HELP! Fans speeding up and slow down

What is happening?
The fans on my Power Mac G5 are sppeding up for short periods of time and then they go back to low speed but it's happening almost every minute or so.
Any ideas?
Thank you in advance.
Ah! and I apologize for my english.

Check for dust buildup on the CPU cooling fins and fans. You can use a can of compressed air (the ones for electronics work well) to get some of the dust off. Just be careful to keep the cans upright, or else liquid can come out of them.
Otherwise, try setting the Processor Performance setting to 'Highest' in the Energy Saver preference pane. This will cause the fans to run at a higher speed, but their speed won't fluctuate as much.

Similar Messages

GE60 fan problem. speeds up and slows down constantly [EC reset done]

My model is GE60 OCN and bios and EC is the newest ones for win7 embeded on msi website.
I have the same problem with others if you search here 'ge60 fan'.
The temperature between 50~60℃ the fans runs slow and really quite.
But if the temperature goes down under about 46℃, it speed up and slows down constantly and it is annoying and much noiser.
I think msi should provide new EC firmware for this. Even the temperature is low, it annoys and nosier than when the temperature is between 50~60℃.
Please check this problem and provide new EC firmware for fan policy.
Someone has uploaded video link: youtube.com/watch?v=OQjjjVOpsEQ
this is exact problem with me as well.

I have exactly the same problem. Let's continue in the other thread (https://forum-en.msi.com/index.php?topic=165613.0)

On iMovie for iPad2, is it possible to speed up and slow down voices?

On iMovie for iPad2, is it possible to speed up and slow down voices? (in order to sound like a chipmunk for example) I know that it can be done on a Mac, but what about iPad?

It it possible to speed up or slow down music from my iTunes file?
http://www.bulletsandbones.com/GB/GBFAQ.html#changeimportedtempo
(Let the page FULLY load. The link to your answer is at the top of your screen)
cut
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsection
(Let the page FULLY load. The link to your answer is at the top of your screen)
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsectionnospace
(Let the page FULLY load. The link to your answer is at the top of your screen)
blend
open GB's help and search for "curve"
I am using music from my iTunes.
http://www.bulletsandbones.com/GB/GBFAQ.html#importfromitunes
(Let the page FULLY load. The link to your answer is at the top of your screen)

Speed up and slow down tracks

I need a program that I can speed up and slow down tracks with. Is that possible in Logic Express? I know that it can be done in Logic Pro, however I don't need quite that much program.

xcuse me if i jump in here without answering the original question, but that brings up something similar to me:
if i have a setup in the arrange with a combination of various audio-files, apple loops and midi-tracks, and i want to record something additional into that (midi over connected edirol midi-keyboard): can i slow down the whole song, just to make it easier to record the new part without destructively destroying anything?
and after that just go back to the original song-tempo?
thanx a bunch for any thoughts!
again, sorry balletboy for jumpin in here, hope that is ok for you :o)

Speed up and slow down music

Hi, I listen to a lot of lectures and I like to practice my karaoke, so it helps to be able to slow down the audio files. Windows Media Player 10 and 11 have this function built into the player but I can't find in Quicktime and I didn't see it mentioned in Quicktime Pro. Am I missing it? Can you recommend a player that will slow down/speed up my audio files?
Thanks,

Is there a way to Export the song file at the slowed down speed? I've tried and the saved file continues to play at normal speed.

Music speeds up and slows down

In the middle of a song, the music will suddenly speed up or slow down like a vinyl record played on the wrong speed.
I've tried reseting the iPod.
Anyone have this happen to them?

i am having a problem like this too. except my whole song is very fast and goes about 10% faster than it should normally, and i tried to reset my settings and changing headphones, but nothing works

Speeding up and slowing down still images

I still am unable how to figure this one out. I have found a slider bar under the art/clip. I right clicked, turned on time graph, moved this points around and still see no difference in sppeding up or slowing down. I am in the right place, close? In the motion window I see Time Remap, see points have changed but am unable to move this points from here, I can move other points like scale, rotate. In Time Remap I see a speed section but this is greyed out at constant speed.
I want to be able to have a still begin or end with a speed up or slow down as I pan or zoom.
Any suggestions?
~Mark

New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Shane

Help required - frequent hang and slow down in my MBP

Hi,
My MBP get slow down frequently with the colour circle come up and need a few minute to resume and hang again. ANd this hang seem can stop the hold machine even for Force quit and Activity Monitor
And it seem most likely that, if I quite Safari and Mail, it will be much better.
I have used iceclean and get below information in console
21/05/2010 6:03:36 AM ReportCrash[112] Saved crash report for ServerScanner[102] version ??? (???) to /Users/hkpchunghk/Library/Logs/DiagnosticReports/ServerScanner2010-05-21-060335localhost.crash
and below is crash report
Process: ServerScanner [102]
Path: /System/Library/CoreServices/ServerScanner
Identifier: ServerScanner
Version: ??? (???)
Code Type: X86-64 (Native)
Parent Process: launchd [86]
Date/Time: 2010-05-21 06:03:32.427 +0530
OS Version: Mac OS X 10.6.3 (10D573)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/PlatformHardwareManagement.framework/Versions /A/PlatformHardwareManagement
Referenced from: /System/Library/PrivateFrameworks/ServerFoundation.framework/Versions/A/ServerF oundation
Reason: image not found
You help is much appreciated.
Thanks

If a reboot is clearing some of the problem, you ought to check the capacity and use of your hard disk. How full is this? Anything less than about 20% space may begin to slow things down.
As for the Flash plugin, these do tend to slow Macs down with some sites. You might want to try Click to Flash to restrict the use. And as for CPU use, I saw 120% on a friend's MacBook Pro a couple of days back: too many Facebook games running at the same time.

Really stuck with speeding up and slowing down clips

Hi gang,
I have been reading the Final Cut manual for the last hour and fooling around with my clips, but I can't get the effect that I want.
I have a clip (CGI of a star field moving towards the observer) that I want initially to be frozen, then I want the clip to accelerate rapidly, and then end at about double normal speed. I thought I would be able to use keyframes and specify the playback rate at given points, but that option doesn't seem to exist. I have been playing with variable and constant speed settings, but these don't seem to work either.
Ideally, the clip would go like this:
1) first frame of original footage is frozen for 2 seconds.
2) the original footage then begins playing, accelerating rapidly from frozen to double speed over 2 seconds.
3) remainder of original footage plays at double speed until complete.
I feel like I am missing something obvious, but I can't get it to work!
Any suggestions appreciated.
Cheers!

Dude, I have the same problem. I found a picture/text tutorial on how to slow down, speed up and reverse all in one clip w/o chopping it up, but it was for FCP 4. I have 5 and when I ramp the green line down it speeds up, doesn't slow down. Is it just me or is the effect changed from FC4 to FC5.
I'm looking for a great video tutorial for FC5 or similar on how to slow, speed up and reverse a clip using the Time Remap Tool in FC.
If it's a DVD I have to buy so be it.
Thanks everyone.

Speeding up and Slowing down Clips

I know how to do this on the older versions of imovie, but this new layout is useless. Anyone know how to speed up clips? Im so confused!!!!!!

Dude, I have the same problem. I found a picture/text tutorial on how to slow down, speed up and reverse all in one clip w/o chopping it up, but it was for FCP 4. I have 5 and when I ramp the green line down it speeds up, doesn't slow down. Is it just me or is the effect changed from FC4 to FC5.
I'm looking for a great video tutorial for FC5 or similar on how to slow, speed up and reverse a clip using the Time Remap Tool in FC.
If it's a DVD I have to buy so be it.
Thanks everyone.

Speeding up and slowing down the same clip

Hi all,
Quite new to editing so sorry if this is a basic question but I have a single clip I want to speed up for a few seconds and then slow it right down or pause it even before letting it run at normal speed.
How can I do this in FCPX without cutting the clip up?
Thx

use the range tool to select a portion of the clip and then press command-r. Now you can apply retiming to just that range.

INTERMITTENT SPEED UP AND SLOW DOWN ON SAFARI URL

First, I apologize if this question has already been asked (answered), but I'm not about to spend the time to read 541 pagest to find out.
My basic question has to do with the inordinate length of time it takes to download (if that's the proper term) a URL in Safari 2.0.3, whether it is entered from an e-mail link, Safari Menue Bar, "Bookmarks", or directly typed in and started using "return" on the keyboard. Once, for a short while, it was a lot faster.
Things I've done and not done that may be of help to those interested in replying to my question (please bear in mind that, comparatively speaking, I am computer illiterate):
I have not emptied Safari cache in quite some time.
I have employed the application Safari Speed 1.3.
I have used the Utility application Disk Warrior (on the average of once a month, for the last nine months).
I have emptied download cache, user caches, and font caches using Onyx utility application; also, (on same utility) "Repair Permission", "Maintenance Scripts, and "Optomize the System."
I regularly use the OS X "Disk Utility" repair permissions before and after downloads, and, as a matter of maintenance, monthly, from the OX X 10.4 installation disk.
I have kept up with all the OS X updates, including a combo of the latest (10.4.5).
Is there anything I can do (or shouldn't do) to speed up Safari opening a Website?

Thanks DKR.
Unfortunately, none of the other Mac owners I know use the same server (they all go the cheap freebie route, which is terrible). Nor do I have an extra computer to test on.
But you give me the idea of contacting the server; it, fortunatly,is a very consciencous local outfit, and while naturally far more familiar with PC's, its technicians have always seemed eager to help we poor Macites.
What really bugs me (no pun intended) is the apparent variations with the same URLs (time of day doesn't seem to matter).
Interestingly enough, also, is the fact that the "Speed Safari" application seems to have no effect whatsoever.
Thanks again for the ideas.

Speedfan: Auto Speeds Fan Up But Never Slows Down

Hi
I have have setup Speedfan according to parameters posted in this forum.....
It seems no matter what... the fan control speeds up the fans but they never slow down unless I adjust them down manually....
I have messed with the advanced settings as well... and manual PVM control seems be the only thing automatically controlling the speed of the CPU fan...but as load and Temp go down..the fans never normalize or go down at all... they max out at whatever setting I've set in the speed tab....and stay there...
Any Ideas?

Well...geez....I dunno.....
It appears it is working now!!!
What have I done diffferently????.....I have no Idea....I have a Couple theories..but just guessing here.....
First I did another reboot.....then made sure corecenter was never started.....both of which I tried b4...but whatever.....
But I did notice one major difference.....this time When I launched Speedfan....there was less Info on the readings tab... as In less electrical info at the bottom.... as well as in the Temp and Speed areas of the wondow...can't remeber Exactly what is gone...but there appears to be a whole lot less useless text!!! and Only what Is Important left...!!!
Temps Are:
Desired : 45 deg
Warning : 55 Deg
Speeds are:
10 min
70 max
And After running a load all night....I took the load off and within one minute the Fan Dropped from 70% (my max set) to 40%..it's never done this b4.. all night messing with this and all I had to do was go to bed LOL....
Going to drop the desired temp to 40 and will keep you all up to date on this......
maz_b
:hypecrite: U R A Rockstar!!

Lion stalling and slowing down

Dead LION
Two-three months ago I upgraded to Lion (10.7.4)
The Lion discriminates a lot of applications
I should never have done that. Waste of money and especially a waste of my time.
There are NO essential news in Lion. It's just a monymaker for Apple
A bunch of applications does not work in Lion, while they been working fine in Snowleopard.
I could not delete the Lion and re-install SnowLeopard. (With out deleting all my datas).
I had to install SnowLeopard on a seperate external harddrive and now have to organize and disintegrate my else integrated work on two harddrives.
What a f'''''' bore. And absolute no thanks to Apple.
The Lion is stalling and slowing down, quits applications etc.
Since I installed the Lion on my computer (MacBook Pro 2 Ghz Intel core i7. 4 GB 1333 Hz DDR3)
is has been slowing down, in general and especially my browsers (Safari 5.1.7) (Google Chrome 13.0782.215) (Firefox 13.0.1). And Mail (5.2).
The OS quits applications, especially Mail and Safari.
The OS makes applications ever so often go in no-answer mode . Then I have to forcefully end them and start all over.
For speed and comfort I am back to 1991 Apple LC with 2 MB RAM. And no, the comfort was better then.
I have repaired disk with the OS own disktool.
I have reparied permissions again and again.
I have scanned for all problems and virus (MacKeeper).
I have rebooted and set the parametres to zero.
All applications are updated
Nothing helps.
I hope some of you friendly users or nerds can help. Thank you.
Best wisges Jan Knus

Sounds like a failed HD. Get another HD, install it, reinstall the OS, upgrade to Lion, and then restore the TM backup.

My browser takes minutes to open then when the tab is fully loaded it will start saying "Connecting" and slow down or freeze.

When I open my browser, it takes 3-5 minutes to fully open. When I get to a website, randomly the tab will say 'Connecting' and slow down and take 10-15 minutes to function or freeze completely. This almost always happens on sites that require Flash Player use. I have uninstalled and reinstalled my Flash several times. I've added memory, as someone suggested it was a memory issue. It's so frustrating, please help!

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

HELP! Fans speeding up and slow down

Similar Messages

Maybe you are looking for