Help for beginner

hi everybody ,
I am not new to networking and I need to get into the world of data center networking (nexus and so on...)
I am in need of some guide , where to start , what to study and focus on in terms of products & technology , design and implementation.
if you could also provide links to helpful stuff that would be great
many thanks

Here is one link and hope it helps.
http://www.cisco.com/en/US/products/ps9670/products_implementation_design_guides_list.html

Similar Messages

Basic FCP Help for beginner

Thanks in advance for looking at my post.
I have a uni project whereby i have to make a music video for a song previously recorded.
I have videoed various shots of my band playing along to the recorded song.
They all start at different times (i.e start of video clip does not match with audio clip) yet i know that over the whole song they are in time with each other as i had the drummer play along to the recording using headphones.
So what im trying to do is load up all of the clips into FCP alongside the audio, adjust the start position for the various video clips so that they synchronise with the audio, and then lock them into place.
I would then like to cut them up into clips and move the parts that i want to use down onto the main video timeline so that they are in time with the audio.
I am mainly encountering problems with having to render these 3 minute video clips just to see if they line up with the audio which is a very time consuming process. Is there any way to use the markers and tell them to lock together, that is put a marker on the audio timeline, put markers on each video clip at the same point and line them up/snap them into place.
Any help would be much appreciated, as i mentioned in the subject i am a complete apple/FCP beginner having only done basic videos where i didnt need to have such synchronicity between audio and video.
Also on a side note when i load up the video clips into the timeline, they creat new lines V2,V3 and so on. Am i right in assuming that V1 is the final rendered timeline, or does FCP show all of the V# if they have footage on them?
Tl:dr help
Message was edited by: y0ukn0ws1t

Thanks for the response, i have looked at a few video tutorials, but i cant find one that deals with multiple video takes over a common audio take.
Are v2,3 etc slates to load up video before aligning/cutting and placing onto V1 (the main video sequence)??
With regards to this video
http://library.creativecow.net/articles/harringtonrichard/final_cut_multicamedit.php
Am i right in assuming once i have lined up all the video clips to sync with the audio i can set in and out markers on the video clips to tell FCP to use the sections that i want of each take?
Message was edited by: y0ukn0ws1t

Help for beginner: Need labview signal to power on =2 actuators of 8 with one power supply

I am a beginner in using labview. I need to use labview signal to turn on >=2 ac 8 actuators with one power supply. The 24VDC, 0-3A power supply is enough to drive all 8 actuators which need 24VDC and 0.1A current. So the main function is like turning on 2 or more than 2 switches in series with the 8 actuators with one power supply. Any suggestion of some simple module for this purpose? Thanks.

Maybe I didn't say the question clear. I have one power supply (24VDC, 0-3A) and 8 solenoid valves (24VDC and 0.1A). Two valves (or more than two in future) have to be activated each time. I would like to find something that can work like switches installed in series with the valves. Then I can wire the valves (with the switches) in parallel with the power supply. As I turn the switches on and off with signals from Labview board, power to that specific valve will be turned on and off.
Any advice for this kind of switches or any module that can be controlled by Labview signal? Please help! Thanks.

Going to Previous Tracks- Help for beginner

Due to the length of my project and the need for chapter markers, instead of making one long track with over 100 markers, I've created 20 tracks with six or more markers per track. My problem is, if I am on Track 6-Ch. 1, I want to press the back button on my remote to go back to Track 5- Ch. 5. I'm sure there's an easy solution that I'm missing, but I've been missing it for awhile now. Any help would be greatly appreciated. Thanks!

Why not make one track? I don't understand why you would rather make 20 tracks with six markers... can you offer more details?
Why don't you just drag all 20 video clips into the one Track (timeline)? Then it's all the same timeline in the same track and all yer chapter markers will work backward and forward.
This would be way easier than getting into stories and or scripting.
If I'm misunderstanding what you are attempting to achieve, I apologize, let me know.
Cheers!
G5 Dual 1.8 Mac OS X (10.4.4)

Intuos/Photoshop Help for Beginner

Hey There,
I'm an absolute beginner with the Intuos and not much better with Photoshop, so please forgive me if this question is a little basic for this forum. I'm going to be using the Intuous and Photoshop (or maybe Corel Painter) for a research project evaluting a computerized administration of some tests of visual perception and visual memory. I'm looking to create a permanent record of the study subjects' drawing processes, such that I could play back their individual pen-strokes in real-time, and preferably with the option to speed-up, slow down etc. Is this something that would be possibly with Photoshop? I spoke with someone at Wacom who said they were fairly sure that Photoshop or Painter did this, but they weren't sure which one.
Thanks much.

You can keep a text log of every action made in Photoshop but you will not have a record of how the user is drawing with the pen.
I would look into Camtasia which keeps a video record of all activity on the screen. It is used by many professionals to produce tutorials.
http://www.techsmith.com/camtasia.asp

Help for beginner! Photo gallery

I have found 2 templates in a free website
Here is the attachment:
www56.zippyshare.com/v/98974987/file.html
The problem I have encountered is that I have no idea in removing the stack gallery after I click the return to main menu button. Maybe you have to spend some time on the logic of the templates. But I really hope you guys can be patient to help.
Well, to be honest, I have tried whole day finding out the method through google and video tutorials. Fortunately, I think I can handle in loading the stack gallery in the first page. Like using XML codes or loading .swf.
But still can't remove/unload the gallery after I hit the return button.
So please generous guys can give me your ideas.

something like this...not quite working
function updateSlide() { // load photo, update caption and status fields
setTimeout(targetPhoto.loadPhoto(photos[currentIndex], 2000);
caption = captions[currentIndex];
statusField = (currentIndex+1) + "/" + totalSlides;

Help for beginner - forms onto iweb

Hello all, I am new to this and require some help. I have created a society website on iweb and need to incorporate a membership application form onto a page, I would like an applicant to be able to type their details onto the form and either print off or email the completed form.
Basically where do I start ?

Here's some links to get started....
https://secure.wufoo.com/
http://www.widgetbox.com/tag/communication,form
http://www.haloscan.com/

Starting up with DVD PRO STUDIO, HELP for beginner

Can anybody describe a fast and easy way to create better DVD for DVD player from a FCP projet ? I don't like the poor quality produce from iDVD and I have NEVER use DVD PRO STUDIO. When I burn DVD-R disc in iDVD, most of the time they freeze and don't play properly in friends DVD players.Is there a step by step for begginer ? From FCP to COMPRESSOR, if I have to go thru it, to DVD PRO and to my home DVD player. Nothing fancy, just fast and easy.
Merci,
Jean
ps: keep in mind, I have never open COMPRESSOR OR DVD PRO STUDIO.

Best way is to start reading the posts in this forum
Then crack the manual and do the tutorial.
Then come here with questions.
There are several threads below on creating the best looking DVDs.
Start there

Need Help for AIR Email Application

Hi,
I’m a beginner to Adobe AIR.
My new assignment is to create an AIR Application which works like MS Outlook with minimal features like compose mail, inbox, send items and contact details.
With the help of some server side script (like PHP, CF) I can make it work. But My TL asked me to communicate directly with mail server through AIR.
I googled for a week for some tutorial to help me, But I can’t find anything useful.
Is there any way to communicate directly with web server and list the Inbox, Outbox, and Contact details…? If so, please help me to find the solution…
Thanks In Advance

Hi,
You can use LaunchExecutableEx to determine the window state:
LaunchExecutableEx ("command.com /C calc.exe", LE_HIDE, NULL);
Beware that this function does not wait for the started executable to exit.
It executes the command in the string and continues.
If your application has to get the results of the call, then you need to get the application handle (3rd parameter, put a variable instead of the NULL above) and call ExecutableHasTerminated in a loop to find out if the execution finished.
Read carefully the help for the LaunchExecutableEx function and Handle parameter.
To get the result of the command line call, you can add a "> output.txt" parameter to the end of your command line call.
This way all the text output of the command is written to the output.txt file, from which you can read the result.
Check the command-line email sender program's help if there is a special paramter to make it more "verbose".
Hope this helps,
S. Eren BALCI
www.aselsan.com.tr

TechEd 2008 India is worthful for Beginner ?

Hi Experts,
I am new in SAP ABAP and want to join the TechED 2008 in india. But As I have just switch my career to SAP ABAP , so I am wondering whether it is really helpful for me to take part in it.
I am more concern about the OOPS concept , so When I am trying to search the sessions which is listed for 2008 techED, I am not able to find any topic related to OOPS.
Please kindly give me advise which course id more suitable for me as beginner.
Thanks in Advance .

Hi,
Yes it will be Useful for you definitly.
Because you are Beginning of the SAP career ,in TechEd Session you will get so many sessions on diferent SAP Technologys.
see the below link for the Sessions which will be Conducted in the TechEd.
http://www.sapteched.com/india/
Govindu

What ru the concepts to cover for beginner in sap abap

Hi fr , This is kumar , what ru the concepts to cover for beginner in sap abap

Hi Kumar,
SAP has a certification program for ABAP, according to which following courses are supposed to be covered. If you will try to cover this course, you will be at a level where you can independently program.
<i><b>1. SAP Technologies
-> SAP systems
-> Technical structure of SAP WAS
2. ABAP Workbench Basics
3. Advanced ABAP
4. ABAP Objects
5. ABAP Dictionary
6. List creation techniques(including Object oriented ALV)
7. Dialog Programming
8. Database Changes
9. Enhancements and Modifications
-> Changes to standard SAP system
-> Personalization
-> Enhancements to ABAP Dictionary elements
-> Enhancements via customer exits
-> Business transaction events
-> BADI
-> Modifications</b></i>
Following are some links which will help you to cover above points.
http://www.sap-img.com/F
http://www.sappoint.com/abap.html
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/ranges.htm
http://www.sapdevelopment.co.uk/programs/programsalv.htm
http://www.geocities.com/victorav15/sapr3/abapfun.html
http://abap4.tripod.com/SAP_Functions.html
http://sapr3.tripod.com/abap011.htm
http://abap4.tripod.com/Other_Useful_Tips.html
http://www.sap-img.com/abap/how-to-change-the-development-class.htm
Hope this helps you.
PS If the answer solves your query, plz close the thread by rewarding points to each reply.
Regards

Creating search help for a field in AdHoc Query

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Need to restrict values in F4 help for Batch Characteristic

Hi,
I need to restrict values in F4 Help for a batch characteristic based on values entered for another characteristic. I could not find any BADI or Exit for this purpose. There is a BADI CACL_VALUE which is triggered after an entry is selected from dropdown list but nothing when we press F4. I thought of using Object Dependency but I need to write a programming logic for the requirement. Please let me know if there is any way to write program in Object Dependency or any other way for this requirement.
Regards,
Nikhil

Hi nikhil simha,
first of all, find out which search help is called.
[Hierarchy of the Search Help Call|http://help.sap.com/saphelp_nw70/helpdata/en/0b/32e9b798da11d295b800a0c929b3c3/frameset.htm]
may help you.
If you know the search help, you may enhance it, but first of all you should check the where-used-list and make sure that the search help shows the requested behavior only in the context where you want it to.
If it is your own program, you may be better off to create your own search help and define the triggering fields as search help interface input fields. Then you can use the values to filter results.
Regards
Clemens

Search Help for Vendor Feild not getting populated in the Screen Element

Hi Everyone,
In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
Now that the search help exists and I can drill down the values too but when i select/choose any value, that value is not getting populated in Screen feild.
is there any validation I need to do for this.
Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
Regards,
Raj

Dear Hema,
Could you please tell me how many internal tables you are using to store the data for display.
I observerd that you have lt_stock and lt_mat2 declared in the part of the program
>DATA: lv_stock TYPE lty_stock.
>DATA: ltmat2 TYPE TABLE OF lty_mat.
you have displayed above, however you are also using ls_stock and lv_stock .
>IF p_ztotal = ' '. "line
>WRITE 18 ls_stock-matnr.
>WRITE 38 lv_stock-strgr.
>
>ELSEIF ztotal = 'S'.                             "subtotal
    >WRITE: 15 ls_stock-nrmit.
    >WRITE 32 lv_stock-dispo.
    >WRITE 43 lv_stock-fevor.
>ELSE.                                            "total
    >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
>
>ENDIF.
Are those for displaying some other information?
Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
Best Regards,
Rajesh.
Please reward points if found helpful.

Search help for SKAT-SAKNR OR SKAT-SAKNR is not working

Hi All,
I have created a Search Help for F4 in a dialog program for SKAT-SAKNR OR SKAT-SAKNR. While i click F4 on that field, it displays blank values.
Here is the module:
module HELP_FOR_SAPGL_ACC input.
CLEAR t_SAPGL.
SELECT SAKNR TXT20
    FROM SKAT
    INTO CORRESPONDING FIELDS OF TABLE t_SAPGL UP TO 1000 ROWS
    WHERE SPRAS = SY-LANGU.
   WHERE L_GL_ACC = v_FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE         = ' '
      RETFIELD               = 'SAKNR'
    PVALKEY                = ' '
     DYNPPROG               = PROGNAME
     DYNPNR                 = DYNNUM
     DYNPROFIELD            = 'SKA1-SKANR'
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
     VALUE_ORG              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
    TABLES
      VALUE_TAB              = t_SAPGL
    FIELD_TAB              =
    RETURN_TAB             =
    DYNPFLD_MAPPING        =
EXCEPTIONS
    PARAMETER_ERROR        = 1
    NO_VALUES_FOUND        = 2
    OTHERS                 = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule.
In the above code I am selecting 1000 rows from SKAT table and in the Search Help Popup it is also displaying 1000 rows but all are blank.
Please help me.
Regards,
Avaneet

Hi check my weblog on search help exit codeing..
https://wiki.sdn.sap.com/wiki/x/du0
\* Prepare for output
CALL FUNCTION 'F4UT_RESULTS_MAP'
TABLES
shlp_tab = shlp_tab
record_tab = record_tab
source_tab = lt_result
CHANGING
shlp = shlp
callcontrol = callcontrol
EXCEPTIONS
illegal_structure = 1
OTHERS = 2.
IF rc = 0.
callcontrol-step = 'DISP'.
ELSE.

Help for beginner

Similar Messages

Maybe you are looking for