Help for a total newb with e65

Hi All,
Please help, I got the E65 and good posts about getting the wlan working.
But I got the navigator app with it, and I really dont get all this GPS stuff , with it working off satellite, but charging my mobile with data chrages, software that works with recievers and phones, some symbian.
Somebody explain it all in lamens terms please.
Cheers

Hi kiltedscot
Can I use this analogy, if you buy a TomTom car navigation unit the package includes the hardware (processor + GPS receiver) and navigation software for a fixed but known cost (there is no charge for receiving data from GPS satellite system owned by the US Government)
You have purchased the processor (E65), you need to purchase a Bluetooth GPS receiver to get positional data, the Symbian navigation software is provided free and if you download maps via your PC there is no need to incur GPRS data charges. If however you want a full talking navigation option, you do need to purchase a licence which in UK is just over £40 for 3 years.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Help for downloading/installing PSE13 with window 8.1?

I get this message after intall attempts ..."Installer has detected that a machine restart may be pending. Its recommended that you quit the installer, restart your machine and try installing again," Lightroom, however, installed fine.

Thank you for responding. I got some advice from a Microsoft forum....it worked. Thanks again.
From: Pat Willener <[email protected]>
To: kathryn kramar <[email protected]>
Sent: Saturday, January 3, 2015 10:56 PM
Subject: help for downloading/installing PSE13 with window 8.1?
help for downloading/installing PSE13 with window 8.1?
created by Pat Willener in Downloading, Installing, Setting Up - View the full discussion
pwillener wrote: What is your operating system?
Sorry, you specified Windows 8.1 in the subject line. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7063274#7063274 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7063274#7063274 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

F4 help for PO number field with SELECT OPTIONS

Hi all,
I have a field (PO no) using SELECT OPTIONS on my selection screen.I need F4 help for this field.How shud i declare it?
I have declared it as follows:
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
select-options sel_po for ZPO_LOI-zobject_id obligatory .
SELECTION-SCREEN END OF BLOCK b1.
ZPO_LOI is a table view with a z data element ZOBJECT_ID to which i have attached a search help which displays the required values for the PO field in the selection screen.But now the problem is i cant see the F4 icon for the field on the sel screen.
Please help.

Hi I have a sapmle code for this.
*&                AT SELECTION SCREEN ON VALUE REQUEST
*-- F4 help for IDOC numbers
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_docnum-low.
PERFORM value_request_status USING 'S_DOCNUM-LOW'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_docnum-high.
PERFORM value_request_status USING 'S_DOCNUM-HIGH'.
*&      Form value_request_status
      text
     -->fp_field dynpro field that gets the return value
FORM value_request_status USING fp_field TYPE dynfnam.
STATICS tl_values TYPE STANDARD TABLE OF tp_value.
IF tl_values IS INITIAL.
     SELECT docnum FROM edidc UP TO 500 ROWS INTO TABLE tl_values
          WHERE credat   IN s_credat
          AND   cretim   IN s_cretim.
     IF sy-subrc eq 0.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
         EXPORTING
          retfield        = 'DOCNUM'
          dynpprog        = syst-repid
          dynpnr          = syst-dynnr
          dynprofield     = fp_field
          value_org       = 'S'
         TABLES
          value_tab       = tl_values
         EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
         OTHERS          = 3.
         IF sy-subrc IS NOT INITIAL.
           MESSAGE i999(zz) WITH 'No values found'(004).
         ENDIF.
      ENDIF.
    ENDIF.
ENDFORM.                    " value_request_status
Regards,
Amit.

Help for a Mac newbie please!

Hi all,
I just got my lovely MacBook Pro yesterday... and could use some help with these 2 problems...
1 - on my Windows PC I have a VPN connection to 1 of my clients. When I tried to set it up on the Mac it's asking for an IPSEC shared secret? Is there any way to disable this requirement, or does my client have to set a key on his server?
2 - I am having a problem connecting to my windows laptop through my home network...if I enable the Guest account on windows XP, the MacBook connects no problem. If however [as I really want to] I try to connect as a "proper" user with username and password, the Mac keeps telling me the username or password is wrong...which it definitely isn't!
My thought is regarding the "domain"...I don't have one set up at home...just a workgroup called "home"...so when I try to login I am only typing in the username...the tooltip for the usernae field says domain\username...do I need to put anything here for domain, and if I do, what...as there isnt one!
Thanks,
Nige

Try my post
http://discussions.apple.com/thread.jspa?threadID=1359723&tstart=0

Need help for connecting Ms Acces with java Swing in Mac OS

Hi all,
i need to connect to Ms Access in MAc os through my java swing program.
Is it possible for accessing Ms access through dsn in Mac OS.
If Possible which driver shall i use for Establishing Connection with MS Access in Mac OS.
Suggestion is needed urgently.
Can anybody help me out regarding this..
Thanks in advance.
Regards,
sreand

if I don't find a better solution I'll try your 2nd option but what do you mean by "combo" update?
My understanding is to simply insert the OS 10.5 installation CD, reinstall the OS and the just keep updating it via the OS SSoftware update panel and stop untill I see the scary Java 8 update. Is that what you meant?
While you can do it that way, the combo update picks up operating system updates through a collection of releases. When dealing with operating system upgrades, I've found using the combo updates to be more reliable than Software Update, as sometimes Software Update doesn't apply updates correctly, and weird things can happen. Doesn't happen often though, thankfully.
So the OS X 10.5.5 Combo update contains all updates between 10.5.0 and 10.5. The 10.5.8 combo update contains the updates from 10.5 thru 10.8. Here are the updates:
10.5 combo update: http://support.apple.com/kb/DL692
10.8 combo update: http://support.apple.com/kb/DL866
If you go down the combo path, repair permissions before and after doing each update. Then do Software Update for any other non-OS X updates, and don't apply the Java Update 8.

Safari display help for a Mac newbie!

Hi everyone,
I have never used Macs before so I hope this question isn't too ridiculous...!
When using Safari, all the web pages I open are either half or three-quarters the size of the screen even when I use the little plus (maximize) button in the top left hand corner.
Only one page has ever fitted the full screen. Is there any way to make all pages opened with safari full-screen size? I've fiddled around with the settings but to no avail...
Any help would be greatly appreciated!

The easiest way I have found to do this is to high light and drag the following java script to your bookmarks menu bar. Name it any thing you want. I called mine re-size. Click it and it will expand the window full page. It works with Safari 2, safari 3 beta, FireFox, Omni-wed, and SeaMonkey.
Full screen script for browsers
javascript:self.moveTo(0,0);self.resizeTo(screen.availWidth,screen.availHeight);

Select statement help for sql/oracle newbie

I have a db for a fake airline. i have a route table that has columns for "FIRST_CLASS_FARE", "COACH_FARE", and "ECONOMY_FARE". I then have a flight table that references the route#, then a trip table that references the flight#. I also have a passenger table and a reservation table that has the passenger # in it. The reservation table also has a column called "reservation class" that has a 'f' for first class fare, 'c' for coach fare, 'e' for economy fare.
What I am trying to do is create a fill for each individual passenger that shows the total amount they spent on all of their reservations.
Any suggestions on how to join the tables to create this bill?
Thanks in advance!

Is it the way the passenger table has columns and is populated,
for a passenger A, takes a route - 1 with First class fare - $2500 on flight- B123, to a trip - t1 and reserved for class - 'f'
If this is the way, then you get the bill from the fare column

BP searh help for Bank control Key (with restricted values)

Hi all Wise men
Please suggest me a way to add search help to screen field (GT_BUT0BK-BKONT) table field( BUT0BK-BKONT ) with values 01,02,03,04,05 in Txn BP.
Sorry Iam new to BDT events and BUPT Txn.
Also Please suggest to which BDT event can I attach a search help through FM 'F4IF_TABLE_VALUE_REQUEST' .
Thanks a lot
Arjun

u can refer to this standard program :BCALV_EDIT_08
also u wont get the list of values automatically..
declare a class :
CLASS LCL_EVENT_HANDLER DEFINITION.
PUBLIC SECTION.
    METHODS :
    handle_on_f4 for event onf4 of cl_gui_alv_grid
    importing e_fieldname es_row_no er_event_data,
ENDCLASS.               "LCL_EVENT_HANDLER
implementation of class
here u pass ur internal table what u want to display as pop up for f4 help.
*&       Class (Implementation) LCL_EVENT_HANDLER
       Text
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
*Method to handle F4 click.
Method handle_on_f4.
Function to create a popup and passing the values of internal table in it.
      CALL FUNCTION 'POPUP_WITH_TABLE'
        EXPORTING
          ENDPOS_COL   = 60
          ENDPOS_ROW   = 60
          STARTPOS_COL = 5
          STARTPOS_ROW = 5
          TITLETEXT    = 'pop up'
        IMPORTING
          CHOICE       = wa_grid-zfield
        TABLES
          VALUETAB     = ITAB
        EXCEPTIONS
          BREAK_OFF    = 1
          OTHERS       = 2.
      IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        RETURN.
      ENDIF.
endmethod.                    "handle_on_f4
ENDCLASS.               "LCL_EVENT_HANDLER
hope this gives u some idea.

I need Help for Connect To DB2 with JDBC

I'd like to know why I Have this problem.
The DB2 v 5.10 is in a IBM OS/390
I know the IP, PORt, DBNAME and I'd like to connect to DB2 with my windows XP using JDCB from IBM.
I use JDBC Universal for DB2 type 4.
Class.forName("com.ibm.db2.jcc.DB2Driver");
Url = "jdbc:db2://IP:PORT/BDNAME";
DriverManager.getConnection.... (url, user, pass)..
If I execute this, I have next problem
SQL state = null
Error code = -4499
There is no available conversion for the source code page, 1208, to the target code page, "". DB2ConnectionCorrelator: null
Why is this?
Finally, the web application will running in a AIX IBM with machine, It could be that this machine (aix) can connect with the IBM OS/390 with JDBC for iBM?
Thankss!!!

Check how you configured the IP on the laptop and computers, assigned by router with DHCP feature enabled? Or configure manually? If it's assigned by wireless router, then make sure you assign big enough IP range in DHCP setting. Take a look on using ping to troubleshoot network and wireless router configuration articles to help you more..

Help for an Oracle Newbie???

Hi there,
Sorry for probably a ridiculously stupid question but my boss has asked me to ask on here! Here goes -
We have a network with around 100 users. Previously we have used MS Access to report on our database, the users then logged into Access Reports and ran the required report. We are now looking at using Oracle Discoverer or similar. We have installed the developer suite and have downloaded Oracle Application Server 10g. We are able to create queries using discoverer and reports using the report builder.
My question is this - once i have created my reports (in .jsp format i believe), is it possible to host these using the application server?
The users need to log into a website or similar and select the report they need to run.
Any help would be appreciated - as i say, sorry for probably a silly question!!
Many thanks,
James.

Hi!
The answer is yes and the details on how is in the docs, see the link below.
http://download-east.oracle.com/docs/cd/B14099_19/bi.1012/b14048/toc.htm
It would be a too lengthy thread trying go through all the details...
You can also publish your Discoverer Workbooks using Portal as the frontend publishing platform
http://download-east.oracle.com/docs/cd/B14099_19/bi.1012/b14465/toc.htm
/Mikael

Basic help for an Iphone newbie - (Sorry!)

Hi there,
I am thinking about getting an Iphone but I simply cannot find definitive answers for the following.
Can you guys help?
Am I right in saying that the iphone does NOT have the following:-?
Bluetooth
Video Camera
MMS Facility
Sat Nav Facility
Also if anybody can advise if it is actually worth all the hype and money then feel free to let me know.
I really hope it is!!
Thanks in advance for your time.
Steve

While it's true that the iPhone lacks some of those things that many people have come to expect, for me it is definitely worth the hype. I bought mine an hour after they went on sale here in the US, and haven't come close to regretting it for one second. It's not a PERFECT phone, it has it's flaws, but it's is so much sweeter than anything else I've had that I can't even describe it. I was in Best Buy yesterday and from curiosity I browsed through the cell phone section. I found myself and scratching my head at almost every phone there. I can't imagine going back to any of those. The thing that surprised me the most was the smartphones with the tiny keyboards. I had to wonder why all the talk about the iPhone's touchscreen keyboard vs. the other smartphones "tactile" keyboard. My thought is that the only reason so many people say they prefer having actual buttons to push is simply because that is what they've become used to. I've never used a smartphone, but when I picked up the blackberry's and whatnot, I realized immediately that those would be no easier to use for me, starting from scratch, than the iPhone's keyboard. Matter of fact, I might even give the edge in ease of use to the iPhone keyboard. Again, this is from someone who had never used either before June 29th. Bottom line, iPhone has flaws. It's not perfect, it's not a "Jesus phone", but it's still pretty **** sweet.

Help for Submit in conjucture with paaremeterised Transaction

Hio All.
Please help me with the following scenario!
1.We have a parameterised Transaction (ZPPP03)of sm31 to open a view ZPPP.
so when i run the Transaction i see all the entries pertaining to different sales organisation.
2. Now we need to filter data absed on sales organisation. So that is user enters ITA only those need to be displayed via the Paremeterised Transdaction(ZPPP03)
3. I have made a report(ZREPORT) that calls my Transaction ZPPP03.
4. I have mde another report wherein im calling ZREPORT using sumit stamanet and passing the paarmeter that is sales organisation.
PARAMETERS:P_ORG TYPE ZPPP003-VKORG.
report = 'ZREPORT'.
clear seltab.
seltab-selname = 'D0100_FIELD_TAB-LOWER_LIMIT'.
seltab-kind    = 'P'.
seltab-sign    = 'I'.
seltab-option = 'EQ'.
seltab-low     = P_ORG.
append seltab.
SUBMIT (report) WITH SELECTION-TABLE seltab.
But when i run this this does not seem to be using the valu i asked?
What should i do?
Please let me know lucidly!

Hi,
Make use of FM 'VIEW_MAINTENANCE_CALL' to see if it suffices your requirment.
See my sample code.
PARAMETERS: y_p_lgnm TYPE lgnum.
DATA : y_v_string   TYPE string.
CONSTANTS: y_k_u        TYPE char1   VALUE 'U',
           y_k_x        TYPE char1   VALUE 'X',
           y_k_lgnum    TYPE char7   VALUE 'LGNUM',
           y_k_lgtyp    TYPE char5   VALUE 'LGTYP',
           y_k_eq       TYPE char2   VALUE 'EQ',
           y_k_viewname TYPE tabname VALUE 'YLOMANAGTROL'.
*                   INTERNAL TABLE DECLARATION.
DATA: y_i_seltab TYPE STANDARD TABLE OF vimsellist.
*                   WORKAREA DECLARATION.
DATA: y_wa_seltab TYPE vimsellist.
START-OF-SELECTION.
*authority check for warehouse number
AUTHORITY-CHECK OBJECT 'L_LGNUM'
              ID y_k_lgnum FIELD y_p_lgnm
              ID y_k_lgtyp FIELD '*'.
IF sy-subrc NE 0.
* user not authorised
    CONCATENATE y_p_lgnm text-003 INTO y_v_string SEPARATED BY space.
    MESSAGE s015(ylo1) WITH text-001
                            sy-uname
                            text-002
                            y_v_string.
ELSE.
*Clear Internal Table
    CLEAR y_i_seltab.
    CLEAR y_wa_seltab.
*passing the selection parameters to the function module
*view_maintenance_call.
    y_wa_seltab-viewfield = y_k_lgnum.
    y_wa_seltab-value     = y_p_lgnm.
    y_wa_seltab-operator = y_k_eq.
    APPEND y_wa_seltab TO y_i_seltab.
    CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
      EXPORTING
        action               = y_k_u
        view_name            = y_k_viewname
        show_selection_popup = y_k_x
      TABLES
        dba_sellist          = y_i_seltab.
ENDIF.
Regards,
Ankur Parab

Help For a (Somewhat) Newbie

First, with all the Posts I see here, this topic may very well have already been covered, so I apologize in advance if it has.
I recently purchased a Linksys WRT54G Wireless Router. I am currently using a Linksys BEFSR41 (wired) Router, so I am somewhat familiar with how they work.
I purchased the Linksys WRT54G Wireless Router so that I could connect with my Son's Dell Laptop (wirelessly). Right now, there's a 50 foot cable leading from the BEFSR41 to his bedroom.
The BEFSR41 installed flawlessly, as I recall. Just hook the cable modem to the proper port, 1 cable to my computer, and 1 to his, install the software, and it works flawlessly.
When I tried to install the WRT54G, I ran the software, hooked the cable modem to the [proper] port, then hooked the cable to my computer and.....NOTHING! No cable connection, Zilch! I even tried using the Network Connection Wizard (WinXP w/ all current SP's).
One thing I didn't do. I didn't purchase a separate network or USB antenna for the laptop, as it has wireless networking built in. Second, I'm using "Pure Networks Port Magic," a little gift which materialized from AOHell at some point in time.
I've never gone into the inner workings of either Router, other than type the classic 132.168.1.1 or whatever just to see what was in there. I've never "tinkered" with any of the settings.
Any help appreciated. The directions seem pretty straightforward and lead me to believe that it practically sets itself up.
Bob

Many cable ISPs lock down the internet connection to a single device at a time. For that they remember the MAC address of the router or computer which is connected to the modem. They usually reset this after some time of inactivity or sometimes when you power down and up everything again.
Thus you could just power down everything and wait a night to see if the WRT connects then.
The alternative is to change the MAC address on the WRT to the MAC address of the BEF. You can use the MAC address clone function in the router through http://192.168.1.1/ Clone the MAC address of the BEF which should be printed underneath the router.
Another alternative could be to set the WRT up as access point behind the BEF. (Be sure to deactivate the MAC address clone on the WRT again if you tried it before!) See this post for how to setup the WRT as access point behind the BEF.
This kind of setup has the advantage for you that you are more free to position the WRT in the best location for your whole home.
As you are running a cable at the moment anyway: if your son does some gaming or other bandwidth intensive things he will probably more happy with the wired connection than the wireless. Depending on the obstacles between router and computer and other wireless networks in the proximity the wireless signal can degrade quickly leaving you with 1 Mb/s or less. For any online game that will be not enough...

Help for a java Newbie please!

Hey guys I'm writing this program for my Java 1 class I can't seem to get it complie. This is the first time we've worked with building out own classes. And I have a feeling that I'm doing something small and silly. If someone could just take a look at it I'd be more than happy.
This is the Class we had to write it has 4 different fields of "employee information" This one looks fine.
public class Employee
   private String name;
   private int idNumber;
   private String department;
   private String position;
   public Employee(String theName, int theIdNumber, String theDepartment,
                    String thePosition)
         name = theName;
         idNumber = theIdNumber;
         department = theDepartment;
         position = thePosition;
   public void setName( String theName )
         name = theName;
   public void setIdNumber( int theIdNumber )
            idNumber = theIdNumber;
   public void setDepartment( String theDepartment )
            department = theDepartment;
   public void setPosition( String thePosition )
            position = thePosition;
   public String getName()
            return name;
public int getIdNumber()
          return idNumber;
public String getDepartment()
              return department;
public String getPosition()
           return position;
} I think this one is good, it compiles just fine.
Now we had to write a program that accesses the class and store "employee information" for 3 different employees and recall it. It only recalls for one right now, it doesn't compile though... sad day. Any help would be AMAZING THANKS in advanced.
import javax.swing.JOptionPane;
public class EmployeeInfo
   public static void main(String[] args)
       String firstEmployeeName = "Susan Meyers";
       String secondEmployeeName = "Mark Jones" ;
       String thridEmployeeName = "Joy Rogers";
       int firstEmployeeId = 47899;
       int secondEmployeeId = 39119;
       int thirdEmployeeId = 81774;
       String firstEmployeeDepartment = "Accounting";
       String secondEmployeeDepartment = "IT";
       String thirdEmployeeDepartment = "Manufacturing";
       String firstEmployeePosition = "Vice President";
       String secondEmployeePosition = "Programmer";
       String thirdEmployeePosition = "Engineer";
       Employee Employee1 = new Employee();
       Employee1.setName(firstEmployeeName);
       Employee1.setIdNumber(firstEmployeeId);
       Employee1.setDepartment(firstEmployeeDepartment);
       Employee1.setPosition(firstEmployeePosition);
       Employee Employee2 = new Employee();
       Employee2.setName(secondEmployeeName);
       Employee2.setIdNumber(secondEmployeeId);
       Employee2.setDepartment(secondEmployeeDepartment);
       Employee2.setPosition(secondEmployeePosition);
       Employee Employee3 = new Employee();
       Employee3.setName(thirdEmployeeName);
       Employee3.setIdNumber(thirdEmployeeId);
       Employee3.setDepartment(thirdEmployeeDepartment);
       Employee3.setPosition(thirdEmployeePosition);
       JOptionPane.showMessageDialog(null, "Name          ID Number   " +
                                     "Department      Position     /n" +
                                     Employee1.getName() + "   " +
                                     Employee1.getIdNumber() + "   " +
                                     Employee1.getDepartment() + "      /n");
System.exit(0);
}

Also the compiling error I get is
O:\HomeWork\CIS 260\Assignment 5\EmployeeInfo.java:28: cannot find symbol
symbol : constructor Employee()
location: class Employee
       Employee Employee1 = new Employee();
                               ^
O:\HomeWork\CIS 260\Assignment 5\EmployeeInfo.java:39: cannot find symbol
symbol : constructor Employee()
location: class Employee
       Employee Employee2 = new Employee();
                               ^
O:\HomeWork\CIS 260\Assignment 5\EmployeeInfo.java:50: cannot find symbol
symbol : constructor Employee()
location: class Employee
       Employee Employee3 = new Employee();
                               ^
O:\HomeWork\CIS 260\Assignment 5\EmployeeInfo.java:52: cannot find symbol
symbol : variable thirdEmployeeName
location: class EmployeeInfo
       Employee3.setName(thirdEmployeeName);
                            ^
4 errors

Help for a new newbie

i've just tried to compile my very first Java program, and i get the following error:
Exception in thread "main" java.lang.NoClassDefFoundError: saluton
i have no idea what this means, if its any help i'm running win 2000
i'd be greatfull of anyhelp given

Jos
i bow down to you, thank you i have no idea what -cp is but it workedThat -cp flag tells the java virtual machine where it can find .class files, i.e. it
defines the ClassPath. Suppose those two .class files are stored in, say,
c:\usr\Stu000 and suppose your current directory is somewhere else, say, you're
roaming around in c:\tmp.
From within that c:\tmp directory, you can do this:java -cp c:\usr\Stu000 Salutonand it will simpy work. BTW, you can define more than one directory as the ClassPath,
you simply supply more dirs and separate them with a semi-colon. The Java
virtual machine will look in all those directories for the specified .class file to run.
i have now compiled and run my first Java programCongrats.
kind regards,
Jos

Help for a total newb with e65

Similar Messages

Maybe you are looking for