Help figuring out model
I picked up a used imac on a good deal recently and want to upgrade the RAM but am not sure if it's a 2008 or 2009 model as they seem to have the same specs. It's a 20" iMac model A1224. I just need to clarify because the 2008 has a max of 6GB ram and 8GB on the 2009.
Also just as a new imac owner, can you pull out the plug from the back just for future reference? I pulled on it pretty hard assuming I could to clean the cord and didn't seem like it was detachable.
See > Lookup Mac Specs By Serial Number, Order, Model & EMC Number, Model ID
or > How to identify iMac models
Then for RAM, check out > Upgrade Apple iMac Memory & more – Easy Guide
The iMac's have a typical computer power cable connection, except that it has a magnetic ring to help hold it in place.
Similar Messages
-
Help figuring out the next step
Credit card became invalid and so I needed to resign up. I created a different log in and pass word because I couldn't remember the original log in and pass. I have already paid for a new subscription and removed and redownloaded skype but when I try to use skype it says I need a subscription. I need help figuring out the next step because it won't let me skype to a mobile in Togo Africia and I have already paid for a new subscription with my new credit card. Help!! Donna
you can visit the link below for instructions on how to check the status of your current order;
https://support.skype.com/en/faq/FA288/what-is-the-status-of-my-order
if you need further assistance, you can also try to contact customer service. Just open the link pasted below to see the instructions on how to get in touch with customer service -
https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES -
I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.
amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive -
I have a mac 10.5 and need help figuring out how to change my email settings so it does not automatically delete my inbox every 30 days. How to I adjust the mail settings?
I think it must be an IMAP account then, & in Mail>Preferences>Accounts>Advanced>Keep copies for Offline viewing:>Don't keep copies, then on the Server, or maybe it's just this one itself, but on the Server you have a setting to remove eMails after 30 days.
If it's a POP account we'd have to investigate that... but you didn't say so I'm guessing here. -
Need Help figuring out how to alphabetize itunes artist.
I need help figuring out one more thing. I have my artist tab in my itunes library and I need to figure out how to get all the artists grouped together instead of being scattered all around.
This is how it looks now:
Justin Timberlake
Linkin Park
Linkin Park
Linkin Park
Justin Bieber
Daughtry
Linkin Park
Linkin Park
JoJo
Linkin Park
This is how I want it to look:
Daughtry
Justin Timberlake
Justin Bieber
JoJo
Linkin Park
Linkin Park
Linkin Park
Linkin Park
Linkin Park
Please help! Thanks!Enable the Sort Artist, Album Artist and Sort Album Artist columns so you can see what is going on. Album Artist normally takes precedence over Artist, with the Sort fields further controlling the order.
See also Grouping tracks into albums.
tt2 -
How do I get my previous contacts from mobileme now to the icloud? I need help figuring out how to make that transition?
Try using the app My Contacts Backup, which will back up your contacts as an attachment to an email. Send this email to yourself, open it on your Mac and double-click the attachment to import them to Address Book (or Contacts if you have Mountain Lion).
-
Need help figuring out crash report please!
Hi there,
So, lately I have been playing Diablo 3 and found out that it has been running slow (FPS wise) so I switched over my graphics card to the NVIDIA GeForce 9600M GT.
Everytime I run the game, randomly my computer will full on crash the sound will freeze and repeat it's self and no buttons work except a hard shut down.
Once I reboot, this is the crash report I get:
Interval Since Last Panic Report: 1233165 sec
Panics Since Last Report: 7
Anonymous UUID: 7B2BFC9A-4351-4CC0-8A24-3F6077B1BD3F
Sat May 19 18:34:23 2012
panic(cpu 1 caller 0x9d4c97): NVRM[0/2:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd4000000 0x5a191000 0x096380c1, D0, P3/4
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x5292b888 : 0x21b837 (0x5dd7fc 0x5292b8bc 0x223ce1 0x0)
0x5292b8d8 : 0x9d4c97 (0xbea22c 0xc5a840 0xbf8f88 0x0)
0x5292b978 : 0xaef5db (0x8f4a004 0x98b2004 0x100 0x200)
0x5292b9c8 : 0xae65d4 (0x98b2004 0x100 0x5292bac8 0x558ce4)
0x5292b9f8 : 0x17eb7bb (0x98b2004 0x100 0x4bcd2cee 0x1)
0x5292bb38 : 0xb0e258 (0x98b2004 0x98ae004 0x0 0x0)
0x5292bb78 : 0x9dde2b (0x98b2004 0x98ae004 0x0 0x0)
0x5292bc18 : 0x9da50a (0x0 0x9 0x0 0x0)
0x5292bdc8 : 0x9dc3d9 (0x0 0x600d600d 0x702a 0x5292bdf8)
0x5292be98 : 0x970582 (0xc1d00021 0xaa910001 0x20802040 0x5292bee0)
0x5292bef8 : 0xd3257d (0x8f94000 0x5292bf4c 0x0 0x7)
0x5292bf58 : 0xd3271a (0x8f76800 0xd39e54 0x5292bf78 0x2a45c9)
0x5292bf78 : 0x230235 (0x8f76800 0x0 0x5292bfc8 0x227cea)
0x5292bfc8 : 0x2a179c (0x863ea0 0x0 0x10 0x150b6f00)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AGPM(100.12.31)@0xd2f000->0xd39fff
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x93f000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x961000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x928000
com.apple.nvidia.nv50hal(6.3.6)@0x16c0000->0x1ad4fff
dependency: com.apple.NVDAResman(6.3.6)@0x96e000
com.apple.NVDAResman(6.3.6)@0x96e000->0xc5bfff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x928000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x961000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x93f000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro5,1 (Mac-F42D86C8)
System uptime in nanoseconds: 34473350339409
unloaded kexts:
com.apple.driver.AirPortBrcm43xx 423.91.27 (addr 0xeeb000, size 0x1900544) - last unloaded 165512271751
loaded kexts:
com.vmware.kext.vmnet 3.0.0 - last loaded 37912026302
com.vmware.kext.vmioplug 3.0.0
com.vmware.kext.vmci 3.0.0
com.vmware.kext.vmx86 3.0.0
com.mcafee.kext.Virex 1.0.0d1
com.manycamllc.driver.ManyCamDriver 0.0.9
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AudioAUUC 1.57
com.apple.filesystems.ntfs 3.4
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.GeForce 6.3.6
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.driver.AppleUSBHub 4.2.4
com.apple.nvenet 2.0.17
com.apple.driver.AppleUSBOHCI 4.2.0
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.nvidia.nv50hal 6.3.6
com.apple.NVDAResman 6.3.6
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.NVSMU 2.2.7
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro5,1, BootROM MBP51.007E.B06, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.33f8
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS723232L9SA62, 298.09 GB
Serial ATA Device: MATSHITADVD-R UJ-868
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0x04600000 / 3
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06110000 / 5
I have no idea what any of this means, but if anyone does could you please help me in figuring out what is wrong here??
Thank you so much!
~MikeNope, it happened again about 2 minutes into playing Diablo 3, personally it feels like it is overheating, I feel as if the bottom of the Macbook is getting really hot very quickly.
Here is the updated crash report:
P.S. I have uninstalled VMWare, but it still appears in the crash report... not sure what else to do I cannot find anything about VMWare under the Computer search.
Interval Since Last Panic Report: 1636 sec
Panics Since Last Report: 1
Anonymous UUID: 7B2BFC9A-4351-4CC0-8A24-3F6077B1BD3F
Sat May 19 19:08:17 2012
panic(cpu 1 caller 0x58c8ec97): NVRM[0/2:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd4000000 0x597c7000 0x096380c1, D0, P3/4
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x51243888 : 0x21b837 (0x5dd7fc 0x512438bc 0x223ce1 0x0)
0x512438d8 : 0x58c8ec97 (0x58ea422c 0x58f14840 0x58eb2f88 0x0)
0x51243978 : 0x58da95db (0x7c4e804 0x747d004 0x100 0x2aa21d)
0x512439c8 : 0x58da05d4 (0x747d004 0x100 0x58217391 0x42)
0x512439f8 : 0x594dd7bb (0x747d004 0x100 0x4bcd2cee 0x5119f218)
0x51243b38 : 0x58dc8258 (0x747d004 0x747b004 0x0 0x0)
0x51243b78 : 0x58c97e2b (0x747d004 0x747b004 0x0 0x0)
0x51243c18 : 0x58c9450a (0x0 0x9 0x0 0x0)
0x51243dc8 : 0x58c963d9 (0x0 0x600d600d 0x702a 0x51243df8)
0x51243e98 : 0x58c2a582 (0xc1d0002f 0xaa910001 0x20802040 0x51243ee0)
0x51243ef8 : 0x50dae57d (0x7d3d400 0x51243f4c 0x0 0x7)
0x51243f58 : 0x50dae71a (0x7d40000 0x50db5e54 0x51243f78 0x2a45c9)
0x51243f78 : 0x230235 (0x7d40000 0x0 0x51243fc8 0x227cea)
0x51243fc8 : 0x2a179c (0x863ea0 0x0 0x10 0x0)
Kernel Extensions in backtrace (with dependencies):
com.apple.driver.AGPM(100.12.31)@0x50dab000->0x50db5fff
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x57ed1000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x57ef3000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x5111a000
com.apple.nvidia.nv50hal(6.3.6)@0x593b2000->0x597c6fff
dependency: com.apple.NVDAResman(6.3.6)@0x58c28000
com.apple.NVDAResman(6.3.6)@0x58c28000->0x58f15fff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x5111a000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x57ef3000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x57ed1000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacBookPro5,1 (Mac-F42D86C8)
System uptime in nanoseconds: 284952138421
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0x579c0000, size 0x12288) - last unloaded 229767652201
loaded kexts:
com.vmware.kext.vmnet 3.0.0 - last loaded 42448227803
com.vmware.kext.vmioplug 3.0.0
com.vmware.kext.vmci 3.0.0
com.vmware.kext.vmx86 3.0.0
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AGPM 100.12.31
com.apple.driver.AudioAUUC 1.57
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.nvenet 2.0.17
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AppleGraphicsControl 2.10.6
com.apple.GeForce 6.3.6
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.kext.AppleSMCLMU 1.5.2d10
com.apple.filesystems.ntfs 3.4
com.apple.driver.AppleUSBTCButtons 201.6
com.apple.driver.AppleUSBTCKeyboard 201.6
com.apple.driver.AppleIRController 303.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleUSBOHCI 4.2.0
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.AppleProfileFamily 41
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily 1.10
com.apple.driver.NVSMU 2.2.7
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.driver.AppleSMC 3.1.0d5
com.apple.nvidia.nv50hal 6.3.6
com.apple.NVDAResman 6.3.6
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.driver.AppleUSBMultitouch 207.7
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro5,1, BootROM MBP51.007E.B06, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.33f8
Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS723232L9SA62, 298.09 GB
Serial ATA Device: MATSHITADVD-R UJ-868
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06110000 / 3
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0x04600000 / 3
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 2
Any Ideas?? Thanks again!
~Mike -
Help figuring out how to tell if an object is within a dynamically made circle
Hello Everyone,
I am currently in the middle of working on a project but sadly I am having a bit of trouble getting a few things figured out.
Essentially what the project consists of is I have random balls appearing on the screen and moving around and I need to make it so that the user is able to draw a circle around the ball (may be more than one) and have that balls dissapear and count the number of balls circled.
This project is being done in flash builder 4.5 and is being made for the android platform as part of a senior project.
At this point this is where I am.. I have been able to randomly create the balls and give them a random movement. I have also been able to figure out how to allow the user to draw on the screen.
What I am trying to figure out is how to make it so that if the user draws a circle around the balls make it so that I know these balls have been circled and make them dissapear and have the number of balls inside the area calculated.
I have thought about making the entire background a grid and make it so that I can track somehow the line made by the user and then track the coordinate of the balls then if it is within that area it means that the ball has been circled but I would like something more efficient than that.
I apologize if it is unclear for what I am looking for but a simple description is I am making a simple game where you are able to circle a moving item on screen, then once it is circled the item disappearsand you gain a point.
Any help would be greatly appreciated.that's non-trivial. just determining if your user drew a closed curve is non-trivial. then deciding what's inside and what's outside that curve is non-trivial.
that's not to say it can't be done or even, that it can't be done with flash. it can. but you're not going to get a short paragraph answer to this one unless there are significant assumptions you can use to simplify the problem. -
I need some help figuring out why parts of my form don't work
I have built a couple forms to use with my work, the first 1 is a write up sheet that I fill out while on a field job. When complete, I have an insert button that inserts times, dates customer info and employee info into a MYSQL database that is pertinent to the second form which is a standard type timecard. It is with the timecard form that I am having problems. On the timecard form I have a radio button list with seven buttons (1 for each "start/stop" row of the timecard) when I click a button it makes a subform on the second page visible that allows me to insert the data from my database into the start/stop field of the timecard. I used the action builder to make these subforms visable and invisible and this all works except for 1. Also one of the subforms won't insert the data. I can't for the life of me figure out why, I have gone over both problems and don't see anything to cause it. I was hoping that I could upload my form and database somewhere and have somebody look it over, maybe I have overlooked something but at this point I have studied the problems for 3 days and haven't figured either out. any help would be greatly appreciated
ThanksYes, after the last iOS. So is that different than the App update I just did through the app store? Or is there a different version app that I need to go download again?
-
I need help figuring out GRUB [SOLVED]
So, I'm having a bit of trouble figuring out how grub's menu.lst should be configured on my system. I've scoured the internet and wiki, but I can't quite get it. Hopefully you can help me!
Here's some info:
joe@Snow-Crash:~$ sudo fdisk -l
[sudo] password for joe:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x1e721e72
Device Boot Start End Blocks Id System
/dev/sda1 1 16554 132969973+ 83 Linux
/dev/sda2 * 16555 19104 20482875 83 Linux
/dev/sda3 19105 19457 2835472+ 5 Extended
/dev/sda5 19105 19457 2835441 82 Linux swap / Solaris
I have HH 8.04 on my main partition [sda1], and I'm trying to put Arch on my 20gb sda2 partition. I followed the beginner's guide up to the install grub section. When it had me review menu.lst the pertinent Arch section was
"title Arch Linux
root (hd0,0)
kernel /vmlinuz26 root=/dev/hda3 ro
initrd /kernel26.img"
Now, I was planning on just copying this bit and pasting it into HH's menu.lst (and not installing grub in arch's partition), but I thought that it didn't seem quite right. It turns out I was right, since I get an "error 15: File not found" when I choose to boot Arch.
So what should it be? This is how I understand it, in my admittedly newbie way.
Am I mistaken in that it should be "root (hd0,0)" Since the root command points to where grub is residing (and I'm using HH's grub in sda1)?
And "kernel (hd0,1)/vmlinuz26 root=/dev/sda2" Since I need to designate that the kernel is on a different partition than (hd0,0), and my Arch partition is sda2?
and as far as I can tell it should be "initrd (hd0,1)/kernel26.img" since it's on a different partition.
I know I'm doing something wrong here, since I still get the same "file not found" error message. Can someone point out the error in my ways?
PS: Since I was having trouble with this I decided to try to to install GRUB in sda2 and use chainloader to point to it from HH's menu.lst. But when I tried to install grub via my Arch cd it gave me a generic "unable to install Grub" message. So I'm up a creek!
I hope you guys can help me out! Thanks.
Last edited by Joe_Arch (2008-11-27 07:51:13)Welcome Joe_Arch,
You have to set the root to the partition that contains the "OS image" (the kernel). Also, you apparently don't have a separate /boot partition, so you have to add /boot/ to the beginning of the file names.
root (hd0,1)
kernel /boot/vmlinuz26 root=/dev/sda2 ro
initrd /boot/kernel26.img -
Help Figuring Out Project Settings?
I have footage from 2 different cameras. I think the cameramen just aren't too sure what they're talking about when it comes to the formats shot in, which in turn leave me a bit confused.
I was editing with HDV 1080p 25fps settings pretty fine, until I decided to replace a clip with an AE composition, and the next day playback became choppy for me. In trying to figure out what was wrong, I realized the clips for both cameras were saying 29.9 in premiere even though my cameraman said it was shot @ 25 fps on the Sony cam. So I am taking a guess here in saying I should probably be editing with project settings to match that 29/30 FPS, right?
Using mediainfo I am also seeing that the footage is 1080i, so should my project settings for these clips be HDV 1080i(60)? Any more info I can provide if needed, but I am already in a bind having to start this project over, but I am confused as to why I was getting playback just fine and then another day no matter what settings I used HDV playback got choppy. Currently re-installing CS4. Any help greatly appreciated as I am still new to this.Yeah I was told it was done at 25fps, and that the Sony camera had 25, not 24 and that is very well an option in Premiere, but I'm guessing Mediainfo is a lot better to decide what to do it in. Just finished installing premiere again (I assume that will help with my stuttering in playback) and am going with HDV 1080i30 (60i) since that gives me 29.9 fps and well, 1080i instead of p. I tend to get overly worried about these things. I hope this is the right thing to use. I appreciate your feedback.
Not sure if this is relevant, but one camera gives me mpegs while the rest of footage is MP4. -
Need Help figuring out security sandbox issue after changing webhost
I'm in the process of switching my webhost from 1&1 shared hosting to a dedicated IP address with a smaller company that specializes in Drupal sites and doesn't know much about flash.
1&1 is still the Registrar for my domain, but I've 'parked' YourGods.com on the Holistic servers and have 'pointed' my site to the Holistic DomainNameServers instead of the 1&1 servers.
After doing this, my Flash site (which is based on the Gaia framework) stopped working, and the Flashplayer Debugger, gave me the following errors:
Error: Failed to load policy file from xmlsocket://127.0.0.1:5800
Error: Request for resource at xmlsocket://127.0.0.1:5800 by requestor from http://www.yourgods.com/bin/main.swf has failed because the server cannot be reached.
*** Security Sandbox Violation ***
Connection to 127.0.0.1:5800 halted - not permitted from http://www.yourgods.com/bin/main.swf
Someone helping me on another thread thought 127.0.0.1:5800 might mean the problem had to do with my paths and that I was trying to access something on my local computer, as opposed to being a standard cross-domain issue where one server was trying to access files on another, unrelated server.
Can someone clarify this?
I Googled 127.0.0.1:5800 and found some stuff about loops between a server and the originating computer but I'm really not sure how to put all of this together.
Is there a way (with the flash debugger or other software) to step through my actionscript code with periodic breakpoints so I can figure out what line is causing the problem?
Or a way to figure out if this is a problem between Holistic and my local computer or Holistic and the 1&1 web servers?
Thanks for any help.Thanks Josh.
I finally tracked this down last night with help from the folks at actionscript.org. I hadn't deactivated my Debugger which runs off of a desktop AIR application - so the server was trying to reach my localhost to run its trace statements. Deactivating the Debugger fixed the problem. -
Help figuring out ClassCastException
I inherited an unfinished (undocumented and uncommented) program from another programmer (now gone), and I'm trying to figure out a ClassCastException that gets thrown at runtime.
The program contains a lot of custom classes for table manipulation. The two key classes here are TableIndex, and TableSorter. Their inheritance hierarchy is as follows:
TableSorter extends TableMap
TableMap extends AbstractTableModel
AbstractTableModel implements TableModel
TableIndex implements TableModel.
At some point, a JTable is created that has a TableIndex as it's model:
TableIndex ti = new TableIndex();
JTable table = new JTable(ti);Later on, this call is made, and it throws a ClassCastException:
(TableSorter) table.getModel();table.getModel() returns a TableIndex, which is being (illegally) cast to a TableSorter. Looking up the inheritance chain, both TableIndex and TableSorter are derived from TableModel. Why, then, is this not working? Is this problem because both classes are not extended from the same superclass? Can someone tell me where the break is?a cast doesnt convert the programm, it only "unhides" methods which the static type hides.
every class extends object, hence you can always write Object o = new Bleh();
however you can only access the methods declared in object on o. if you cast it to (Bleh) all the additional methods you wrote come available(they were always there, you just hid them)
now if you have another class Blub, and you attempt to do (Blub)o, you will get an error, since o isnt of the type Blub(its Bleh). you will get an error, since o cant offer you all the methods you declared in Blub.
in your particular case TableIndex would hav to extend TableSorter in order for this cast to work. -
Need Help figuring out a percentage formula
Hi, I have a simple percentage formula that i' struggling to figure out.
I need a formula to work out what A7 is as a percentage of the figure in B4. So in other words what 54.66% of £1998.14 is. Does anyone know how to do this?
I need to use the percentage in A7 as part of the formula as the percentage is updated automatically when other values are changed.
The screenshot is below and a link to the screenshot is here in case yo can't see it: https://www.dropbox.com/s/2ji7qdxmh4ymkby/Screen%20shot%202014-10-04%20at%2012.2 2.34.jpg?dl=0
ThanksHi alierrett,
Check here:
Simple Percentage Formula Help
It will work in '09 too.
quinn -
Need Help Figuring Out an Icon
Hello,
I am using a template and I see the following icons next to the comp icon - can you please help me figure out what they are?
Thank you!One layer is being used as a track matte for another layer. Read up on Track Mattes here.
Track Mattes are one of the very basic things you should know about working with AE. If you don't know what they are, there must be a TON of other useful things you've missed. I would highly recommend that you go through these resources before you do much more in AE. It will help you work with a lot less frustration.
Maybe you are looking for
-
How to check if the retro period is from 01 or earlier in PCR
Dear All, How to check in the PCR if the retro for the employee is starting from the previous year or from the period 01 of this year. The PCR in the system is as below: I wanted to execute some PCR only if the retro period is from 01 of current year
-
How to read variable file name into ODI
Hello everyone, I apologize in advance if this has already been answered - I've done searches both on Google and this OTN area and have not found an answer to my query. I would like to do the following via ODI: 1) rename a file in a specific director
-
Hi, I have to display some information in a status bar within an applet. I have two question for it. 1. Can an Applet could have its own status bar? 2. When this applet would be running in a browser, the information i would be displaying on Applet's
-
Subsequent use of cumulated value in query
Hi All, We are using BEx Query Designer to create a query having one formula variable Stock on Hand as a cumulated value (along the columns).Now we need to use this cumulated value in another formula variable. Is this possible to do? If not could y
-
L9 does not show my MPC (and other) Groove Templates?!
hey all When i open a project from L8 (that had all my groove quantizes on it) in L9, they do not show any ideas?