Help for authorization code for Premiere Pro 2.0

Guys, please help

CS2 Activation Server http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
What is says...
Adobe has disabled the activation server for CS2 products, including Acrobat 7, because of a technical issue. These products were released more than seven years ago, do not run on many modern operating systems, and are no longer supported. Adobe strongly advises against running unsupported and outdated software. The serial numbers provided as a part of the download may only be used by customers who legitimately purchased CS2 or Acrobat 7 and need to maintain their current use of these products

Similar Messages

  • Graphics card HELP for premiere pro CC

    So I've spent hours reading numerous forums in regards to what graphics card is best suitable for premiere pro cc that isn't overly priced (I.e. Quadro k4000 and 5000) I'm trying to stick in the 400-500 range for the PC I'm in the process of building. I need to know anyone's recommendations for a GOOD graphics card that isn't so expensive? I know they exist, I'm just not sure which fits best for premiere pro CC as well as the rest of adobe CC. I mean I hear people mentioning AMD vs quadro and GTX 680, etc. I know there's a list of approved cards from adobe, but that isn't what I'm looking for. I want one that will give excellent performance without emptying my wallet costing so much.  Please, any suggestions are greatly appreciated, thanks guys!
    -Andy

    Actually, I tend to agree with cc. That i7-4770 cannot be overclocked at all - not even in a limited manner (outside of the normal turbo boosting) - to start with (the maximum multiplier on the Haswell i7 CPUs is permanently locked to its nominal stock setting or its maximum stock turbo setting, depending on how the motherboard BIOS reads the settings). Second, that i7 has only four physical cores (albeit with hyperthreading). Third, no single non-RAID 7200 RPM hard disk has a sustainable maximum transfer speed above 190 MB/s even on the outer tracks (where the transfer speed is typically highest). As a matter of fact, I tested my auxiliary PC that's equipped with an i5-2400 and 16GB of RAM, and tested it with both older-generation GPUs (a GTX 560 non-Ti and a GTX 560 Ti 448-core), and while the GTX 560 Ti 448-core did perform about 50 percent faster than the plain GTX 560 (39 seconds versus 59 seconds - or put it in converse, the GTX 560 performed one-third slower than the GTX 560 Ti 448) in the MPEG-2 DVD test of the PPBM6 suite, the real-world improvement does not come anywhere close to the benchmarked difference (with either GPU, the i5 system took between an hour and an hour and a half to convert 40 minutes of HD material to MPEG-2 DVD using the VBR 2-pass method). This means that with such longer material, the CPU and memory performance comes more into play.
    Oh, did I forget to mention that Western Digital and its HGST subsidiary are the only brands that offer a consumer-level (desktop, as opposed to enterprise) 4TB hard drive that spins at 7200 RPM? (Seagate's 4TB hard drive spins at only 5900 RPM while Toshiba does not currently offer a consumer-level 4TB hard drive.) Outside of WD and HGST, you'll have to buy a much more expensive enterprise-level drive to even find a 4TB drive that spins at 7200 RPM.
    And unfortunately, at current street prices, the lower-end GT/GTX 6xx series GPUs are just too expensive for their performance. In fact, the GTX 650 Ti Boost and the GTX 660 are both priced too close to that of a GTX 760 for their own good right now (unless you go for a card that's equipped with the less desirable 1GB VRAM configuration based on either of those GPUs).

  • A help for Premiere Pro Creative Cloud

    I AVDHC A camera Canon HF 100 and I can not bring it into line on Premiere Pro Also, if I download The clips on my hard disck and then the amount of Premiere Pro And although the latter appear in the Project panel then I can not drag them to the Time Line, the cursor turns into a little hand with the symbol of Prohibition.
    Using an iMac running OS X 10.8 Mountain Lion

    These links will tell you how to copy the entire file structure from your camera to your hard drive
    Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
    -and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html
    -http://helpx.adobe.com/premiere-pro/using/importing-assets-tapeless-formats.html
    For CS5 and later, the easy way to insure that your video and your project match
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
    -and a FAQ on sequence setting http://forums.adobe.com/message/3804341

  • How to search for Premiere Pro Help, tutorials, and so on

    Use a custom-made search engine when searching  for Premiere Pro information.
    I'm always accepting input for how to make the custom search better.

    Maybe this thread (or similar) should be a "sticky" ?
    PS! I haven't looked "all over the place" so maybe it is in some kind of way??, at least I hope so...
    Dag

  • FAQ: What are the best resources for Premiere Pro CS6?

    Here are high quality resources for troubleshooting and tutorials related to Premiere Pro CS6.
    Premiere Pro CS6 troubleshooting articles
    Issue: I'm having trouble downloading and installing Premiere Pro CS6. What do I do?Answer: See troubleshooting documents, post in the appropriate forum, or contact support.
    More info: http://blogs.adobe.com/aftereffects/2013/09/troubleshooting-issues-with-downloading-and-in stalling-after-effects.html
    Issue: What are the system requirements for Premiere Pro CS6?See this article: http://helpx.adobe.com/premiere-pro/system-requirements.html#Adobe%20Premiere%20Pro%20CS6% 20system%20requirements
    Issue: Why won't Premiere Pro CS6 play back AVCHD media?Answer: Update to Premiere Pro CS6 (6.0.5). Previous versions of CS6 had this issue.
    More info: http://blogs.adobe.com/premierepro/2013/08/premiere-pro-cs6-6-0-4-update.html
    Issue: Does Premiere Pro CS6 work with OS X 10.9 (Mavericks)?Answer: Yes, make sure you update to Premiere Pro CS6 (6.0.5)
    More info: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
    Issue: Is there a trial available for Premiere Pro CS6?Answer: Yes, subscribe to the free version of Creative Cloud, then download the trial.
    Issue: I'm having unexpected behavior in Premiere Pro CS6 and want to trash preferences. How do I do that?Answer: See this blog post: http://blogs.adobe.com/genesisproject/2011/02/premiere-pro-cs5-maintenance-two-great-tips. html#more-537
    Issue: I'm getting errors related to QuickTime. What do I do?Answer: See this blog post for troubleshooting items related to QuickTime: http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
    Premiere Pro CS6 tutorials
    Issue: I'm new to Premiere Pro CS6. How do I get started?Answer: See this blog post: http://blogs.adobe.com/kevinmonahan/2011/05/20/getting-started-with-adobe-premiere-pro-cs4 -cs5-cs5-5/
    Issue: I'm switching to Premiere Pro CS6 from Final Cut Pro 7. Are there any tips for me?Answer: See this article by Scott Simmons on Pro Video Coalition: http://provideocoalition.com/ssimmons/story/105_adobe_premiere_pro_cs6_questions_answered
    Issue: I just switched to Premiere Pro CS6 from Final Cut Pro 7. Are there any missing features between the applications?Answer: See this article: http://provideocoalition.com/ssimmons/story/10_fcp_things_fcp_editors_might_be_missing_in_ adobe_premiere_pro_cs6
    Issue: Are there any good, free Premiere Pro CS6 tutorials available?Answer: See these tutorials: http://library.creativecow.net/series/Premiere-Pro-Basics-CS6--above-with-Andrew-Devis
    Issue: How do I optimize Premiere Pro CS6 for best performance?Answer: See this article: https://www.video2brain.com/en/courses/after-effects-premiere-pro-performance-workshop
    Issue: How do I operate the multicam function in Premiere Pro CS6?See this article: http://provideocoalition.com/ssimmons/story/working_with_multicam_in_adobe_premiere_pro_cs 6

    Hi ..
    GO to website www.Apache.org
    down load Apache tomcat server .
    install it ...
    Go to sun site
    c and download jsp tutorials ...
    Go to
    (www.coreservlets.com)download book core servlets
    u can find lots of nice books supported by sun on sunwebsite ...
    Now u r equipped ....
    start doing everything (R &D) on server ..
    Join This JSP forum and ask any thing u didnt got ..or learn or get confused..
    I thing once u go through this ..it will do all what u want
    Hope it helps
    Best of Luck :)
    regds & take care

  • Is there no User Guide for Premiere Pro CS6?

    I am a FCP7 refugee trying to decide between Avid and PP CS6. After waiting for a few weeks for it to be available, I have been lookiig through the PP CS6 Help PDF. I was surprised to see that it is not a complete reference guide documenting the features of the application, but instead a mish-mash of short descriptions, with numerous links to videos, documents from earlier versions, and other external locations where one has to go to get the actual information--not very helpful as a guide to the application. Is there actually no comprehensive user guide from Adobe in a single document or PDF? Or is the only way to get information about the application to navigate through all these disjointed materials?
    If there is such a user guide, I would very much like to know where I can find it. If there isn't, I would have to count this as a very big factor in favor of deciding to go with Avid. This is particularly true given the absence of any current third-party books on PPro CS6, although such books are hardly a substitute for a well written and comprehensive user guide, something which is also true of the help PDF.

    Groppler wrote:
    Since the links are to the on-line CS6 help and the PDF version of that help, both of which are a collection of materials concerning CS5, CS5.5 and CS6...
    Yes, for CS6, new information was added to the CS5/CS5.5 documentation. We had to go this route because we are working with brand new documentation software. There simply was not enough time to integrate the software and complete a whole new set of documentation. Believe me, it was enough of a challenge integrating the old system with the new one--in addition to creating the articles for new features, and the connective tissue between them.
    There is only one person that does the docs for Premiere Pro, and that is me. I have limitations and guidelines I must follow, so I hope you understand.
    Groppler wrote:
    ...with links to external sources you have to go to for information, I guess the answer to my question is that there is no true user guide for Premiere Pro CS6 that one can go to for comprehensive information about the application...
    No, this is the Help. It has BOTH the comprehensive details about the software and community content where you can see how people are actually using the software. If the Help is lacking details about any feature, please alert me and I will include those details. I work directly from the engineering documentation and include every detail I can about any feature.
    Since my time is limited, I don't always have time to make supplemental materials like video tutorials, or articles. That's why I link to them. The crucial info is included in the docs, the community content is material that I personally approve as helpful and supportive to the documentation.
    Groppler wrote:
    ...without sorting through irrelevant information or navigating to all these third-party sites to see if they have information you are looking for.
    None of the community content is irrelevant. I sort through it all very carefully. Community content is supportive and helpful to users. It should not be necessary to sort through these tutorials as the info should be right in the docs. Community content is supplemental. If you don't find the information you were looking for in the docs themselves, create a comment right on the Help page and I'll see to it that it gets fixed ASAP.
    Groppler wrote:
    I am quite surprised by this and think the absence of a real user guide is a significant shortcoming of Premiere Pro, not shared by other products on the market.
    It is a real user guide. I'm sorry you don't feel that way. If you want a doc with only Premiere Pro CS6 info in it, I can understand that request. Unfortunately, that was impossible for this round.
    If you have any suggestions for the next round of Help documentation, a better place than here would be the Community Help forum. Please voice your concerns there, as the people that actually make decisions about Help are hanging out there.

  • Optimal Hard Drive Configuration for Premiere Pro CS5 and Pro Tools

    I am in the process of upgrading a workstation that is used primarily for multi-track audio recording in Pro Tools to use the following Adobe CS5 products for production of promotional videos in HDV (and AVCHD for the web) as well as printed marketing materials for bands and musicians: Premiere Pro, Encore, Photoshop, Illustrator and Soundbooth.
    Since Premiere Pro is probably the most demanding application of the group, I have been studying the suggested hardware configurations on this forum with great interest, particularly HARM's suggestions (including his Generic Guideline for Disk Setup) to determine which hard drives to purchase and the optimal manner in which to configure them.
    I am upgrading an HP Z800 with dual quad core 2.44 GhZ processors with hyperthreading (16 virtual cores), 12 GB of memory and an overclocked GeForce GTX 470.  Without setting up a RAID configuration (which I cannot afford at the moment), I would like to use the 4 available HDD bays in the Z800 in the optimal manner for Premier Pro, using currently available drives.  I am currently considering purchasing a 300GB VelociRaptor to use as my C drive because of the extended load times and demands placed on the drive by ProTools and the associated Waves plug-ins.
    I would appreciate suggestions to improve my following plan:  C (300GB  WD VelociRaptor) for OS and Programs; D (1 TB WD Black Caviar) for Media and Projects; E (1 250 GB WD Black Caviar) for Pagefile (approx. 18 GB) and Media Cache; and E (2 TB WD Black Caviar) for Previews, Exports and Pro Tools audio files.
    I have great respect for the knowledge of the members of this forum and eagerly await your suggestions.
    /Bill

    I very much appreciate the responses to my email because I know that all of your time is valuable and that you have chosen to use some of that valuable time to help an unknown individual.  This forum is remarkable because of the wealth of knowledge available and the willingness of so many to assist others.
    I now wish to narrow my questions to save you time and so that I can get specific advice.  I may not have not been clear that I have already upgraded to the HP Z800 with dual quad core processors and overclocked GTX 470, primarily for the improved performance it will provide in ProTools.  My question now is how to optimize its performance for Premiere Pro CS5.  Based upon my research, I am considering the following two upgrades, but I am open to other suggestions if they would provide better results at a similar cost
    1. I am considering purchasing a 600GB WD VelociRaptor ( WD6000HLXH) for my C drive on which I would place OS (Windows 7, 64 Bit) and programs in an effort to reduce loading times of large programs.  I have two questions: (1) Are members of the forum seeing a significant improvment in program loading times with the VelociRaptor because I am still not convinced that the price performance of SSD's justifies their use; and (2) There are so many models of VelociRaptors now that I want to be certain that I am purchasing the best version for my needs.  In addition to the usual 10000 RPM speed, this model has 32MB Cache and a 3.5" form factor as well as a SATA 6.0GB/s interface (which I doubt my motherboard can take advantage of but it might extend the useful life of the drive with future configurations).
    2. I currently have available for installation in the Z800 the following drives:  (1) WD 2TB Black Caviar; (1) WD 1TB Black Caviar; (2) Hitachi 1TB.  I believe that the Z800 can accept up to 5 SATA hard drives which I will have if I purchase the Velociraptor.  Although I am reasonably knowledeable when it comes to hardware, I have never set up a RAID configuration.  Therefore, it would be helpful if someone could recommend one of the various RAID configurations and brieflyexplain why it would seem to be best for my needs.  I can then focus my research on understanding that one configuration.
    I was planning to follow Scott's suggestion for my current 3 drives:  OS and programs on C (WD 600 GBVelociRaptor), media and projects on D (WD 1TB Black Caviar), export files and Pro Tools files (all live musician tracks, no samples) on E (WD 2TB Black Caviar).  However, I have been reading about the benefits of a RAID configuration so I am interested in further suggestions now that I have clarified my questions.
    Thank you all for your help.
    Bill

  • Lence flare plugin for premiere pro cc

    I need some help finding a great lence flare plugin 3d for premiere pro cc. Can somebody direct me to the right stuff ..   Thanks .

    Yes, Thanks .. Your right ... for this time in desided two make my own lenceflares in PS and animate in Premiere .. It took a long time, but i saved my money. I dont have AE, but mabye i should upgrade. I am novice to filmmaking, - .. I'm a Photographer and strong in Photoshop.
    Thanks all for your input , prices of plugins is very high - but my labor is not. 

  • Film lense flare for premiere pro

    I need some help finding a great lence flare plugin 3d for premiere pro cc.
    Can somebody direct me to the right stuff ..
    Thanks .

    Hi Jason,
    Thanks for the response and offers of help.  This is my first dance with NLE andusing CS5 suite, so I'm finding my way as I go with this first project.  I also confess not understanding all the details regarding the relationships between project settings and imported materials such as film transfers.  So I appreciate your help.
    Yes, I am finishing this documentary on video for DVD release.
    My project settings are 23.976, 720x480 (1.2121)
    I would like to avoid the DVCAM transfers in order to avoid the rental expense for a deck and instead transfer to DVD-RAM files.  I can't see any downside to doing it that way.  But if there is a glitch in this choice, I will gladly go with DVCAM tape and just rent a deck for the weekend.  I recorded my sync audio on my 744T via 23.976 48K, so I need to keep the MOS frame rate consistent in the transfers, yes?  Although this too presents no real problems as I can change the headstamp on the audio files to match whatever TC frame rate I want. No, I need to maintain full frame during transfers even though the 16mm footage is 4:3 and the project is 16X9.  So I suppose I would ask for a letterbox transfer and just live with the black bars in the edit, correct?
    Don't understand why going to Beta, D-Beta or DVCAM would automatically retain the 4:3 ratio.
    Yes, I will be synching footage and having the lab do an MOS transfer.
    Yeah, I am about to call the lab and discuss with them.  I just wanted to glean as much knowledge before calling so I could speak intelligently on my needs.  Unfortunately, I will not be able to attend the transfer session as I am across the country from them.
    Thanks again, Jason for your help.
    Tom

  • I renewed my membership for premiere pro and I still can't use the app, what should i do

    I renewed my membership for premiere pro and I still can't use the app, what should i do

    Hi Lara,
    Lara Puharic wrote:
    I renewed my membership for premiere pro and I still can't use the app, what should i do
    Why can't you use it? Do you get a warning? Does the application not launch? What happens? Answering these questions will help: FAQ: What information should I provide when asking a question on this forum?
    Thanks,
    Kevin

  • I want to cancel my monthly subscription for premiere pro.

    i want to cancel my monthly membership for premiere pro. It's already paid this month but i want to cancel and do not be paid from next month. I tried to press cancel subscription button and it didn't work, so im leaving message here.

    This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
    -start here https://forums.adobe.com/thread/1703848
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    --and two links which may provide more details, if the above links don't help you
    -http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  • Is there a separate forum for Premiere Pro Creative Cloud users?

    Is there a separate forum for Premiere Pro Creative Cloud users?

    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help
    For help with using/learning Encore, go to https://forums.adobe.com/community/encore/content
    The bottom section of the tutorial link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173 (picture first posted by Ann Bens and reposted by Stan Jones)

  • Language Pack for Premiere Pro CS2 or CS3

    Hei everybody,
    i´m looking for a language pack for Premiere Pro CS2 or CS3.
    Cant find anything in the net.
    Thanks for help.
    Best Regrads
    Ad

    Ok, thanks.
    On an other page, some wrote about a language pack.
    First he had to copy the files into the C./ Adobe directory and than he had to activate it on HKEY_local_machine..
    BG

  • Where can I find Plugins / Transitions for Premiere Pro CS5 (not Cs 5.5 or 6) ?

    Hello,
    I am searching and searching for transition packs for Premiere Pro CS5, there are lots for 5.5 or 6 but none for 5. At least I could't find them.
    Any ideas anyone?
    Thanks in advance
    Alex

    https://www.adobe.com/products/premiere/extend.displayTab4.html
    Chances are most plug-ins working for the later versions will also work for CS5, but you can check with each company if you're not sure.

  • Where can I find a cheat sheet for Premiere Pro on Windows 7?

    Where can I find a printable visual cheat sheet for Premiere Pro CS6? Like this one but for PC rather than Mac. I mean showing the shortcuts for each key not just a list.
    Thanks

    here is a list of keyboard shortcuts for mac: http://support.apple.com/kb/HT1343.  For FCP ones, you may want to post in that forum: https://discussions.apple.com/community/professional_applications/final_cut_pro_ x

  • Want to try trial for Premiere Pro but for some reason the apps tab says "download error please contact customer support"

    Want to try trial for Premiere Pro but for some reason the apps tab says "download error please contact customer support"

    Kbubello for information on how to resolve download errors please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.

Maybe you are looking for

  • Camera vs. Slacker

    Hello, Im new to BlackBerry.  When I try to use the camera on the my BB Tour (Verizon) after using the Slacker Radio app, I get the following message: "Could Not start the camera. Close other applications and try open the camera again." Even when all

  • Verizon canceled my home phone by mistake and are clueless

    Verizon is the most frustrating organization I think that I have ever had to deal with. They canceled my home phone service because of a transpositon error. It took a long time to get them to admit that!!  My wife is sick with cancer and her doctors

  • URGENT INFO NEEDED  - DVD's not burning on macbook - 4 brands now tried

    Hi. I've been trying to burn photos onto DVD's all week and I've now tried 4 different brands inc sony - my mac has a superdrive and is supposed to take -R, -RW, +R and +RW. I've tried all of these and they are either not being read/ ejected as not b

  • Display logo from mime repository in the html email

    Hi Experts, I have created a report which will generate an email using SO_NEW_DOCUMENT_ATT_SEND_API1 in html format. Everything works fine except for the logo which I have saved in the  MIME repository. I am calling these two functions to get the mim

  • HTTP POST and open external result

    Hi Now I'm working through payment system. I created APEX process like this: DECLARE post_str VARCHAR2 (4000) := 'p1=A&p2=B'; req UTL_HTTP.req; resp UTL_HTTP.resp; v_buffer VARCHAR2 (1024); BEGIN req := UTL_HTTP.begin_request (url => 'http://www.some