 and NTFS (when formatting external drive in fat32, I was reducing the external drive’s size with diskpart/create partition primary commands in windows. EVERY SINGLE TIME after partitioning the hard drive in Boot Camp Assistant, my computer restarts and there was a “No bootable device” screen. I’ve than tried Refit, there I get an option to boot from external drives/usb sticks, but than after clicking on a boot windows from USB I also get the “no bootable device” screen. I’ve tried naming sticks different (because some people are saying that it must be named WININSTALL, but without any success)
Thank you very very much in advance, currently I don’t know what to do next.

If your iMac came with an internal optical drive you can not use the USB port to install Windows. Get the optical drive fixed.

Issue with boot camp installation

Hi, i have som problem with installing boot camp. I get an error message in the Windows installation guide that my superdrive are missing the correct drivers. I have tried to eject the Windows disk to insert my Snow Leopard recovery disk, but i cant eject it during the set up.
Any suggestions?

First post so sorry if this is not in the right place but wanted to post this so it might help someone. I have installed boot camp on macbook air and had no issues. We were trying to install Boot Camp on new macbook pro with 10.7.4 and boot camp 4.0.4. We could not get it to burn the windows support files. It would download the windows support files but fail to burn every time with no option to save the file. I forget the exact verbage. After searching all over the web / forums, etc we tried several times and it would fail every time. We finally thought that maybe it was too large of a download to fit on a CD so we tried it with a DVD and BINGO!! I feel stupid but seriously!!!! It couldn't just tell us that the target was not large enough. Just wanted to post for others. Thanks

Failed Boot Camp installation

Hi all,
I am trying to install Windows 7 from a USB drive using the Boot Camp Assistant, which also helped me setting up the usb device.
I followed the correct procedure, but right after partitioning osx freezed. At the next reboot, I had to keep alt pressed to boot into osx, as the default boot device was set to the empty Windows partition. Now Boot Camp is convinced that Windows is actually installed in the second partition, and only asks me if I want to uninstall it, thus removing the partition. I don't want this - it's very time consuming and I fear that the whole thing will repeat again. I just need OSX to reboot and recognize the USB disk, to be able to install Windows. This is not possible just by pressing alt at boot, and doesn't work from rEFIt. Any idea on how I could perform this? Thanks

Shut Down and then try rebooting with the Windows USB Installation drive you made attached to a USB port.
At the chime hold down the OPTION key and eventually the drive icons will appear.
Select the USB drive icon and hopefully you will be able to start the Windows installation.
If the USB icon doesn't work you may have a bad Windows.iso burn and may have to reburn it.

Can someone help me install Boot Camp drivers to Windows 8?

Hey guys, I just installed windows 8 32 bit developer preview on my mac via boot camp. im not very familiar with exactly how boot camp drivers work, so i need a little help. First i will tell you what i have done.
1. installed win 8.
2. tried to run the boot camp 3.3.exe in windows 8. I used the troubleshoot compatibility option but an error camp up saying boot camp was already installed.
3. then i rebooted holding the option key so to boot up in osx. i then extracted the bootcamp 3.3 files to a flash drive.
4. after booting back to windows, i tried doing the compatitbility settings again with each individual file within the bootcamp 3.3 files. an error popped up saying something like "check to see if your hardware needs 32 bit or 64 bit version of this software." (i dont remember the exact wording)
i did some googling but i figured that i could get professional help from you guys.
I am going to classes all day so please be patient, because i wont be able to check this until later this afternoon.
help is very much appreciated. thanks in advance.
kpasa.

you need boot camp 3.0.x first before later versions can be installed;
Or,
I don't know what currently Boot Camp Assistant in 10.6.8 will also do a download of drivers.
But other than change Properites and try setting "use Windows 7 mode" and such, I think you are left high and dry with whatever is in 8.
And I use 8 on two of three systems. I left my Mac Pro @ Windows 7 for now but I much prefer Windows 8, yes.
I would not have chosen or gone with any 32-bit version. As long as you have 3GB RAM or more, forget it. Use 64-bit.
I have not seen or rather read any "success" stories with 8 and Apple drivers though.

Can I use a Windows 7 backup in a boot camp installation

Hi,
About to buy a Mac and I was just wondering if I could use a Windows Backup System Image to install Windows 7 using Boot Camp Assistant in the Mac or if I need to have a brand new copy of Windows.
Apologies if this sounds like an incredibly stupid question.
Thanks for any help in advance.
Ben

If you restore the system from the backup, you would recover all your stuff, configuration, apps, etc. However I concur that you will need a new Windows license. MS offers no way of deactivating a previous instance and transferring it to a new host, at least in the workstation version. Were it a Server version, you can disable the activation on the old host and reuse the license on the new (just checked).
The license/activation key is tied to the startup volume's UUID number, which is unique.

[HELP] Windows 7 Boot Camp Boot Problem?

Hi,
I have a problem when booting windows 7 after installing it using bootcamp.
Here is what i did:
1) Used Boot Camp assistant to "Install Windows 7 or later version" (Last tick box option) - This also partitioned my drive.
2) While Windows 7 was installing it rebooted several times, I held the option key to select the Windows 7 instlltion disk for every reboot.
3) Once Windows 7 had finished installing I installed Boot Camp 5 for Windows 7.
However everytime I restart my Macbook Pro it boots into OSX Mavericks fine, When I go to startup disk there is no option to select the Windows 7 Boot Camp partition.
When I hold the option key while turining on my Macbook Pro I get the option to select the Windows 7 Partition, but when i select it I get a grey folder with a question mark. However when I turn on my Macbook Pro (with the Windows 7 installation disk inserted) holding the option key, when i select the Windows 7 disk it boot the Windows 7 partition fine?
I have installed reFind and tried that but I get an error: http://puu.sh/80FZt.jpg
What can I do to fix this? I want to be able to boot into Windows 7 without having the Windows 7 installation disk in the SuperDrive, and i also want to have the startup disk preferences to display the Windows 7 partition.
Thanks in Advance
Harvinder

Ok, I have done what you have both said (bobthefisherman & turbostar):
1) Deleted Windows 7 partition with BCA
2) Selected all 3 options in BCA, which created a USB install and it also partitioned my HDD
3) I waited for it to reboot and then it came up with a grey fold with a question mark in it
I never intervened with it in any way.
How do i fix this now? Any further suggestions?
Thanks
Harvinder

Boot camp installation of windows 8.1

Hey Gang,
Struggling here with using boot camp to load windows 8.1.
My machine: Macbook Pro retina, 15 mid-2014 2.8GHz, OS X 10.9.5 867GB
Strange I cannot find straight forward directions on the web.
Everything apparently works smoothly until windows starts up. I cannot find the Boot Camp partition.
Got to this point 5 times now.... :-)
HELP!
jc

Loner T,
Here is the output from the terminal:
gpt show: /dev/disk0: mediasize=1000555581440; sectorsize=512; blocks=1954210120
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1954210119
       start        size index contents
           0           1         PMBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1429687552      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1430097192     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1431366728   522843359
1954210087          32         Sec GPT table
1954210119           1         Sec GPT header
$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 121643/255/63 [1954210120 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 - 1954210119] <Unknown ID>
2: 00    0   0   0 -    0   0   0 [         0 -          0] unused
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused

Can not boot into OSX after boot camp installation and resizing of Macintosh HD

So from the beginning what I was trying to do was set up my iMac (27-inch, Late 2013) with boot camp so that I could play some old windows based games that can not be played in Parallels.
I went through the Boot camp process and everything set up just fine.
I had both OS X Yosemite 10.10.2 and Windows 8 Professional running but as I was installing games on to boot camp I discovered I did not allocate enough space and needed to extend the Boot Camp partition.
I used boot camp utility to set OS X as the default start up disk and had it restart
I launched into OS X and used Disk Utility to shrink Macintosh HD another 120GB
Restarted again holding option and launched into Windows
Used the disk management in windows to try and extend the boot camp partition into the unallocated space.
It was not an option to extend it so I tried to create a new simple volume from the unallocated space then delete it and try to extend it again.
It still was not an option.
From there I went to restart again while holding option and the only options I had were 10.10 Recovery and Windows
I tried using disk utility in recovery and Macintosh hd now only showed disk0s2
I tried to verify and it could not verify
I tried to repair and it could not repair.
I put the iMac in target disk mode and using a thunderbolt cable I tried using disk utility from my MacBook Pro (13-inch Mid 2012)
Verifying volume “disk2s2”Verifying file system.** /dev/rdisk2s2
Invalid BS_jmpBoot in boot block: 000000
File system check exit code is 8.Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “disk2s2”Repairing file system.** /dev/rdisk2s2
Invalid BS_jmpBoot in boot block: 000000
File system check exit code is 8.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
This is the same error I got on my iMac
I used terminal diskutil list and got:
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk2
   1:                        EFI EFI                     209.7 MB   disk2s1
   2:       Microsoft Basic Data                         799.3 GB   disk2s2
   3:                  Apple_HFS Recovery HD             650.0 MB   disk2s3
   4:       Microsoft Basic Data BOOTCAMP                70.3 GB    disk2s4
I can see that Macintosh HD was disk2s2 but it now shows its Microsoft Basic Data.
I did not format this partition and it was working fine till I restarted the computer after resizing Macintosh HD.
I am not sure what I can do to fix this.
I've found multiple articles about similar issues, but the issue thet they have was that they could not boot to Windows instead of my issue not booting to OS X

****************    Update    *****************
From the Windows Partition using Disk Management I can see that the drive is still labeled Macintosh HD and that all of my data is there.
I have a complete backup so i'm not worried so much about the data.
What I'm most interested in is trying to solve this issue because I'd like to continue using boot camp and I actually work with mac computers and would like to be able to help others if this issue arrises again.

Help evaluating complex boot camp installation

Similar Messages

Maybe you are looking for