Help - failed to respond - ichat os 10.4.7

i just bought 3 new macbooks. 1 for my fiance, 1 for myself, and 1 for my inlaws as i am moving out of state in two weeks.
i have an OLD g4 cube and an old ibook with an external, firewire isight camera. when i use both the ibook (wireless) and the cube (direct ethernet connection to my comcast cable modem) i am able to ichat with my sister who is in nyc.
when i first bought the 1st macbook i brought it home and successfully connected with my sister, in her apartment, and video-conferenced.
i then bought the 2 macbooks, set them up at my fiances house. 1 was hard-wired to their ethernet connection, the other was working wirelessly. we were able to connect and ichat in their house.
my fiance brought her computer to my house last night, we upgraded her and my OS to OS 10.4.7.
she went home, we connected via our wireless chats ONE time ... then when we tried later - we each got the "failed to respond b.c XXXX did not reply" (each got it on our own computer for our own names)
i was able to connect my macbook to my ethernet and ichat with the computer that was hard-wired at her house, but once i removed my hard-wire connection at my house, i lost the connection immediately
i then took out my isight and cube and connected to my parents computer again, i also used my ibook laptop and connected with the isight again ... when i tried to use the new macbook - failed to respond again and again and again
please - i'm so frustrated - can anyone help after that verbose explaination of my problem
macbook Mac OS X (10.4.6) now on max os x (10.4.7)

Hi bginz,
Welcome to the Apple Discussions
Ok it is a bit like this.
iChat reads the Connection speed via a setting in System Preferences for Quicktime.
WHen a computer is started up for the first time the full Bandwidth is passed to iChat
In subsquent iChat/computer start ups the Quicktime setting is used.
If this is set to Automatic it returns a 0 to iChat and caps the Bandwidth.
Go to System Preferences > QUicktime > Streaming tab and set the drop down to match your download speed.
If your connection is fatser than 1.5meg then use the 1.5meg setting.
Some of your problem may be related to the routing set up you have on your LAN.
Hw are you set up with regard to IP issuing from your modem ?
Is it using DHCP or have you set up Static routing ?
IS there any other routing device involved ?
This will lead to how have you opened the ports to allow different computers to use the iChat ports ?
Can you confirm that the initial connections are form the AIM Buddy List and not the Bonjour one ?
2:11 PM Thursday; June 29, 2006

Similar Messages

IChat v Skype - 'fail to respond' etc

I have been using Skype on my Mac for a long time, and recently decided to try out iChat AV with friends living overseas. They have Macs too.
I find iChat has superior audio capabilities but it has serious problems with such issues as 'user failed to respond' or 'insufficient bandwidth'. These are problems that occur like 70% of the time and I know it is not a matter of router settings as I could sometimes get iChat to work just great. I have checked out all the postings in this forum regarding these issues and tried all the fixes but still get these problems. They do not happen all the time. Only sometimes! By the way, I am using ADSL 1500 Mbs as are my friends and I know speed/bandwidth are more than sufficient.
So, now its back to good old Skype (never had connection problems from day one). Even Gizmo is good too. Apple seriously needs to work on these issues real quick. They need to learn from Skype.

Help for iChat AV 3 Problems

"Failed to respond" message on iChat

Hello, i thought posting my problems in this board was more appropriate than iSight.
I am unable to connect video chat with a PC user (with AIM 5.9) via iChat AV 3.0.1. I can connect to the test appleu3test01 user for video chat but not my PC friend. I continue to ge tthe "Failed to respond" error message.
please help! i've tried to read the step by step pages on instructions but it seems i've tried to eliminate plists and reset port numbers but nothing is working.

Hi Ives,
If the PC user is on XP and has Service PAck 2 installed they mey need to Enable AIM thorugh the XP firewall
http://www.ralphjohnsuk.dsl.pipex.com/page12.html See the bottom of the two yellow boxes.
They may also need the exrta Video file and Tune their Camera and Mic to the appliction Both of these have links in the top yellow box (the "here" link and the Bold Tuning Link justs after)
Ralph

I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch. All other components work normally. In Activity monitor it says Adobe switchboard failed to respond. Can anyone help solve this issue?

I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch. All other components work normally. In Activity monitor it says Adobe switchboard failed to respond. Can anyone help solve this issue?

Release: 4/25/2012
http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx

Ichat user failed to respond

hi, i've been trying to video chat with people using ichat for somet ime now, every time i try to do it though, it just says "user failed to respond". i am using an AIM screen name, and so is the person i am trying to chat with. both of us are using mac book pros

Hello... I am also having the "error-8" ichat video problem.
Date/Time: 2007-10-01 17:20:31.899 -0400
OS Version: 10.4.10 (Build 8R2232)
Report Version: 4
iChat Connection Log:
AVChat started with ID 1586007614.
heavenlylr1: State change from AVChatNoState to AVChatStateWaiting.
0x154f7470: State change from AVChatNoState to AVChatStateInvited.
0x154f7470: State change from AVChatStateInvited to AVChatStateConnecting.
heavenlylr1: State change from AVChatStateWaiting to AVChatStateConnecting.
heavenlylr1: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
0x154f7470: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
Video Conference Error Report:
Video Conference Support Report:
Video Conference User Report:
I have called my windstream provider and have shut off the firewalls to my internet and have checked for firewalls on my computer, which were all off. My boyfriend and live very far apart and bought these computers mostly for this reason. I called Apple, and they had no answers for me. I am able to video chat with another macbook in my house, but not with anyone else. PLEASE tell me you have answers
Thank you

IChat AV 2.1 - Failed to Respond (NOT Tiger AV 3 version)

Hi all - have been iChatting with my sister for a long time without too many problems. All of a sudden (since a couple of days) we can no longer connect to each other. Both on Mac 10.3.9/AV 2.1 - both with sufficient broadband speeds - both with the proper ports open. We've had no changes in system. Tried from G5 to G5; from iBook to PowerBook, from G5 to laptop, nothing works. Starting up iChat no problem, inviting for video chat no problem, screen says "Starting video chat" and then it either "hangs" or gives the message "user failed to respond". Connection Doctor message is: xx did not respond. Tried to send UDP SIP "invite" to the following IP addresses and ports: xxxx:5060, xxxx:5060.
All related topics I checked here seem to deal with Tiger's version iChat AV 3, but we have the problem in iChat AV 2.1. Would anyone be able to give us some tips and hints? Other than bad connections (sound/video) from time to time, everything worked just fine. Thanks much!

Hello Snobble
All of a sudden (since a couple of days) ...
If the problem occurred only after the recent Security updates, I suggest you download and reapply the Security Update 2005-007 (Mac OS X 10.3.9 Client). You may have had a bad download or install.
Repair permissions
b before AND after
the update. See Gulliver's Mac OS X 10.3/10.4: System maintenance FAQ for why.
If that does not get iChat AV working again, try the suggestions in the How Can I get iChat working again? FAQ.

User failed to respond

Okay so I have tried with a bunch of different people but I can't get video chat to work I keep getting the message that I failed to respond. I was able to user one of the appletest01 accounts and connected just fine but not to any real person. I have all my ports setup per ichat help guides and had a friend do the same for his but we couldn't connect.
Anyone know something we can try to get around this problem?

Date/Time: 2006-11-22 19:48:14.783 -0800
OS Version: 10.4.8 (Build 8L2127)
Report Version: 4
iChat Connection Log:
AVChat started with ID 2439286152.
0x17ad7ae0: State change from AVChatNoState to AVChatStateWaiting.
jtking516: State change from AVChatNoState to AVChatStateInvited.
0x17ad7ae0: State change from AVChatStateWaiting to AVChatStateConnecting.
jtking516: State change from AVChatStateInvited to AVChatStateConnecting.
0x17ad7ae0: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
jtking516: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
Video Conference Error Report:
@:0 type=4 (00000000/22)
[VCSIP_INVITEERROR]
[19]
@SIP/SIP.c:2437 type=4 (900A0015/22)
[SIPConnectIPPort failed]
Video Conference Support Report:
@:0 type=2 (00000000/2)
[VCUSE_INTERNALISIGHT]
[25]
@SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.33;branch=z9hG4bK284ffb0574c4d6be
Max-Forwards: 70
To: "u0" <sip:[email protected]>
From: "jtking516" <sip:[email protected]>;tag=1823807539
Call-ID: 6fa48500-7aa5-11db-94a0-b8faff0413c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 474
v=0
o=jtking 0 0 IN IP4 192.168.1.33
s=jtking516
c=IN IP4 192.168.1.33
b=AS:2147483647
t=0 0
a=hwi:1056:2:2160
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:831972697
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:20
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 20:640:480:640:480
a=rtpID:1434778404
@SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.33;branch=z9hG4bK284ffb0574c4d6be
Max-Forwards: 70
To: "u0" <sip:[email protected]>
From: "jtking516" <sip:[email protected]>;tag=1823807539
Call-ID: 6fa48500-7aa5-11db-94a0-b8faff0413c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 474
v=0
o=jtking 0 0 IN IP4 192.168.1.33
s=jtking516
c=IN IP4 192.168.1.33
b=AS:2147483647
t=0 0
a=hwi:1056:2:2160
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:831972697
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:20
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 20:640:480:640:480
a=rtpID:1434778404
@SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.33;branch=z9hG4bK284ffb0574c4d6be
Max-Forwards: 70
To: "u0" <sip:[email protected]>
From: "jtking516" <sip:[email protected]>;tag=1823807539
Call-ID: 6fa48500-7aa5-11db-94a0-b8faff0413c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 474
v=0
o=jtking 0 0 IN IP4 192.168.1.33
s=jtking516
c=IN IP4 192.168.1.33
b=AS:2147483647
t=0 0
a=hwi:1056:2:2160
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:831972697
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:20
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 20:640:480:640:480
a=rtpID:1434778404
@:0 type=2 (00000000/22)
[VCVIDEO_OUTGOINGATTEMPT]
[4]
@:0 type=2 (00000000/2)
[VCUSE_INTERNALISIGHT]
[25]
Video Conference User Report:
Binary Images Description for "iChat":
0x1000 - 0x17cfff com.apple.iChat 3.1.5 (440) /Applications/iChat.app/Contents/MacOS/iChat

Failed to respond message

Hi i am having problems when using ichat. When someone tries to connect to me and i click accept, they get message that i declined them, whilst i get message that i failed to respond. Am using BT VOYAGER 2000 wireless adsl modem with airport.....can anyone help please......thanks
....same problem when i try to connect with them, will not connect.

Hi interscott1,
Welcome To The Apple Discussion Pages.
This page Says the BT 2000 has UPnP. Turn this On and delete any settings for Port Forwarding you have done.
With the Airport Log on to it with the Aiport Admin Utility (In Applications/Utilities).
Go to the Network tab.
Deselect the Distribute Addresses option.
This will trun it in to a Wireless Access point and all the computers will then get their IP from the BT 2000.
Lasly make sure that System Preferences > Quicktime > Streaming tab has the drop down set to match your download speed or a max of 1.5meg. AND iChat > Preferences > Video section > Bandwidth Limit drop down is set to NONE.
Now you should be good to go.
11:07 PM Sunday; May 21, 2006

"Failed to Respond" victims try this v.2

A while ago I experienced a troublesome "Failed to Respond" error and found a solution/workaround - here is that thread:
http://discussions.apple.com/message.jspa?messageID=1023629#1023629
I recently tried to chat after a prolonged period of time and was met by my old nemesis, "Failed to Respond". After reading countless posts and changing numerous settings on my router, iBook and then my hardwired G4 I was running out of ideas.
I only chat with my folks and they said nothing had changed on their end however for the sake of troubleshooting I had my dad bypass his router and plug directly into the cable modem - it worked like a champ!
True, I do not know what is causing the problem on his end but the workaround is successful. So add this one to your arsenal of troubleshooting tips and it may pay off.

Kevin,
I have a Netgear WGR614 v6. and the following minor tweak works for me:
1. Open the Netgear SmartWizard router manager in your browser
2. In the Advanced menu select 'Port Forwarding/Port Triggering'
3. Select service type by clicking on the 'Port Forwarding' button
4. In the 'Service Name' pull down menu select: AIM
The following should already be entered in the table: Service #1: Service Name: AIM, Start Port: 5190, End Port: 5190, Server IP Address: Your Server IP Address: e.g. 192.168.1.2
Click on the 'Add Custom Service' button and input the following:
5. Service #2: Service Name: ichat 1, Start Port: 5060, End Port: 5060, Server IP Address: Your Server IP Address: e.g. 192.168.1.2
6. Service #3: Service Name: ichat 2, Start Port:16384, End Port: 16403, Server IP Address: Your Server IP Address: e.g. 192.168.1.2
Hope this helps,
Ed

Unable to chat "because user failed to respond"

I and my family are having trouble using iChat AV for video chat. The problem also affects audio chat.
Essentially, when person A invites person B to chat, and person B accepts, there is a delay with the spinning indicator (which always pauses momentairly in this process) and then person B sees an error message saying that person A "failed to respond". Messaging works fine.
My father experienced this issue first, unable to connect to my brother. However, I was able to connect to both of them. Recently, I was invited to download an iSight Updater, and since this the problem now affects me.
My father uses iChat AV v3.1.6 (v441) on OS 10.4.8 on a G5 iMac
I use iChat AV 2.1 (v153) on OS 10.3.9 on a G4 iMac
I believe my brother also uses OS 10.3.x
Can anyone provide any assistance as this problem is getting us down! Thanks!
iMac G4 Flat Mac OS X (10.3.9)

Hi Perseverance,
This info suggests that ports for iChat are not open somewhere such as the Mac Firewall or the modem.
4:24 PM Wednesday; January 24, 2007

Disk Utility: Burn error: 0x80020022 The device failed to respond...

I've been working on archiving a ton of video to DVD. I'm using Dual-Layer discs to minimize the amount of physical storage space needed for the finished project. I burned several discs in iDVD in July and regularly received errors. Then the drive suddenly stopped loading any type of media. Anything I inserted would spin briefly and then eject. Repaired permissions and followed steps outlined here and here. Took the Mac back to the store where I bought it (sadly, not an Apple Store - nearest one is 12 hrs away) where naturally it performed flawlessly for the store rep.
So I took it home and resumed burning, now saving as a disc image (ignoring iDVD's warning about the performance of DVDs burned this way) and using Disk Utility, since iDVD didn't seem to be reliable. Burned about 25 discs, error-free, in this fashion, then three days ago, got the error: "Unable to burn “Disc 19.img”. (The device failed to respond properly, unable to recover or retry.)"
Retried the same image, and it worked. Then burned two more in the same fashion with no errors. Today I got the same error again. Logs are identical for each failed burn, except for the time span between certain lines.
Price of DL media being what it is, I'd hate to keep ruining discs if there's something I can do to avoid it. I suppose it could be bad media, but it seems odd that I'd get two bum discs that close together after burning so many without issue. Checked the site and the forums, and there doesn't seem to be any answers. Does anyone have any ideas? (Other than "try a different brand of media." I've got a buttload of these discs and it's too late to return them now.) Even if it just helps determine where the issue lies. Warranty will be up soon, so if it's hardware related, I need to get it taken care of quick.
Media: Philips DVD+R DL 8x
*Drive info:*
HL-DT-ST DVDRW GS21N:
Firmware Revision: SA15
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds
DiscUtility.log:
2009-10-03 08:54:01 -0600: Burning Image “Disc 22.img”
2009-10-03 08:55:15 -0600: Image name: “Disc 22.img”
2009-10-03 08:55:15 -0600: Burn disc in: “HL-DT-ST DVDRW GS21N”
2009-10-03 08:55:15 -0600: Erase disc before burning: No
2009-10-03 08:55:15 -0600: Leave disc appendable: No
2009-10-03 08:55:15 -0600: Verify burned data after burning: Yes
2009-10-03 08:55:15 -0600: Eject disc after burning
2009-10-03 08:55:15 -0600:
2009-10-03 08:55:15 -0600: Preparing data for burn
2009-10-03 08:56:30 -0600: Opening session
2009-10-03 08:56:35 -0600: Opening track
2009-10-03 08:56:35 -0600: Writing track
2009-10-03 09:01:37 -0600: Finishing burn
2009-10-03 09:02:37 -0600: Closing session
2009-10-03 09:02:38 -0600: Finishing burn
2009-10-03 09:38:37 -0600: Burn failed
2009-10-03 09:38:37 -0600: The device failed to respond properly, unable to recover or retry.
2009-10-03 09:38:37 -0600: Additional information can be found in the ~/Library/Logs/DiscRecording.log log file.
2009-10-03 09:38:37 -0600: Unable to burn “Disc 22.img”. (The device failed to respond properly, unable to recover or retry.)
DiscRecording.log:
Disk Utility: Burn started, Sat Oct 3 08:55:15 2009
Disk Utility: Burning to DVD+R DL (CMC MAG D03) media with DAO strategy in HL-DT-ST DVDRW GS21N SA15 via ATAPI.
Disk Utility: Requested burn speed was 47x, actual burn speed is 4x.
Disk Utility: Burn failed, Sat Oct 3 09:37:15 2009
Disk Utility: Burn sense: 4/44/90 Hardware Error,
Disk Utility: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
Message was edited by: Weasel42

I have encountered the same problem. I have a Mac Book Pro from 2007, and it has gone through 3 DVD writers so far, all of which have ruined DVD+R DL disks. I have occasionally been able to burn one, but usually during verify, I get this error message:
Communication to the disk drive failed: 0x8002022
And disk utility fails with a "Invalid B-tree node size" error
Oddly, when I try to burn a disk near capacity (6.5Gb or more) it is more likely to fail than if I burn a smaller disk.
I've been using Memorex DVD+R DL disks, but I have used other brands in the past but they have failed, too. Out of about 50 disks so far, I have had success with about 5.

"The attempt to burn a disc failed. The device failed to respond properly"

Hello everyone,
I have suddenly developed a problem when trying to burn a CD. I get the "Checking playlist" and "Initializing" messages, and then Writing...(the name of the first track)", but about 20 seconds later, just when seems as if it will start burning, the CD is ejected and I get the following message: ""The attempt to burn a disc failed. The device failed to respond properly, unable to recover or retry."
I have browsed the forums here and it seems that many other people have had similar problems. I am running a Powerbook G4, OS X version 10.2.8, iTunes 6.0.5.
I have used several different brands of media, and many slower burning speeds, but nothing helps.
I can still listen to CD's with my computer, just not burn anything.
My computer is about 5 years old. Do you think that this problem is suddenly occurring simply because my optical drive needs to be replaced?
Also, another issue, possibly related, but maybe not, is that, after my burn failed for the first time, I put in a completely different CD to see if it would play. It did, but instead of listing the correct tracks on the CD, it showed the tracks of the previous playlist that had the failed burn.
For example, I imported the tracks from one CD into my Library, then moved them to a playlist. When I tried to burn the contents of that playlist to a CD, I received the "attempt to burn failed" message that I previously described.
Then, I inserted a completely different disc, but iTunes read it as having the same contents of the playlist that had failed to burn, but when I clicked on the track titles, they played from the new CD that I'd inserted, not the failed playlist. So although the titles indicated that I was working with the failed playlist, the media that played was from the new CD.
Any suggestions would be greatly appreciated!
Sarah
Powerbook G4 Mac OS X (10.2.x)
Powerbook G4 Mac OS X (10.2.x)

I'm having a similar problem. In my case, the problem started about two months ago. I regularly update software. Currently I'm at 10.4.10 and iTunes 7.3.2(6).
In my case, I'm trying to backup recent iTunes purchases. I'm unable to burn CDs with the original combo drive (CD) or my internal NEC burner (DVDs). I get a series of coasters. Occasionally .Mac Backup fails as well. Toast 7 works fine. Even stranger, I can burn 1 DVD successfully with an external Pioneer DVD burner (4x) USB 2 using iTunes. (I have a belkin USB 2 card) Multiple DVDs fail. I recently switched to this PowerMac from an iBook and several preference files were copied with my home directory during the transition. The external drive was used with the iBook, but not on this system before which may lend to the preferences file as a possibility.
However, I find it odd that my external drive works and both internal drives are failing. I was suspecting the IDE controller on the logic board, except that Toast works. This logic board is not as old as the computer. It was a replacement in 2005 when an after market ATI card fried and took it and the power supply out. At first I suspected a hardware problem and replaced the IDE cable which looked warn. The NEC drive is about two years old and the combo drive is the original. They are on the same controller.
In my case it is certainly possible the drives or controller are starting to fail. I wonder if anyone else might have an external cd/dvd drive they could test that are having the problem.

Ix2 fails to respond, cannot get past login screen

I am having intermittent problems with my Iomega ix2 failing to respond. After some time being on the drive fails to respond. I cannot open any files through Windows explorer. If i attempt to connect using the web interface i cant get past the login screen. I put in my user name and password and hit enter. The page simply reloads the login screen. The only solution is to power the drive down using the button on the back of the unit. Powering it up it works fine. Eventually though this will happen again. It's happened a half dozen time or more in the last few days. Now I'm stuck out in the field and cannot access any files. Please help.

No. No errors in the event log of any kind other than the time sync error. I recently replaced one of the disks as it had failed. I receieved a warranty disk from Lenovo/Iomega about a month ago. i installed it and it rebuilt the RAID with no problems. This error has been happening since then. When the time sync error happens i get all kinds of strange behavior. SFTP, which is how I access the files, will start giving Goodsync 'cannt reach end of file error' type errors. Like I've mentioned before I also get an issue where the web login screen gets caught in a loop too. I type in the user name and the password, hit enter, and it just reloads the login screen again. Rebooting the device from the power button on the back is the only solution.

Insufficient bandwidth/failed to respond

I cant 1 on 1 video chat. most of the time when i invite there is a delay and then it says i failed to respond. on the other end it tells them that they failed to respond. occasionally it will say insufficient bandwidth.

Hi Shawn,
Can you tell us what your settings are in:
1) System Preferences > Quicktime > Streaming tab ?
2) iChat Preferences > Video section > Bandwidth Limit drop down ?
3) What your Mac Firewall settings for iChat are ?
4) What you modem Port settings are for iChat ?
5) Are you still on 10.4.2 or have you updated ?
Ralph

AV failure... "Failed to respond" error

Been suffering from this "failed to respond" error for attempted video connections for some time now. Never quite got a solution for it. I have a PB 12" and iMac mini routed at home through a Netgear WPN824 unit, and now adding a MacBook. We could AV chat at home b/n the Macs (no big deal) but just can't get a connection outside with my in-laws. We used to be able to do this successfully under an earlier version of 10.4.x, but this "failed to respond" error has plagued us for the last few 10.4.x OS versions.
I am just wondering if the Netgear router is an issue? Would a Linksys unit be the solution? Can anyone with a similar experience report whether the issue is somehow related to Netgear's implementation?
Thanks.

Hi Ralph,
Thanks for your comment.
Somehow I'm very curious about this "did not respond" problem.
Especially since it is a problem that occurs not concistently.
It seems that it works now and then (ichat av), and very often it works
stable for quite sometime. Then suddenly the "did not respond" issue is back again and nothing can be done to fix it. When you try later (without changing any settings) it is working like it should again. So I would call it non-repeatable.
The problems started when osx updated to 10.4. I know it is not an elegant solution but the effort is minimum and the previous os is stable under any circumstance. Any idea when Apple has a fix for this, it is an Apple software problem. Can imagine it would save guys like you lot's of time and brainpain.
Regards,
JPM
Hi Jan,
Welcome To The Apple Discussion Pages.
That is one solution. Normally it is for devices
like the Zyxels that for some reason does not like
iChat on port 5190 or for modems that Port Forward
AND specify Protocols leading to conflicts when port
5190 needs TCP and UDP.
As the original poster is connecting what looks like
three computers to the 'Net now he would be better
served by Port Triggering or UPnP.
As it is a Netgear it may need UpnP turned Off and On
twice before it works properly (Netgear quirk). If
he is using Port Triggering we will need to check the
setigs he has.
Defcom has Netgear DG834 variant that works. I have
a Linksys (Router) that works.
5:13 PM Saturday; June 3, 2006
MacBookPro 17", G5 quad, G3. Mac OS X (10.4.6) G5 Quad, G4 powerbook, G3 powerbook

Help - failed to respond - ichat os 10.4.7

Similar Messages

Maybe you are looking for