HELP!!!! fone won't proceed after start up page

hope u can help me. my bb won't proceed after the startup page. its just white w/ the blackberry logo in it.. what should i do?

Do you have a good recent backup of the data on the device? If not, I HIGHLY suggest that you try make a back first with the device only at the startup screen, start the BlackBerry Desktop Software (do you have that installed on your PC?) and IF the device connects and appears in the Desktop Software, do that backup.
Otherwise, proceed as below:
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Updating Adobe Community Help files fails every time after starting

    Hello,
    I e.g. go to «Support Center for Photoshop» from the menu within the app. Adobe Community Help starts up and tells me theres new content, do I want to download that. It seems to start the dl just fine, then reports an error «16882» (if I'm remembering it right).
    Why? We have very fast very broadband internet connection and I use a 2011 27" iMac with max Gig RAM installed.
    Any hints there would be appreciated.
    Thanks!

    Thanks, Mister Kapoor,
    that solved my problem!
    All the best to you, sincerely,
    Olaf Mueller
    Mit freundlichen Grüssen,
    Olaf Müller
    COMPLOT AG  Multimedia Project, Gerberngasse 44, Postfach, 3000 Bern 13 
    Tel. ++41 31.313 30 33
    Fax ++41 31.313 30 39
    [email protected]
    http://www.complot.ch
    THE ULTIMATE PARTNERS
    - RITTER KREATIV
    Unternehmensberatung+Kommunikation,
    integrales Marketing, Werbung, Promotion, PR
    - Complot AG Multimedia Project
    Interactive Solutions, Internet, Intranet, E-Business, CD-ROM, DVD, Hosting
    - FOTarena
    Studio-Pool für Foto, Video, Bildbearbeitung
    Am 24.04.2012 um 12:30 schrieb Arpit Kapoor:
    Re: Updating Adobe Community Help files fails every time after starting
    created by Arpit Kapoor in Downloading, Installing, Setting Up - View the full discussion
    Seems Adobe Air or Cummunity help has gone cprrupt. Lets follow the below suggestions:
    Step 1: Uninstall adobe air from Utilities and re-install the latest adobe AIR from "http://get.adobe.com/air/otherversions/"
    Step 2: Follow "http://kb2.adobe.com/cps/842/cpsid_84215.html" and re-install the Community Help Air application.
    Step 3: Restart the machine and launch adobe Community Help and try to install all the updates and check if it works fine.
    Hope that Helps!.
    Arpit
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4356729#4356729
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4356729#4356729. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Creative Cloud won't work after starting – just shows an empty window.

    Hello there!
    I just have downloaded the Creative Cloud desktop software to install a trial version of InDesign CC. Sadly, all I get after starting the Creative Cloud, is an empty window with the black menu bar on top. That's all.
    I have tried to re-install it, to update Adobe Air et cetera. Nothing works for me.
    My system runs on Win7 64bit.
    Thank you for any help,
    Michael

    I encountered the difficulties with Mavericks and Dreamweaver running so slowly that the program almost unusable.
    I tried all sorts of work-arounds, such as installing a clean Maverick system on a newly formatted disk. Then a minimal install of Adobe CC, and nothing else. It made no difference whatsoever!
    Then, I was advised that uninstalling Adobe Air, which seems to cause all sorts of problems, would resolve the issue - which it did!!! Unfortunately, if you are using programs that depend upon Adobe Air, such as Muse, they will not work until Adobe Air is reinstalled.
    Adobe have their head buried in the sand, and are offering no solutions, or responses to this matter.
    Frankly, I cannot see any advantage of paying for a subscription  for Adobe CC, when Adobe CS6 offers virtually the same functionality at no additional cost!

  • HELP - Mac won't reboot after latest Apple patches!

    Just came home and started doing some work when the software updates asked to install 4 or 5 patches for my Mac. I accepted and the install was done in less than 10 min. Time for a restart.
    Well it did not come back after that. After the standard power on sound, the dark gray apple apears on light background and thats it. I have been waiting for some 15 min and nothing.
    Did a hard shutdown (the only thing it would do) and a reboot into my secondary HD through an 'option' boot.
    Checked the files system on the main hard drive with the disk tool: clean
    Ran Disk Warrior: clean
    Another attempt to reboot: same thing - it hangs with the Apple on the screen.
    1.) HELP - what can I do to make my Mac boot again?
    2.) If you run a mirrored door dual G4 1.25Ghz you might want to stay away from the latest Apple patches.
    Thx!
    Oliver

    Hi, it maybe "too late" to ask now, but did you Repair Disk Permission before doing the updates, and after the (auto) restart, did you do another Repair Permission and then restart again?? And in this whole process of updating, especially Apple OS, Security Updates and Apps Updates, did you unplug all the external devices??
    I know on the net some "schools" say there is no need to do this, and that you can run apps in the background and still do the Software Updates; I beg to differ, then you'll see lots of posts here asking for help, and at the same time cursing and swearing at Apple.
    I just did my latest updates, and my iMac is running just fine.
    So pardon me, and I apologise for nagging, but don't blame Apple or someone else when your mac acts up because you did not even prepare the basic procedures. Ask yourself this very simple question, if you are ill and taking medication, would you take it down with alcoholic drink?? Which may worsen your body situation?? Maybe it's not a very good example.
    fxstein, sorry there, not here to lecture you or "tell you so", but am here to help, but I've just seen too many posts complaining of updates went wrong only to find out they did not do the necessary preparations.
    If you can't boot from your problematic primary drive, try booting from your secondary, thank gosh you got one, and see if you can Repair Permission and also Repair Disk of the Primary Drive. Another way is to see if you can boot up from your OS disc and do the same, see if you can revive or repair your drive.
    If still cannot, see if you can Safe Boot, (press Shift key) while booting, if you can, most likely some StartupItems may have been corrupted or something, the only thing you can do now is to backup your important data and then do an Archive and Install option.
    Take care and Cheers

  • W530: GPU Fan Won't Stop After Starting

    Hello all,
    I'm the proud owner of a brand of the W530, which I'm absolutely loving.
    One of the greatest things is how absolutely cool the laptop stays. And after much tinkering with TPFanControl, I've decided just to let the BIOS do it's thing and keep my laptop at a constant 40C temperature, even if it means having the fan on 2700RPM all the time.
    One annoying little problem, though, is the apparent inability to control the GPU fan. 
    Once the GPU fan starts (say for example, I play a game for a short while), it will NEVER stop.
    As I never turn off my laptop, and simply sleep it when not in use, this becomes incredibly annoying, as I'm having the loud GPU fan always running, even though there is no need for it to be.
    Is this a problem with my computer or is this just the way these things are designed? Also, is there a way to manually tweak the GPU fan? (Although this is really stupid, I think we should be past the era where it becomes my job to manually set the fan everytime I want to use it for something, technology should be more advanced in this era)
    Thanks in advance

    Sounds like what this solution was intended to address:
    http://eshop.macsales.com/item/OWC/DIDIMACHDD11/

  • Macbook Pro Won't Boot After Starting Lion Install

    2008 Macbook Pro 17" with Core 2 Dou processor.
    Internal Disk has two Partitions
    Downloaded Lion from App store and ran installer. Selected 2nd partition which is Mac OS Extended Journaled. (I was intending to do a clean install on this empty partition.)
    Installs appears normal, goes to boot and hangs at the gray screen after the chime.
    Verbose logging does not show anything obvious, no more info after identifying the network adaptors.
    Booting with option key does not give option to boot to Snow Leopard partition.
    I

    Welcome to Apple Support Communities
    Press Command and R keys when your Mac starts and reinstall OS X. Mountain Lion is damaged in the computer

  • HELP: T440s won't boot after unsuccessful memory update

    I have a T440s that came with 4GB RAM. Purchased a G.Skill Ripjaws 8GB DDR3L 1600 SO-DIMM (1.35v, PC3-12800, 11-11-11-28) from Newegg and installed in T440s. I did disable the internal battery from BIOS before installed the memory. However, I found my T440s won't even boot. I then tried the memory chip in two other laptops and found this SO-DIMM is defective so it's on the way back to Newegg.
    Now my big problem is that my T440s won't boot anymore even with original configurations. Push the power button, there is no response from T440s. However, I do observed LEDs blink. When only use battery, then LEDs give one short blink every few seconds. LEDs will give four short blinks every few seconds if I plug in the wall power supply.
    Did I kill my T440s ? Any way that can wake it up or I just need to contact Lenovo for warranty service?
    Any help/suggestion is appreciated. Thanks a lot.
    Jon

    <<It turned out that the defective memory killed the motherboard. >>
    The what now?
    I'd like to know more about that. 

  • Mail Clean Install Help: Mail Won't Work After Migrating to 10.6 from 10.4

    I cannot get Mail to open after migrating from 10.4 into 10.6. Mail tries to import my 10.4 folders and messages and then quits unexpectedly. I want to do a clean Mail install to see if I can resolve the problem, but don't know how to do so.
    All advice is greatly appreciated.
    -Brian

    Mail, the application, should not cannot contain any message data assets. The Mail application must sit in the Applications folder, and be usable to every User Account on the Mac, and not just yours (understand you might be the only user, but making a point).
    Mail, the folder of data for just your emails, should properly be at Home/Library/Mail.
    Let me ask again -- in the Applications folder is there an Icon for Mail, and is it the Icon of a postage stamp, or is it perhaps the Icon of a folder?
    However, let me note, that now that I have booted back into Snow Leopard, and used Get Info on the Mail Icon in the Applications folder, it is reported to be 77.5 MB! Looking at it from other boot volume (Leopard) does not see all the elements of its "package" apparently. My apologies.
    Now it is time for a different test -- Create a New User Account, and as that New User launch Mail and try setting up one new email account - if POP select to leave messages on the server. See the following if not familiar with adding a new user account:
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
    The reason for doing this is to test the Mail app itself, and not to permanently switch to a new user account. Tell me if the behavior continues in that New User Account with Mail?
    Ernie

  • Help Iphone won't sync after iTunes update

    So I just updated iTunes to the newest version in preparation for the 3.0 software, My OS is 10.5.7 and Itunes is the latest version and now my iphone won't sync, it will back up but when it says phone syncing it just stops and the spinning ball comes up and then will not go away, tried restarting, anyone have any ideas?

    Restart computer. Power off/on iPhone. Re-connect. If that doesn't work....I had a similar problem. I just downloaded iTunes 8.2 direct from apple website and re-installed....solved my problems.

  • I upgraded to lion and now my 2009 MacBook pro won't boot after the grey page.

    Hi,
    I just upgraded to lion, my computer restarted, and I was able to use it for quite some time with the new software.  It was upgrading the display pad software and when it finished required a reboot, which it did.  Upon restarting my Mac is now stuck on the grey screen which is supposed to show login info and a place to type in your password, but it doesn't.  All I see is grey.
    I'm currently reinstalling lion, so hopefully that will help.  Any suggestions? I want my computer back!

    Does anyone know how to get the version for Lion?
    I just asked that in another thread:
    Does Safari go the way of MobileMe?
    https://discussions.apple.com/message/15790649
    The Safari download page specifically says the version is for Snow Leopard, and only offers this version, and when I try to install it, the routine gets blocked complaining that it needs Snow Leopard.
    I also tried to simply remove the app in order to use Software Update. But this is blocked as well.
    http://www.apple.com/safari/download/

  • HT5622 Keep asking for my billing details and I enter them correctly and it won't proceed?

    Keeps asking for my billing information and it won't proceed after I enter it although the details are correct

    http://support.apple.com/kb/ht1918 <--- changing iTunes method of payment
    http://support.apple.com/kb/HT5552 <--- iTunes Store approved methods of payment

  • MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

    MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

    My daughter's MacBook Pro was doing exactly the same thing.  I don't know if it had anything to do with the latest update.  She called me about a week ago saying that her MacBook began running slower by the day .  She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning.  I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive.  She took it to the Apple store.  Originally, they also thought it was the hard drive.  It ended up being a corrupted operating system (Lion).  Apple genius simply re-installed Lion and she's back up and running.  Good thing she backed up right before it crapped out.  She'll be restoring everything tonight.  Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

  • Software updater, won't update it starts and then after a minute it gives me a Network diagnostics message, that the server is not responding.

    Hi my Software updater, won't update it starts and then after a minute it gives me a Network diagnostics message, that the server is not responding.

    Please include your Mac model and OSX in your profile, as it will help the community to help you.  Thanks and welcome to Apple Communities.

  • Help function in Help dropdown won't start up

    When I try to go to the Dreamweaver Help function under the Help dropdown nothing happens.  This is the same computer that will not work on the Preview in Browser.  It won't go to start the Dreamweaver Support Center either.
    Do I have a bad copy of Dreamweaver CS5.5?  If I have to uninstall and reinstall Dreamweaver CS5.5, will I loose my website or will it still be available?  It won't go to start the Dreamweaver Support Center either.

    Just a quick question: Is your copy of DW licensed?
    If it is, did you try re-installing your DW?
    DW retains website definitions (unless you remove user preferences). However, as a safe bet, I'd recommend that you export all your site data Site > Manage Sites > Export to .ste files to your harddisk before doing a re-install.
    This should mostly sort out all broken installation errors.
    If it still doesn't work, you may have to do a fresh install of DW after clearing out your user preferences too.
    On the other hand, if your copy of DW is unlicensed, I'm afraid we cannot do much to help you!

  • WebLogic 10.3.5.0 won't stop or start propperly after Jdev upgrade

    Greetings,
    Our developers have installed Weblogic with Jdeveloper. Now I'm trying to setup a production environment and use only the ADF runtime version.
    From download ADF runtime is only available in version 11.1.1.6.
    With this I was able to start and stop WebLogic, login to the console thru http or https.
    Now I've done the upgrade to ADF 11.1.2.3 using $MW_HOME/wlserver_10.3/common/bin/config.sh.
    The weblogic process does start, but the console doesn't show. Not on client nor server (Oracle Linux 6.3).
    When I use stopWebLogic.sh to stop WebLogic , I get :
    java.lang.OutOfMemoryError: PermGen space.
    I've set the MaxPermSpace in setDomainEnv.sh to 4096m. Still it seems the MaxPermSize value is not used.
    After this error, the java process remains. The java process :
    oracle 29419 29366 18 15:54 pts/4 00:00:43 /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/jre/bin/java -Xms1024m -Xmx5120m -Dweblogic.Name=AdminServer -Djava.security.policy=/u01/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -da -Dplatform.home=/u01/Middleware/wlserver_10.3 -Dwls.home=/u01/Middleware/wlserver_10.3/server -Dweblogic.home=/u01/Middleware/wlserver_10.3/server -Dcommon.components.home=/u01/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/u01/Middleware/user_projects/domains/base_domain -Djrockit.optfile=/u01/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/u01/Middleware/user_projects/domains/base_domain/config/fmwconfig/servers/AdminServer -Doracle.domain.config.dir=/u01/Middleware/user_projects/domains/base_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/u01/Middleware/user_projects/domains/base_domain/config/fmwconfig/carml -Digf.arisidstack.home=/u01/Middleware/user_projects/domains/base_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/u01/Middleware/user_projects/domains/base_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/u01/Middleware/user_projects/domains/base_domain/servers/AdminServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/u01/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/u01/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/u01/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath weblogic.Server
    [oracle@OL-WLS-PRI ]$ java -version
    java version "1.6.0_24"
    OpenJDK Runtime Environment (IcedTea6 1.11.9) (rhel-1.57.1.11.9.el6_4-x86_64)
    OpenJDK 64-Bit Server VM (build 20.0-b12, mixed mode)
    I'm new at WebLogic.
    What can I check to get to the cause of this?
    After start, the logs keep silent.
    The server has 8Gb fysical memory.
    In top the java process takes 1,6Gb of memory.
    Any help is much appreciated.

    Using this doc:
    http://docs.oracle.com/cd/E23943_01/doc.1111/e14827/overview.htm#CJACJHIJ
    I don't need any of these components:
    Metadata Repository - contains metadata for Fusion Middleware Components (SOA, Webcenter, Identity Management) . There are various types of Repository – Metadata Services (MDS), Audit Services (IAU), Oracle Internet Directory (OID), Single Sign-On (SSO), SOA Infrastructure (SOAINFRA), Business Activity Monitoring (BAM) , User Messaging (ORASDPM) , Oracle WebCenter (WEBCENTER) , WebCenter Portlets (PORTLETS) , Oracle Content Server (OCSERVER) , Portal (PORTAL), Discoverer (DISCOVERER), Oracle Identity Federation (OIF) , Discussions (DISCUSSIONS) and Wiki and Blog (WIKI)
    So why a repository?
    And I keep getting redirected to here:
    http://www.oracle.com/technetwork/middleware/downloads/index.html
    Has RCU now been integrated in one of the other installations?

Maybe you are looking for