HELP - FM10 does not save files - Now Resolved

Thanks all viewers! Issue resolved.
A recently installed FM plugin (AcrolinxIQ) seem to have caused the issue.
Plugin uninstalled - issue resolved.
I have an issue with saving files/book files that has been occurring since October 17th, 2013.
Win7 (64-bit),
FM10 (10.0.2.419) installed (working in Unstructured).
When I have a book open, I click the Save button for any of the files (including the book file), the button does not grey out.
1. When I select File > Save all files in a Book, frame shows all the signs that it "saves" all the files.
2. I then select FIle > Close all files in a Book.
3. Frame now prompts - do I want to save each and every file.
I have to click Yes/No to each and every file (nightmare).
4. I then manually click the Save button to save the book, and again - the button does not grey out.
5. I then click File > Close Book, Frame now prompts do I want to save the book file.
Here's what I tried so far to resolve, but without any success:
1. I typically work with files located on a netword drive, so I copied some books over to a local drive (c:\). SAME BEHAVIOUR.
2. I completely uninstalled Frame, and installed it again. SAME BEHAVIOUR.
Anyone here seen this? Any ideas?

You will want to ask your question in the Illustrator forum. The creation of the file has nothing to do with Reader.
Good luck.

Similar Messages

Yesterday I updated my mac software and now my ilustrator cs6 does not save files nor open old ones

I was working just fine with my desktop imac and it said there were som software updates available so I click on it.
Now my ilustrator Cs6 does not save files nor open them, the finder is behaving strangely or crushing...somebody asked me if I have downloades a font recently, yes I have.im in the middle of an important job and dont know wht to do

Moving this discussion to the Illustrator forum.

LR cc does not save files in Original Folder - various folder issues

the LR cc application is in my Windows 7 C: drive, a 256 MB Solid State Drive. I keep all my images on a 1T Hard drive, "My Pictures." I convert raw CR2 files to DNG files using the Adobe DNG converter, and store them in a labeled folder in My Pictures (on the 1T hard drive). I then make jpegs from the DNG image files, often with lots of "development" (adjustments.) When I save them, I export them to the "Same Folder As Original." BUT, they are always exported to an entirely new folder located on my C: Drive, my SSD. This error started happening recently; I have used lightroom for several years and never had this issue. In addition, it seems to make a copy of my DNG files in the same folder, and those files seem to be different from my originals. (I think lightroom keeps track of the adjustments somehow, without using sidecar files. I don't know how that works. I got an error message when I tried to use one of the DNG files after I deleted them from the C: drive.
What's going on? I tried looking at Preferences but did not find a relevant topic.

I have to say that menu bar has been the same for many, if not all, versions of LR. It also give you a description of what each option does, IIRC.
You have all the options you need, "Copy as DNG" (What that does is take whatever file extension you are using, even a DNG file, and converts it to a DNG, Yes even if the original is a DNG), "Copy" (I hope you know what that does. COPIES the files from the original location to another location of your choosing), "Move" (MOVES the file/files from the original location and places it/them in a folder of your choosing) all the above also put the images in the LR database and last but not least Add (All that does is add the images to your Lightroom database).
I always use the ADD option as I copy my images off the memory card to a folder or folders of my choosing first.

Compressor does not save files?

After searching the Compressor threads I have yet to find the answer to my issue.
Using Final Cut Pro 7.0.1, I imported footage shot on a Canon XL-1, edited it then exported to Compressor 3.5.1 (using the DVD Best Quality settings) to use it in DVD Studio Pro 4.2.2.
The first few times I did it, it worked fine. Then, as I had to fix up the clip and re-export to Compressor, it would run normally, the Inspector doesn't show any mistakes or problems and it takes the average 40mins to an hour to work. But when it's done, the clip is nowhere to be found on the computer and the external drive.
I tried to re-export using 'Send-to/Compressor' and use different names to different folders, even to different drives, I also tried 'Share/DVD', 'Share/other' and 'Share/to Compressor' with no luck.
I get the same problem with different clips i.e.: Motion clips used in FCP to Compressor, 1min-45min-90min as well as 140min clips. I copied the exact file names, ran Compressor then copied the name in Finder to see where the file is going and it's not there.
From the threads I tried changing Targets from its preset to Cluster Storage, resetting the Background Processing for the Batch Monitor, changing priority from HIGH to MEDIUM, deleting the Finder Folder: and restarting the machine: I did those steps one at a time, then retried the export, then moved on to the other steps: I didn't do all of them at once.
I recently Zapped FCS2 from my iMac 24in 2.93GHz AND my MacBook Pro 2.4GHz, because I originally had an academic version, in order to install FCS3. Both machines are running Snow Leopard 10.6.2 with 4GB of RAM.
Sorry about the long explanation but I wanted to cover all the bases without wasting anyones time with troubleshooting already performed. I'll appreciate any help I can get as this project was due last week and I'm running out of excuses to give to the client!
Thanks.

So I have a fix to this problem but not a permanent answer or solution yet. See link to other posting below, thanks.
http://www.kenstone.net/discussions/read.php?3,20506,20506#msg-20506

Time Capsule does not save files

I recently tried to make a backup with the new MacBook I have but I always get the same answer from the Time Capsule System that there the backup is too large for the backup volume and that Time Machine requires more backup volume. Now, I dont know how to create more backup volume, the Time Capsule I have is a 2TB system and I thought that new backups would overwrite the oldest backups ...

Dominik Hock wrote:
I recently tried to make a backup with the new MacBook I have but I always get the same answer from the Time Capsule System that there the backup is too large for the backup volume and that Time Machine requires more backup volume.
How much data is TM backing-up? The amount used on your internal HD (and any externals that are also being backed-up)?
Is anything else on the TC besides these backups? If so, what, and how large?
I thought that new backups would overwrite the oldest backups ...
Yes, if it can. But it won't delete your last remaining backup, so you're without any.
See #C4 in Time Machine - Troubleshooting for details.
Sounds like it's trying to do do a very large backup, and just can't make room.

Help - quicktime does not play files from apple website - keeps saying I ne

keeps saying I need to download it but I have it already?

The site is telling you to download QT?
Are you using QT X, the free version 7.x or QT PRO?
Do you have the latest version of Adobe Flash Player?
Have you considered updating your OS?
May be something simple as restarting your computer and/or repairing permissions & restarting your computer.
!http://i50.tinypic.com/izvwo1.gif!

I recebtly bought an app (FIFA 12) now every time i play a match after the match it does not save an just goes to the home page without warning and i have to start all over again and no i did not press the home button. plz help

i recebtly bought an app (FIFA 12) now every time i play a match after the match it does not save an just goes to the home page without warning and i have to start all over again and no i did not press the home button. plz help

You can't gift it, gifting can only be done from within the store, not from within your library.
Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Why BRBACKUP cmd does not save SAP control files?

Hello!
    We experience some issues running BRBACKUP utility to save SAP's data objects.
When we run the BRBACKUP cmd, we see that all tablespaces and configurations files
are save, but BRBACKUP cmd does not save control files. Why, we don't know?
BRBACKUP run throught AIX crontab and it looks like this ...
brbackup -u system/disapinst01 -c -m full -t online
the init<SID>.ora file looks good, we can see that the *.control_files entry is OK.
*.control_files='/oracle/<SID>/origlogA/cntrl/cntrlDDI.dbf',
                '/oracle/<SID>/origlogB/cntrl/cntrlDDI.dbf',
                '/oracle/<SID>/sapdata1/cntrl/cntrlDDI.dbf'
SAP's ENVIRONMENT
- HW: IBM pSeries Server (JS21) BladeCenter 8677-3RV
- SW: Plataform IBM AIX V5.3.0.0 ML 5300-05
- DB: Oracle 10g
Somebody help us, please!

brbackup copies one controlfile to /oracle/PRD/sapbackup and then backs up this copy.
look for a similar message in your log:
BR0319I Control file copy created: /oracle/PRD/sapbackup/CNTRLPRD.DBF 28680192
BR0077I Database file for backup: /oracle/PRD/sapbackup/CNTRLPRD.DBF

I have lost all of my bookmarks from the drop-down menu. It says it is empty, but never have I deleted them. And when I bookmark a page it does not save it. Please help

Question
I have lost all of my bookmarks from the drop-down menu. It says it is empty, but never have I deleted them. And when I bookmark a page it does not save it. Please help

Ok this is bizzare!
Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

When i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

when i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

I would first try unplugging All the USB devices plugged into your computer, and then plug back in just the iPhone and see if that is recognized. Also, do you have the latest version of iTunes for Windows installed on your PC, as you need to?
Hope this helps

Recording does not save the file

We are facing a serious problem with Captivate 2. After
recording about 40 -50 slides it does not save the file.
The system hangs for several minutes and there’s no
response.To analyze this problem we have tried out User Forums and
FAQs.In the User Forum too similar problems are reported. For
example, visit:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=464&threadid =1261116&enterthread=y
In fact, in our team Captivate is loaded on a standalone
hi-end system with ample space and memory.
We have also tried workarounds to address this issue. For
example, we deleted all temp files from library and we also saved
it on a short path like c:/project.
Nothing works!!!

Hi Madduser and welcome to our community
When you say
To analyze this problem we have tried out User Forums and
FAQs are we to assume you simply searched them and read the
threads? I'm assuming this because this is your first post here.
You will note that the thread you linked to mentioned the
person was attempting to save on a network. I do see you have tried
using the shortened local path to no avail, so I'm guessing the
network is ruled out here.
As usual, I've got more questions than answers, but hopefully
as we work through them something will come to light.
* Have you EVER been able to create and save things using
Captivate? Or did you just install it and it's never worked for
you?
* Have you tried what is outlined in the following Technical
Note?
Click here to read the
Technical Note
Cheers... Rick

Image Capture does not save a scanned file

Image Capture using an HP Photosmart C3180 to scan a document does so but does not save the file to the Desktop.
A pop-up windows displays Scan Results but still not file
O/S Lion, Image Capture Version 6.1 (440).
Used to work, what is the deal?

As for the scanner - so is this new one wireless? When I hooked up my Epson All-in-One, I had to install it via USB first before I could install the wireless (per their instructions). With Snow Leopard, I simply installed the driver and it covered and recognized both the print and scan function - not so in Lion; I had to go through hoops with the scanner part and it finally showed up as a separate unit. I thought that is silly, but - as long as it works..... I'm trying to think of possibilities since I'm about out of ideas, so you might want to consider that (if it applies). The other troubleshooting suggestions usually include redoing the "add" function after a reboot.
As for Image Capture, I am out of ideas. FWIW, I never use it - in my workflow, there is no need for it. Not sure if this would have an impact, but make sure that you choose Image Capture in the CDs&DVDs Preference Pane (mine is set to ignore or ask purposely):
If that does not work, I'd suggest reinstalling the OS over the top of what you have.

I want to import bookmarks from Safari on the Mac same computer. Firefox help says Menu Bar/File/Import. My Firefox does not have File/Import option. How do I import bookmarks from Safari to Firefox?

I want to import bookmarks from Safari on the same Mac computer. Firefox
Help says use Menu Bar/File/Import.
My Firefox does not have File/Import option.
How do I import bookmarks from Safari to Firefox?

Import and Backup is the third (last) button on the toolbar in the Bookmarks Manager (Library) that looks like a star.<br />
Other platforms show the text label, but on Mac you only see toolbar icons.

When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?

When I tried to run php file I am getting the following error message, "/home/karthick/Desktop/PHP files/third.php could not be opened, because the associated helper application does not exist. Change the association in your preferences." How to fix this?

first, you just asked me to use MS file Explorer to see what the properties were.,..and to ask what happened. Yes - that's on my hard drive. The problem I have is opening word files in a DB that is web enabled.....I've used Firefox browser for that, and everything else , for years...... When I look at the Tools, and options on FireFox., as your support page noted.....NOTHING is listed in the Applications tab....hence my note asking for help. The file I need to open is a Word file out on a web enabled DB. It's not on my hard drive - I have to problems opening docs there - but for that, I don't use Firefox

I am trying to save a large file on Illustrator CS6 and it does not save and instead says "Unknown Error Occurred." What do I do?

I am trying to save a large file on Illustrator CS6 and it does not save and instead says "Unknown Error Occurred." What do I do?
The file has 4 artboards with webpage designs. I tried to take two of the artboards, create a separate doc with those two, and save, but the result was the same.
However, I am able to save simpler, smaller files.
I need to not lose these files and I am afraid to quit and restart and lose my unfinished work.
Any advice?

What happens if you choose this option?

HELP - FM10 does not save files - Now Resolved

Similar Messages

Maybe you are looking for