[HELP] Flash CS6 iPhone 5

Hi, I am wondering how I can get the screen to fit an iPhone 5 screen because I have everything on it. The pixel are on 640 x 1136. When I open that app in my iPhone 5 it does't expand it to the top and very bottom, it just does it thicker. Someone said something about launching screen and I don't know either to make that. Please help!
Thanks, Sander!

flash cs6 supports as2 without doing anything special. just open your publish settings.

Similar Messages

Problem installing Adhoc version to iPhone and iPad - Development Environment Is - Adobe Flash CS6

Hi,
I have successfully submitted 2 versions of the application. There are 2 different versions for iPad and iPhone separately. These were developed using Adobe Flash CS6 and AIR SDK - 4.0.0.1628. The category is Lifestyle and app is free.
Now I wanted to add new feature of push notification to both iPad and iPhone versions. I have successfully tested the development version with development profiles and certificates over iPad and iPhone.
Before submitting the app to Appstore I was trying to test the Adhoc version with production environment and profiles but application was not installing to the iPad, it is the same iPad that is used for development. But after searching forums and other help Adhoc version was not installed to iPad the solutions that were tried are as under:
1. Create new certificates and profile for Adhoc
2. Change Entitlement tags in Application xml file
3. Remove existing profiles from iPad to avoid error.
4. Update OS version of iPad to 8.1
But once I try to last point - [4] even development version is not installing. Because there are no provision profiles installed.
Can you please help/guide me how to fix it? I need to test both development and Adhoc versions on the iPad and iPhone.
Some more information -->>
// Development Entitlement key - it is working fine with development environment
<Entitlements><![CDATA[
          <key>aps-environment</key>
            <string>production</string>
        ]]></Entitlements>
//Adhoc Entitlement key - it is not working application does not gets installed, icon turns dark and keeps saying installing once you hit the App icon. I am trying to install app using iTunes, after publishsing in Flash CS6 for Adhoc.
<Entitlements><![CDATA[
         <key>get-task-allow</key>
       <false/>
        <key>aps-environment</key>
            <string>production</string>
       ]]></Entitlements>
// If I try installing using install application to connected device after publishing then the error is:
Device Error: Please check if there is enough space on the device.
But I have enough space on iPhone that I am testing. Remember development version is installing successfully and working fine for notifications.
Thanks
PS: I have also posted the same issue under AIR development but there is no reply -
https://forums.adobe.com/message/6862357#6862357

Resolved for iPhone check here
https://forums.adobe.com/message/6862357#6862357
But iPad after updating to iOs8.1 still not installing even development build. I have changed SDK to latest one 15.0.0.302, any ideas?

Launch image for iPhone 5 with Flash CS6

How do I add the required iPhone 5, 4 inch screen launch images to my build using Flash CS6. I have targeted Air 3.8 beta and there is no support for bundling the necessary images. Do I need to edit the plist or app descriptor xml file or something? Do Adobe plan to accommodate these new Apple requirments in a future version of CS6 or AIR SDK?
Up until now I have had no problems submitting binaries to the Appstore, but as of May 1st Apple reject any binaries that are not optimized for the 4 inch screen of the iPhone 5.
Thanks.

Hi,
Thanks for your effort!!!Did exactly the same, but no result.I changed the version number in Flash in the airsettings to 2.1, and also tried (1.1, 2.1. 1.0.1)After that, put another version ready to upload. Select this version in the apploader.And than it tells me: This bundle is invalid. The value for key cfkbunleversion in the info.plist file must contain a higher version than that of the previously uploaded version.
I do not want to update my app, but only the screens you see when buying the app in de store.And also the name of the developer. I changed my apple id from [email protected] into [email protected] thought if I run an update, the apple-id of the app will change.
(I am not sure).
Hope to hear from you.
Newspaper want a interview because it's a creative app from the city, now I hope it will work in time...App name is: jabenjibbe
Kind regards,Christa.
Date: Sun, 4 Aug 2013 20:56:45 -0700
From: [email protected]
To: [email protected]
Subject: Launch image for iPhone 5 with Flash CS6
    Re: Launch image for iPhone 5 with Flash CS6
    created by gdfsdrghdhdfhrthfghgfhgth in Flash Pro CC - General - View the full discussion
Hey Christa,
I'm not entirely sure what process you've gone through, but as far as uploading an update goes, it's much like uploading your original app. You need to go to iTunes Connect first and log in, go to "Manage Your Apps" and then click on the app you want to upload an update for. There'll be an option on the next page that says "Add a version". You then enter the information that you need to for the updated app and click on "Save". You'll then have the button you need to click on that says something like "Ready to Upload Binary" or something similar.
Once you click on that, you need to open up Application Loader and then upload your updated app through that. If you've entered the correct information in the steps above, you should be able to choose the new version number for your app from a list. You then just submit it like you did originally.
After that, you simply have to wait. It's not instantaneous. Submitting an update is much the same as when you submit an app for the first time. It has to go through the whole review and approval process all over again. So when you go back to iTunes Connect, you'll see for the app you've updated, there'll be a green light for the older version that's approved and currently on the App Store and an orange light for the update that's waiting approval. Once the update has been successful, it will automatically replace the older version (if you chose that option earlier) and then you will only have the one green light, for the most recent version, on iTunes Connect and then people who have downloaded the app previously will get the Update alert in the App Store on their phone/device letting them know that there are updates available.
For me, the update process was reasonably quick. It took anywhere between 3 and 5 days before the update became active on the App Store. Hope this helps.
Cheers,
Hally
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5566190#5566190
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5566190#5566190
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5566190#5566190. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Flash Pro CC - General by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I need help to install Toolkit CreateJS for Flash CS6.

Hi,
I need help in installing CreateJS for Flash CS6. I had downloaded the Toolkit CreateJS from here: http://www.adobe.com/go/downloadcreatejs and here: http://www.adobe.com/devnet/createjs/articles/using-flash-pro-toolkit- createjs.html. When I attempted to install the extension using Adobe Extension Manager, the installation files did not have the required .zxp or .mxp files. It only had a file with a .mxi extension. Please advise. Thanks.

Why installing IIS o_O?
For Installing a developer Machine just install Oracle Developer suite; for testing your forms you use OC4J ("start OC4J instance" in start menu), and you can run your forms in web; no need for a aditional webserver (don't believe there's an OC4J connector for IIS available; and if so I wouldn't use it either ;-))
For Installing a server for "productional" use install Oracle Application Server (available on otn) which comes with an Apache as webserver and all the other needful things for runnung forms on the web.
For configuring both of them just take a look at the documentations on http://otn.oracle.com
regards
christian

Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!

Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!

Nobody can tell you anything without proper system info or other technical details. The standard answer with all text issues simply is, that you have a "bad font" on your system and need to get rid of it.
Mylenium

I need help getting my Intuos5 to work with Flash CS6

Can someone give me some help with this? I can't find a single thing on Google that helps me.
I installed Adobe Flash CS6 recently and I have been using my Intuos5 Large for a long time now with Photoshop CS6. The thing is, with Photoshop, it took forever to get working properly. It turned out that I needed to use the 64-bit version because my 64-bit system and tablet drivers won't work with 32-bit Photoshop.
Concerning Flash, it's the same problems as Photoshop. It refuses to recognize my tablets functions such as pressure and tilt sensitivity. It also has an annoying lag or lack of response if I do small, quick strokes. I would switch Flash to 64-bit mode, but there isn't one. I can't find the little stroke-like icon in Flash to turn on sensitivity either. I'm really confused. I've tried it with Flash CS5.5 and it's the same thing.
That's my issue, and I have tried restarting the software and rebooting many times as well. There doesn't seem to be much for options. This all leads to it probably being a 64-bit and 32-bit compatability issue
I'm running Windows 7 with more than enough power to maintain Flash CS6. It is possible that I may need to update my tablet driver since I did for Photoshop CS6, but it was a pain in the *** getting Photoshop to work until I used 64-bit mode. I may need additional files to mod the software.
I would really appreciate the help so I can begin to learn animation. It's my passion. Thanks, in advance.
Here are my relevant specs:
System Information
Time of this report: 9/4/2012, 01:32:48
       Machine name: LAPPY_TOPPY
   Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503-2030)
           Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
       System Model: Satellite L675
               BIOS: Phoenix SecureCore Version 2.30
          Processor: Intel(R) Core(TM) i5 CPU       M 450 @ 2.40GHz (4 CPUs), ~2.4GHz
             Memory: 4096MB RAM
Available OS Memory: 3954MB RAM
          Page File: 2016MB used, 5890MB available
        Windows Dir: C:\windows
    DirectX Version: DirectX 11
DX Setup Parameters: Not found
   User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
     DxDiag Version: 6.01.7601.17514 64bit Unicode
Display Devices
          Card name: ATI Mobility Radeon HD 5650
       Manufacturer: ATI Technologies Inc.
          Chip type: ATI display adapter (0x68C1)
           DAC type: Internal DAC(400MHz)
         Device Key: Enum\PCI\VEN_1002&DEV_68C1&SUBSYS_FD001179&REV_00
     Display Memory: 2735 MB
   Dedicated Memory: 1014 MB
      Shared Memory: 1721 MB
       Current Mode: 1600 x 900 (32 bit) (60Hz)
       Monitor Name: Generic PnP Monitor
      Monitor Model: unknown
         Monitor Id: LGD01CA
        Native Mode: 1600 x 900(p) (60.080Hz)
        Output Type: Internal

If you are moving from an existing Mac to a new Mac the easiest thing to do is connect the two Macs via a Firewire cable and run the Migration assistant. If you are moving files from a Windows platform or you don't want to use the Migration assistant review this article.
http://docs.info.apple.com/article.html?artnum=300173

Need help with Flash CS6 swf files

I have upgraded to Flash CS6 from CS5. My problem is now whenever I made an swf movie, install it into an html page then upload it is doesnt show up. I didnt have this problem with CS5. I run it in test and it works on my computer but when I upload it it doesnt. I have uploaded the script folder so that wouldnt seem to be the problem. I dont know what is going wrong. Some help would be greatly appreciated.
Thanks
Brent
http://baconball.com/index2013.html

open your fla is flash pro.
click file>publish settings
tick swf and html wrapper
click file>publish
upload the newly published swf and html to your server.
open the newly published server html using your browser.
any problem? if yes, post the url to your newly published html.

Help! Built in features/hints not working flash cs6. Need fix ASAP

Loads of built in features are not working for me in Flash CS6. When I was using CS4 they did, now they aren't. I will give two examples. Say for example I am writing code in the actions window and I type "green_btn." in regards to the name of a button instance, what usually happens when I hit the "." immediately after "green_btn" a menu will pop up showing me every option I can pick, like green_btn.addEventListener() etc etc. There is usually a menu that comes up, but for me there is no menu. I have also created a button symbol, placed an instance of it on the stage, named the instance and tried it again (cs6 is supposed to recognize the "_btn" automatically and make the menu come up even if there is no button created, but I decided to create one just in case), and no menu pops up, still . Something is wrong here, it used to work for me when I had CS4 installed. Another example is if I am in the actions window again, and I type in a function like trace(); for example, you are supposed to be able to put your cursor infront of it, or highlight it and hit F1 and it will take you directly to the help page for that function. This does not happen as well. As I go on and on I seem to keep stumbling across all these built in features for convenience that are not working. And I know 100% that they are supposed to be, I am actually in a class right now for flash and I watch demo videos where it works perfectly. What is going on with mine? I have checked every possible preference and option, I have everything and I mean EVERYTHING up to date with the most current versions. I'm stuck, and I am getting really pissed off to be blunt, I need to fix this ASAP because it is going to affect my studies which are currently ongoing, I have deadlines to meet and I am dicking around trying to fix this. PLEASE PLEASE HELP ME! Any suggestions and solution will be greatly appreciated on my behalf. If anyone helps me fix this I'll kiss you!!!!!!!!

I increased the cache from 800 to 5000, is that sufficient?
The .fla is saved to my harddrive
still no code hinting. I also unchecked and rechecked the code hinting, and even did a reboot on my comp and still nothing.
everything is updated, EVERYTHING, to the most current version available. I updated everything possible through the "Adobe Help Manager" and also through the help menu within the programs themselves; Help->Updates. I made slight progress with the help issue, in general settings withing the "Adobe Help Manager" I changed it to display local help only. So now when I initiate help by either right clicking, and then going to "view help" in the pop-up menu, or by hitting "FN+F1" (hp laptop) it brings up the flash_reference.pdf but it does not go directly to the function selected as it's supposed to. So maybe that isn't even progress...
I watched the demo video for the course I am in, and it shows our instructor put the cursor immediately infront of trace(); (within the actions window) and go to help and it goes directly to the help section on trace, and then he also highlights trace(); and goes to view help and it does the same thing.
I am also in touch with him (its an online course) to see if he can figure out it, and I am still waiting to hear back from him, but no one seems to know. I even contacted ADOBE today and got passed on to 3 different people only to be given the toll free 800 number because no one knows how to fix it.

Flash CS6 "Help" menu doesn't launch help.

I would like to open the Flash Help window by clicking the "Help" menu within the Flash CS6 interface, but when I click the Help menu and then select "Flash Help" from the drop-down list, nothing happens. I can access help online, but what about times when I have no internet connectivity? I would be grateful for any advice. Thanks!

Are you on Mac or Windows?
When I try to launch help for InDesign on Mac (via the menu Help > InDesign Help...) my default browser opens this url http://helpx.adobe.com/indesign/topics.html.
In addition the Adobe Help Manager opens and when I try to open InDesign PDF help a PDF opens that says help will be available in June.

Flash CS6 and the old Packager for iPhone?

Hi,
I was wondering: now that it's possible to select an Air SDK version in Flash CS6, would it also be possible to use Flash CS6 with the old 'packager for iPhone' that came with Flash CS5?
I know, I know, I should get rid of that old thing, but reality is that I used packager for iPhone to create one of my first apps and now I can't update to a newer version of Air. Apple doesn't allow that, because existing users wouldn't be able to update anymore.
It would be great if CS6 can work with the old Packager for iPhone.
Does anyone know the answer to this?

Too bad... I was hoping to kick my old CS5 installation out of the window...

Project Messed Up Flash CS6 please help!

Hello , I really need your help guys. I spent many, many hours on an animation project and suddenly, when I opened it this morning, all the animation was messed up: the limbs of my character are all over the screen and all the work I did is now lost. I can't even begin to describe in words how pissed I am. From now on I have trust issues with flash cs6, this has never happened to me, ever, not with any kind of software.
Is there anything I can do to recover my work or at least preventing this from happening again? Because if every time I save a project I have to be worried that it is going to get messed up, please tell me now because I give up on flash cs6.

Thanks fo the rplies John, Bill
I'm only using a Nvidia 9600GT, just updated to the newest driver 196.21 WHQL, released on 2010-01-19.
but didn't solve the problem.
Is there anything else to setup or configure??

Correct Flash CS6 iOS publish settings for iPhone?

My programmer and I are trying to publish an iOS app for iPhone from Flash cs6 and are being rejected because "Your app did not run at iPhone resolution and/or 2x iPhone 3GS resolution when reviewed on iPad. The contents of your app are not displayed within the confines of the screen."
In Flash CS6 iOS publish settings there is an option to export for iPad Only, iPhone Only, and for iPad and iPhone. iTunes Connect is sending us a screenshot that shows what we see when we publish a development IPA file using the iPad and iPhone setting. But the IPA file we submitted to them was published using the iPhone Only settings which when viewed on the iPad2 shows up inside the little iPhone 1X frame and can be expanded to 2X as well. I believe this is what they are saying is not happening when they do the same.
Has anyone else who uses Flash had this issue? If so what stage size and what publish settings should be used when trying to create an iPhone only app?
Thanks in advance, Patrick

kishliver wrote:
If so what stage size and what publish settings should be used when trying to create an iPhone only app?
iPhone only app should be published with stage size:
640x960 for portrait view
960x640 for landscape view
... if the app are going to be fullscreen.

Bug - Flash CS6 Help does not load

Fresh install of WIndows 7 (32-bit). Fresh install of Flash CS6 trial. Click Help > Flash Help and nothing happens. Help does not load. Browser never opens. Nothing happens. Same with Help > Flash Support Center. Also installed Photoshop CS6 trial and that Help system does load (opens browser to online help page). Flash CS6 Help is completely dead. Anyone else experiencing this? Or better yet - how to fix it?

Hi Lorenzo,
What locale are you trying to install Flash Pro CS6 (and hence, the Help update) on?
Also, could you please send us your error log?
Depending on your platform, it is found at the following locations:
Win: Program Files\Common files\Adobe\Installers or \Documents and Settings\<user>\Local Settings\ApplicationData\Adobe\AAMUpdater\1.0\
Mac: /Library/Logs/Adobe/Installers or ~/ Library/ApplicationSupport/Adobe/AAMUpdater/1.0/
Regards,
Suhas Yogin

Hello, I am using flash CS6 on a mac. I cannot find the Motion Editor window anywhere on the flash interface. Can you help? Ben

Hello, I am using flash CS6 on a mac. I cannot find the Motion Editor window anywhere on the flash interface. Can you help? Ben

Here's what happens for me
This is my AI file
Here's the save dialog
Notice that the All button is selected.
Here's the PDF
Notice the 1/5 at the top indicating a 5 page PDF.

Starling help using flash cs6

all I'm trying to do is convert some animations to spritesheets..
converting and making spritesheets is covered extencivly by adobe tutorials and pretty much everywhere I look. using them in actionscript and getting them running is another story..
I've picked starling as the data format to export my spritesheet. mainly because it was a new addition to cs6 and i hear it is vary optomized for android and ios
im trying to follow various tutorials done on flashbuilder but i cant even import starling elements, it seams cs6 and adobe air 3.3 did not come with starling, so im at a loss of how to install and use starling for adobe flash cs6 any of the tuts for getting it to run, even on starlings site are for cs5.5, a year out of date and i have to downgrade certain elements to get it installed on cs6..
why is it this dificult to get this working

Please refer the tutorials here, you will get a fare idea how starling is working
. http://www.hsharma.com/tutorials/starting-with-starling-ep-1-intro-setup/

[HELP] Flash CS6 iPhone 5

Similar Messages

Maybe you are looking for