Help finding the Best BIOS settings for P67A-C45 (2)

Hello again folks
I Have a P67A-C45 board with an Intel i5 [email protected] and 8Ghz DDR3@1600 of memory
I just want to know what are the best setiings to my system. I'm planning to make an overclock, but i don't know much about these.
My ram are at 1333 MHz. What's the problem????

Quote
My ram are at 1333 MHz. What's the problem?
Your CPU only natively supports up to 1333mhz memory. Your memory sticks, although rated to run up to DDR3-1600 speed, are only natively DDR3-1333.
Hence, if you have not applied any overclocks, and are running at default settings, the BIOS is reading the default native SPD setting for your memory, which will be DDR3-1333 settings. So no, there is no problem really. In order to run your sticks at their rated setting, you will need to overclock.
But, you might want to have a read of this:
https://forum-en.msi.com/index.php?topic=147704.0
If you have more questions about overclocking, then please ask them in the correct area of this forum (the Overclockers area), after first reading the >>Posting Guide<<

Similar Messages

Best BIOS settings for P67A-C45

Hello,
I have a P67A-C45 motherboard with an Intel [email protected] processor and 4 MB DDR3 1600 MHz.
Could you please tell me the best settings in the bios for this configuration?
What is the difference between the intel SVID or APS GreenPowerMode?
Thanks.

Here is a thread that may provide you with some guidance. https://forum-en.msi.com/index.php?topic=147300.0

BIOS settings for P67A-C45(2500k)

Hi, my CPU is underperforming a little in 3DMark and others suggested that something is wrong in my BIOS, so I post this to ask others with a similiar setup to post their BIOS settings.
So my GPU is getting a perfect score while my CPU is not (@ stock).
3DMark Vantage - ~14000-15000 CPU score (should be ~17000)
3DMark11 - ~5000 physics score (should be ~6600)
I have a Kingmax 4 GB and Kingston 4 GB RAM @1333 running in dual channel.
And pls no "if its good in games why care about 3DMark" crap. :P
Edit:
Win7 64 bit
Corsair HX650 PSU
ASUS Xonar DX sound card
ASUS ENGTX560 Ti DCII TOP
WD10EALX HDD
I have the latest CPU driver installed, the bios is not the latest though.

>>Posting Guide<<
Quote
3DMark11 - ~5000 physics score (should be ~6600)
Are you sure?
--> http://www.overclock.net/intel-cpus/940372-i5-2500k-low-3dmark11-score.html

What are the best sequence settings for a movie to be put on youtube?

I am making a video that consists of mainly jpegs and audio. The final movie needs to be crisp and fairly high resolution because the pictures have some house plans that need to be easily read.
I have tried the following settings only to get a blurry image result in the end:
Frame Size: 960x720 Aspect Ratio: HD (960x720) (16:9)
Pixel Aspect Ratio: NTSC - CCIR 601 DV 720X480
Editing Timebase: 29.97
Quicktime Video Settings:
Compressor DVCPRO50 - NTSC
Quality: 100%
This seems to me like it should be a crisp enough image result but the end result is very poor. When I use the H.264 Compressor instead of DVCPRO50 - NTSC, the image is much sharper but the faded transitions are sometimes choppy, and you have to render the timeline with each change you make. Please help me find the best overall settings for smooth editing and sharper image.
Thanks,
Caleb

Your settings -- between the Compressor, Pixel Aspect Ratio and Frame Size -- are oil-and-water.
If this is going to YouTube (meaning not going to be viewed on traditional TVs) and it's mainly Photos, try using this:
Frame Size: 1280x720
Aspect Ratio: HDTV 720p
Pixel Aspect Ratio: Square
Editing Timebase: 29.97
Compressor: Motion JPEG A
Quality: 100% (though in a lot of cases, you could drag this down to about 75-80% and quality will not suffer)
Unfortunately, you won't get much (if any) real-time effects. Unless, of course, you're on FCP 6 or later, where you can use a ProRes compressor instead. But with your signature saying 10.4. something, I wasn't sure if it was safe to assume that. The Motion-JPEG setting should work in all versions.

Best BIOS settings for Kt3 Ultra2 and Geforce4?

Hi,
Can someone tell me what the best BIOS settings would be for my KT3 Ultra2 running a Geforce4 ti4200?
I get crappy scores in 3dMark2001 SE and I have the infamous stuttering/crashing problems in 3D games. I've tried pretty much every configuration of settings and drivers I can think of.
I saw on these forums that the Kt3 Ultra2 can be a bit fussy with GF4 cards. If someone could post the best BIOS settings for performance and stability I'd be eternally grateful.
Alternatively, email me at [email protected] with them.
Thanks in advance

very very similar as far as i can make out

Need help finding the best Mac for gf

hi I need help finding the best desktop. I am looking to buy MAC for gf.
she uses final cut program question is does the GB/RAM/STORAGE matter on performance?
She has a 2009 Apple computer I want to upgrade her to a new one
I Dont know much when it comes to specs. She edits tons of videos and pictures.
what's recommended for a video/photo editor that's good in performance ?

Pro consumer might go with iMac even.
Final Cut Pro latest benefits from dual AMD graphics.
Video is one animal, graphics a much different.
Great site full of performance, buying and configuration ideas:
MacPerformance Go to the main topics
I think you need to get clear on budgets. start with mid range and add all the options and can spend $4,000 or $7,000.
Go to the Mac Store and do some looking and Google for reviews of software, hardware of course.
Barefeats
Rumors Pro
Visit the forum for FCP-X would be a place to start.
Final Cut Pro X

What is the Best Export settings for Uploading to Youtube?

Hi, Im kinda new to this can someone pls help me find the best video quality for uploading in youtube. SO when i xport media and choos h.264 and hten go to any other format other than widescreen high resolution preset all my titles becomes choppy but when i choose that preset it seems to be okay but the resolution on youtube does not go above 480p.
which format and preset combination do i choose in order to get on youtube 1080p without having my titles in the video all choppy?
If im missing any info pls let me know
Thanks

I find the YT presets work very well.
Choppy YT playback might be a poor Internet connection. Post a link, I'll check here.

What is the best export settings for mini DV?

Hi folks,
Love this forum, it has been a huge help for a novice. I am looking for answers to a more tailored question. I believe this will help others too!
What are the best export settings for mini DVs (now in mov format) for the following uses and how do I input these settings:
1. archive an exact duplicate without any quality loss of an imported mini DV tape. My goal is to have the best quality/duplicate archived digital version of the original mini DV tape for later editing/use?
2. the best quality version of the mini dv tape for viewing on media devices such as WDLive, boxee box, pivos xios, etc?
I really appreciate you reading and considering response.

First, I do NOT write back to tape... so only have a few saved links with no personal experience... but my "general" understanding is that you simply play your timeline with Firewire output active and press the record button on your tape deck
2nd, read below for a "trick" that is required to export to tape
Export to Tape http://forums.adobe.com/message/4699448
Hardware MPE must be OFF to be able to export via Firewire
http://forums.adobe.com/thread/902499
http://forums.adobe.com/thread/880824
Also CS6 http://forums.adobe.com/thread/1016269

What are the best optimization settings for Logic 9....

Hey guys,
I am running Logic 9 on a Macbook Pro 2.53GHz, Intel Core 2 Duo, 4GB RAM, OSX 10.6.4, with a AK1 soundcard. And I was wondering what the best optimization settings for this setup are?
I have been having a few issues with drop outs in sound during playback, which is also carried over when i bounce the audio. I did some research and found my latency settings needed to be higher, so I set the I/O buffer size to 512. I am also running all samples from the local hdd, I was thinking maybe put the samples on an external drive. I also changed Logic 9 to 64bit mode.
Does anyone know if this is right and anything else I need to do with Logic and/or the AK1??

First, return to 32-bit mode. 64 bit still has some ß-issues and some features that are not working/disabled, and the only perk of 64-bit is that Logic can adress more than 4 GB RAM, which you don't have anyway.
Samples on the startup drive is not a problem, unless you start using really big third party sample libraries, or zillions of EXS instruments. Some of the Logic content insists on residing on the startup disk anyway, better leave that where it is.
If you have an external, use that to store your Logic projects, or, in other words, make it your recording disk (as recordings are stored in the project folder). You do record audio too, I assume? Anyway, if you get an external, make it a FireWire one, not USB. FireWire is much easier on the CPU, and +for audio (and sample-) streaming+ more reliable and faster than USB.
If dropouts you hear during playback also show up in the (offline?) bounce, it is probably not a buffer issue, as the buffer is irrelevant for bouncing offline.
So how many tracks and what kind of tracks in this project? Which plugins and how many instances of them?

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

What are the best wireless settings for a WRT160N v2?

I am trying to find out what the best wireless settings are for the WRT160N v2 to have the best connection with my PC (WUSB600N) and my PS3 gaming console. Are there any suggestions on which channel I should be using, etc? My PC and PS3 are about 30ft from the router and unfortunately, I cannot move the router. I have really no obstructions from PC and PS3 to the router, but signal strength is low. If anyone can enlighten me, I would much appreciate it.
Thanks for your help!

Here are some settings which you can set on your Router, and i think this should solve all the problem. As this is the same settings which i have set on my Router and its working perfectly fine.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

CS3 - What Are the Best Export Settings for Animation?

I have edited a project in Premiere Pro CS3. It is animated, and I want to preserve as much of the quality of the animation as I can.
What are the best possible settings that I can use to export the video to a .MOV file?
A little background info, in case it helps:
The animations were created in After Effects, and the .MOV files were made with the Animation codec.
After editing in Premiere, I exported the finished file to the Animation codec. It looks so-so.
Important: I imported the Premiere Project into After Effects, and exported the project with After Effects. The After Effects Quicktime file looks better than the Premiere version of the Quicktime file. (And has a higher data rate, in case that matters.)
What kind of settings do I need to select in Premiere when I export the video to make the .MOV file look as good as it can?
(And please don't be afraid to dumb it down.)
Thx!

Try an Uncompressed "QT" file. (Component YUV - 10-bit)
BTW: Did your PPRO Settings match the AEFX Comp you exported from?

What are the best import settings for iTunes - AAC 160 / AAC 192 / MP3??

Hi I originally imported all my treasured CDs to iTunes several years ago, and they've served me well (AAC 128 - default setting) but in recent times hard-drive sizes have trebled and my much loved iTunes Library has not been updated.
I am thinking of re-importing all of my original CDs - as I think now that hard-drive space would allow for a higher quality but at the same time I do not want to fill my hard-drive completely with music - hence my question;
WHAT ARE THE BEST IMPORT SETTINGS CONSIDERING SIZE AND QUALITY?
(I know this has probably been asked a million times, but I did a search and nothing came up that answered my Q - also all the answers that came up in Google search where dated 2003/ 2004 - a little out-dated me thinks!!)
Rachael

Personally I've started ripping everything Apple Lossless. That way I hope I never have to rip again.
I used to rip 320 mp3. I couldn't tell the difference between 320 mp3 and lossless, but, one day I might be able to - big maybe. But since disk price is not likely to go up, I figured I'd rip lossless from now on "just in case."
Probably few, if any, people could tell the difference between 256 AAC and lossless (I've done it at 192, but never at 256, and I have not bothered trying again recently - there might be a song out there where I could hear the difference, hence ripping lossless from now on - my time costs more than disk space . . .)
256 AAC is a pretty safe bet, unless you need mp3 compatibility, then use 256 (or 320) mp3.

What is the best Compressor settings for burning a 2 hour DVD on single layer disc?

I have a 2 hour (120 minutes) project timeline which I want to encode in compressor to fit on a single layer DVD.
Do I need to change the Bit Rate to make it fit on a single layer?
Or can someone post the settings or link to where I can find the best settings?
Thanks in advance,
z

Select "Best 120 minutes" and you should be good to go.
x

What's the best security settings for publishing PDFs on the web while considering SEO still works

I want to protect my PDFs from people editing them and publishing them under their names, but I also want search engines to be able to scan it properly for SEO purposes. What's the best security settings to use for the PDF to accomplish both?
Thanks

I am currently using WD 2TB Thunderbolt hard drive for my iTunes, which i love and is works great. i am connected directly to my Mac Book Pro. I am running low on Memory and thinking of buying a bigger Hard drive. My question is should I buy 6TB thunderbolt HD or 6TB NAS drive to work solely for iTunes. I have home sharing enabled for my Apple TV
I also have my time capsule connected just as back up only.

Help finding the Best BIOS settings for P67A-C45 (2)

Similar Messages

Maybe you are looking for