Help for a cairngorm beginner!

hi!
I've looked for samples on Internet but I've found just the
cairngorm store (src untraceables) and "Hello world" with SOAP.
I understood just a minimum how Cairngorm works but i don't
no what i've to put, where and how, to create a simple application.
I'd like, for example, to add a evt using addCommand() of the
Front Controller and implement the execute() method to do a work
and put in place a Model Locator.
Why not viewing a message on the screen when we click on a
button?
i think it will be a start point without calling a server nor
services.
I'll be very recognizing for your help.

You should take a look at this
http://www.cairngormdocs.org/tools/CairngormDiagramExplorer.swf

Similar Messages

Help for a baffled beginner

Ive just installed Oracle Express to help me go through a phase test. Ive created 3 tables under the SYSTEM username that I started the database with. Ive populated the tables with some data
Now whenever I try and enter any SELECT command it tells me
ORA-00942: table or view does not exist
Now a quick look on google tells me this is most likley that I don't have permission...however, I can't see what I can do to change that, I am the only user. If I create a new admin and recreate the tables it tells me the same.
Also, infuriatingly, it tells me that the 'show tables' is not a valid SQL command so I cannot make sure I am typing it correctly. Although obviously I have gone back into the object browser to check countless times.
Please help me out! Im assuming its something small, but google is huge and I don't even know where to begin with this.
Thanks
Mike

Im not using the command prompt, oracle express 10g's menu to create everything.
However the sql for the existing tables is
CREATE TABLE " Employee"
(     "id" NUMBER NOT NULL ENABLE,
     "name" CHAR(100) NOT NULL ENABLE,
     CONSTRAINT " Employee_PK" PRIMARY KEY ("id") ENABLE
CREATE TABLE "Car"
(     "regNo" VARCHAR2(10) NOT NULL ENABLE,
     "distanceInKm" NUMBER NOT NULL ENABLE,
     "kmPerLiter" NUMBER NOT NULL ENABLE,
     CONSTRAINT "Car_PK" PRIMARY KEY ("regNo") ENABLE
These are for the 2 tables I have managed to create under Mike.
There is a 3rd with 2 foreign keys referencing the above tables and for some reaso, even tho it was possible before under SYSTEM, yet do not exist under Mike, I cannot recreate it
When I log back in under system, the above two tables are still there (as I created them earlier) and also the one I mention above that I did successfully create under system
CREATE TABLE "TravelCost"
(     "journeyId" CHAR(10) NOT NULL ENABLE,
     "carRegNo" CHAR(10) NOT NULL ENABLE,
     "employeeId" CHAR(10) NOT NULL ENABLE,
     "occurred" DATE NOT NULL ENABLE,
     "distanceInKm" NUMBER NOT NULL ENABLE,
     CONSTRAINT "TravelCost_PK" PRIMARY KEY ("journeyId") ENABLE,
     CONSTRAINT "TRAVELCOST_FK" FOREIGN KEY ("carRegNo")
     REFERENCES "CAR" ("REGNO") ENABLE,
     CONSTRAINT "TRAVELCOST_FK2" FOREIGN KEY ("employeeId")
     REFERENCES "EMPLOYEE" ("ID") ENABLE
But I constantly get the 'table doesnt exist'.
Apologies for my wirting, Im in rush and I have a new wireless keyboard thats abysmal
Edited by: user8946571 on Jan 4, 2010 10:58 AM
Edited by: user8946571 on Jan 4, 2010 11:00 AM

DIV Confusion... Basic help for a measly beginner

Hi all..
Tried   searching but couldn't find anything - perhaps due to my lack of   knowledge of what terms to search for, so apologies if something like   this has been posted :S
I am making my first website   myself after watching and learning from others. Everything is going   great... except I am having trouble getting my footer div to stick to   the bottom of my browser window but still stick to the white content area. I have tried using fixes on the internet but I'm not quite sure where to put bits of code...
You can view my site (in progress) here:
http://westcoastbushire.com.au/home.php
Can anyone help please?!

Everything is going   great... except I am having trouble getting my footer div to stick to   the bottom of my browser window but still stick to the white content area. I have tried using fixes on the internet but I'm not quite sure where to put bits of code...
If it is the footer you are concerned about then I suggest try the trick given in this article:
<http://matthewjamestaylor.com/blog/keeping-footers-at-the-bottom-of-the-page>
Let us know if this solved your problem.
Good luck.

Help for a complete beginner!

Hello,
I want to apologize in advance for how little I know on this topic, and about programming together. I am not asking for myself, but to give some advice to a young family member of mine. He works with a company that uses a ColdFusion website, and we were speaking the other day about how the company is looking to eventually hire a new ColdFusion programmer.
Here is the problem for my nephew: he doesn't have any programming experience. He is very computer savvy for a young guy, and he is very interested in going after this, but he told me he doesn't know where to begin. I took the obvious course and said "aren't there such things as ColdFusion classes?" but he seems to think it is not so simple as that - like you can't just jump in as a total beginner into working with ColdFusion?
So I thought I would do a little research. If you were just starting out, and were looking to eventually develop and program a coldfusion website, how would you start? What steps would you take (the more detailed the better)? Someone told me "he should start out by learning HTML", but if you could even break that down more - how would you go about learning HTML? If you have any more questions for me about my nephew, i'd be happy to answer them.
Thanks!

Learning HTML would be a good start in contextualising how web pages work, and therefore what ColdFusion code will be needing to do.
FInding HTML tutorials is easy: just google "introduction to HTML" or "HTML tutorial" or something. If you prefer printed books, there'll be a bunch of those available too (search Amazon). I do not know which books are considered good or bad in this context, but the user comments and votes should be a good indication.
As for learning ColdFusion, just leaping into a course might not be the best bet for your newphew. Way back when I did the ColdFusion Fasttrack course without ever having used (or seen) CFML before, and found it easy, but I did have a background of doing the odd bit of programming, so I was at least familiar with basic principles. If he doesn't have any pre-existing programming knowledge, it might not be the best way to start.
The only printed CF book of note (that I'm aware of) is the CFWACK. I've not looked at one for years, and cannot remember whether it's intended as a learning tool, or just as a reference. Someone else can perhaps comment on that.
There are a bunch of matches for "coldfusion tutorials" on Google, of varying age and quality: they're probably worth looking at though.
If I was learning a new language, I'd just use online tutorials. If I was going to be learning programming, though, I'd go do a general programming course (like at the local polytech or college or whatever) first. The principles behind programming are more important than the language, IMO.
Of course if he dives into CF and has questions to ask, he can always ask them here.
Adam

Need Help for IS U Beginner

Hi,
I am currently working in IS OIL Downstream (SD)
Now moving to IS -U, Can somebody help me to get idea of IS U design.
I already referred help.sap.
If possible, provide me transaction codes,any screen shots, important fields in each config any...
Thanks in advance.
Anji
Moderator note - thread locked due to violations - no specific questions
Edited by: William Eastman on Apr 21, 2010 6:44 AM

Hi Syeda,
You can refer to this link for all the ISU documentation:
http://help.sap.com/saphelp_utilities472/helpdata/en/c6/4dce68eafc11d18a030000e829fbbd/frameset.htm
Richa Tyagi

Help for a mac beginner?

A few years ago i was given a Blue & White PowerMac G3 as part of my "severance" when the web-dev company I worked for went out of business. It's been hanging around unused since then. I'm looking to use it strictly for writing projects and email -- nothing fancy. But I need to do some upgrades on it just to get the internet hookup. What route do I need to go to be able to get online and run MS Office 2001? Thanks for your help!
Here are the specs --
B/W PowerMac G3
384MB
PPC G3
350MHz
OS 8.6
Two (2) internal hard drives of 6GB each.
Apps: Illus 9, Photoshop 6, ATM Deluxe, BBEdit 5, Dreamweaver 3, Flash 4 & 5, Quark 4, InDesign 1.5, MS Office 2001
Help!
B/W G3 Mac OS 8.6 or Earlier

Hi, Brooklynmambo -
Welcome to Apple's Discussions.
But I need to do some upgrades on it just to get the internet hookup.
What might those be?
There are many folk still running OS 8.6 who have no problem getting on line, even using DSL. If your ISP has some specific requirements, please advise what those might be.
The first thing to do, while it still has OS 8.6 on it, is to make sure the firmware on it has been updated. It is needful to do that before any late versions of OS 9 can be installed, and before installing OSX. You can download the applicable firmware updater from this Apple KBase page -
Article #86117 - Firmware Updates
Note - it's a good idea to print out the included instructions before updating the firmware.
Once that is done, your machine should be good to go for all versions of OS 9, as is.
However, it would not hurt to increase the RAM - adding one more 256MB module (which is the largest a B&W G3 can use) would be best; two of those would not hurt, especially if you plan to go on to OSX.
Re going on to OSX -
Your machine is rated for all versions of OSX released to date; it would be well to not consider any OSX version earlier than OSX 10.2. OSX 10.3 is probably one of the better choices for that model.
You might want to consider replacing one of the two hard drives with a larger one, for use with OSX - it needs about 3GB of drive space to install, and runs best when there is at least 5GB of free space left afterwards.

Help for a Dreamweaver beginner

Hi everyone,
I am a currently doing the Total Training DVD for Studio 8
bundle and have built my first index page. There is a section in
the DVD (which I can't for the life of me find again) which covers
browsers.
My page displays correctly in Internet Explorer but not in
Firefox so I have had to build a second index page which is good
for the firefox browser. In the training video it tells me how to
set up both pages so that when they load the browser will select
the right index page to show.
Can anyone tell me how I set this up in DW8 please to save me
going back through 10 hours of video. (I'll remember to bookmark it
next time)
Thanks in advance.
NumberTen

The training video you should be using is one in HTML and
CSS, not DW. Send
it back.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"PriceyNumberTen" <[email protected]> wrote
in message
news:ergvsq$bfc$[email protected]..
> Hi everyone,
>
> I am a currently doing the Total Training DVD for Studio
8 bundle and have
> built my first index page. There is a section in the DVD
(which I can't
> for the
> life of me find again) which covers browsers.
>
> My page displays correctly in Internet Explorer but not
in Firefox so I
> have
> had to build a second index page which is good for the
firefox browser. In
> the
> training video it tells me how to set up both pages so
that when they load
> the
> browser will select the right index page to show.
>
> Can anyone tell me how I set this up in DW8 please to
save me going back
> through 10 hours of video. (I'll remember to bookmark it
next time)
>
> Thanks in advance.
>
> NumberTen
>

Help for an ambitious beginner?

I am trying to create an app for my phone and I am stuck... I want to enter 3 numbers, press a generic button and have the app plug the numbers into a formula then display the result.... The only problem is that I know no Java whatsoever... So far I have downloaded a bunch of apps including the Sun ONE Studio 5, Mobile Edition... I found a bit of code in an article about phones not being able to handle float numbers that converts dollars/cent to pennies and back... I didn't bother with the conversion code but I did grab the code for inputting the dollars and cents and modified it to grab my 3 numbers... My problem is that I cannot figure out how to get my formula to work... I have a line " int val = ( num1 + ( num2 * 4 ) - ( num3 * 10 ) ) / 50" but I keep getting a "operator + cannot be applied to java.lang.Integer,int" error for each operator I use, what am I doing wrong???? Thanks in advance for any suggestions you have!!!!

I think I figured out my problem but I'm not sure how to fix it.... I think the problem is that the class that is trying to do the calculation is not able to get the values of the variables from the other classes that are assigning values... I kinda fixed it by changing my code but it caused another error....
before:
// code for entering first two values removed
public class EnterNum3 extends TextBox implements CommandListener {
    public EnterNum3(){
            super( "Third Value:", "0", 5,
                    TextField.ANY );
            addCommand( exitCommand );
            addCommand( okCommand );
            setCommandListener( this );
        public void commandAction( Command c,
                                   Displayable d ){
            if( c == exitCommand ) exitMIDlet();
            num3 = getString();
            int inum3 = Integer.parseInt(num3);
            display.setCurrent(new ShowResult() );
public class ShowResult extends Form
                         implements CommandListener {
       public ShowResult(){
            super( "Results:" );
            int val = ( num1 + (num2 * 4) - (num3 * 10)) / 50;
// remaining code removedWhen I changed it to this, I got rid of the "operator x cannont be used..." error.
// code above this point removed
public class ShowResult extends Form
                         implements CommandListener {
       public ShowResult( int num1, int num2, int num3 ){
            super( "Results:" );
            int val = ( num1 + (num2 * 4) - (num3 * 10)) / 50;
// remaining code removedbut then I got a "cannot resolve symbol, symbol : constructor ShowResults ( ), location: class test2.EnterNum1.EnterNum2.EnterNum3.ShowResult" error
any ideas on how to fix this?

Some SQL Help for a Complete Beginner

...........

Use ROLLUP then
SQL> select id,
2         case when grouping(id)=1 and grouping(pro_name)=1 then 'Total' else pro_name end pro_name
3         sum(quantity) quantity
4    from product
5   group by rollup(id, pro_name)
6 having (grouping(id)=0 and grouping(pro_name)=0)
7      or (grouping(id)=1 and grouping(pro_name)=1)
8 /
ID    PRO_NAME               QUANTITY
11011 Socket Type 3                20
11110 Wrench Type 2                44
11111 Bolt Type 1                  40
22022 Hammer                       30
22220 Wrench Type 3                44
22222 Bolt Type 2                  40
33330 Wrench Type 4                44
33333 Bolt Type 3                  40
44440 Nut Type 1                   80
44444 Bolt Type 4                  40
55550 Nut Type 2                   80
55555 Nail Type 1                 400
66660 Nut Type 3                   80
66666 Nail Type 2                 400
77770 Nut Type 4                   80
77777 Nail Type 3                 400
88880 Socket Type 1                20
88888 Nail Type 4                 400
99990 Socket Type 2                20
99999 Wrench Type 1                44
      Total                      2346
21 rows selected.Your price field is CHAR data type. You cant use it with quantity field which is a NUMBER data type.
The basic structure of your table is wrong you need to modify it.
Edited by: Karthick_Arp on May 8, 2009 11:47 PM

Need Help for AIR Email Application

Hi,
I’m a beginner to Adobe AIR.
My new assignment is to create an AIR Application which works like MS Outlook with minimal features like compose mail, inbox, send items and contact details.
With the help of some server side script (like PHP, CF) I can make it work. But My TL asked me to communicate directly with mail server through AIR.
I googled for a week for some tutorial to help me, But I can’t find anything useful.
Is there any way to communicate directly with web server and list the Inbox, Outbox, and Contact details…? If so, please help me to find the solution…
Thanks In Advance

Hi,
You can use LaunchExecutableEx to determine the window state:
LaunchExecutableEx ("command.com /C calc.exe", LE_HIDE, NULL);
Beware that this function does not wait for the started executable to exit.
It executes the command in the string and continues.
If your application has to get the results of the call, then you need to get the application handle (3rd parameter, put a variable instead of the NULL above) and call ExecutableHasTerminated in a loop to find out if the execution finished.
Read carefully the help for the LaunchExecutableEx function and Handle parameter.
To get the result of the command line call, you can add a "> output.txt" parameter to the end of your command line call.
This way all the text output of the command is written to the output.txt file, from which you can read the result.
Check the command-line email sender program's help if there is a special paramter to make it more "verbose".
Hope this helps,
S. Eren BALCI
www.aselsan.com.tr

Creating search help for a field in AdHoc Query

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Need to restrict values in F4 help for Batch Characteristic

Hi,
I need to restrict values in F4 Help for a batch characteristic based on values entered for another characteristic. I could not find any BADI or Exit for this purpose. There is a BADI CACL_VALUE which is triggered after an entry is selected from dropdown list but nothing when we press F4. I thought of using Object Dependency but I need to write a programming logic for the requirement. Please let me know if there is any way to write program in Object Dependency or any other way for this requirement.
Regards,
Nikhil

Hi nikhil simha,
first of all, find out which search help is called.
[Hierarchy of the Search Help Call|http://help.sap.com/saphelp_nw70/helpdata/en/0b/32e9b798da11d295b800a0c929b3c3/frameset.htm]
may help you.
If you know the search help, you may enhance it, but first of all you should check the where-used-list and make sure that the search help shows the requested behavior only in the context where you want it to.
If it is your own program, you may be better off to create your own search help and define the triggering fields as search help interface input fields. Then you can use the values to filter results.
Regards
Clemens

Search Help for Vendor Feild not getting populated in the Screen Element

Hi Everyone,
In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
Now that the search help exists and I can drill down the values too but when i select/choose any value, that value is not getting populated in Screen feild.
is there any validation I need to do for this.
Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
Regards,
Raj

Dear Hema,
Could you please tell me how many internal tables you are using to store the data for display.
I observerd that you have lt_stock and lt_mat2 declared in the part of the program
>DATA: lv_stock TYPE lty_stock.
>DATA: ltmat2 TYPE TABLE OF lty_mat.
you have displayed above, however you are also using ls_stock and lv_stock .
>IF p_ztotal = ' '. "line
>WRITE 18 ls_stock-matnr.
>WRITE 38 lv_stock-strgr.
>
>ELSEIF ztotal = 'S'.                             "subtotal
    >WRITE: 15 ls_stock-nrmit.
    >WRITE 32 lv_stock-dispo.
    >WRITE 43 lv_stock-fevor.
>ELSE.                                            "total
    >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
>
>ENDIF.
Are those for displaying some other information?
Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
Best Regards,
Rajesh.
Please reward points if found helpful.

Search help for SKAT-SAKNR OR SKAT-SAKNR is not working

Hi All,
I have created a Search Help for F4 in a dialog program for SKAT-SAKNR OR SKAT-SAKNR. While i click F4 on that field, it displays blank values.
Here is the module:
module HELP_FOR_SAPGL_ACC input.
CLEAR t_SAPGL.
SELECT SAKNR TXT20
    FROM SKAT
    INTO CORRESPONDING FIELDS OF TABLE t_SAPGL UP TO 1000 ROWS
    WHERE SPRAS = SY-LANGU.
   WHERE L_GL_ACC = v_FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE         = ' '
      RETFIELD               = 'SAKNR'
    PVALKEY                = ' '
     DYNPPROG               = PROGNAME
     DYNPNR                 = DYNNUM
     DYNPROFIELD            = 'SKA1-SKANR'
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
     VALUE_ORG              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
    TABLES
      VALUE_TAB              = t_SAPGL
    FIELD_TAB              =
    RETURN_TAB             =
    DYNPFLD_MAPPING        =
EXCEPTIONS
    PARAMETER_ERROR        = 1
    NO_VALUES_FOUND        = 2
    OTHERS                 = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule.
In the above code I am selecting 1000 rows from SKAT table and in the Search Help Popup it is also displaying 1000 rows but all are blank.
Please help me.
Regards,
Avaneet

Hi check my weblog on search help exit codeing..
https://wiki.sdn.sap.com/wiki/x/du0
\* Prepare for output
CALL FUNCTION 'F4UT_RESULTS_MAP'
TABLES
shlp_tab = shlp_tab
record_tab = record_tab
source_tab = lt_result
CHANGING
shlp = shlp
callcontrol = callcontrol
EXCEPTIONS
illegal_structure = 1
OTHERS = 2.
IF rc = 0.
callcontrol-step = 'DISP'.
ELSE.

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

Help for a cairngorm beginner!

Similar Messages

Maybe you are looking for