Help for a complete numpty

I'm hoping that some kind soul will take pity on me before I tear the last remaining strands of hair from my head. I've read lots of posts on this very helpful forum and have tried various things, but am now so confused that I think I need to try and clear my head and start from the very beginning.
I live in Cyprus where, three years ago, wireless modems were non-existant. So, I purchased a WRT300N Broadband Router and a WRE54G Range Expander and like magic, I suddenly had wireless capability all over the house and garden by connecting the router to the ISP's modem, and by siting the Range Expander downstairs.
Six months ago, the modem stopped working and was replaced by a new one - with wireless functionality. So, I stopped using the WRT300N and just plugged the Range Expander in downstairs whenever I wanted wi-fi on the ground floor. However, that didn't work too well as I kept getting a red light. For the past week, I have been trying to "fix" things, or at least investigate whether or not the Range Expander is broken.
Today has been a nightmare. Tried installing the WRT300N which I thought I had (lights all working etc) but there's no little Linksys icon appearing in the bottom right of my monitor so is it really installed? And if not, why not? Did all the right things as per the guides with no problems.
Range Expander won't get past "Site Survey Failed" no matter what I do although I haven't yet tried jumping on it - came close a few times though.
First dim-witted question; will the Range Expander work without the WRT300N? Could it be configured to work directly with the modem, bypassing the WRT300N?
Second dim-witted question: are there certain modems that the WRT300N doesn't work with? Perhaps I have one of them?
Thank you in advance to anyone who has the patience to take me on - this could be a long process....................

WRE54G will not work without the Router..Check this compatibility link for WRE54G.
WRT300N will work with all the modem,if the modem has Ethernet Port.

Similar Messages

Time Capsule help for a complete noob to MacBook

Hi everyone
This is been killing me for about 2 months. Currently living in an annex down the end of my girlfriends fathers garden. The wifi doesn't reach so I got a Time Capsule so I could use it as a router.
We've got a cable and it's run from the Time Capsule, down the garden, into the house and plugged into router in the house.
That's where I'm now stuck. I've messed about with it and now my Macbook AirPort won't even recognise my Time Capsule.
This really needs to be in moron terms as I'm clueless. I've spent all this money and can't get it to do what I wanted it to do.
Any help is appreciated, so thanks in advance.

Hi LD.
Thanks for the reply. My MacBook won't even recognise the Time Capsule, I've messed about with the netowrk settings too much I think.
I'm really really stuck.

GetYear help for a complete noob

Hey.
I'm creating a sql data set for my data model that goes like this:
select     "Credit Memo"."Cm Fecha Creacion" as "Cm Fecha Creacion",
     "Medidas CM (Nivel RF)"."Cm Monto Total" as "Cm Monto Total",
     "Medidas RF (Nivel RF)"."Rf Monto Total" as "Rf Monto Total"
from     "SAG"."Medidas RF (Nivel RF)" "Medidas RF (Nivel RF)",
     "SAG"."Medidas CM (Nivel RF)" "Medidas CM (Nivel RF)",
     "SAG"."Credit Memo" "Credit Memo"
where YEAR("Credit Memo"."Cm Fecha Creacion") = YEAR(:p_year)
but i get into 2 errors when doing this.
1)When saving the data set The YEAR(:p_year) errors out
2)If I put where YEAR("Credit Memo"."Cm Fecha Creacion") = :p_year (no year function on the right side)
it saves but when running the xml data samle I get "parsing error"
I've went thought this forum. And i got to post recommending function like <?xdoxslt:get_year(‘2000-04-08’, $_XDOLOCALE)?>.
I have no clue where I can put them, its clear that SQL editor is not the place, right?.
Is there any XML editor for my data sets. Is the "code" view intended for this? How could I use it in that case?
Thanks!

Hi LD.
Thanks for the reply. My MacBook won't even recognise the Time Capsule, I've messed about with the netowrk settings too much I think.
I'm really really stuck.

Help for a complete beginner!

Hello,
I want to apologize in advance for how little I know on this topic, and about programming together. I am not asking for myself, but to give some advice to a young family member of mine. He works with a company that uses a ColdFusion website, and we were speaking the other day about how the company is looking to eventually hire a new ColdFusion programmer.
Here is the problem for my nephew: he doesn't have any programming experience. He is very computer savvy for a young guy, and he is very interested in going after this, but he told me he doesn't know where to begin. I took the obvious course and said "aren't there such things as ColdFusion classes?" but he seems to think it is not so simple as that - like you can't just jump in as a total beginner into working with ColdFusion?
So I thought I would do a little research. If you were just starting out, and were looking to eventually develop and program a coldfusion website, how would you start? What steps would you take (the more detailed the better)? Someone told me "he should start out by learning HTML", but if you could even break that down more - how would you go about learning HTML? If you have any more questions for me about my nephew, i'd be happy to answer them.
Thanks!

Learning HTML would be a good start in contextualising how web pages work, and therefore what ColdFusion code will be needing to do.
FInding HTML tutorials is easy: just google "introduction to HTML" or "HTML tutorial" or something. If you prefer printed books, there'll be a bunch of those available too (search Amazon). I do not know which books are considered good or bad in this context, but the user comments and votes should be a good indication.
As for learning ColdFusion, just leaping into a course might not be the best bet for your newphew. Way back when I did the ColdFusion Fasttrack course without ever having used (or seen) CFML before, and found it easy, but I did have a background of doing the odd bit of programming, so I was at least familiar with basic principles. If he doesn't have any pre-existing programming knowledge, it might not be the best way to start.
The only printed CF book of note (that I'm aware of) is the CFWACK. I've not looked at one for years, and cannot remember whether it's intended as a learning tool, or just as a reference. Someone else can perhaps comment on that.
There are a bunch of matches for "coldfusion tutorials" on Google, of varying age and quality: they're probably worth looking at though.
If I was learning a new language, I'd just use online tutorials. If I was going to be learning programming, though, I'd go do a general programming course (like at the local polytech or college or whatever) first. The principles behind programming are more important than the language, IMO.
Of course if he dives into CF and has questions to ask, he can always ask them here.
Adam

Some SQL Help for a Complete Beginner

...........

Use ROLLUP then
SQL> select id,
2         case when grouping(id)=1 and grouping(pro_name)=1 then 'Total' else pro_name end pro_name
3         sum(quantity) quantity
4    from product
5   group by rollup(id, pro_name)
6 having (grouping(id)=0 and grouping(pro_name)=0)
7      or (grouping(id)=1 and grouping(pro_name)=1)
8 /
ID    PRO_NAME               QUANTITY
11011 Socket Type 3                20
11110 Wrench Type 2                44
11111 Bolt Type 1                  40
22022 Hammer                       30
22220 Wrench Type 3                44
22222 Bolt Type 2                  40
33330 Wrench Type 4                44
33333 Bolt Type 3                  40
44440 Nut Type 1                   80
44444 Bolt Type 4                  40
55550 Nut Type 2                   80
55555 Nail Type 1                 400
66660 Nut Type 3                   80
66666 Nail Type 2                 400
77770 Nut Type 4                   80
77777 Nail Type 3                 400
88880 Socket Type 1                20
88888 Nail Type 4                 400
99990 Socket Type 2                20
99999 Wrench Type 1                44
      Total                      2346
21 rows selected.Your price field is CHAR data type. You cant use it with quantity field which is a NUMBER data type.
The basic structure of your table is wrong you need to modify it.
Edited by: Karthick_Arp on May 8, 2009 11:47 PM

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

Need help for understanding the behaviour of these 2 queries....

Hi,
I need your help for understanding the behaviour of following two queries.
The requirement is to repeat the values of the column in a table random no of times.
Eg. A table xyz is like -
create table xyz as
select 'A' || rownum my_col
from all_objects
where rownum < 6;
my_col
A1
A2
A3
A4
A5
I want to repeat each of these values (A1, A2,...A5) multiple times - randomly decide. I have written the following query..
with x as (select my_col, trunc(dbms_random.value(1,6)) repeat from xyz),
y as (select level lvl from dual connect by level < 6)
select my_col, lvl
from x, y
where lvl <= repeat
order by my_col, lvl
It gives output like
my_col lvl
A1     1
A1     3
A1     5
A2     1
A2     3
A2     5
A3     1
A3     3
A3     5
A4     1
A4     3
A4     5
A5     1
A5     3
A5     5
Here in the output, I am not getting rows like
A1     2
A1     4
A2     2
A2     4
Also, it has generated the same set of records for all the values (A1, A2,...,A5).
Now, if I store the randomly-decided value in the table like ---
create table xyz as
select 'A' || rownum my_col, trunc(dbms_random.value(1,6)) repeat
from all_objects
where rownum < 6;
my_col repeat
A1     4
A2     1
A3     5
A4     2
A5     2
And then run the query,
with x as (select my_col, repeat from xyz),
y as (select level lvl from dual connect by level < 6)
select my_col, lvl
from x, y
where lvl <= repeat
order by my_col, lvl
I will get the output, exactly what I want ---
my_col ....lvl
A1     1
A1     2
A1     3
A1     4
A2     1
A3     1
A3     2
A3     3
A3     4
A3     5
A4     1
A4     2
A5     1
A5     2
Why the first approach do not generate such output?
How can I get such a result without storing the repeat values?

If I've understood your requirement, the below will achieve it:
SQL> create table test(test varchar2(10));
Table created.
SQL> insert into test values('&test');
Enter value for test: bob
old   1: insert into test values('&test')
new   1: insert into test values('bob')
1 row created.
SQL> insert into test values('&test');
Enter value for test: terry
old   1: insert into test values('&test')
new   1: insert into test values('terry')
1 row created.
SQL> insert into test values('&test');
Enter value for test: steve
old   1: insert into test values('&test')
new   1: insert into test values('steve')
1 row created.
SQL> insert into test values('&test');
Enter value for test: roger
old   1: insert into test values('&test')
new   1: insert into test values('roger')
1 row created.
SQL> commit;
Commit complete.
SQL> select lpad(test,(ceil(dbms_random.value*10))*length(test),test) from test;
LPAD(TEST,(CEIL(DBMS_RANDOM.VALUE*10))*LENGTH(TEST),TEST)
bobbobbobbobbobbobbobbobbobbob
terryterry
stevestevesteve
rogerrogerrogerrogerrogerrogerrogerrogerrogerYou can alter the value of 10 in the SQL if you want the potential for a higher number of names.
Andy

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

I've had trouble with my Macbook since the first month I bought it. I've replaced the hard drive 3 to 4 times. Now some programs won't work or shut off by itself. Is it possible to ask for a complete exchange of products?

I've had trouble with my Macbook since the first month I bought it. I've replaced the hard drive 3 to 4 times. Now some programs won't work or shut off by itself. Is it possible to ask for a complete exchange of products?

This may help you: http://store.apple.com/us/help/returns_refund
It would appear that you can ask for an exchange but it doesn't specify any time frame... Hopefully someone more knowledgeable can add to this.
By the way, if you've replaced the drive so many times, perhaps there's something else going on elsewhere.

Find collective Search Help for partner function at runtime

Hi experts,
I have a screen very similar to VF05. When I enter the partner function, the corresponding field for the partner function, I want a collective search help to open.
If I enter the partner function - Employee responsible, then the search help PERM has to be called or for partner function Payer, I want the search help DEBI to be called. Can anyone let me know how can I get the related partner functions, without hardcoding for every partner function. Something similar to the VF05 report.
Warm Regards,
Abdullah

Hi,
Collective search helps:- Combination of elementary search helps. When we need to fetch data based on multiple selection criteriau2019s. More than one tables are Selection from multiple tables
Steps for creating collective search help.
1) Enter the search help name and click on create.
2) Choose Collective search help radio button option as the search help type.
3) Enter the search help parameters.
Note that there is no selection method to be entered for a collective search help.
4) Instead of the selection method, we enter the included search helps for the collective search help.
5)We need to assign parameters for each of the included search helps.
6) Complete the parameter assignment by clicking on the push button.
7) Collective search help offers the user to obtain F4 help using any of the included search helps.
Hope this helps u.
thanks

F4 help for Standard Screen

Hi folks,
          I have to keep F4 help for field 'Goods Receipt' in the stnadard TCode MIGO. Do we need to use any Exit or is there any other way to do so like configuration settings in SPRO...Pls suggest me how can i acheive that one..
            Thanks,
            Shyam.

Hi Shyam,
you have to do from the EXIT only
Enhancement/ Business Add-in            Description
Enhancement
MB_CF001                                Customer Function Exit in the Case of Updating a Mat. Doc.
MBCF0011                                Read from RESB and RKPF for print list in MB26
MBCF0010                                Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0009                                Filling the storage location field
MBCF0007                                Customer function exit: Updating a reservation
MBCF0006                                Customer function for WBS element
MBCF0005                                Material document item for goods receipt/issue slip
MBCF0002                                Customer function exit: Segment text in material doc. item
Business Add-in
MB_DOCUMENT_UPDATE                      BADI when updating material document: MSEG and MKPF
MB_DOC_BADI_INTERNAL                    BAdIs During Creation of a Material Document (SAP Internal)
MB_ME_CSGMT_BADI_SAP                    BAdI: Consignment Processing - Stock Transfer
MB_MIGO_ITEM_BADI                       BAdI in MIGO for Changing Item Data
MB_PHYSINV_INTERNAL                     Connection: Core Inventory and Retail AddOn
MB_QUAN_CHECK_BADI                      BAdI: Item Data at Time of Quantity Check
MB_RESERVATION_BADI                     MB21/MB22: Check and Complete Dialog Data
MB_RESERVATION_SCR                      Screen BAdI for Retrofit DFPS
MB_RESERVATION_UPCHD                    BAdI for Creation and Changing of Manual Reservations
MB_RES_BAPI_CHANGE                      BAdI: Execution of Changes to Reservation Fields
MB_RES_BAPI_CREATE1                     BAdI: Adoption of Customer's Own Fields as Reserv. Fields
MB_RES_BAPI_DETAIL1                     BAdI: Display of Customer's Own Fields in Reservations
MB_STOR_LOC_BADI_GTS                    BADI to Check and Change Storage Location (GTS Fct. Only)
MB_MIGO_BADI                            BAdI in MIGO for External Detail Subscreens
MB_DOCUMENT_BADI_SAP                    BADI for Creation and Changing of a Material Document
ARC_MM_EBAN_CHECK                       BAdI: Enhancement of Archivability Check (MM_EBAN)
ARC_MM_EBAN_PRECHECK                    BAdI: Enhancement of Archivability Check (MM_EBAN)
ARC_MM_EBAN_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EBAN)
ARC_MM_EINA_CHECK                       BAdI: Enhancement of Archivability Check (MM_EINA)
ARC_MM_EINA_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EINA)
ARC_MM_INVBEL_CHECK                     BAdI: Enhancement of Archivability Check (MM_INVBEL)
ARC_MM_INVBEL_WRITE                     BAdI: Enhancement of Scope of Archiving (MM_INVBEL)
ARC_MM_MATBEL_CHECK                     Prüfung ADD-ON-spezifischer Kriterien für MM_MATBEL
ARC_MM_MATBEL_WRITE                     Check Add-On-Specific Data for MM_MATBEL
MB_CHECK_LINE_BADI                      BAdI: Check Line Before Copying to the Blocking Tables
MB_CIN_LMBMBU04                         posting of gr
MB_CIN_MM07MFB7                         BAdI for India Version exit in include MM07MFB7
MB_CIN_MM07MFB7_QTY                     Proposal of quantity from Excise invoice in GR
MB_DOCUMENT_BADI                        BAdIs During Creation of a Material Document
No.of Exits:          8
No.of BADis:         29
Hope these things use ful to you.
Thanks!

Dynamic search help for one field of the SM30 generated maintenance view

Hi experts,
I have one Z* table with three fields. For that table I have generated maintenance dialog in SE55 so I can now run the maintenance in SM30. My requirement is: as soon as a user enters a value for the first field, the search help for the second field should be depended on the value in the first field. Let's say when user entered value 01 into the first field then the search help for the second field should be S_HLP01. For other values entered into the first screen the search help for the second field should be S_HLP02. Both search helps are standard (the names differ).
Is there any change how to achieve this without making completely new dynpro transaction?

Hi ,
You can try it this way.
pass your match-code( search help to function ) HELP_VALUES_GET_WITH_MATCHCODE and get the value and update it in your screen field.
But you have to modify the flow logic in POV event. it would be better if you create your own transaction because once the maintenance is regenerated your modified flow logic will vanish

Search help for partner functions in the message to get organisation unit O

hello,
Depending on the Business partner category (Organisation, Person,Group) the search help of the partner function in a message should return the corresponding partner list.
This is working fine for standard partner functions like SLFN0002 (reported by=P) SLFN0003 (support team=O). When doing a searchhelp we get a list of organisation for the "support team" and a list of users for "reported by". this is a normal behaviour.
When copying the partner function SLFN0003 into a new ZLFN0003 and including it in the partner profile of the message the search help returns all business partners of category P but should return category O. The function category 0016 (service team) is well defined for ZLFN, I guess the link to business partner category is made indirectly there but I might be wrong.
Does anyone of you experience the same behaviour ? Any idea how to correct this ?
thank you for your help
Xavier

Hi,
Collective search helps:- Combination of elementary search helps. When we need to fetch data based on multiple selection criteriau2019s. More than one tables are Selection from multiple tables
Steps for creating collective search help.
1) Enter the search help name and click on create.
2) Choose Collective search help radio button option as the search help type.
3) Enter the search help parameters.
Note that there is no selection method to be entered for a collective search help.
4) Instead of the selection method, we enter the included search helps for the collective search help.
5)We need to assign parameters for each of the included search helps.
6) Complete the parameter assignment by clicking on the push button.
7) Collective search help offers the user to obtain F4 help using any of the included search helps.
Hope this helps u.
thanks

I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro

Hi, My name is David and I followed a course creating my own website from Lynda.com by Paul Trani. After that I created my first own webste. After I finished it, everything was working well in flash and firefox. I have only one problem and question concerning the feed back form for sending info from my website to my emailaddres. I created my website “LisbonDreamWalking”in Flash CS5 pro. I herein have a contact page, where people can send an email for a walk in Lisbon, date,the number of people etc. Now I want through my ISP / host funpic.org, that the input, info text fields to be sended to my emailaddress [email protected]. My mail URL adress iss: http://lisbondreamwalk.li.funpic.org This is a free host, so they don't work with forms like in the course, and I need some additional info for the php. Here is my HTML (Flash actionscript 3.0) for the sending I only have the red text to fill in (php), I was told by the adobe course.I really hope someone can help me?! Thanks in advance!
Instructions: 1. Add your custom code on a new line after the line that says "// Start your custom code" below. The code will execute when the symbol instance is clicked. */ send_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_13); function fl_MouseClickHandler_13(event:MouseEvent):void {          if (thename.text == "" || theemail.text == "" || thetime.text == "" || thepersons.text == "" || themessage.text == "")      {           thankyou.text = "please fill out all fields";      }      else      {           // create a variable container           var allVars : URLVariables = new URLVariables();           allVars.name = thename.text;           allVars.email = theemail.text;           allVars.time = thetime.text;           allVars.persons = thepersons.text;           allVars.message = themessage.text;           //Send info to a URL           var mailAddress:URLRequest = new URLRequest("http.www.namewebsite.com/gdform.php");           mailAddress.data = allVars;           mailAddress.method = URLRequestMethod.POST;           sendToURL(mailAddress);           thankyou.text = "Thank YOU!";           thename.text = "";           theemail.text = "";           thetime.text = "";           thepersons.text = "";           themessage.text = "";      } }
H

Thank you Kglad, I am going to see if I can make it work. I will let you know!
Date: Thu, 13 Oct 2011 08:55:05 -0600
From: [email protected]
To: [email protected]
Subject: I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro
    Re: I need help for actionscript 3, sending php info to my email, website created in Flash cs5 pro
    created by kglad in Action Script 3 - View the full discussion
you missed part of the tutorial (or the tutorial is incomplete): send_btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_13); function fl_MouseClickHandler_13(event:MouseEvent):void{     if (thename.text == "" || theemail.text == "" || thetime.text == "" || thepersons.text == "" || themessage.text == "") { thankyou.text = "please fill out all fields"; } else { // create a variable container var allVars : URLVariables = new URLVariables(); allVars.name = thename.text; allVars.email = theemail.text; allVars.time = thetime.text; allVars.persons = thepersons.text; allVars.message = themessage.text; //Send info to a URLvar mailAddress:URLRequest = new URLRequest("http.www.namewebsite.com/gdform.php"); mailAddress.data = allVars; mailAddress.method = URLRequestMethod.POST; sendToURL(mailAddress);
}} var urlLoader:URLLoader=new URLLoader(); function sendToURL(mailAddress):void{urlLoader.addEventListener(Event.COMPLETE,completeF);urlLoade r.load(mailAddress);} function completeF(e:Event):void{ thankyou.text = "Thank YOU!"; thename.text = ""; theemail.text = ""; thetime.text = ""; thepersons.text = ""; themessage.text = "";}
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3969414#3969414
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3969414#3969414. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Action Script 3 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to implement Value Help for Product ID?

Hi,
I have a Z-Component where I want to use the value help of the Product ID. I found several components which use this value help for Products but I can't get it to work in my component properly.
Does anybody have a short tutorial how I need to proceed?
Thanks in advance.

There is a search component that can be used for this purpose.
This is one function out of several. I don't have the complete implementation at hand but this will give you the first idea.
CALL METHOD cl_crm_uiu_prod_tools_search=>eh_onclosepopup_return_product
   EXPORTING
      ir_search_popup = search_popup
   CHANGING
      cr_context_node = lv_target_node
      cv_index        = gv_tableindex.

Help for a complete numpty

Similar Messages

Maybe you are looking for