Help files missing after upgrade to PS CS5
Upgraded from CS4 to CS5... reinstalled in a second time... still unable to load help files... second install, same messages saying ...AIR, Media Player and Help did not install...
Help files in Lightroom 3 also did not load..
Solved problem by finding a folder in CS5 Photoshop set up files.. under the folder payloads.. and installing setup file for Adobe Help from there.. also installed updates from Adobes website for Media Player and Air
Similar Messages
-
Help files missing after upgrade to Lightroom 3
Dowloaded the upgrade, installed it, reinstalled it... help files missing... message is .. Cannot display help..
Use Lightroom 3 on Win 7 professional at 64bit...
Please help...Solved problem by finding a folder in CS5 Photoshop set up files.. under the folder payloads.. and installing setup file for Adobe Help from there.. also installed updates from Adobes website for Media Player and Air...
-
Itunes help file missing after 10.5 upgrade - Help!
upgrade itunes to 10.5 through auto updater... and now there is no help funtion. Just a message about missing URL. I am of course online and all other sites work. How can they screw-up an upgrade like this! Now I waste my Sunday trawling the forums.
Have you looked directly in the folder Library/Fonts to make sure the font is really missing (and you are not just getting a bad message from iWeb)? If you open TextEdit and do Format > Font > Show Fonts, is this font really missing from the list?
-
Hundreds of files "missing" after upgrade?
After I upgraded to the new iTunes, there are hundreds of files that are marked with the exclamation point, and it says they can't be located. I tried following the instructions on the support site to replace my library file with a previous one, but that didn't work. I tried re-copying my music files into my iTunes music folder, and I see the files there, but that still didn't help. I can double-click on each and tell it to locate the file, and I find it and replace the one that's there. It works for that individual song, and then I get the option to look in the same location for the other files, but it always says that none of them could be found (they're all right there). Is there any way to avoid doing this individually for a few hundred songs? And whyyyyy did iTunes screw up my whole library after the upgrade? So frustrating. I want to go back to when it worked...
You get exclamation marks or dead tracks because iTunes can’t find the file. This can happen for a number of reasons:
The song file or a folder in its path was renamed
The song file or the folder it is in has been moved
The song file has been deleted
The device containing the song files e.g. external drive is not accessible or the drive letter has changed.
I can't tell you why it happened in your case.
DO you have your music library on an external drive? Things can go wrong if you start iTunes with it unplugged.
Anyway one thing you can do if all your tracks are bad is to drag iTunes library.it from your music folder to the desk top and then start iTunes. iTunes will create an empty library. Now youn can add your iTunes Media folder. This loses counts, ratings an play lists but it is quick.
If you don't like that, Something you can do to figure out what went wrong is to open iTunes Library.xml with WordPad.
Look for lines starting <key>Location</key>
These contain the paths to files, note that spaces are replaced by %20.
By inspecting these it may be possible to figure out what went wrong and fix it.
You may need to make file extensions visible to identify itl and xml files.
Message was edited by: polydorus -
Tool generated files missing after upgrade to Oracle Workshop for Weblogic
Hi,
I'm trying to migrate a beehive/netui web-application from Bea Workspace Studio 1.1 to Oracle Workshop for WebLogic 10R3. The application builds successfully, but when I access the application, I get a "Missing Struts Module Configuration" error.
I checked the build folder, and discovered that several tool-generated files where missing. Entire _pageflow folder is missing and all of the controls related files are missing.
Anyone have an idea of what is going on here?
RuneRune,
Could you provide details on the migration process you followed ?
Also are you trying to develop and deploy against WLS 10.3 ?
-Raj -
Top menu bar is missing after upgrading to yosemite
Top menu bar is missing after upgrading to yosemite
The Library file has been hidden for some time now. So not surprised you are confused upgrading from Snow leopard.
The easiest way to view this folder is to use the Go menu and press the alt key. This exposes the folder in the list.
Hope this helps.
PJRS -
BB App World Icon Missing After Upgrading to OS 4.0.0.65
Hi,
i'm using blackberry bold 9780.
after upgrading to OS 4.0.0.65 my BB app world was missing. i have tried to reboot and re-install the app world but it doesn't work...
appreciate that someone can resolve this..
Solved!
Go to Solution.Hi liedia
Welcome to BlackBerry Support Forums
Try this Knowledge Base :
KB29422 BlackBerry App World icon is missing after upgrading to BlackBerry App World 4.0.0.63 to 4.0.0.65
In addition who is your Carrier ? please edit your profile and remove your mobile number .
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
CS5 - Local Help Files missing
While I was without internet recently, I was unable to browse local help files for Photoshop and Flash Catalyst in my new copy of Creative Suite 5
- Design premium.
I wa prompted to set preferences to browse offline help, and that did not working. Poking around in the actual folders showed me there were missing help files!
Also, the help files I did have all had the word "DRAF" in red at the top! Pretty poor quality control!
Where can I get the updated help files?i too have the same problem for my cs5 master collection.
there are no help files
the error says to reinstall the whole software.
i tried reinstalling but the help files are still not there
pls help -
10.9 Server mail public folders missing after upgrade cannot get them back HELP
Help after upgrade my public folders dissapeared when using the same configuration used in previous ML server Mail would not work
Help Please.Did you enable the ACL plugin (per instructions above) ?
create an ACL file
/Library/Server/Mail/Data/mail/public/dovecot-acl
with the contents something like this:
user=jeff lrwstipekxa
authenticated lri
This would give user jeff full access
authenticated users could drop files, but not read
Thats just an example.
Read-up on it here
http://wiki.dovecot.org/ACL
Make sure you give each subfolder an ACL.
Once setup, new folders created via imap will inherit the ACL from parent. -
Uninstalling PS CS4 Extended after upgrading to PS CS5 Extended
I finally acclimated to my upgraded to PS CS5 Extended after transferring over presets, brushes, actions, etc and decided to uninstall CS4. Of course now when I open CS5, I receive an error message indicating the some of the support files are missing and I need to reinstall PS CS5. Since this was an upgrade from CS4 that is no longer on the computer, do I need to reinstall CS4 and then reinstall the upgrade to CS5? Or is there a way to simply reinstall CS5 and be done with it? Since this was an upgrade purchased via download, and I deleted the disk image, where do I find the download for the upgrade? Any help or suggestions are much appreciated.
All Adobe updates are full installers.
If the update installer does not find a qualifying prior version installed, it will simply prompt you for the old serial number as well as the new one. -
Hey guys, can't find help anywhere so I am asking here. I work for a small tv station who recently purchased Flash Professional to learn. They want me to learn it and create some animation for bumpers yadda yadda. Anyways here's the problem. Every time I install it it seems fine and works for a couple of days. Suddenly one day it won't open and all it says in the message is "flashresource file missing. please reinstall flash " So I say uh oh and reinstall. Works great so I think ok problem solved. Then a couple of days later it does it again. I have gone through this 5 times, each time reinstalling works for a few days or week then blammo suddenly "flashresourcefile is missing. please reinstall flash" I am completely stumped. After effects, premiere pro, soundbooth, all work great. Flash professiional is the only one doing this. HELP!!
Macbook Pro intel i7
snow leopard osx
8gb RAM
64 bitHi there, do you happen to have CleanMyMac installed on your machine? I had same issue with my Flash CS5, problem was CleanMyMac was cleaning few extra things that require for flash to run.
Hope that helps! -
Access Sequence JEXC missing after upgrade to EHP7
Dear Experts,
we are facing an error while saving excise invoice through transaction J1IIN in development system after upgrade to EHP 7, Access sequence JEXC missing ( ) Message no. VE306, could you please suggest to find out solution.
Regards,
Amit AnasaneDear All,
Thanks for helping with your valuable suggestions, finally i got solution of it,
The root cause of this problem was the change in the table T682I by theEHP7 upgrade.The fields KOTABNR has been changed from NUMC(3) to CHAR(3).With NUMC type the wrong statement works anyway.With CHAR type it retrieves no records. thus creating this error message, so it was a pure ABAP programming error. i am closing this discussion once again thanks to all.
Regards,
Amit Anasane -
BACK UP DATA MISSING AFTER UPGRADE
Hello again
I am posting again my problem , maybe this time I can get some more help..
I was using an older Itunes and 4.1 os on Iphone. I backed up iphone and restored it (TWICE) to check for data and eveything was there, after upgrading Itunes and OS to 5.0.1 , I tried to restore from the Previous Backup but lots of data was missing (contacts, pix,videos,songs,passwords) . What happened here ?
I found 4 backup folders with dates : 20/jan/2012 (1 folder ) , 23/jan/2012 (2 folders) and 26/jan/2012 (1folder) <---date of upgrade.
(I forgot to mention that when i was upgrading the OS , I wasn't prompted to do anything by Itunes, Itunes upgraded and backed up the phone automatically.)
I looked inside those folders and found out that the folders from 20/jan and 23/jan contain identical info. but the one from 26/jan is different !!!!!
1)does that mean that the original backed up info is still there but not ported over to the new OS ?!!!
2)Is there anything in particular that I should look for in the backup folders ?
3)assuming the original backed up data is still there , how do we make sure it is completely transfered to the new OS ?
RegardsThat sounds like a more complicated problem within PC Suite...Maybe you should contact Nokia directly to see if they can come up with a solution for this.
www.europe.nokia.com/contactus
There you´ll find a detailed selection of your country.
Don´t forget to keep us informed on this!
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good. -
Can`t save numbers files anymore after upgrading to mac os x lion
i am dumbstruck.
right after upgrading my snow leopard system to the new mac os x lion i am not able to save old files of Numbers any longer.
i was about to update a file and it says that the permissions wouldn`t fit.
but even when i change all the permissions to 777 to problem persists.
any clue whats going on here? apple?!
thanks for hints or help!hey -mvimp and thanks for your reply,
meanwhile i uninstalled numbers and reinstalled it.
still had the problem with the old files, but now i could somehow make a duplicate (copy) of the file under discussion and save it back to disk. so i am at least able to continue with older files.
strange effect this lion upgrade has ... -
User account missing after upgrade to Yosemite?
I have a mid-2010 iMac which up until recently I had two user accounts on for general use and one for music (Garageband, Logic and audio files etc). After upgrading to Yosemite, this separate user has vanished. I'm left with my original admin account, and a guest login. If I search for any of the files using spotlight, they do show up, but if I try to open them I get the message "you do not have permission to open this document". Also I had folders on the desktop of the music account which contained files, these folders show up in a search but are listed as empty? The files themselves are 'blank white sheet' icons as if they have no application.
I would assume this is a lost cause if not for the fact that my hard drive (more than half of which was taken up by the 'music' user) still reads as pretty much full up. So have I wiped all this forever?
Thanks in advance,
Daveretina MacBookPro mid2012. Clean install of OS X Yosemite 10.10
I'm randomly missing an account at login screen after reboot.
Sometimes I can fix it with booting into my initial account 'Kevin' (userid 501) and then changing to different login 'Christina' (userid 502).
But if I log out from my account, the second account is missing. Same if I do a reboot.. This have me in stitches as I ofcause has the need for privacy from each account.
Both accounts are set up as admins, guest is deactivated.
rMBP 16gb sep2012.
userid 501:
home directory: /Users/Kevin
userid 502:
home directory: /Users/Christina
apart from that... I have loads of problems with Bluetooth, and hand-off only working 1 way (5s with 8.1) where only iOS -> OS X works, not vice-versa.
Maybe you are looking for
-
Service Orders not displayed in Web Tools
Hello everyone, We are creating Service Type Orders within B1 and they are syncing over to Web Tools just fine, however they are not displayed on the Order History page for the user. Is that 'as designed'? I know there is no traditional information
-
Customizing Benefits and Payments iview in ESS Portal
Hi Guys ; I am working on ESS portal. I want to add new links and textviews in the Benefits and Payments iview. After adding them I want to rearrange their positions with respect to existing fields on the iview. I tried by opening the preview of ivie
-
Help with recurring paper jam on psc 2410
My printer is an HP psc 2410 all in one photosmart and I get a recurring paper jam. The paper stops feeding half way through and I get a message that the printer is out of paper. When I open the back, I see that the paper is half way through and I
-
I've opened a bug for this issue as well. I want to ask if anyone experiencing the same issue and has found a workaround. Basically Air Runtime is picking up the wrong launch image when launching on iPhone 6. It defaults to [email protected] instead
-
Rating is being applied to EVERYTHING, not just the active image- please help.
Seemingly out of nowhere a particular feature in LR stopped behaving the way it normally does for me. When I am in the Survey view (in the Library mode) and I have a number of images selected because I am trying to make my selections, it suddenly sta