Help!!! Firmware error on my MuVo2 FM (5.0

Hi,
I accidentally reload my firmware on my mp3 player.... now I cant even play my mp3 player = (
I cant seem to find the firmwave for my mp3 player to be install...
In addition, I do not have the installation disc with me (P.S: I am away from home for 2 years )
Is there a installation software online that I can download to save my mp3 player ?
Please advise to what I can do.
Zillions of thanks... appreciate a prompt reply...

I've had a similar problem.. Whenever I turn mine on now I just get a firmware error, so I've been looking for a firmware update so I can try and update my MuVo^2 FM but I can't find anything relating to this product anywhere.
Product support just said to update it with the firmware ... but I asked where to find it and they neglected to give me any information on file names and whereabouts
I've had to go back to using my discman. I spent $400 on this thing, I've had it two weeks, and now I can't use it

Similar Messages

Help: MuVo² 5 GB firmware error and connection proble

Thanks in advance to everybody reading this. I've searched through the forums for two hours and have not found a solution.
When started, my girlfriend's Muvo? 5 GB player only shows "firmware error" and switches to recovery mode. So I tried "Scan Disk", "Clean Up", "Format All" rebooting between each step. Nothing changed, so I downloaded the firmware "Creative MuVo? FM Firmware version .00.02". I could not find the exact firmware for the 5 GB player and read in the forum, that this version should work. When I chose "Reload Firmware" and attached the player via USB after I had been told to do so, my computer recognized the player. However when I tried to run the .exe file the setup told me "Your player is not connected, please connect your player."
I've tried it on four different computers and the same message keeps popping up. I'd be really grateful if anybody could help me out on this one. Thanks in advance.

luis bustamante-
Greetings and welcome.
Pull out both of those cards and see if you can boot.
It is most likely one of them or an externally connected peripheral.
Luck-
-DaddyPaycheck

Firmware Error, help please?

Well... I bought my mini in July. It was working fine until the other day when I connected it to the computer to update the songs. It suddenly had the folder and sad ipod error. I tried to restore it and it had the error, "Firmware error, cannot write to disk." I tried putting it in Disk Mode, it worked but I still can't update it. I can't start it either, I'm not sure if I should send it in or not.

Apparently, it sounds like there's a problem with your iPod's hard disk; honestly, I don't think there's anything at home you can do about it.
Send it in.

IPOD Firmware Error

I'm trying to restore/update my IPOD 20GB. (I bought it used from a friend who couldn't get it to work) After choosing restore factory settings it gives me an error that says "Firmware Failure. Disk Write Error" What can I do about this. Thanks for your help.
Jason

Jason,
These might help:
"Firmware update failure"
What to do if iPod can't be updated because firmware file was corrupt or not found
-Kylene

Firmware error for he muvo2FM pla

I bought the player from the store
when I already charge the battery and try to upload the music to the player
the problme is happen
it show the firmware error
and then go to the recovery page
I try formatting the disk
but it's not work
also clean up the disk
it doesn't work too
anyone can hlep me to solve it
I love that player and cost lots of money but now.......
my lovely player is down it
can anyone help me

Dear Jason-CL:
I have the same problem too.
Can you please help me to contact technician to send the fireware to my e-mail?
Also, I have a suggestion thatAll of we know that still haven?t any updated freware for MuVo^2 FMBut I found that some of user have the same problem showing the fireware errorI think the original version should be upload on the Internet instead everyone need to ask technician to send the file to usIt will save our time, prevent any no receive message and get us out of trouble. Do you think so?
Best Regards,Gary

Firmware error how my nano is'nt responing

my ipod wasnt updateding on itunes so i tried restroing it but it told my that there was firmware error and now it will not turn on.Can some please help me!!

hiya!
Jeff's got you covered. one additional note. if you're connecting to a Toshiba laptop, also see:
iPod not recognized correctly on Toshiba laptop
(... i wish there was a link from the main article on this error to the Toshiba article ...)
love, b

My Vision M has a "Firmware Error&quo

Whenever I turn it on, it goes straight to the recovery page after saying "Firmware Error". I'm thinking I should upload the firmware, but I'm not sure how to do that. If anyone knows, would you mind explaining please?
Thanks.

Hi there if you follow these instructions you should hopefully be able to update your firmware.
Click Support, this is found near the top of the page on the Orange toolbar
Click on auto update
You will now need to plug you player into your computer
Finally follow the on screen instructions and they will take you through until you have a choice of updates for your mp3 player, primarily look for the firmware upgrade and get that however when I upgraded my firmware I noticed a couple of other useful programmes so upgraded them at the same time.
There are some clearer instructions in this thread I have left as another solution
Zen Vision M and Windows Media Player Solution
If you copy the above text into the search bar of the discussion forums page you should be lead to it.
Hope this helps
Please reply and let me know how it goes

Ios5 upgrade fails with firmware error on my iPAD (original) - how can I fix this or return to ios 4?

I was offerered ios5 on my perfectly working iPAD yesterday - it failed and left the iPAD unusable
Failure occurs during the restoring: iPAD firmware - error is 1 unknown (log below), I'm using iTunes on Windows 7 and have tried iTunes on Vista - don't have a Mac to try.
Tried all suggestions on Apple support pages and completely different PC, sometimes get some USB errors but log below is most common issue.
Any suggestions - iPAD is now useless as stuck in recovery mode.
2011-10-15 23:49:57.726 [1732:1cc0]: restore library built Sep 14 2011 at 01:30:07
2011-10-15 23:49:57.742 [1732:1cc0]: iTunes: iTunes 10.5.0.142
2011-10-15 23:49:57.742 [1732:1cc0]: iTunes: Software payload version: 9A334
2011-10-15 23:50:05.661 [1732:1ad8]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#4e14bd0 4
2011-10-15 23:50:05.667 [1732:1ad8]: WinAMRestore::ProcessDevNodesChanges: device: 0x06531d48, notify: 2, connected: 1
2011-10-15 23:50:05.668 [1732:1ad8]: AppleDevice::NotifyDisconnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#4e14bd0 4, inst: 0x6531d48
2011-10-15 23:50:05.668 [1732:1ad8]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#4e14bd04, inst: 0x6531d48
2011-10-15 23:50:06.488 [1732:1ad8]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#4e14bd04
2011-10-15 23:50:06.500 [1732:1ad8]: WinAMRestore::ProcessDevNodesChanges: device: 0x06531d48, notify: 2, connected: 0
2011-10-15 23:50:13.147 [1732:1ad8]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#4e14bd0 4
2011-10-15 23:50:13.147 [1732:1ad8]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#4e14bd0 4
2011-10-15 23:50:13.419 [1732:1ad8]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-10-15 23:50:13.632 [1732:1ad8]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-10-15 23:50:13.913 [1732:1ad8]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-10-15 23:50:14.735 [1732:1ad8]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-10-15 23:50:15.168 [1732:1ad8]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-10-15 23:50:15.175 [1732:1ad8]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2011-10-15 23:50:15.175 [1732:1ad8]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#4e14bd0 4, inst: 0x6531d48
2011-10-15 23:50:15.175 [1732:1ad8]: WinAMRestore::ProcessDevNodesChanges: device: 0x06531d48, notify: 1, connected: 0
2011-10-15 23:50:15.175 [1732:1ad8]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 1
2011-10-15 23:50:15.175 [1732:1ad8]: AppleDevice::NotifyConnect: Interfaces total != arrived, no notification
2011-10-15 23:50:16.844 [1732:1ad8]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#4e14bd04
2011-10-15 23:50:16.844 [1732:1ad8]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#4e14bd04
2011-10-15 23:50:17.025 [1732:1ad8]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-10-15 23:50:17.121 [1732:1ad8]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-10-15 23:50:17.315 [1732:1ad8]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-10-15 23:50:17.418 [1732:1ad8]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-10-15 23:50:17.599 [1732:1ad8]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-10-15 23:50:17.609 [1732:1ad8]: WinAMRestore::AddAppleDeviceToDeviceList, device already connected, new interface
2011-10-15 23:50:17.609 [1732:1ad8]: AppleDevice::SetDeviceID: AMD_INTERFACE_DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#4e14bd04, inst: 0x6531d48
2011-10-15 23:50:17.609 [1732:1ad8]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#4e14bd04, inst: 0x6531d48
2011-10-15 23:50:17.609 [1732:1ad8]: WinAMRestore::ProcessDevNodesChanges: device: 0x06531d48, notify: 1, connected: 1
2011-10-15 23:50:17.609 [1732:1ad8]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 2
2011-10-15 23:50:17.610 [1732:1ad8]: AppleDevice::NotifyConnect: IBOOT, IBOOT \\?\USB#VID_05AC&PID_1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#4e14bd0 4, inst: 0x6531d48
2011-10-15 23:50:17.611 [1732:1ad8]: IBOOT, DFU \\?\USB#VID_05AC&PID_1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#4e14bd04, inst: 0x6531d48
2011-10-15 23:50:17.641 [1732:1cc0]: iTunes: SCEP 2
2011-10-15 23:50:17.641 [1732:1cc0]: _AMRecoveryModeDeviceFinalize: 00B51CA0
2011-10-15 23:50:31.856 [1732:1b60]: iTunes: Specifying UOI boot image
2011-10-15 23:50:31.882 [1732:1b60]: requested restore behavior: Erase
2011-10-15 23:50:31.887 [1732:1b60]: *** UUID 82A36050-9DD5-524C-B3C2-1C6DB6F383B0 ***
2011-10-15 23:50:31.912 [1732:1b60]: amai: AMAuthInstallDebugWriteObject: debug object written: C:\Users\rjm\AppData\Local\Temp\PerA75A.tmp\amai\debug\tss-request.plist
2011-10-15 23:50:32.940 [1732:1b60]: amai: tss_submit_job: HttpQueryInfo returned 200
2011-10-15 23:50:33.922 [1732:1b60]: amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.0.0)
2011-10-15 23:50:33.982 [1732:1b60]: amai: AMAuthInstallDebugWriteObject: debug object written: C:\Users\rjm\AppData\Local\Temp\PerA75A.tmp\amai\debug\tss-response.plist
2011-10-15 23:50:35.077 [1732:1b60]: amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "KernelCache" has been previously personalized; skipping it
2011-10-15 23:50:35.129 [1732:1b60]: amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "DeviceTree" has been previously personalized; skipping it
2011-10-15 23:50:35.146 [1732:1b60]: amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "AppleLogo" has been previously personalized; skipping it
2011-10-15 23:50:35.587 [1732:1cc0]: iTunes: Restore error 20000

Just to conclude, and give hope for any still suffering, I succesfully upgraded my iPAD to ios5 yesterday evening.
I did have a conversation with Apple support a couple of days agao, in line with many others I was given various reasons why things oustide the Apple environment might be the root cause such as
- ports blocked on the network I was using (although when I asked which ones they weren't certain - "80 and 442 we think" was the response
- a fault on the iPAD
- slow network connection
The more interesting part of teh conversation was Apple was that the firmware update part of the install actually involves quite a lot of interaction with apple servers. My conclusion would be that the well documented performance problems in the early days after ios5 release were the root cause of my problem - reference to network ports. iPAD faults were just a smokescreen.
My key learning - don't upgrade soon after a major release, I already knew this but when offered an update I didn't go back and check precisley when it had been released so I should have paid more attention :-)

Help with error 16820

help with error 16820 with trying to update acrobat

Please refer to following links, might be helpful.
http://answers.acrobatusers.com/While-updating-acrobat-error-code-showd-16820-solve-q7115. aspx
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/acrobat-co m-will-not-update-getting-error-16820/7bbbef64-df3e-4fbd-b552-fc1c7a5983c3?msgId=dcf838d8- a198-4a3a-b034-94a07c2e8648
If this doesn't work, we need more information here.

Zen Firmware error mess

Basically my zen keeps coming up with the error message "firmware error", then boots to the recovery mode screen. Ive tried reinstalling the firmware but as it finishes updating it says "update failed". So im kinda stuck and no clue what to do ;[

format the player then try to do it.

RoboHelp Server 7 Help System Errors

Whenever I publish my RH 7 Help project to server, I check
the RoboHelp Server Web Administrator for errors. I always get Help
System Error "Requested file cannot be found" for a file called
bsscfp.txt. To my knowledge, this is a control file generated
during the publishing process. If this is the case why is an error
being generated for a file I have no control over? Also, I find the
Troubleshooting section of RoboHelp Server Web Administrator to be
rather useless in correcting issues. Is there any reference
documentation that explains some of the cryptic error messages that
appear in the Server Web Administrator screen?

Hi, ouque and welcome to the forum.
Just to clarify your setup. When you say "Project pane" are
you referring to the Configuration Manager on the server itself.
Or, are you referring to something you are seeing from the RoboHelp
authoring client app's Server Administration pane?
If you have access to the actual server desktop and view the
Configuration Manager, sometimes on a new installation, you can do
a "refresh" and the project will show up.
A few more questions:
Have you tried accessing the website and does the project
come up in the web browser?
On what kind of web server did you install RHS7? Windows
2003, etc.?
Is Microsoft Indexing Services turned on?
Apparently you were able to successfully publish your project
to the server so there is "communication" between your desktop and
the server I gather.
A few more details and we'll try to help.
Thanx,
john

Firmware error

Just got a replacement mini back. Previous one stopped adding music after 3 months and said firmware error. Hooked this new one up. Went to 2005-06-26 and hit restore to convert the mini over to PC format. Update gives me "Firmware update failure. Disk write error" and mini is now at Folder! Tried reset with the hold-menu-select method and it lets me try to restore again, but gives the same old error when I do. DOn't even have the plastic off this one. Is it a return to Apple?

No, Not Yet David.
b Here's a link about the " Firmware update failure. Disk write error". :
* http://docs.info.apple.com/article.html?artnum=300969
Good Luck.

Search help: Internal Error.

Hi,
I am getting information message : 'Search help: Internal Error' after incorporating code in RETURN event. My aim was to populate the value from Hit list to Value with restriction field and then by removing some search select criteria, again display the hit list. It is coming back to the value with restriction field screen also populating the fields properly, below 1 information message is coming 'Search help: Internal Error'. If I remove some field from selection and again press the go button, it is doing nothing and system is hanging. The details are given below.
I have created one search help ZTMVGR1 having the following details:
Search help type : Elementary.
Selection Method : MVKE
Search help exit: ZF4_MATGRP_EXIT1.
Display value with restrictions : A
Field          Import           EXPORT   LPOS      SPOS   SDis     Data Element
MATNR       X                   X              5             5                     MATNR
VKORG      X                   X              1              1                     VKORG
VTWEG      X                   X              2              2                     VTWEG
MVGR1      X                   X               3             3                      MVGR1
KONDM      X                   X               4             4                      KONDM
MAKTX      X                   X               6              0                     MAKTX
In the search help exit ZF4_MATGRP_EXIT1 I have used three events:
1) PRESEL : Purpose of using this was I was not able to see F4 help for few fields in value with restriction screen . I found out that in SHLP-INTERFACE-F4FIELD is equal to 'X', sometimes in search help if that field's value is 'X' , F4 help does not come even if check table exists for that field.
2) DISP : Purpose, I want to fetch material description field in exit only. MAKTX does not exist in MVKE, so either I need to create a view containing all my fields, or populate the one which is not there in selection method in exit.
3) Return : Purpose, I want to put VKORG, VTWEG and MATNR ( MATNR has collective search help, based on material description , we can put material ) . The hit list we get contains VKORG, VTWEG, MATNR, KONDM, MVGR1 and MAKTX. When we double click on hitlist the value returns , I want to populate these entries in value with restriction field. So KONDM and MVGR1 field will be populated. Now I will remove the value of material-low from selection screen and find out for VKORG, VTWEG and MVGR1/KONDM what materials are there. But after writing the code for event RETURN I am getting information message 'Search Help: Internal Error'.
My code snippet is given below.
<removed by moderator>
Moderator message: please post only relevant code parts, your posts must contain less than 5000 characters to preserve formatting.
Edited by: Thomas Zloch on May 13, 2011 1:35 PM

HI,
In search help exit you need to use the below mentioned function modules
'F4UT_PARAMETER_ALLOCATE'          For allocating fields
'F4UT_PARAMETER_VALUE_GET'       Get Value
'F4UT_PARAMETER_RESULTS_PUT'     put Value
In the same order.
Thanks & regards,
Bhargav.

Please Help - "page error" / a system error occurred

I am very basic with Coldfusion Developed websites and pretty awesome on HTML and PHP. While working on a website I made an HTML change and added a line to a page. All works well on the test website/server but after uploading the changed page the page went offline/errored a day later.
I have an error receipt and am hoping to resolve this issue with some insight from a good Coldfusion Developer or Programmer.
PLEASE HELP, see error below.
A system error occurred: http://www.mix.co.zm/mix_schools.cfm?
Error - struct
Detail    Note: If you wish to use an absolute template path (for example, template="/mypath/index.cfm") with CFINCLUDE, you must create a mapping for the path using the ColdFusion Administrator. Or, you can use per-application settings to specify mappings specific to this application by specifying a mappings struct to THIS.mappings in Application.cfc. <br> Using relative paths (for example, template="index.cfm" or template="../index.cfm") does not require the creation of any special mappings. It is therefore recommended that you use relative paths with CFINCLUDE whenever possible.
Message    Could not find the included template components/mix_documents2.cfm.
MissingFileName    components/mix_documents2.cfm
StackTrace    coldfusion.tagext.lang.IncludeTag$NoSuchIncludeTemplateException: Could not find the included template components/mix_documents2.cfm. at coldfusion.tagext.lang.IncludeTag.setTemplate(IncludeTag.java:349) at cfmix_schools2ecfm527774291.runPage(D:\hshome\mixnet\mix.co.zm\mix_schools.cfm:15) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:360) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:94) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:79) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62) at coldfusion.CfmServlet.service(CfmServlet.java:200) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at com.intergral.fusionreactor.filter.FusionReactorFilter.i(FusionReactorFilter.java:566) at com.intergral.fusionreactor.filter.FusionReactorFilter.c(FusionReactorFilter.java:258) at com.intergral.fusionreactor.filter.FusionReactorFilter.doFilter(FusionReactorFilter.java: 164) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
TagContext    Error - array
1    Error - struct
COLUMN    0
ID    CFINCLUDE
LINE    15
RAW_TRACE    at cfmix_schools2ecfm527774291.runPage(D:\hshome\mixnet\mix.co.zm\mix_schools.cfm:15)
TEMPLATE    D:\hshome\mixnet\mix.co.zm\mix_schools.cfm
TYPE    CFML
TagName    CFINCLUDE
Type    MissingInclude

With LR closed move the preferences file to the Trash as described at the below link. You will lose your Preferences settings, so you may want to record them if unsure what you have changed from the default settings.
http://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom
DO NOT RESTART LR!
Next uninstall LR and then completely shutdown your system and turn the power OFF. Your catlog(s) will not be removed, so no worries.
Restart your system and reinstall LR using the latest version download available (LR5.4, LR4.4).
What version of LR and OS X are you using?

My macbook pro intel core duo 2 keeps restarting intermittenly. Help with error code.

I have run a Hardware Test, and it gives the follwing error code. Can anyone tell me what this is? I recently had my logic board replaced within the last 3 months, so it shouldn't be a problem there.
Thank you very much for any and all help.
Error code:
4SNS/I/40000000:TGOH-128.00

Online references possible memory issue? Sensors?
https://discussions.apple.com/thread/3140607?start=0&tstart=0
Keep taking it back and they keep switching parts until the problem is gone.

Help!!! Firmware error on my MuVo2 FM (5.0

Similar Messages

Maybe you are looking for