Help - Fatal Error When Loading New Updates of System Software

Help please!!
I have a 8120 and just logged in to sync ( as I do weekly) and was alerted to a Latest Update of Software, so I clicked yes etc. and it all started well, then when the software was part way through the install - suddenly it issued me with a Fatal Error Please try to reload the software message .
Now I have no way of connectining to the BB as it appears I am now without any software (just a circle with a line through and the numbers 507 on the screen)
Can anyone suggest what to do please?
thanks
Gavin

Hi and Welcome to the Forums!
Ouch...that sounds not so good. Here is a KB concerning the 507 code:
KB02792 Error message "507" appears on the BlackBerry smartphone while upgrading BlackBerry Device Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Fatal Error when trying to update BB

Ok, trying to keep short. System worked. Running 4.7 on desktop with outlook 07 on Vista. UPdated desktop to V.6. Would no longer recognize any of my 200+ media files. So I reinstalled 4.7. Now I can upload my media, but it will not sync with the rest of my data. All I get is a fatal error.
I know the problem is that the BB Curve 8900 is working on V.6 and the Desktop is running on V4.7, but how do I fix this. I have rebooted and reinstall computer and desktop software. Did not work. I tried to limit the updated modules to try and narrow the error down to a module. After two hours of trying one at a time. They all Fatal errored.
I am to the point that the only solution is to do a hard reset on the BB. The problem with that is that I have registered media on the BB that can not be reinstalled. Am I going to have to Pay for the Media again just because BlackBerry can't write software that works?
Any input and advice would be appreciated. Thanks.

Hiya!
Hard reset has been know to cause some issues with content... but in rare cases and usually only if you have that file open when you pull the battery.
So a battery pull shouldnt affect it.
Or were you referring to a wipe handheld?
1). Please thank those who help you by clicking the beside the 'Reply' button.
2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
3). Remember to have fun! We are all in this together!
4). Follow me on

Error when loading delta update from DSO to cube

hi Experts,
I am loading a delta DTP, get dat by requests from an dso to a cube, while doing that encounter an error :
"Exception CX_RS_ERROR occurred (program: CL_RSTRAN_RUNTIME_EXE=========CP,
include: CL_RSTRAN_RUNTIME_EXE=========CM001, line: 210). "
Any pointers ?
Thanks.
Sharat.

Hi Sharat,
We are getting the following error while loading data form DSO into InofCube.
Exception CX_RS_ERROR occurred (program: CL_RSTRAN_RUNTIME_EXE=========CP, include: CL_RSTRAN_RUNTIME_EXE=========CM001, line: 231).
Message no. RS_EXCEPTION000
Please help us in resolving this.
Thanks,
Shalin

HT4972 I keep getting an error when trying to update my ipad software to IOS5. The error is a Network timeout error when in fact my connection to the internet is stable and strong. Any suggestions?

I've tried to update my ipad softward to the new IOS 5 software but keep getting internet connection errors.
Initially, I thought it was related to my internet connection but I've tried with full connection and still getting the same error.
Any suggestions would be a great help.
PS - from South Africa

Thanks King_Penguin - I've disabled both my firewall and antivirus software to no avail.
Any other suggestions?
Using Windows Vista - not sure if that make any difference???

Fatal Error while trying to update device software

I have recently purchased my first blackberry (the storm). I have added the desktop manager to my computer and when I connect my device, it automatically checks for updates. It shows that I have have software updates to download, it gives me a summary of applications to update. Then it asks to click finish. When I do that, it goes to an Error message: Fatal error has occured while updating your devices software. Please try again. I have tried many times, and I even removed the desktop manager and reloaded it, with the same results. Any ideas?

What version of the desktop manager are you using? Do you have enough free memory? and what version are you using now, options/status
If someone helped you give them kudos. Research all info!

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Desktop manager- fatal error when updating OS BOLD 9000

Hi guys a few days back my girlfriend entered my password wrong and my blackberry wiped itself, I downloaded bbsak and wiped the phone, and wiped it again with JL_Cmder, it says reload software 507, when I go onto application manager and select update it tells me "fatal error has occurred while updating devices software. Please try again", bbsak also wont load the OS it tells me "the application loader wizard requires that the blackberry device manager needs to be installed", but it is installed on my PC, and when I go to C:\Program Files\Common Files\Research In Motion\AppLoader and select loader it gives me the same error as when I try loading the OS from bbsak, I am running windows XP service pack 2 and desktop manager v5.0.1, and I have OS 4.6 and the latest version 5.0 please help guys, thanks, I will appreciate any help possible

Hey Varushen,
Welcome to the BlackBerry Support Community Forums.
I would suggest try to reload the software by going to www.blackberry.com/update
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

HT1926 Trying to repair a botched ITunes update, following dicrections, keep getting "fatal error" when removing Apple Mobile Device Support. Can't get past this step to reinstall. Any advice? Thanks!

Trying to repair a botched ITunes update, following dicrections, keep getting "fatal error" when removing Apple Mobile Device Support. Can't get past this step to reinstall. Any advice? Thanks!

Hey there!
I've spent the best part of the day unpicking this huge mess from the upgrade I completed last night - what a nightmare. I followed a tonne of advice - [actaully, this link was really helpful to me]: http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm however, I still could not fix the **** thing - and that was following basically a day of uninstalling, installing etc.
In the end - I completed a system restore taking my computer back about five days, and just ignoring the new upgrade with itunes until they can get this fixed.
I hope that this might work for you and anyone else reading this. It nearly drove me to drink [!]. I seemed to get past one error message and have it replaced by another - so the system restore was basically the last resort.
Good luck - !

I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer

I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer.
When I try to open Firefox, it opens. But there is the error message.
What is this? How do I did rid of it?
'''bold text'''

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
You can also check the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

I haven't updated my iPod in forever so when the new update came out I tried to update it but it kept freezing my computer so I had to manually shut it off and restart it. I have windows btw. Someone please help me !!!!!!!!

I haven't updated my iPod in forever so when the new update came out I tried to update it but it kept freezing my computer so I had to manually shut it off and restart it. I have windows btw. Someone please help me !!!!!!!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I am getting error 49 when tring to update Creative Cloud software. Please help!

I am getting error 49 when tring to update Creative Cloud software.

I'm getting this error too. It appears on all products. When I closedown and relaunch CC Desktop, all products show up to date.
PS is showing 14.0 x64.
I have tried a clean install of CC and also used the cleaner tool. Nothing has resolved the issue.
I am on Mac OSX 10.8.5.
Neil

Error when generating the update program RSAU484

Hi,
I am getting the following error while loading data into customer master from CRM system
Error when generating the update program
Message no. RSAU484
Diagnosis
An error occurred during program generation for InfoSource MR_CDB_CUST_HFR and InfoProvider 0BPARTNER$T. This may be extrapolated to incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program again. You can find help on the error in the error log.

Yes,there is just a single line of code in the start routine
DELETE DATA_PACKAGE WHERE CUSTOMER is initial.
and update rules for Business partner and customer market which are object mapped 1:1. No routines or formulaes.
Could this be a technical issue on the flexible update or a data quality ?

BW Statistics-BI7-Error when generating the update program

Dear All,
We faced the below problem in while executing the infopackages for BW statistics in BI7.0
7099 records from 7099 records..but shows request is red.
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Update rules ( 7089 -> 0 Records ) : Errors occurred (RED)
Update rules ( 7089 -> 0 Records ) : Errors occurred
InfoCube 0TCT_C23 will be updated
Error when generating the update program (RED)
Is there any notes to apply for this?
Initilaztion is executed with out any errors!!
Regards

Hi
Caller 01 : If there is any inconsistecy while loading the data or if the program cannot able to execute a specific task it will give the caller errors.
check in the transaction ST22
check for the OSS notes 631668, 860475
Check the below links which have a discussion on the same problem.
A caller 01, 02 or equal to or greater than 20 contains an error meesage
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
ERROR?
Data load System error
Hope this will help
Regards
Shilpa

U44M1P7 error when trying to update Photoshop

HI all
I'm getting the U44M1P7 error when trying to update Photoshop CS6 to the new Creative Cloud version via AAM. Anyone know what is causing this and how I can get the update to load
Computer
Third gen i7, 8GB RAM, Windows 8, 2GB NVIDIA 650M

Try this manual download link, it worked for me.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5595&fileID= 5604
Scott

Error when generating the update program::::ID RSAU No. 484****

Helllo,
While Infopackage loading for DS 2LIS_04_P_COMP following error is coming.. please see if anyone may face such kind of error.
***Error when generating the update program::::ID RSAU No. 484***
Diagnosis
     An error occurred during program generation for InfoSource
     2LIS_04_P_COMP and InfoProvider ZISPP_C01 . This may be extrapolated to
     incorrect update rules.
Procedure
     Check and correct your update rules and then generate the update program
     again. You can find help on the error in the error log.
amit shetye

hi,
Do a check on the update rules and see if it returns no errors...
if that is the case, then check the short dump and try to get the program name for the update rules..In se38 putting the program name, you can go inside it and do a check there as well if there are any errors....
If in the end yo still dont find anything, try to delete and re-create the update rules..
But i think you will get quite useful info from the dumps if there are any..
hope this helps you..
regrds,
Jadeep

Help - Fatal Error When Loading New Updates of System Software

Similar Messages

Maybe you are looking for