Help font differs from topic font after reinstall

Hi
We have an old system that occasionally has an update. We use
RH X5. My hard disk crashed Monday and IT reinstalled Robohelp. I
updated a topic today. The original font was Arial 8. When I
recompiled the Help, the topics in the document that I updated are
displayed in the Help file in Times New Roman 8. Topics that have
not compiled are still in Arial 8. I created a small test help file
from scratch and the topic is displayed in Times New Roman 8.
Any ideas how I can get the proper font size back?

Thank you so much. The there was an answer (replace
HPJ2Hlp.dll) in the technotes forum (Font is substituted with Times
New Roman on WinHelp export). I downloaded the dll file and it
worked!

Similar Messages

Can I selectively copy files from TM backup after reinstalling OS from dvd?

Hi everyone,
I have searched both this forum and the web, and have not been able to find an answer.
I have two separate questions. First, I have a 2TB external with a 1.5 TB partition for TM, and 500GB for my Aperture library and iTunes videos. I have TM set so it will back up the second partition on the same drive, as well as the internal HDD of my MBP and another external drive to the TM partition. This won't cause any problems when restoring will it? I don't have another hard drive right now to make another backup of the libraries, because my last one crashed.
I'm planning on doing a reinstall of OSX from the dvds, (Apple's advice) and I was wondering if it's possible to selectively copy things from the TM backup? For example, I would copy the applications over automatically, but I'd want to pick and choose which of the other files to copy back.
I want to be able to eventually get everything back the way it was with no problems, but I don't want to bring something back that was causing my original problems that caused me to reinstall OSX.
If necessary, even starting out new, provided I could copy everything back again piecemeal, would be fine. I just want to get these problems to stop!
Thanks!

Thanks for your reply. I think that my problems are hardware related, but Apple wants me to try to re-install from scratch.
What would I miss that's in the Library folder? The only thing I can think of that'd be hard to get back would be emails from Mail, as I think they are stored in there. However, I excluded one of my email address folders anyway, since it was 4 gigs, and it's a Gmail account anyway.
I just want to make sure that I wouldn't lose anything important.
Also, when I plug in the TM drive after reinstalling from scratch, it won't try to overwrite my backups with a new, almost blank one will it? I'm assuming no, but I want to cover all my bases, as I'm not that familiar with TM.
Thanks for your help!

Missing fonts after reinstall

I reinstall Adobe photoshop elements 11 and lost some of the fonts including ITC Bradley Hand. What do I need to do to get the fonts back?

I am sorry Dottysquare but ITC Bradley Hand is not an Adobe font. You can find a list of the fonts we produce at http://www.adobe.com/fonts.

Lost a font after reinstall of CS2

Hey,
Last week I had to reformat my computer and reinstall Photoshop CS2. I can no longer find a font I was using for a project, and I am pretty sure it was a Photoshop font because I don't think i ever added fonts. It is called "Motorwerk". Does anyone know if this is a Photoshop font, and if so how can I get it back?
Thank you!
Chris

That's not a font that came with Photoshop.

HELP! I LOST many apps after reinstalled the 10.2.1 OS

My phone is Z10, and the previous carrier is O2. (now I already unlocked it). Yesterday, I post an message about my phone 's problem, today I did , but after I reinstalled the 10.2.1 OS. Something happened. Please take a look and help me .
1. The starting windows image is changed (not China unicom or ).\ feels a little bit slower than before,
2. I lost many apps, the voice control、twitter、 youtube、music etc. Now my phone only have one page of apps( should be three page of apps). And the monitor doesn't have reaction when I tapped it.
3.when I recover my back-up, I found out only those apps from BBW or original apps recovered, the others not.
So what should I do now? I have tried twice to reinstall OS.

Based on the screenshot you didn't follow my instructions in the other thread and reinstall the OS using BB Link. You installed a developer version of the OS that you downloaded from somewhere that is incomplete. Please do the following if you're not using Link to install the OS officially:
1. Connect your device to your PC and make a full backup with BB Link (if you don't already have a backup.)
2. Download the correct autoloader for your device from the first post in the thread linked below. You need to know your full model number (i.e. STL100-1 (or -2, -3, -4) which can be found in Settings >About. Make sure you download the one for your model that contains the radio file. There is another crackberry thread that contains a newer radio file that you can load once you're all done if you want to have the latest and greatest. The process for loading a radio file is the same as this process but no need for backup/restore.
10.2.1.1925 OS: http://forums.crackberry.com/bb10-leaked-beta-os-f395/lengend-presents-10-2-1-1925-all-q-z-887047/
10.2.1.1926 Radio: http://forums.crackberry.com/bb10-leaked-beta-os-f395/1926-radio-q10-5-z10-1-2-3-4-z30-891107/?highl... (load this the same way after the OS above has been loaded.)
You will need to unzip the downloaded file from above before you can run it. If you don't have an unzipping application on your computer you can download 7Zip from here: http://www.7-zip.org/download.html
Close BB Link and leave the device connected.
Double click on the autoloader you downloaded.
The process should take around 5 minutes or so. when it's done, you'll need to complete the startup process before you can connect to Link and restore data.
When you're done you can restore your backup, though I recommend NOT restoring your Settings backup as it's best to start clean with this new OS but it's up to you. You may experience small bugs here and there from restoring the Settings portion of the backup. Media and Application data seem to be OK to restore.
This will install the correct version that has all the apps you're missing.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

HT4413 Trying to restore my iMac from Time Capsule after reinstalling the OS X

Had to reinstall the OS after replacing the power supply and finding the OS corrupted. Originally the iMac came with 10.4.7 which we upgraded to 10.6.8. Now trying to restore the data from my time capsule using migration assistant only to get the message that the backups were done with a newer version of OS X. I checked the version installed and it's up to date.
How can I get the data and how is it possible that the version is newer given that the same disks were used??

See Pondini's TM FAQs, for starters.

Sharing Internet, DIFFERENT FROM TOPIC BELOW

Ive been trying to share my mac's internet connection with my palm via bluetooth. the two devices are paired, they connect properly, i can send files to the palm through bluetooth, but i can not go online with the palm. ive done everything i know how to. sometimes it times out, sometimes it gets stuck on "initializing" and sometimes on "signing on."
if anyone can help, id appreciate it!
PS. Palm Tungsten E2, ibook G4, OSX 10.3.9, USB bluetooth module

Save yourself a great deal of trouble and do two things:
Update to Mac OS X 10.4, and download and install the Missing Sync for Palm OS. This will specifically address your concern about internet sharing by providing an easy to configure and use interface for this service, and will provide a far better synchronization experience than you now see under Mac OS X 10.3.9 with iSync.

HELP! System won't restart after reinstall

I had a MASSIVE lockup--not a kernel panic, but everything kind of locked up. I was compressing video and had an ftp client and Word and Opera open, when the system hung up. I forced a restart but the system took forever to start. I booted from an external drive, repaired permissions, and even finally did an archive and restore--but the system is still hanging on startup. It looks like everything is there, but the system (even the new one) doesn't boot up normally. Of course, this is a day of a deadline and I was planning to take a trip with my family.

HI,
Try booting from your install disk and check the hard drive for errors.
Insert the installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have Disk Utility open, look at the bottom of the window. You will see Capacity and Available. Make sure the free disk space never falls below 10%, 15% is better.
If you cannot boot from your install disk, try booting in Safe Mode
Mac OS X 10.5: Troubleshooting installation, startup, and login issues
Carolyn

After reinstalling MAC OS 10.6.8, config the permissions to read/write/no access, my MacMini [mid 2010] refuses to reboot. I tried to reboot in safe mode with fsck, but after the steps to be taken, it says fscs not done, root device is read only

After reinstalling MAC OS 10.6.8, I config the permissions to read/write/no access, my MacMini [mid 2010] refuses to reboot. I tried to reboot in safe mode with Command+S and fsck, but after the steps to be taken, it says fscs not done, root device is read only. I also tried to bypass the Mac firmware password by taking one Ram card out and reboot the macmini while holding COMMAND+OPTION+P+R. But no luck. The macmini is not able to see the mac OSX installation CD.
Please help ??

f.fromleiden wrote:
After reinstalling MAC OS 10.6.8, I config the permissions to read/write/no access, my MacMini [mid 2010] refuses to reboot.
How and where did you change which permissions? And what was the goal?
Do you have a complete backup of your system? and more importantly data files?
What happened that prompted the need to reinstall the 10.6.8 update?
The immediate road forward would be to boot from the optical drive and revert the changes you made.
What happens when you boot with the install cd and hold down C or hold down the option key?
[Off topic: I've been to Leiden a few times ]

Staging area different from target - which KM???

Hi,
I need to transfer data from CSV to DB (only new inserts operation)
I am working the following KM's
LKM File to SQL
IKM SQL Control Append
It's working fine. However now i need to keep the staging area (where C$, I$ etc table are created) in a separate schema.
I have created a diff schema for staging area and selected in the interface "Staging area different from target"
However not sure of which KM's to use.
Please let me know how to achieve this.
Thanks,
Rosh

Hi
1st thing you have to give the workschema for temp tables when creating physical schema in dataserver for target.
Then you have to select the workschema in overview of interface as "staging different from target".
After doing this when you will use predefined KM for the interface it will create temp tables in workschema.
Now suppose you are not giving the workschma at the time of creating physical schema and you have selected "staging different than target" in interface.Here your C$ table will be created in your workschema but I$ table that is used by IKM is going to be created on target schema.So for this again you have change the IKM KM i.e. where to create I$ table (wokrschema) by selecting the corresponding logical schema.
So its better you give the workschema at the time of creating physical schema.
Here is the query to give privilege by the sys_dba
Grant create any table to ODI_TEMP.
Hope you got it
(Please mark the answer as correct or helpful and close the thread)
Thanks

After removing system fonts and reinstalling fonts, FireFox will not start

After removing system fonts and reinstalling fonts, FireFox will not start! When I start FireFox the "Mozilla Crash Reporter" opens as if FF just crashed??? I don't see any records in event viewer. I am using FF v3.6.3 on a Windows 7 box. I tried uninstalling 3.6.3 and installing 3.0.18 and had the same problem!
== This happened ==
Every time Firefox opened
== After a uninstalled all fonts including system fonts and then reinstalling system fonts. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; AskTB5.5)

The files with submitted crash report ids are inside the ''submitted '' directory, from the directory you found the LastCrash.txt timestamp file.
The file names will begin with '''bp-'''
There might be more information from the crash report, but it might just tell us you are crashing the first time Firefox tries to use a font.
One thing I suppose you could do is select only those fonts you've got in Tools -> Options -> Content -> Fonts and Colors -> Advanced and then uncheck the '''Allow pages to use their own fonts''' option.
See http://support.mozilla.com/en-US/kb/Options+window+-+Content+panel#Fonts_Dialog
To be honest, I can't find anything on this Netscape Font Navigator and it sounds highly dubious.

Font of alpha list bullets is different from the bullet text

TCS3/FM10/RH9
Windows XP
I have several alpha lists and the font of the alpha bullet is different from the font of the alpha bullet. How do I change this in CSS?
Thanks in advance.

William,
Rather than make the change in the project, I would rather make the change in the stylesheet. I was aware of the multiple stylesheets and use the old fmstyles.css to govern the project.
How would I make this change in the stylesheet?
Thank you so much for your help.
Mary

Directwrite Fonts different from IE

Hi guys,
I have enabled directwrite for my Firefox however I realised that the fonts that it is showing is different from those in IE10.
Is this due to a setting in Firefox? Is it possible to achieve the kind of directwrite rendering that IE10 is providing?
I know this is weird but I do like the blurry fonts in IE10.
Heres a screenshot comparison:
http://i.imgur.com/L5Of59z.png

If there are problems when hardware acceleration is enabled then try to tune the setting with this extension:
*Anti-Aliasing Tuner: https://addons.mozilla.org/firefox/addon/anti-aliasing-tuner/
Try to set the gfx.content.azure.enabled pref to false or if this didn't help disable Direct2D by setting the gfx.direct2d.disabled pref to true on the about:config page and leave hardware acceleration otherwise enabled.
Make sure that you have the latest version of the graphic display driver.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

Fonts in lots of pages look "empty", but after reinstal it shows right

After starting Mozilla FireFox application I try to open pages.
Some of those pages show messed up fonts (Letters looks empty with border).
After reinstalling default system font "Tahoma" into Windows Fonts directory and refreshing page they looks correctly.
After restart of computer procedure repeats.
How does it looks:
http://img98.imageshack.us/img98/4659/ffoxfont.png
Or even Mozilla support page:
http://img135.imageshack.us/img135/1787/mozillafonts.jpg

You can use this extension to see which fonts are used for selected text.
*fontinfo: https://addons.mozilla.org/firefox/addon/fontinfo/
You can do a font test to see if you can identify corrupted font(s).
*http://browserspy.dk/fonts-flash.php?detail=1

The font of text marker insertion is different from before

A strange behaviour from a while: the default font of text marker insertion is different from before. I don't remember what font was before, but surely not the one of now.
I think it's probably due to "firefox" installation (it has caused also a system preferences modification I discovered with a lot of trouble...)
Anyway, how I can restore the "old" default font of marker text insertion?
(the problem occurs only on insertion because in arrange the usual font view is maintained)

its hard to work out what your problem exactly is. can you give more details? why is the text marker font important? do you mean how it displays in the text marker editor?

Help font differs from topic font after reinstall

Similar Messages

Maybe you are looking for