Help! Existing .aif changes tempo in Logic

Newbie here. Your help is much appreciated.
I have an .aif that does not contain any tempo info. When I drag it into Logic, it plays back at a much higher tempo. Changing the tempo of the song doesn't change how the .aif plays.
Stumped!

It's a differenct sample rate than your project.
Open the Audio window and change the sample rate under the file menu (I think, away from the station right now) to match the sample rate of your project.

Similar Messages

When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?

When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?

first, you just asked me to use MS file Explorer to see what the properties were.,..and to ask what happened. Yes - that's on my hard drive. The problem I have is opening word files in a DB that is web enabled.....I've used Firefox browser for that, and everything else , for years...... When I look at the Tools, and options on FireFox., as your support page noted.....NOTHING is listed in the Applications tab....hence my note asking for help. The file I need to open is a Word file out on a web enabled DB. It's not on my hard drive - I have to problems opening docs there - but for that, I don't use Firefox

What action dom i take for this error message "C:\DOCUME~1\user\LOCALS~1\Temp\physics.pdf could not be opened, because the associated helper application does not exist. Change the association in your preferences"?

I get this message when I try to download a pdf file from a website.
"C:\DOCUME~1\user\LOCALS~1\Temp\physics.pdf could not be opened, because the associated helper application does not exist. Change the association in your preferences."
This is a new error. There used to be no problem.

Do you have any setting for MP3 in Tools > Options > Applications ?
You usually need the QuickTime plugin to play MP3 files on Windows because that is the only plugin that supports that file extension if there is no MIME type specified to play the file with another plugin like Windows Media Player or RealPlayer.

Preview PDF in FF and I getpdf could not be opened, because the associated helper application does not exist. Change the association in your preferences.

pdf could not be opened, because the associated helper application does not exist. Change the association in your preferences. This is what I get when I preview a PDF fillable form in FF. It loads Ok w/Explorer. It is a new site being developed so there is no url. My software tech says it is a FF problem

See http://kb.mozillazine.org/The_associated_helper_application_does_not_exist

HELP: Audio regions get out of sync when I change tempo

I've got Logic Pro 9. I've recorded audio on a few tracks, and they sound great together. When I go to change tempo (either in the transport bar or in the tempo track), the regions change in size and move around horizontally, and get out of sync as a result.
Has anyone had this problem? Why should changing the tempo of the project affect the position of the audio regions IN RELATION TO ONE ANOTHER? I want them to stay in sync after changing tempo.
Thanks in advance!

The reason they move is that logic is a bar/beat based Sequencer rather than a time based sequencer like pro tools. The regions adhere to the tempo grid and when the tempo is changed, they seemingly lengthen or shorten because the tempo shifts the bar/beat grid with respect to time--and audio regions normally Are inflexible and last for a fixed amount of time no matter what the tempo is changed to. This is an advantage when your audio is quantized musical events, but for non musical events it's a disaster because it screws up your edits.
To fix the problem, find the timelock key command and highlight all regions you don't want the tempo change to affect. after selecting them all, timelock them with this command.
But, from your post Im guessing that you have bigger problems than this....Timelocking regions will only prevent region starts from shifting around and will leave all your edits unchanged. but it won't speed or slow down your audio; It will not alter lengths to fit a new tempo. if your tracks are music tracks in a certain tempo and you are trying to change the tempo of your recorded audio, you must enable the flex mode on each track. For this you should read the part of the manual on the flex engine. Bear in mind that the audio quality of this ranges from ok to terrible depending on the material.
The moral of the story is that you should try to arrive at the correct tempo before recording audio tracks.

Is it possible to assign MIDI control to change tempo?

I would like to be able to change tempo (say, from 120 to 180 bpm) by using a fader from a MIDI keyboard (Edirol PCR-30). I can assign MIDI commands to Logic's buttons, volume, pan... but I can't figure how to do it with tempo. Any help would be appreciated.

Environment-->New-->Fader-->Specials-->Tempo Control
You get a fader which you can then assign a MIDI control command to.
I've heard somewhere that this is really buggy in recent years so use at your own risk, but at least in theory that's how you do it.
-Dan
G5 2.3 Mac OS X (10.4.5) RME Digiface

Workaround for changing tempos in a song

Mr. Drosser wrote, about changing tempo in a song:
"You don't need to go to a different program. I did this once for a song with a slow ending, "New York New York" type: Save a copy of the fast portion of your song, lower the tempo in the copy and do everything you want to do, then mix down every track separately (you can do that "by hand" or using the track locking function), import the audio files into your original song. Of course the bar separators don't have meaning any more, but here you go with your slow part. You can still mix the tracks individually, add effects etc. And of course you only have to do that with the tracks that are tempo dependent, i.e. midi tracks and audio loops. You can do things like vocals on the whole song in one run."
"I'm aware this is only a workaround - especially continuous tempo changes are impossible that way. That's why we added variable tempo on the master track to the "wishlist"."
At the time Mr. Drosser made this reply, I did not have time to study what he said. I now think that he says to do the fast part, which is the chorus in my song, and then make a copy of that and change the tempo so that it meets my needs for slowness, then enter the notes and loops for the slow part, and then have GB render this slow part to audio. I would use the track locking function to do this, I think. I then put the audio tracks, Real tracks, into the song, along with the fast stuff. I then sing the words for the whole song, fast and slow, in one wallop and there you are! There I am!
Have I got it right, Mr. Drosser? Please correct me as needed.
Since my fast part, the chorus, is almost the same every time, I would rather like to first do the slow part and then make a copy of that, change the tempo to faster, and proceed. That would work, would it not? Does it really make any difference in efficiency as to which you do first, the slow or the fast?
And, as I said to HangTime, since this is the month of the Great Pumpkin, Gourd bless you!

Yes, I actually do mean export to iTunes, that is the only way to get audio out of GB (well, using GB anyway).
I can think of several ways to attack this, none are particularly pretty, but if I were using loops and such I imagine the steps I'd take would be something along the lines of (and I'm going to make up numbers for more of a concrete example, though these are just out of thin air):
1) Create a song at 140 BPM. Create all my parts that were at 140
2) Create a song at 96 (or duplicate my old one, etc) and create all my slow parts.
3a) I'd use the Cycle function, wrap it around each part in my slow song one at a time and Export to iTunes (I believe you said all the slow parts were the same, so you wouldn't need the Cycle part for this, justr export the single slow part. But if there were variations that's how I'd do it)
3b) I'd find those AIFFs I exported and rename them to something meaningful (Chorus1, Chorus2, Bridge...)
4a) I would do the same thing with all the fast parts (Cycle around each section and export)
4b) Same as 3b for these parts
5) Now what I have on my hard drive (and in iTunes, but this is unimportant) are a series of AIFF files which we can pretend are loops that we want to peice together. If your song was:
Verse1, Chorus1, Verse2, Chorus1, verse3, Bridge, chorus2, verse4, chours1
You'd then drag those parts, into yet a third GB project file, in that order, dropping them into a New Basic track.
6) create another New Basic Track and add your vocals.
Like I said, not pretty, but I can think of an uglier way to do it, so it's not the worst possible method.
hope that made sense.
I will not only keep my hands above the table
Good idea, I jsut opened a project file in which 8 tracks are missing (and they are gone). I'm notamused, and I'm stymied. I was sure I knew all the causes of this. Thankfully this was just a scratch take, AND I had locked all 8 drum tracks, so they still play, but the original recordings no longer exist.
I will smile when I say that.
What the heck... Barkeep, back that man up, and leave the bottle
--HangTime [Will Compute for a wee bit of Jameson] B-)>

Downloaded loops not changing tempo with the project.

I have all sorts of loops that I've downloaded in various formats.....wav, aiff, caf, etc. With many of these, when I insert them into a project, the loop retains its original tempo instead of stretching or shrinking to match the tempo of the project. Is there a way to convert these loops or change a setting somewhere that will cause them to change tempo as the tempo of the project changes?

Hi, Just Re-record the loop to any empty track, and Voila....Now it will follw tempo change.
Logic only recognizes material recorded in the session or apple loops...so just re-record any imported material and it will follow your tempo and pitch change.

Help required: Splitting up complex script logic via *LOGIC_BY

Hello experts,
I have a very long and complex logic which I am trying to split up into different sections. I am using *LOGIC_BY within the default logic whereas the ACCOUNT dimension is my trigger. Hence I have created a new property called "LOGIC" for every base level account.
I am using BPC MS 7.0 (release 7.0.110)
Simple example to explain:
ACCOUNT description - LOGIC property
PRICE1 - LOGIC_DEMAND
PRICE2 - LOGIC_DEMAND
AMOUNT1 - LOGIC_DEMAND
AMOUNT2 - LOGIC_DEMAND
REVENUE1 - LOGIC_DUMMY (is calculated via LOGIC_DEMAND by =PRICE1 * AMOUNT1)
REVENUE2 - LOGIC_DUMMY (is calculated via LOGIC_DEMAND by =PRICE2 * AMOUNT2)
REVENUE_PL - LOGIC_DUMMY (is calculated via LOGIC_DEMAND by =REVENUE1 + REVENUE2)
Default logic (default.lgf) just contains the following:
*LOGIC_MODE = 2
*LOGIC_BY = ACCOUNT
Data entry:
PRICE1 = 10
PRICE2 = 20
AMOUNT1 = 10
AMOUNT2 = 20
REVENUE1 (to be calculated/expected) = 100
REVENUE2 (to be calculated/expected) = 400
REVENUE_PL (to be calculated/expected) = 500
Result:
As I am sending data, all revenue accounts are calculated to ZERO.
If I change my default logic manually to
*INCLUDE LOGIC_DEMAND
then everything works. REVENUE1 and REVENUE2 are calculated to 100 / 400, and REVENUE_PL is 500.
What did I do wrong? Can anybody help? If there is someone who can post a short example, I would be very grateful.
Best regards,
Stefan

Hi BI,
hmm i guess there is no tools to debug line by line is SAP BPC.. guys is there any third party software that can do this??
Thanks, hope helps

Customer PC3000 does not exist (please change entry in plant 3000)-INT STO

Hi All,
Iam getting error message while creating intercompany sto PO in my QA clinet.
(Customer PC3000 does not exist (please change entry in plant 3000)
Vendor maintained both the plant(supply and receeving plant)
Customer maintained both the company code and sales org.(supply and receeving plant) then also Iam getting same error.
I had checked OMGN t-code setting looks good.
Same setting I had tested on DEV and SANDBOX its wokring fine.
Please help me out how to solve this problem
Thanks
Raj K

Hi,
I am facing similar problem, When trying to create a PO for Intercompany stock transfer, I am getting the error message Customer XXX does not exist (Please change the entry in Plant XXXX).
This error is appearing only in the Production system, but PO is getting created in Quality system. All the Master data, Configuration in both systems appears same. If you know any solution, kindly post.
Regards,
Onkar

How to change language in Logic Studio?

My MacBook is Mac OS X 10.5.6, the system language is Traditional Chinese,
I want to fill English in my Logic Studio, even though I choose the English when filling software,
Logic Studio still run Simplified Chinese,
How to change language for Logic Studio,
May I have any master help me, Please.
Thank you.

Try this.
Quit Logic
Open System Preferences
Click International
Click Language tab
Drag English to top of list
Quit Sys Pref
Open Logic
JG

Need help On Triggers/Change pointers in SAP

Hi Experts,
I Need help On Triggers/Change pointers in SAP.
I have a requirement as soon as an entry is created in one of the Standard SAP table it should check against my Ztable and update and create the corresponding entry in another Ztable.
Can some one help me out on this with the syntax and how to do it

Hi,
Check whether you have any enhancement option (BADI, user exit, Customer enhancement etc) in the program which is used to save the data in the SAP standard table. If so, then try to write your code in that appropriate enhancement.

What's happening when I change tempo?

I have some audio tracks that have been chopped into regions. The regions are butted up to one another. They are pieces from different tracks that have been put together.
I noticed that if I change the tempo in the transport window, I end up either with space added between the regions or the regions end up overlapping. It seems to have no affect on other audio tracks that are have only one region although not sure.
What is happening here and why? Is there some setting that would prevent this? I don't remember this happening on previous projects.

Only certain types of files are automatically time stretched when changing tempo..
Depending on what files you've imporrted/recorded determines this.
Don't be offended when someone mentions read the manual, this is a user forum where everyone gives of their free time. There are those that come here who think they are entitled to information without doing any work... (at all... period.) I think many that post here get tired of being used in that manner. Not saying that you've done that but the "new standard" is not reading the manual.
pancenter-

Ho to change the old Logical System in the new Client?

Hi All,
after a Client copy, I've to change the old Logical System in all the relevant SAP tables in the new client.
In the Co tables too, such as CSKS.
Could anyone tell me hoq to do it?
Thanks
G.Rossi

Hi,
So the only solution would be to rename the SID of one portal.-> Yes,Rename the SID of on portal
Can this be done ? -> Yes,It can be done
How is it done ? -> Use Export/Import method.Export the database of one SID. Import the same with different SID.
Thanks and Regards,

How to get the number of page which exists the change bar ?

In FDK development, I want to find the number of page which exists the change bar.

zhaopeng,
You can get the page number by querying the FP_PageNum property of the FO_Page object:
pageNum = F_ApiGetInt(docId, pageId, FP_PageNum);
...or you can use FP_PageNumString if you are using string page numbers.
If you do not have the ID of the FO_Page object, you can get it from the paragraph ID using the following function, courtesy of Rick Quatro, posted to the Yahoo Framedev list. Send the paragraph (FO_Pgf) ID as oObj and it will return the page ID:
F_ObjHandleT GetPage(F_ObjHandleT oDoc, F_ObjHandleT oObj)
F_ObjHandleT oFrame = 0;
IntT iObjType;
F_ObjHandleT oRow, oCell;
while(oObj)
oFrame = oObj;
iObjType = F_ApiGetObjectType(oDoc, oObj);
switch(iObjType){
case FO_SubCol:
oObj = F_ApiGetId(oDoc, oObj, FP_ParentTextFrame);
break;
case FO_Tbl:
oRow = F_ApiGetId(oDoc, oObj, FP_FirstRowInTbl);
oCell = F_ApiGetId(oDoc, oRow, FP_FirstCellInRow);
oObj = oCell;
break;
case FO_Row:
oCell = F_ApiGetId(oDoc, oObj, FP_FirstCellInRow);
oObj = oCell;
break;
case FO_Cell:
// handle FO_Pgf case
case FO_Pgf:
// handle FO_AFrame case
case FO_AFrame:
oObj = F_ApiGetId(oDoc, oObj, FP_InTextFrame);
break;
// handle graphic object cases
case FO_TextLine:
case FO_TextFrame:
case FO_UnanchoredFrame:
case FO_Arc:
case FO_Ellipse:
case FO_Group:
case FO_Inset:
case FO_Line:
case FO_Math:
case FO_Polygon:
case FO_Polyline:
case FO_Rectangle:
case FO_RoundRect:
oObj = F_ApiGetId(oDoc, oObj, FP_FrameParent);
break;
default:
// prevents loop if unknown object type is found.
oObj = 0;
break;
if(oFrame){
// Use FP_PageFramePage to get the page identifier of the object.
return (F_ApiGetId(oDoc, oFrame, FP_PageFramePage));
else
return(0);
Russ

Help! Existing .aif changes tempo in Logic

Similar Messages

Maybe you are looking for