Help! FCP 6.0.6 Export Failed "File Access Denied"

I use HDV video captured via Firewire with a Sony external HDV deck.
In FCP, I use "Easy Setup", Format: HD / Use: HDV-1080i60.
Export using Quicktime (not quicktime conversion) and set export using HDV 1080i60.
No matter the legnth of the sequence, I will get the error message, "File Access Denied", but not until the end of the export! So it will go until the export should be "done", then give me the error message.
All files are on the computer's hard drive, no external hard drives are used to or from when exporting.
Any help would be appreciated! Thanks in advance!

Did you COMPLETELY UNINSTALL FCP before you reinstalled it?
Trashing the icon is not enough - there may be corrupt files remaining which will ruin the new installation.
This article tells you how, together with other troubleshooting techniques:-
http://support.apple.com/kb/TS1846?viewlocale=en_US
Alternatively you can use FCP Remover but it will clear everything from the FCS set of apps:-
http://www.digitalrebellion.com/fcs_remover.htm

Similar Messages

  • Final cut pro : Export failed - File too large

    Hello
    I'm trying to export a project in FCP 10.0.5.
    It seems to work but when it reaches 45% the export stops and here's the message :
    Export failed : file too large ...
    Can anyone help me please?
    Thank you,
    Fred

    The file size is about right but your sampling rate is wrong.
    44.1 kHz is CD Audio standard. Digital video uses 48 kHz -you can use QuickTime Player to resample:
    File > Export > Sound to AIFF. Click Options and then *Audio Settings* to change the sampling rate.

  • I cannot open files - they come up with an error opening this file - access denied.  Help!

    All my adobe files are now the same - they will not open at all - access denied with no reason other than an error!  Help!

    Hi - Strangely enough the files opened the very next time I tried!  It 
    must be my fickle computer!  My Adobe is quite new so I do not think it is 
    outdated.
    Thanks for the reply anyway - I will plough on.
    Cheers -Patti
    In a message dated 01/04/2015 09:57:13 GMT Daylight Time, 
    [email protected] writes:
    You  have been mentioned
    by  Anubha  Goel
    (https://forums.adobe.com/people/Anubha+Goel?et=notification.mention)  in Re: I cannot open files - they come up with an error 
    opening this file - access denied. Help! in Adobe Community - _View  Anubha
    Goel's reference to you_
    (https://forums.adobe.com/message/7394775?et=notification.mention#7394775)

  • Sql agent job getting file access denied error

    I'm not sure if this question belongs in this forum. Please move it if you want to.
    Here is my question. I have an ssis package that is running into an error at the file system task trying to move a file. The package is deployed to the catalog and I am running the package using the stored procedure
    [SSISDB].[catalog].[start_execution] @execution_id
    When I execute this stored proc in Management Studio while logged in under a sysadmin, everything works fine. But when I call the same TQL in SQL Agent job, I get a file access denied error. This has something to do with the id that is getting used
    to run the package and I am not sure how to track that down. Any help would be appreciated.
    I've check the windows permission on both the id that is running the SQL Agent and SQL SSIS Service. Both seem to have the right windows permission.

    Please see:
    http://support.microsoft.com/kb/918760

  • File access denied

    I'm not really a computer savy so can someone help me please! I tried to install a dvd photoshop cs4 extended and all I got was a pop up auto play window that said " file access denied". I have  windows 7 and reading some posts I tried to right click on the .exe to run it as an administrative mode but nothing happens when I right click it. Can someone help ?

    You say "nothing happens" when you click on the .exe file, do you not get a context menu popping up?
    You could try copying the installation package from the DVD to the desktop and trying from there.
    [Without wishing to be alarmist, there have been lots of cases of brand new, shrink wrapped copies of Photoshop sold on eBay which turned out to be fakes. See http://forums.adobe.com/message/1636890#1636890]

  • Just started getting error messages:  "error in trying to open this file, access denied"

    Can anyone help?  Just started to get error messages:  "error in trying to open this file, access denied"  This ha-ppens when trying to open PDF attachemnts to e-mail, something we have been doing for years.  No new softare had been loaded recently so I can't explain what is happening.  Anyone with any insight in to this situation?

    What OS and Adobe Reader version are you using. Also what e-mail application are you using.

  • Develop option states file access denied

    When trying to edit an image in Lightroom,moving from library to develop it tells me "file access denied." I need help please

    Then I wonder if this could be a permissions problem either with your folder where the catalog is located or where the images are stored.
    Is this something that just started? Have you been using Lightroom, and has it been performing normally?

  • File Access Denied Error trying to load Photoshop CS4 on Windows 7

    I am trying to load Photoshop CS4 on Windows 7 64bit & I keep getting File Access Denied. I am unable to read to the disk or to load the program. I do not have the option to open as administrator.

    So when you put the disk in it won't run correctly? When the disk is inserted you should have a window pop up with 2 options. 1 to install and the other to see what is on the disk. Choose to explore or open the disk. Go to the CS4 folder where the photoshop .exe file is (that will run the setup), right click on the .exe file and choose run as Admin and it should start. See if it will install. If not then read below.
    I am not sure how far you got in the install before so chances are you will have to run the CS4 cleanup utility. 2 levels to run at but don't use 1 or 2 just type in the number 3.
    http://www.adobe.com/support/contact/cs4clean.html
    You may need to run the windows installer cleanup utility too
    http://support.microsoft.com/kb/290301
    Before you try to reinstall the software ensure that adobe reader is not installed. If it is remove it. It has caused issues in the past with vista and CS4 installs.
    Also turn off windows Defender and any anti-virus software. You can keep UAC on in Windows 7.
    During the CS4 install at 90 percent it will almost stop and may take 5 to 10 mins to finish. This is normal. What a pain huh......
    After install is finished, reboot
    After reboot, go to the CS4 64 bit or 32 bit icon (depends on 32 or 64 bit Windows 7) in start area, right click on CS4 64 bit (if you have windows 7 64 bit) and choose properties, compatibility tab and then check run as Admin at the bottom area. Hit apply, ok to close out.
    Now start CS4 and run the updater.

  • User prefs.Lock file access denied

    Hi,
    Under linux (RH 7.2, kernel 2.4.9-13) w/ JDK 1.4.1-01,
    when I run several of the Swing tutorials (e.g., ListDemo, MenuDemo) and close the window I get this
    error:
    java.lang.SecurityException: Could not lockUser prefs.Lock file access denied.
    at java.util.prefs.FileSystemPreferences.checkLockFile0ErrorCode(FileSystemPreferences.java:926)
    at java.util.prefs.FileSystemPreferences.lockFile(FileSystemPreferences.java:915)
    at java.util.prefs.FileSystemPreferences.sync(FileSystemPreferences.java:723)
    at java.util.prefs.FileSystemPreferences.flush(FileSystemPreferences.java:814)
    at java.util.prefs.FileSystemPreferences.syncWorld(FileSystemPreferences.java:469)
    at java.util.prefs.FileSystemPreferences.access$1200(FileSystemPreferences.java:33)
    at java.util.prefs.FileSystemPreferences$12.run(FileSystemPreferences.java:459)
    I suspect a problem w/ my environment, but am stuck as
    to what. Any advice would be welcome.
    -- marcia

    Every other major application running on your system uses
    the etc directory for it's Preferences... why can't
    Java... The problem isn't that Java shouldn't add requirements for the VM, the problem appears to be that Sun did add requirements, and never told anyone.
    I'm looking at the self-extracting installation instructions for Linux, http://java.sun.com/j2se/1.4/install-linux.html#self-extracting, and nowhere does it state that you must be root in order for the VM to install properly. There is a note about installing to /usr, which you need root access for, but there is no specific requirement that you must be root in order for certain directories to be created properly.
    What about applications that distribute a JVM? Did anyone tell these application developers that their users will have to install their software as root?
    Maybe I'm missing something. If I am, could someone please point me to it?

  • PCROleObj- PutRefFormattedPicture() fails with ACCESS DENIED

    I am trying to change the bitmap of an OLE object in a CR9 report. Having successfully located the object and put it in pCROleObj, I then run the code below and it fails with access denied. Why?
    IPictureDispPtr pPicDisp;
    PICTDESC pd;
    pd.cbSizeofstruct = sizeof(pd);
    pd.picType = PICTYPE_BITMAP;
    pd.bmp.hbitmap =
         LoadBitmap(theApp.m_hInstance,MAKEINTRESOURCE(IDB_LOGGA));
    OleCreatePictureIndirect(&pd,IID_IPictureDisp,TRUE,(LPVOID *)&pPicDisp);
    pCROleObj->PutRefFormattedPicture(pPicDisp);

    Same reply applies to here as in this thread:
    AddPictureObject() returns 0x80047cbd
    Ludek

  • FCP Stops responding when exporting quicktime file still

    FCP Fresh install and FCP Still fails to export quicktime file, stops responding.
    I'm in the middle of a project, that really needs to be finished ASAP. Anyone out there have a solution to fix this problem, will be appreciated more than can be said.
    Power Mac G5 Dual 2 GIG   Mac OS X (10.4.6)  

    You know Lloyd, if this is a second thread about an old problem, you are really better off in the original thread. It allows us to follow along with the problem at hand, what has been suggested and what you have tried so far and the results.
    Just off the top of my head and without searching for the original thread (I'm too lazy today,) I'm guessing you might have a corrupted file or render file.
    Does it always stop at the same place? Where is your media stored? to where are you exporting? How much ram do you have?
    Here we go, starting all over again...

  • Tn3270 fails on access denied

    After configuring the tn3270 Provider I downloaded from Protal Studio, I attempt to connect to the mainframe and it hangs with a grey screen.
    I checked the trace file and here are the firs few messages (where nn.nn.nn.nn is the IP address I configured and YYY is the port I configured)
    Inside Tn3270Applet.init()
    Inside Tn3270Applet.start()
    Inside Tn3270Bean()
    nn.nn.nn.nn
    Inside Tn3270Bean.connect()
    Inside Tn3270Main()
    Inside Tn3270TcpConnector()
    Inside Tn3270Display()
    Inside Tn3270Cursor()
    Inside Tn3270Stream()
    Inside AID
    Inside Tn3270Main.openConnection()
    Inside Tn3270TcpConnector.openConnection()
    Inside Tn3270TcpConnector.openConnection()
    access denied (java.net.SocketPermission nn.nn.nn.nnn:yy connect,resolve)
    Inside Tn3270Bean.startThread()
    Inside Tn3270Applet.renderData()
    Inside Tn3270Bean.run()
    Inside Tn3270Main.readInputStream()
    Inside Tn3270TcpConnector.read()
    null
    Inside Tn3270Main.processInputStream()
    Inside Tn3270TcpConnector.process()
    Inside Tn3270Main.readInputStream()
    Inside Tn3270TcpConnector.read()
    null
    Inside Tn3270Main.processInputStream()
    Inside Tn3270TcpConnector.process()
    Inside Tn3270Main.readInputStream()
    Inside Tn3270TcpConnector.read()
    null
    Inside Tn3270Main.processInputStream()
    Inside Tn3270TcpConnector.process()
    It stays in this loop forever. I tried this in Internet Explorer(v#6.0) patched up to SP1 and Netscape (v# 7.1) and in both cases it fails identically. I even downloaded the late4s JRE from Sun - but to no avail.
    Any help would be appreciated.
    Thanx, John Watson

    I'm running command: prnmngr.vbs -a -p "blah" -m "blah" -r "blah"
    I have made some progress on this, disabling UAC resolves the issue but it is not a suitable solution.  Any ideas?
    The code runs fine on Windows 7 & 8 with UAC enabled.
    Yes - do not use legacy methods on WS2008R2.  You should be using Group Policy to connect user printers.
    Why do these printers have to be constantly reconnected.  Are they on wheels or have wings.  Printers get connected once and are published in AD>  Users can choose the printer they need from a list.
    "Prnmngr" is a leftover from NT 4 and is maintained for use in stand alone systems. 
    PrintManager does all things and more.  It has been the replacement since WS2003R2.  Note that is WS2003.
    http://technet.microsoft.com/en-us/library/cc753109(v=ws.10).aspx
    ¯\_(ツ)_/¯

  • MaxDB KNLDIAG file access denied

    Hi,
    I'm a DBA recently assigned to support MaxDB database (ver 7.6) used by
    SAP Content Server in our windows 2003/32 bit environments.
    Initially, our windows support group granted the DBA group access to
    the files on E:\sapdb\data\wrk\CD1 where the KNLDIAG and other files
    are allocated. We were able to view the KNLDIAG file when errors
    occurred.
    However, when the database instance is placed offine and back online,
    we loose access to the KNLDIAG file, but not the other files on the
    same directory/subdirectory.
    Can you explain what is happening?
    Is MaxDB doing something behind the scenes?
    What can be done so that we don't loose access to this file?
    I would appreciate any help you can provide.
    Regards,
    Bill

    Hi Bill!
    > I'm a DBA recently assigned to support MaxDB database (ver 7.6) used by
    > SAP Content Server in our windows 2003/32 bit environments.
    > Initially, our windows support group granted the DBA group access to
    > the files on E:\sapdb\data\wrk\CD1 where the KNLDIAG and other files
    > are allocated. We were able to view the KNLDIAG file when errors
    > occurred.
    > However, when the database instance is placed offine and back online,
    > we loose access to the KNLDIAG file, but not the other files on the
    > same directory/subdirectory.
    >
    > Can you explain what is happening?
    Yes, no problem!
    > Is MaxDB doing something behind the scenes?
    Of course not - it's well documented
    Unlike Oracle MaxDB does not use the same file all the time to write out the error messages.
    Instead, with every restart the last file 'KLNDIAG' (and/or 'KNLMSG'  in more recent versions) is renamed to 'KNLDIAG.OLD'. If there is already an 'KNLDIAG.OLD' this file is gone afterwards.
    Then a new file is 'KNLDIAG' is created by the MaxDB Kernel with the default permission of the folder.
    Usually these are dictated by the Windows account that runs the MaxDB-Service.
    If you did not change this, this would be the "local systemaccount".
    On my test system this results in default permissions that allow members of "Adminstrators", "Backup Operators", "System" and of course the "Owner/Creator" to access the file.
    > What can be done so that we don't loose access to this file?
    Simple: if you want to access it via OS tools, make sure that the user is a member of the "Administrators" or the "Backup Operators" group.
    If you don't want to do that, just use the file access via the DBMGUI or DB Studio (or DBMCLI) to get access to the file.
    regards,
    Lars
    p.s.
    Maybe you didn't notice that by now - the KNLDIAG file is not simply written at the end of the file, but consists of a startup header part and a body which is cyclically overwritten.
    For any newbies I cannot overstate the importance of reading the documentation [http://maxdb.sap.com] and/or get a training for it (SAP course ADM 515 really pays of here...)

  • Oracle Apex export application getting access denied when trying to download

    DB: 11.2.0.3
    Apex: 4.2.2.00.11
    Apex Listener: 2.0.3.221.10.13
    WLS: 10.3.6.0
    Chrome: Version 29.0.1547.76 m
    and IE 10.0.9200.16660
    I'm the admin of the workspace that has one application. Made a change to the application and went to export the application so I can source control it.
    Followed the Export wizard while in the application, hit the Export/Import button and clicked Export. Changed the File Format to "Database", Export Supporting Object Definitions to "No" and left everything else as default. Clicked the Export Application button and get "Application 108 exported" success maessage. Navigate to the Manage Export Repository and I see the exported application labled "f108.sql and I click on it and I get "Access Denied".
    Whats the trick? What am I missing?
    If I change File Format to "Unix" or "DOS" the file automatically downloads.
    Thx,
    Russ

    Hmm I wonder if it has something to do with:
    bug #16760897
    http://www.oracle.com/technetwork/developer-tools/apex/application-express/apex-422-known-issues-1940409.html
    The bug description mentions ORA-06502, but get_file has a when others exception handler that simply returns "Access Denied".
    What do you folks think?

  • Folders and Files access denied from Server 2008 on Windows 7

    I upgraded my server from 2003 to 2008. Now my Windows 7 machines can't open files in the Shared Documents on the server.  Error comes back with access denied.  Can use remote desktop with a Windows 7 machine and have access to the Shared Documents
    folder.  Any help as to why getting access denied would be great.

    Hi,
    Plesase check ntfs permisions and share permssions of the shared folder. You could try to set share permissions to Full Control for the Everyone group to see if the issue still exists. 
    Share and NTFS Permissions on a File Server
    http://technet.microsoft.com/en-us/library/cc754178.aspx
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for