HELP! Exchange 2003 Portlet Integration Problems

I am setting up Oracle Portal for my company and would like to use the Exchange 2003 portlets for each users home page. After multiple attempts to get it working, our DBA and Application Server expert has run into the following road block:
User authentication fails when different users try to access the exchage 2003 portlet inside portal. One person, the first one configured, can access his mail, but everyone else is denied.
Since each employee is linked to a specific mail account on our company's Exhange server, do we need to create an external application portlet for each persons home page (300-400 estimated)?
Or, should we be able to pass <inputParameters> from the external application provider through to an employee's home page and use only 1 external application porlet? Is there a way to pass in their mailbox name and password by using SSO and page parameters?
I need to roll this out over the next couple months and would REALLY like to have this feature.
Message was edited by:
user559873

Hi,
Have a look here
Collaboration Portlets: calendar, task, email, contact
Thanks

Similar Messages

Get Some Problems when Installing Exchange 2003 Portlet

Hi,
I am trying to setup exchange 2003 portlet, all the prerequisitions are done. I follow the installation guide (http://www.oracle.com/technology/products/ias/portal/point/exchange2003/installation.html) and all works well till to step 6(Test the ASP page access to the sample Exchange 2003 mailbox). I am sure all the parameters passing in the url are correct, but still get and http not found error.
I have referenced the thread here(Re: Installing Microsoft Exchange 2000 Portlets which said that the cdo lib should be registered first. But i still have this problem after i have register the exchange server 2003's cdo lib which version should be 1.21. So i am wondering whether the cdo version is restricted, if it does, which cdo version should i use in Exhcange 2003 environment? the 2000 one?
i will appreciate anyone who gives me suggestions or hints to solve this problem.
Thanks in advanced.

Hi,
Are you looking for Customizable portlets (Task,Calendar,Mail,Contact) for Exchange Server 2000/2003 on Oracle Portal Server ?
do let me know..
nJoy Work
~Neeraj Sidhaye
try_catch_finally @ Y !
ExtremePortal @ Gmail dot com

Exchange 2003 - Apple Mail problems

Very strange problem occurred this morning. I've seen numerous posts with similar characteristics, but no resolution. I'll try to be as detailed and concise as possible:
Problem: Can't connect to Exchange server to send or receive mail
Symptoms:
- Mail's Activity viewer show's "Logging in as user 'username'" for long periods
- Mail's Activity viewer show's "Comparing notes with server" for long periods, if it gets this far
- Mail's Activity viewer displays "Synchronizing with server" for long periods, if it gets this far
- Mail's Activity viewer displays extremely slow download of mail headers, if it gets this far
- Entourage v.X and 2004 clients can connect without problem via Exchange protocol, whereas Mail clients (v1.3.11 and 2.0.7) using Exchange or IMAP cannot
- Mozilla Thunderbird clients can connect without problem via IMAP
- PC clients using Outlook 2003 for Exchange have no problem at all
I'd love to get this resolved without having to reinstall clients building-wide. I'm not convinced this isn't related directly to Exchange 2003 and/or Active Directory, but suspecting and proving are two different things. Additionally, Mail seems to be the only client affected.
Any assistance would be greatly appreciated. As always, if we find a resolution, I'll gladly post it here for everyone's benefit.
Thanks.

This problem is endemic for me, but I find that it's the worst with large mailboxes. One user I have has 7700+ messages in her inbox and simply can't synch with Exchange 2003 using Apple Mail (Tiger). Others see the slowdown initially, but then it goes away and new mail comes in. I don't think it's the Exchange server because I use the same config every day, with 1200+ messages in my inbox and many more in my folders, with barely any slowdowns. I theorize that the large number of messages in the inbox and folders has something to do with it - I had some success with another user by taking lots of msgs out of the inbox and moving folders out of the inbox too.
Entourage v. X works fine, but I don't have Entourage 2004 to compare it with. Outlook 2003 on the Windows side is fine too. It's just Macs running Tiger with Mail 2.0.7 that have delays. Any tips or help would be greatly appreciated!!

Need help: Exchange 2003 Public Folder migration to Office365

Been working on this Office365 migration for awhile and down to public folders migration. Its been a VERY difficult experience dealing with India techs, but I am almost done. Here are the details: Migrating from Exchange 2003 to Office365. All users have been migrated. Now we are left with the public folders and shared "Master Calendar". I have exported the public folders to a PST file and I now need to import to Office365. Google results on this topic are not clear to me. Can somebody please walk me through the best way to finish my migration?
Hopefully we can finish the cutover before Friday so we can change the MX record before the weekend.
This topic first appeared in the Spiceworks Community

Hi,
Please check if the links below are helpful:
http://technet.microsoft.com/en-us/library/bb331970(v=EXCHG.141).aspx
http://exchangeserverpro.com/migrate-public-folders-from-exchange-2003-to-exchange-server-2010/
Since this issue is more related to the Exchange side, I'd recommend you post your question to the Exchange forum:
http://social.technet.microsoft.com/Forums/en-US/home?category=exchangeserver
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents,
and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thank you for your understanding.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Lync 2013\Exchange 2010 OWA Integration Problem

Hi there,
I've got a vexing issue that I haven't had much luck in researching. I am running Lync 2013 on Server 2008 R2 and Exchange 2010 SP3 on Server 2008 R2. I followed Jeff Schertz's instructions (http://blog.schertz.name/2010/11/lync-and-exchange-im-integration/)
and Lync\OWA integration is working--sort of.
We currently have a central pool (we'll call it lyncpool.contoso.com) and three pools housed on SBAs-- lyncsba-loc1, lyncsba-loc2,lyncsba-loc3. Users in our main location are housed on the central pool, whereas users in our remote locations are housed
on their respective SBA.
Following the instructions, I pointed my OWA virtual directories at lyncpool.contoso.com, and everything seemed fine at first. I could see presence in OWA, initiate an instant message...the works. However, when I asked a user homed on one of the SBAs,
he said that he could only see presence for other users in his pool\location. Everyone else had a white "unknown" presence chiclet. To verify, I temporarily moved my lync account to that branch pool, and sure enough--I saw the same thing. As
a troubleshooting measure, I re-ran the OWA configuration portion and instead of using the central pool as the instantmessagingserver value, I pointed it directly at that branch pool. At that point, he and I, being homed in that branch pool, could see
presence for EVERYONE. Problem solved, right? Well, no...because now, the central pool users could only see presence for other central pool users, and the other branches could still only see presence for their poolmates.
I've run Wireshark, CLS logging, you name it--I haven't seen anything fishy, and I'm starting to wonder if this perhaps a bug or an unsupported use-case(I hope not, since Microsoft otherwise endorses such a configuration). I've been beating my head
against this wall for almost two weeks with no change...someone, help! :)

This is the only thing that seems of interest in the CLS Log:
TL_WARN(TF_DIAG) [lyncpool01\VGTLYNCFE-01]1B70.4184::06/17/2014-20:47:03.028.00001F75 (SIPStack,SIPAdminLog::WriteDiagnosticEvent:SIPAdminLog.cpp(805))
[1781536493] $$begin_record
Severity: warning
Text: Cannot process Route headers from a non-trusted source, or with first Route field in the set not matching the connection on which the request arrived
Result-Code: 0xc3e93c5e SIPPROXY_E_ROUTING
SIP-Start-Line: SUBSCRIBE sip:LyncPool01.xxx.net:5061;transport=tls;ms-fe=VGTLYNCFE-01.xxx.net SIP/2.0
SIP-Call-ID: 45c62e9edaee4252908914b37ca5ef23
SIP-CSeq: 1895 SUBSCRIBE
Source: mail.xxx.net:47892
$$end_record
The "source" here is our OWA server. I have issued a certificate from our local CA(the same one that issued the Lync certs), making sure the CN of the certificate matches the OWA url. Any ideas?

HELP! Form-Report integration problem!

Hi all, I have a problem in integrating report in dev10i. I used to use Dev6i and have no problem in using run_report_object in 6i. I have posted this in Report for few days but haven't got response.
I got the REP-0503 You did not specify the name of the report and FRM-40738 Argument 1 to builtin Report_Object_Status can not be null. The report run OK in report builder and I create the paper only layout. Also, I save the report as *.rdf and create a report object in form that point to this *.rdf file.
This is my PL/SQL code:
PROCEDURE P_PRINT_REPORT_OBJ(vc_reportoj Varchar2, vc_reportserver Varchar2, vc_runformat Varchar2) IS
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
BEGIN
v_report_id := FIND_REPORT_OBJECT(vc_reportoj);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_DESFORMAT, vc_runformat);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_SERVER, vc_reportserver);
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_OTHER, XXX='||:XXX.XXX||' paramform=no');
vc_ReportServerJob := RUN_REPORT_OBJECT(v_report_id);
vjob_id := substr(vc_ReportServerJob,length(vc_reportserver)+2,length(vc_ReportServerJob));
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
IF vc_rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||vjob_id||'?server='||vc_reportserver, '_blank');
ELSE
message('Report failed with error message '||vc_rep_status);
END IF;
END;
What gives? Do I miss something here? Do I have to set up other thing??? Also what is the name of report server in Dev10i? I am under impression that this is not needed so I put blank '' when I call this procedure in WHEN-BUTTON-PRESSED trigger like this:
P_PRINT_REPORT_OBJ('myreportobj','','HTML');

Hi all, I created simple report from 1 table and save it as *.rdf. I then make a simple form consisting 1 block and a button that have WHEN-BUTTON-PRESSED trigger that call P_PRINT_REPORT_OBJ. I create a report object in the form that point to my *.rdf report file and name the object MYREPORT. This time it gives Rep-0110 Can not open file '%n~<intangible character>' and REP-1170 Error while opening or saving a document. After that other message popup with REP-0110. It seems that FIND_REPORT_OBJECT could not find the file at all/giving the wrong filename as argument. Do I have crooked installation? I have tried it on 2 diff machine running XP2. Is this because of Win XP2? I have admin privilage user account for winXP2. Please help, this is not making a sense at all. I have no problem in Dev6i.
PROCEDURE P_PRINT_REPORT_OBJ IS
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
BEGIN
v_report_id := FIND_REPORT_OBJECT('MYREPORT');
vc_ReportServerJob := RUN_REPORT_OBJECT(v_report_id);
END;

Will Microsoft Exchange2000 Portlet work with Exchange 2003

Hi All,
Has anyone tried using Microsoft Exchange2000 Portlet with Exchange 2003 ? Or is there any Portlet available for Exchange 2003 ?
Thanks in Advance.
Dipak

I'm facing problem with Exchange 2003 portlet which is not working with all users. it's working good only with the one user. I mean it doesn't allow the other users to put there user name & Password .
Please help me with this portlet or is there other portlet for exchange 2003
Thanks
Waleed

Mail and Exchange 2003

I am having a heck of a time getting Mail in Snow Leopard to work with Exchange 2003. Since Mail natively supports Exchange 2007 I have to use IMAP to connect to Exchange 2003. The problem I have is when Mail is running and communicating with Exchange it slows the server down to a point where it affects all other users connecting to Exchange. It causes long delays and Outlook displays a message stating it lost connection to Exchange and is waiting for a connection. If the user running Mac Mail closes Mail then the server is back to normal. I have seen other references to this in various forums however I am unable to find a fix. I tried configuring Mail to connect directly to Exchange via IMAP, and I have also tried using DavMail as a local mail gateway however Exchange slows down in both scenarios. What can I do?? The Mac user really wants to use Mail however I am close to the point of telling him it is not possible with Exchange 2003.

I'm having some kind of related problem, not slowness but connection to Exchange.
I have been successful in connecting my Iphone, and it works great with calendars and address book, but no way to get Mail to connect...
Any body who could help me would be more than welcome, as I feel the problem being around domain or something.
What is weird is that on the Iphone the number of parameters to set is limited to 5 plus description:
Email
Server
Domain
User
Pwd
Description
Plus a toggle switch for SSL
In mail
Description : Ok
Address : Ok
Complete name : I think I know
Internal server :
External Server :
User ID : Ok
Pwd :
Then I advance
External server Path: ???
Internal Port:???
External server Path : ???
External Port :???
Then in "sending server"
Port: ??
User ID : Ok
Pwd : Ok
This a bit complex and I really do not understand why I can make it work on an Iphone seamless in a couple of minutes, and after hours of sweating this thing refuses to work on Snow Leopard.
Many Thanks in advance.
PS : options are translated from French that's why they might not be the exact naming in Mac OS X 10.6.3 in English.
Message was edited by: Gillesb15

Error when calling inbox.asp for inbox portlet exchange 2003

I have installed IIS6.0 and have followed the instruction on POINT website for deploying Microsoft exchange 2003 on Oracle AS Portal. I have sucessfully managed to browse the hello.html page and it works fine, but when i try pointing to this URL:
http://10.1.222.55/exchange/inbox.asp?mailbox=ckhimjee&server=jsadl02
i get the following message:
Server object error 'ASP 0177 : 800401f3'
Server.CreateObject Failed
/exchange/inbox.asp, line 175
800401f3
Please help as client is wanting to see email from Portlet and I need to get this to work.
Thanks
Chetan

No answer unfortunately. Just the same problem.
Anybody have an answer for this ?
IIS 6.0 on W2K3
Portal 10.1.2.0.2 (Build: 139) on RHEL 3
Hello.html loads fine

IPhone 4S IOS5 problems sync Calendar with Exchange 2003

One of my users is having problems sync Calendar with a brand new iPhone 4S running IOS5 and our Exchange 2003 Server. If an item is updated in Outlook it will not reflect it in the iPhone or viceversa. New items show up in both, only the updates in notes or changing some text in the subject or other elements in one side is not updated in the other side. Any help will be greatly appreciate.

Hi man, I got the same problem with my iPhone, but it has been solved..
First, You need the Outlook 2003 or 2007 only, if you have a earlier version of this it isn't work.
Second, You sould need to create a new PST file whit the Outlook Version 2003 or 2007, the file format must be on Unicode Format, no Outlook (97-2000) format, with this file format the import of calendar doesn't gonna be work.
Third, You now have a PST whit Outlook 2003 or 2007 Version, you need to manually put your events on the calendar, Why? Cause if you just move it on the new calendar it gonna create and old instance of the event not a new instance, That's why iTunes doesn´t sync the calendar.
I done all these and actually I can sync the calendar with my iphone.

Problem with IOS7.1 and zip file on Exchange 2003

After the update to IOS 7.1 an mail from Exchange 2003 mail server with a zip file.
the zip file cannot unzipped by any app.

There's a patch available for this problem.
Contact [email protected] or wait until next SP goes to GA.
Kumar
Niranjan Soni wrote:
>
Hi
I am facing few problems when i try to start my WLS 5.1 with Java 1.3
When i try to start my Weblogic Server from Start Menu it gives me following
error :--
The dynamic link library javai.dll could not be found in the specified path
D:\Weblogic\bin;;C:\WINNT\System32;C:\WINNT\System;C:\WINNT;d:\jdk1.3\jre\bi
n;
d:\Weblogic\bin;d:\Weblogic\bin;C:\WINNT\System32;C:\WINNT;d:\jdk1.3\bin;d:\
Weblogic\bin;
Also as per the installation document, it says to set java system path, java
system classpath,
Weblogic Classpath, weblogic.properties file, weblogic.policy file and
licenese.
Do i need to make above changes even if i decide to Start my Weblogic Server
from Start Menu
or as NT Service and not start it from Command line.
If i run WLS5.1 from Start Menu.. do i need to make any specific changes in
terms of path and classpath.
I read the installation doc but i got quite confused with that as i am new
to Weblogic...that's why i am posting the query over here.
There is another problem that i am facing..it not related to WLS Start
up......but it is of setting the
classpath from java command line argument...I am running on NT and when i
type in the following
java -classpath -v c:/Weblogic/classes/boot
it says "Unable to initial threads : Can not find class java/lang/thread"
i have set the java classpath in my Classpath Environment Variable.
Any help ??
Thanks to all
Niranjan

Legacy integration between Exchange 2003 and Exchange 2010

Dear Team,
we are using Microsoft Exchange 2003 & 2010 Server for Emails, now we have both servers are connected, we want to raise new Single incident request for doing this activity, we want disconnect 2003 server from 2010 server so accordingly need support,
we are ready to pay for this incident,
pls do the needful,
Thanks & regards
Anteshwar Bhosale

Hi Anteshwar,
If you want to remove Exchange 2003 from your coexistence environment, please perform the following procedure:
1. Move all mailboxes to an Exchange 2010 server in the organization.
2. Move all content from the public folder database on the legacy Exchange 2003 server to a public folder database on an Exchange 2010 server in the organization.
3. On Exchange 2003 servers, for each offline address book (OAB), move the generation process to an Exchange 2010 server.
4. Verify that Internet mail flow is configured to route through your Exchange 2010 transport servers.
5. Verify that all inbound protocol services (Microsoft Exchange ActiveSync, Microsoft Office Outlook Web App, Outlook Anywhere, POP3, IMAP4, Autodiscover service, and any other Exchange Web service) are configured for Exchange 2010.
If all above steps have been prepared, we can remove the last Exchange 2003 server from the Exchange 2010 organization from ADSIEdit. For detailed steps about this, please refer to:
https://technet.microsoft.com/en-us/library/gg576862(v=exchg.141).aspx
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

IPAD 2 attachment problem (mime) -exchange 2003

I 'm using exchange 2003 server with activesync support. The majority of the attachments sent to ipad
are not showing pdf, xls etc (I get only the mime icon). I tried using different mail format as suggested by apple html, rtf, plain still not working
Could you please advise if possible?
Kind regards
George

Before I realized it was working fine through 3G I completely re-setup my exchange email just in case. No luck there. Everything else (including laptops) are connecting to exchange via WiFi with no problem so I'm pretty confident the network itself is not the issue and am also confident that the iPad/iPhone exchange setup is correct. Obviously since it works 3G it must be right.

Exchange 2003 migrate to Exchange 2010 - single forest multiple domain. Active Sync problem

Hi All,
I have AD single forest and multiple domain. for example, the forest domain is jakarta.co.id, and the other domain is bali.co.id.
Exchange 2003 deployed in jakarta.co.id, User mail enabled in domain jakarta.co.id and bali.co.id.
Then, I upgrade to Exchange 2010 (deploy in jakarta.co.id) and move mailbox from Exchange 2003 to Exchange 2010.
All users in bali.co.id are able to access email from Owa, BlackBerry (BIS), Outlook, but cannot access from Android, Windows Phone. (Active-Sync).
I got error information generated from https://testconnectivity.microsoft.com, as following:
Attempting the FolderSync command on the Exchange ActiveSync session.
The test of the FolderSync command failed.
Tell me more about this issue and how to resolve it
Additional Details
Exchange ActiveSync returned an HTTP 500 response (Internal Server Error).
Active-Sync still not work even I check option "Include inheritable permissions from this object" in security tab.
any idea to fix this issue?
Thanks.
Endrik
Endrik | blog: itendrik.wordpress.com Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Hi Sathish,
We are planning to migrate Exchange 2003 to Exchange 2013, all user already in Exchange 2010 and Exchange 2003 was decommissioned
Event Viewer log as following:
Log Name: Application
Source: MSExchange ActiveSync
Date: 1/17/2014 10:00:48 PM
Event ID: 1008
Task Category: Requests
Level: Warning
Keywords: Classic
User: N/A
Computer: EXC2010.jakarta.co.id
Description:
An exception occurred and was handled by Exchange ActiveSync. This may have been caused by an outdated or corrupted Exchange ActiveSync device partnership. This can occur if a user tries to modify the same item from multiple computers. If this is the case,
Exchange ActiveSync will re-create the partnership with the device. Items will be updated at the next synchronization.
URL=/Microsoft-Server-ActiveSync/default.eas?Cmd=Sync&User=bali%5Csteveng&DeviceId=SAMSUNG123456789&DeviceType=SAMSUNGGTN7000
--- Exception start ---
Exception type: Microsoft.Exchange.AirSync.AirSyncPermanentException
Exception message: A null value was received for the NTSD security descriptor of container CN=ExchangeActiveSyncDevices,CN=Steven Gerrard,OU=IT,DC=bali,DC=co,DC=id.
Exception level: 0
HttpStatusCode: 500
AirSyncStatusCode: 110
XmlResponse:
This request does not contain a WBXML response.
Exception stack trace: at Microsoft.Exchange.AirSync.ADDeviceManager.SetActiveSyncDeviceContainerPermissions(ActiveSyncDevices container)
at Microsoft.Exchange.AirSync.ADDeviceManager.CreateActiveSyncDeviceContainer(Boolean retryIfFailed)
at Microsoft.Exchange.AirSync.ADDeviceManager.CreateActiveSyncDevice(GlobalInfo globalInfo, ExDateTime syncStorageCreationTime, Boolean retryIfFailed)
at Microsoft.Exchange.AirSync.ADDeviceManager.CreateActiveSyncDevice(GlobalInfo globalInfo, ExDateTime syncStorageCreationTime)
at Microsoft.Exchange.AirSync.Command.UpdateADDevice(GlobalInfo globalInfo)
at Microsoft.Exchange.AirSync.Command.CompleteDeviceAccessProcessing()
at Microsoft.Exchange.AirSync.Command.WorkerThread()
--- Exception end ---.
I think KB817379 is not related because Exchange 2003 was decommissioned.
Regards,
Endrik
Endrik | blog: itendrik.wordpress.com Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Vista Biz \ DTM 4.7 \ Bold \ Outlook 2007 and Exchange 2003 Nightmare! Help Please

Hi
I am trying to sync my Exchange Pub Folder (Calendar and Contacts) to my BB 9000 and it fails when I select 'MAP' in the DTM sync process.
Vista Biz
DTM 4.7
Outlook 2007
Exchange 2003
Bold
I am local\admin perms and Owner perms on the Exchange \pub folders but it crashes as soon as I select the MAP button.
On my WinXP Pro, using Outlook 2003 and the same exchange it works out of the box, but with Vista and Outlook 07 it crashes. Has anyone experienced this?
Thanks
Karl

It would appear that at least in certain situations Exchange 2003 can't "understand" what Outlook 2007 pushes into the mail store, which is an issue when anything tries to connect via POP or IMAP as the server tries to "render" an Internet standard message, and fails.
Some info here, particularly the bit by Buddha377
http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/c63b871 3-9ef9-4076-a11b-5db08255689b
Sounds like your iPhone sync may be suffering the same way??
P.S. Simply reading a message with OWA can "repair" email messages, I've witness this myself seeing Mail.app show "garbage" for a certain message pulled via IMAP, OWA showing the message fine, then all of a sudden Mail.app showing a perfectly formed message.

HELP! Exchange 2003 Portlet Integration Problems

Similar Messages

Maybe you are looking for