Help fast PLZZ!!!!!! Quicktime isnteven installing

I just got a nano and previously had a shuffle. I still had Itunes from that but it said to reinstall when i insalled it so i did. Everytime it came to intalling QuickTime it would have all these errors coming up so i tried again. It crashed during installation (Itunes has encountered a problem and needs to close.....) but then went on to be an apparent succeful instalation
Now that same error report, needs to close thing comes up every time i try to open itunes so i tried installing Quicktime alone. I get the two following errors:
Error 1402.Could not open key: HKEYLOCALMACKINE\Software\Classes\QuickTime.qt\shell. Verify that you have sufficient access to that key, or contact your support personnel.
and
Error: -1603 Fatal error during installation
Consult Windows Installer Help (Msi.chm) or MSDN for more information
it then goes to finish.
What is wrong?

Seen this?
Error 1406 or 1402 appears when you install
iTunes or Quicktime For Windows
THANKS SOOOOO MUCH!!!!!!!!!!! i guess ill look harder next time.

Similar Messages

Need Help Fast! Page is dispalying twice in quiz

I have created a quiz using tips from another post in this
forum. I insterted a regular slide with a continue button before
the quiz questions. I insterted another regular slide at the end of
the questions with a re-take button that points to that first
slide. This part is working great. When I take the published quiz,
I click the continue button, and instead of continuing, the slide
redisplays. I click the button again, and it moves forward like
it's supposed to. Any advice?
I'm supposed to have these posted in our LMS today for
testing, so I need help fast!!! Thanks!!

What you're seeing is likely the result of a MS patch for IE
in response
to the Eolas patent suit.
MS recently updated IE so any content shown in a page using
the Embed,
Object, or Script tags will need to be 'activated' before
they can be
clicked (or otherwise 'interacted with').
Your home computer probably hasn't had the latest security
rollup
installed, is why you're not seeing the issue on that
machine.
There is a work around, many site mention it. This may be a
good place
to start:
http://www.macromedia.com/devnet/activecontent/articles/devletter.html
Erik
dukekelly wrote:
> Why is it that as soon as you ask for help, you find the
answer?
>
> This isn't a captivate problem at all. It's an IE
problem. Because the button
> is a control in Flash, our systems where I work are
requiring us to click the
> screen to activate the controls. THEN you have to click
the button. When I play
> the movie on my home computer, this phenomenon isn't
happening. Now, how am I
> supposed to deal with that??? ASRRGGGHH!!!
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.macromedia.com/support/forums/team_macromedia/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/groups?q=macromedia.authorware

Itunes 7 and quicktime wont install

Neither itunes 7 or the latest quicktime will install since I recovered my system and installed all the latest windows updates. I get the ol' "installer incountered errors before itunes could be configured, try again at a later time." popup.
I tried EVERYTHING on the available list of things to try that I found on the message board. please help!

Well, I after reading for about an hour, I ran windows intstall cleanup utility and standalone installed quicktime, and now my itunes works! Thanks for the support!

How can I get QuickTime to install

I am not computer person. All I am is a mom who wants her kids ipods to work. I can not get QuickTime to install or uninstall so that I can use itunes. I updated Windows and I tried several other things but I just can not get it to work. Help me!!!!!!!!

I finally got the quicktime to download and I also downloaded itunes but it won't work right. When I click on the icon to pull it up so that it will recogize my ipod it tells me it has a error for me to check with microsoft. I had a shuffle at one time that worked and when you plug your unit in it should take you to your playlist and things put it doesn't do that it just tells me I have a error.

After effects CC says quicktime not installed

Hi
after effects CC 2014 says quicktime not installed what can I do? This error comes on startup.
RUNNING:
Mac Pro (Early 2009)
OSX 10.9.4
AE CC 2014
12GB Ram
no external hardware

This may help: fixing permissions problem that impedes start of Adobe applications

Quicktime already installed?

My computer crashed and Quicktime disappeared (all other programs working perfectly), it is not in programs listing or directory so I am unable to uninstall it. When I try to install latest Quicktime from Apple (File version 7.74.80.86), I get this message:-
"QuickTime for Windows - A newer version of QuickTime is already installed. This installation cannot proceed while the newer version of QuickTime is installed."
It then suggests I try to insatll again.
I cannot find the "newer Version" to uninstall, anyhow why would there be a newer version than that from Apple?
Any help gratefully received.

"QuickTime for Windows - A newer version of QuickTime is already installed. This installation cannot proceed while the newer version of QuickTime is installed."
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another QuickTime install. Does it go through properly this time?

Help Upgrading To QuickTime Pro

I would like to purchase the upgrade to QuickTime 7 Pro. It says the following before upgrading:
"Please note:
Your QuickTime 7 Pro registration code only works with QuickTime 7. Be sure you have downloaded and installed QuickTime Player 7 before you enter your QuickTime 7 Pro registration code."
But my current version of QuickTime is 10.2. Do I actually have to install an earlier version of QT, (Ver. 7) before I can install QuickTime 7 Pro? Or is there a QuickTime 10 Pro and I just don't see it?
Thxs for any help.

Yes, you need to install QuickTime 7. There is no QuickTime X Pro.
(109339)

"QuickTime not installed" error

Apple support said the forums or Microsoft support is the best bet to figure out my issue.
I receive an error when attempting to run iTunes 7.3 after installing. The error is "QuickTime not installed, please reinstall iTunes".
I have done the following:
- reinstalled iTunes several times (including using the exact steps from here: http://docs.info.apple.com/article.html?artnum=93698)
- run the Windows installer cleanup (from here: http://support.microsoft.com/kb/290301)
- verified my computer is running 32-bit and not 64-bit windows (here: http://support.microsoft.com/kb/827218). I am running Windows XP Pro 2002 SP 2.
- used registry cleaners CCleaner and RegCure
- Attempted to install QuickTime standalone version, which gives me the vague message "The installer encountered errors before the requested operations for QuickTime could be completed". This is where Apple support says the problem is with XP, which I do not doubt, but is still difficult to troubleshoot.
- deleted iTunes/QuickTime/Apple registry entries in
HKEYLOCALMACHINE/SOFTWARE
HKEYCURRENTUSER/Software
HKEYCLASSESROOT/Applications
HKEYCLASSESROOT
- successfully installed QuickTime 6.5.2. Reinstalled iTunes. When running iTunes with this old version of QuickTime, I receive a message saying to reinstall iTunes. After reinstalling iTunes, I receive the same message.
I seem to be stuck in some infinite loops, and stumped Apple. This could very well be a Microsoft problem, and I have my iPhone working with my home laptop, but I don't think the Apple support suggestion of contacting Microsoft will work. I work in tech consulting, so I know that a vague error message to the effect of "encountered errors, try again later" will not be very helpful (to either Apple or Microsoft really - though the apple software is the one that isn't giving me any helpful message, as opposed to a windows error message).
Any help is much appreciated.
-Holt
compaq nc6400 Windows XP Pro

I may have made some progress on this issue.
I have installed an old version of QuickTime (6.5.2) that works successfully. However, when I try to use the Windows Installer Cleanup Utility to uninstall it, QuickTime does not appear in the list.
Any other software I have successfully installed appears on this list (in addition to the Add/Remove Programs list), including the version of iTunes that does not work. So for whatever reason, QuickTime is not registered as installed on my computer, which I beleive is causing the problems.

I NEED HELP FAST!!! how can i activate wi-fi if i want to use that for facebook apps instead of wasting my data?

i want the 200 mb plan for my iphone and wanted to know if instead of using safari i can use apps such as facebook or tumblr without using up my data. i got the asnwer that i can avoid that by using wi-fi, but how does that whole thing work?
sorry i am a bit new at this, and i need help fast!
THANK YOU!

hookedonlerman wrote:
but will that replace the use of using up data? (wifi & 3G)
It sounds as if you don't really understand what "using data" means. Data is not something different from WiFi and 3G, it's something sent over WiFi and 3G. Think of data as water and WiFi and 3G as types of pipes. Some apps need to send and receive data to work. That data can be sent or received in different ways. It can be sent over WiFi or 3G. Both official iPhone carriers in the U.S. have metered data plans. It's sounds as if you're talking about AT&T's 200 mb data plan. WiFi is not provided by your cellular carrier. You can have WiFi from your Internet Service Provider at home or you can access free WiFi at places like McDonalds or Starbucks or paid WiFi at places like airports.
If you have WiFi turned on on your phone and WiFi is available, the phone will default to WiFi. WiFi is faster than 3G and generally not metered, and is sometimes even free. If you are out of range of WiFi, you would be using 3G to send and receive your data. With a metered plan, you need to keep an eye on how much you are using because if you go over your allowance, you will be charged additional fees.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

Connect the iPod to your syncing computer and restore it via iTunes. However, if iTunes asks for the unknown passcode you need to place the iPod in recovery mode and then restore the iPod from backup. For recovey mode see:
iPhone and iPod touch: Unable to update or restore
"If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software."
Above is from:
http://support.apple.com/kb/ht1212

My little brother messed up with my iPod touch 4th Gen by entering the wrong password , now all data is beeing erased what should I do.The iPod is just showing the Apple Logo and some buffering icon below it.Need help fast!I'm really worried!

I really need help this has happend 5 hours ago and the ipod os still showing the apple logo and the buffering icon below it!
It re booted several times till now.
Need help fast!

- I suspect that he went to Settings>General>Reset>Erase all content and settings. For 1G or 2G iPod that can take hours and it will likely stall out if not connected to a charging source.
Try the following:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The connect to computer and try to restore via iTunes.
- Id something is still showing onthe screen, disconnect from computer/charging source and let the battery fully drain. After charging for an hour, Try the reset and restore.
- If you can turn the iPod off, se if placing the iPod in recovery mode and then restore. For recovey mode:
iPhone and iPod touch: Unable to update or restore

Need Help Fast Please

Why does this code not do what I want to happen?
I have a 7 non functional buttons above the buttons for the days in the month and I would like to be able to layout the buttons starting on the day that the month begins and ending where it ends.
Like in the microsoft windows calander.
Any ideas as to how I'd do this?
I need help fast. Please.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.io.*;
import java.util.*;
public class MyDairy extends JFrame
     //Initilises Global Variables
     myHandler H = new myHandler();
     monthHandler J = new monthHandler();
     openHandler O = new openHandler();
     String monthName;
     JComboBox months;
     static String[] daysOfWeek = {"Sun", "Mon", "Tue", "Wed", "Thur", "Fri", "Sat"};
     static int[] daysInMonth = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
     JFileChooser box;
     public MyDairy()
          //Initilises the JComponents
          JMenuBar menuBar;
           JMenu menu;
          JMenuItem menuOpen;
          JMenuItem menuSave;
          JMenuItem menuExit;
          JButton dayName[] = new JButton[7];
          JButton day[] = new JButton[36];
          JPanel b;
          JPanel a;
          Calendar today = Calendar.getInstance();
          Calendar startOfMonth = Calendar.getInstance();
          startOfMonth.set(Calendar.DAY_OF_MONTH,1);
          startOfMonth.set(Calendar.DAY_OF_WEEK,7);
          System.out.print(startOfMonth);
          //Sets up the Layout
          setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          Container c = getContentPane();
          c.setLayout(new BoxLayout(c, BoxLayout.Y_AXIS));
          a = new JPanel();
          a.setLayout(new GridLayout(0, 7));
          b = new JPanel();
          b.setLayout(new GridLayout(5, 7));
          //Sets up and adds the menu bar
          menuBar = new JMenuBar();
          setJMenuBar(menuBar);
          //Adds the File menu
          menu = new JMenu("File");
          menuBar.add(menu);
          //Adds the menu items
          menuOpen = new JMenuItem("Open");
          menu.add(menuOpen);
          menuSave = new JMenuItem("Save");
          menu.add(menuSave);
          menuExit = new JMenuItem("Exit");
          menu.add(menuExit);
          //Produses the ComboBox
          String[] name={"January", "Feburary", "March", "April", "May", "June", "July", "Augest", "September", "October", "November", "December"};
          months = new JComboBox(name);
          int m = today.get(Calendar.MONTH);
          int d2 = today.get(Calendar.DAY_OF_WEEK);
          System.out.print(d2);
          months.setSelectedIndex(m);
          months.addActionListener(J);
          c.add(months);
          c.add(Box.createVerticalStrut(10));
          switch (months.getSelectedIndex())
                   case 0: for (int i=1; i<36; i++)                          {
                     if(i<4)
                        day[i] = new JButton();
                        day.setEnabled(false);               }
int k = 1;
day[i] = new JButton(" "+k);                b.add(day[i]);
day[i].addActionListener(H);               k++;
}break;
//other case statement up to 11 are simaliar          }
c.add(a);
          //Produces an Array of Buttons
          for (int i=1; i<36; i++)
               day[i] = new JButton(" "+i);
               b.add(day[i]);
               day[i].addActionListener(H);
          c.add(b);
          updateNameField();
          setSize(400,400);
          show();
     }//constructor
     private void updateNameField()
          monthName = (String) months.getSelectedItem();
     class myHandler implements ActionListener
          public void actionPerformed(ActionEvent e)
               new Text_Area(monthName);
     class openHandler implements ActionListener
          public void actionPerformed(ActionEvent e)
               File f1 = New File ("2003.dat");
               simpleSerializer S = new simpleSerializer(f1);
               MyDairy = S.readObjectFromFile();
     class monthHandler implements ActionListener
          public void actionPerformed(ActionEvent e)
               updateNameField();
     public static void main(String[] args)
          new MyDairy();

Container c = getContentPane();
c.setLayout(new BoxLayout(c, BoxLayout.Y_AXIS));don't code like above try something like...
Box box=Box.createVerticalBox();
c.add(box);
----so on
Hope this will help...

Quicktime not installed error message upon installation of Itunes

HI,
I have Quicktime already installed (7.7 1680.34) and I have Itunes (10.4.0.80). Now when I seek to update to the latest Itunes I receive an error message saying 'Quicktime not installed' and then it stops the installation. Same thing happens after reinstallation of Quicktime. -What to do now?
//J Sundberg

Try removing QuickTime from Control Panel before installing iTunes 10.4.1.
Check out this Apple document, if you need a walkthrough of uninstalling from Control Panel -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Make sure you read the detailed steps, if you run in to a problem.

Need help fast with a buying decision - Leadtek 6800 GT

Hi there, I have the opportunity to swap my Club 3D 6800 GT for a Leadtek 6800 GT. The reasons I would do this would be the cooling and the games bundle.
I just wanted to know if anyone knows how the cooling is on this particular card and if it would be better than the reference design?
My other concern is that it has a huge copper heatsink on the back of the card, this would sit directly under the CPU HSF. There really would only be a few millimeters between them and due to the position of the socket on this board, the heat sink fins go up vertically. Would the heat from the card's copper heat sink rise up into the CPU HSF grooves and raise the temperature of the CPU?
Thanks for any help
I kind of need help fast as someone said they were gonna buy my other card of ebay today, there's still time to stop them if this is gonna be a bad idea

i would definately take the leadtek one over the club3d card, the cards themselves are all based on refrence designs just different cooling solutions and bundles
and the cooler on the leadtek is a lot better, and it isnt more noisy then the club3d one at all
it has better cooling, and they seem to be the ones which are the most available, and they overclock very well due to the better cooling

Media Encoder CC2014.2 crash on windows when trying to export when quicktime is installed

Hi,
I'm trying to export .mov files (created on random Mac computers in very hi-res) to reduce file size, and have the same output format. (possibly 1080p H.264-> .mp4)
I installed Media Encoder cc2014.2 on my pc (win7, 64bits, french).
When I first tested, Only the audio was being exported. But I soon realized I didn't had the proper codec installed on my PC.
(I wasn't able to play the original video file, only the audio was playing).
So, like a good boy I installed Apple Quicktime (7.76.80.95)
With quicktime on my PC I was able to play the original video file. (with quicktime player)
So I opened Media Encoder again, and on the preview this time I can see the video with the sound. But as soon as I start the coding (the little green arrow) Adobe Media Encoder crash.
I have tried multiple output format, it always crash right when I start exporting the file.
I uninstalled Quicktime, and media encoder is working again ... but my original files (.mov) can't be exported with video, only the sound.
I have tried a third party codec (K-Lite), I can see the video+sound on my pc, but Media Encoder is still blind, no video, only the sound.
Is there a way to add codec to Media encoder without having to install Quicktime?
Or a way to make Media Encoder work on my PC when Quicktime is installed?
btw I'm sorry if my text is a bit confusing, I'm french speaking
Thank's in advance!

The Error is back!!!
Yesterday it worked today it crashes when I export from premiere via media encoder. I tried it with all the things you told me:
1. Bars+Tone => export => crash
2. Video Project with 2 short h264-files => export => crash
3. Software only renderer => crash
These are the two logs that I found:
Ereignis-ID 1000
Die Leistungsindikatoren für den Dienst WmiApRpl (WmiApRpl) wurden erfolgreich geladen. Die Eintragsdaten im Datenbereich enthalten die neuen Indexwerte, die diesem Dienst zugeordnet sind.
System
Provider
[ Name]
Microsoft-Windows-LoadPerf
[ Guid]
{122EE297-BB47-41AE-B265-1CA8D1886D40}
EventID
1000
Version
0
Level
4
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-04-16T08:25:51.922502600Z
EventRecordID
3402
Correlation
Execution
[ ProcessID]
19984
[ ThreadID]
24964
Channel
Application
Computer
Schnittplatz
Security
[ UserID]
S-1-5-18
UserData
EventXML
param1
WmiApRpl
param2
WmiApRpl
binaryDataSize
16
binaryData
38270000DE27000039270000DF270000
So it would be great if you have any idea what to do...

Help fast PLZZ!!!!!! Quicktime isnteven installing

Similar Messages

Maybe you are looking for