Help for change language

Good morning,
suddenly my Element 10 has changed the language from English to German, how do I put the English? Thanks in advance

i just installed yosemite and now my Dutch language Photoshop elements is suddenly turned to a German version, how can I reset the language?

Similar Messages

  • Bought my Mac bookPro second hand. Help for changing apple ID

    Bought my Mac bookPro second hand. Need an Help about changing apple ID to enable me purchasing form istore

    Giving away / Selling your Mac / Resetting  the computer to the factory condition
    http://support.apple.com/kb/HT5189
    http://www.thesafemac.com/how-to-prepare-your-mac-for-sale/

  • Please Need help for change chart automaticly in report builder

    Hello,
    I have a problem under transfer Builder oracle 6i and I wish that you help me.
    I developed a report which contains a Camembert cheese, The parameters to enter are the date of edition and the code of the customer. For every customer that works very well. But when I wish to generate all the customers I have to get back the code of the customer from the request and to spend it in parameter automatically without the seizure of the code, the information of the customer is exact but the Camembert cheese generates without change and I think that I have to cross(spend) the code of the customer in parameter in the Camembert cheese but I do not know how.
    My questions:
    how to give a parameter in a Camembert cheese under graphic builder either adjournment(transfer)?
    do you have another solution so that the Camembert cheese generates for every customer?
    Thank you very much

    can someone please give a work around for this issue.
    Regards,
    Amrit

  • HT1918 Need help for changing billing information.

    I couldn't change my billing information for my Apple ID. It rejects and says,"Please contact iTunes support to complete the transactions". I did contact them but nothing helps.

    Hello,
    You should be able to bring up multiple IP's on your machine so that you can have both up until the new one takes over or the old one expires.
    I haven't done this for awhile, but I think you would use something like:
    ifconfig hme0:2 plumb
    ifconfig hme0:2 202.68.216.40 netmask 255.255.255.0 up
    route add default 202.68.216.1
    NOTE: you would need to change the hme0 to the appropriate NIC for your system, and the interface# and IP addresses as needed.
    If that works and the IP is reachable from outside, you could then update the:
    /etc/hosts
    /etc/netmasks
    /etc/defaultrouter
    And reboot. Hope this helps.

  • I recentley bought a ipod touch set all language to English, billing to English etc. The problem i have is when i open itunes or Apps store on my ipod it is in German, I'm English so don't understand German.. Can anyone help to change language in store

    I recentley bought a ipod touch 5.01,set all language to English.....every thing i view is in English except when i view (open) itunes or apps store it is in German, I live in England, I was born in England, and i speak only English. I want my itunes and apps store to open and display in English. I have messaged the apple help and telephoned the help, both was helpful but no matter what i do in setting (even in reset, which i've done) my ipod will keep reverting back to German in Itunes and Apps store. All other data in my ipod is in English........just the itunes and apps store grrrrrrrrrrrr.
    Please help :-)

    You can only use the German iTunes/App store if you are located in Germany.  The German store is in the German language.

  • Help for changing the case of a selected word of a multiline text to upper

    DBVersion:10g
    Foms Version:10g
    Hi Experts,
    Actually i have a requirement where i have to change the case of a selected word by a user into upper case.
    ex: FFFFFF hhhhh GGGG
    when user selects hhhhh and click on some button or any other option it should change it to upper case.
    plss help me out.
    regards :(
    Edited by: user123 on May 11, 2011 12:46 PM

    Here is some PL/SQL code to change a particular occurence of a word in a text.
    In this case, I change the second occurence of the "two" word:
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> set serveroutput on
    SQL>
    SQL> declare
      2   c varchar2(100) := 'one two three four one two three four one two three four' ;
      3   c2 varchar2(100);
      4   i integer;
      5   j integer := 0 ;
      6   pos integer := 1 ;
      7   occurence integer := 2 ; -- occurence to change
      8  begin
      9   loop
    10    i := instr(c,'two', pos);
    11    exit when j = (occurence-1) or i = 0;
    12    j := j + 1;
    13    pos := pos + i ;
    14   end loop;
    15   i := instr(c,'two', pos);
    16   if i > 0 then
    17     c2 := substr( c,1,i-1) || upper(substr(c,i, length('two')))
    18        || substr(c, i+length('two'));
    19   end if ;
    20   dbms_output.put_line(c2);
    21  end;
    22  /
    one two three four one TWO three four one two three four
    PL/SQL procedure successfully completed.Francois

  • Need help : for changing the flv movie size

    i am loading my flv thogh xml link if load my flv the same
    size what i kept in my folder using script shall i change the movie
    size because lot of movies is loads dynmicaly i cannot go and
    change each and evry movie
    so some body can help me to change the movie - flv while it
    loads.

    You should be able to change the product name in Google Cloud.  The ChromeBook uses Google Cloud to print (Google Cloud uses HP ePrint).  Log into your google account and change the printer name there.
    I am an HP employee.
    Opinions expressed are mine and do not necessarily reflect the opinions of HP.
    Reminder: Please select the Accept as Solution button on the post that best answers your question. Also, you may select the Kudos button on any helpful post to give that person a quick thanks.

  • Help for change Order on a form by a trigger!!!!

    I'm trying to change order (asc, desc, none) by shooting a trigger!!!
    Please Help!!?

    here is some code i wrote. hope that hepls.
    declare
    v_asc varchar2(10) := 'ASC';
    v_field_name varchar2(50);
    v_prev_orderby varchar2(200);
    v_orderby varchar2(200) := ', GIRD_AIR_DT, GIRD_START_TM,GIRD_NETWORK,GIRD_CAT||GIRD_CODE ';
    begin     
    init_orderby_bar;
    v_field_name := upper(replace(:system.trigger_item,:system.trigger_block||'.',''));
    if v_field_name = 'GIRD_CATCODE' then
         v_field_name := 'GIRD_CAT||GIRD_CODE';
    end if;
    v_prev_orderby := upper(get_block_property('GTT_INTRSCH_RANK_DATA',order_by));
    if v_prev_orderby like '%'||v_field_name||' ASC%' then
         v_asc := 'DESC';
    set_item_property(:system.trigger_item,font_style,font_italic);
    else
         v_asc := 'ASC';      
    set_item_property(:system.trigger_item,font_style,font_plain);
    end if;
    v_orderby := v_field_name||' '||v_asc||replace(v_orderby,', '||v_field_name,'');
         set_block_property('GTT_INTRSCH_RANK_DATA',order_by,v_orderby);
    set_item_property(:system.trigger_item,font_weight,font_bold);
    --     key_exeqry;
    execute_trigger('when-tab-page-changed');
    end;     

  • Errorlog filling with changed language setting and changed database context messages

    On one of my servers, the ERRORLOG is filling with messages for "Changed language setting to..." and "Changed database context..." for every single connection.  They are generated for any kind of connection--such as Management Studio.
     How did this get turned on?  How do I suppress the messages in the errorlog?  This is the only server that's having the problem.
    Example at the bottom.
    SQL is: SQL 2008 R2 SP2 
    Trace flags set on this server are 3226, 1118, 1117
    Date,Source,Severity,Message
    01/24/2014 11:23:14,spid65,Unknown,Changed language setting to us_english.
    01/24/2014 11:23:14,spid65,Unknown,Changed database context to 'master'.
    01/24/2014 11:23:14,spid64,Unknown,Changed language setting to us_english.
    01/24/2014 11:23:14,spid64,Unknown,Changed database context to 'master'.
    01/24/2014 11:23:13,spid64,Unknown,Changed language setting to us_english.
    01/24/2014 11:23:13,spid64,Unknown,Changed database context to 'master'.
    01/24/2014 11:23:13,spid55,Unknown,Changed language setting to us_english.
    01/24/2014 11:23:13,spid55,Unknown,Changed database context to 'master'.
    01/24/2014 11:23:11,spid55,Unknown,Changed language setting to us_english.
    01/24/2014 11:23:11,spid55,Unknown,Changed database context to 'master'.
    01/24/2014 11:23:05,spid61,Unknown,DBCC execution completed. If DBCC printed error messages<c/> contact your system administrator.
    01/24/2014 11:23:05,spid61,Unknown,The error log has been reinitialized. See the previous log for older entries.
    01/24/2014 11:23:05,spid61,Unknown,Logging SQL Server messages in file 'F:\SysDB\Program Files\Microsoft SQL Server\MSSQL10_50.ETL\MSSQL\Log\ERRORLOG'.
    01/24/2014 11:23:05,spid61,Unknown,Authentication mode is MIXED.
    01/24/2014 11:23:05,spid61,Unknown,System Manufacturer: 'HP'<c/> System Model: 'ProLiant DL580 G5'.
    01/24/2014 11:23:05,spid61,Unknown,Server process ID is 20096.
    01/24/2014 11:23:05,spid61,Unknown,All rights reserved.
    01/24/2014 11:23:05,spid61,Unknown,(c) Microsoft Corporation.
    01/24/2014 11:23:05,spid61,Unknown,Microsoft SQL Server 2008 R2 (SP2) - 10.50.4000.0 (X64) <nl/>
    Jun 28 2012 08:36:30 <nl/> Copyright (c) Microsoft Corporation<nl/>
    Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)

    Here's the relevant parts of the startup from today.  I snipped out some specific database info (noted with ...), but the main events are still there.
    ... [Several lines of changed database context/changed language]
    01/24/2014 10:03:33,spid52,Unknown,Changed database context to 'master'.
    01/24/2014 10:03:33,spid51,Unknown,Changed language setting to us_english.
    01/24/2014 10:03:33,spid51,Unknown,Changed database context to 'master'.
    01/24/2014 09:59:44,spid6s,Unknown,Recovery is complete. This is an informational message only. No user action is required.
    01/24/2014 09:59:40,spid11s,Unknown,Service Broker manager has started.
    01/24/2014 09:59:39,spid11s,Unknown,The Database Mirroring protocol transport is disabled or not configured.
    01/24/2014 09:59:39,spid11s,Unknown,The Service Broker protocol transport is disabled or not configured.
    01/24/2014 09:59:35,spid28s,Unknown,CHECKDB for database 'userdb' finished without errors on 2014-01-19 12:19:29.640 (local time). This is an informational message only; no user action is required.
    01/24/2014 09:59:25,spid10s,Unknown,Starting up database 'tempdb'.
    01/24/2014 09:59:25,spid14s,Unknown,CHECKDB for database 'msdb' finished without errors on 2014-01-19 12:20:23.410 (local time). This is an informational message only; no user action is required.
    01/24/2014 09:59:25,spid16s,Unknown,CHECKDB for database 'userdb' finished without errors on 2014-01-19 12:21:44.847 (local time). This is an informational message only; no user action is required.
    01/24/2014 09:59:23,Server,Unknown,SQL Server is now ready for client connections. This is an informational message; no user action is required.
    01/24/2014 09:59:23,Server,Unknown,The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x2098<c/> state: 15. Failure to register an SPN may cause integrated authentication to
    fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
    01/24/2014 09:59:23,spid10s,Unknown,Clearing tempdb database.
    01/24/2014 09:59:23,spid31s,Unknown,Starting up database 'userdb'.
    01/24/2014 09:59:23,spid14s,Unknown,Starting up database 'msdb'.
    01/24/2014 09:59:23,spid10s,Unknown,CHECKDB for database 'model' finished without errors on 2014-01-19 12:20:20.393 (local time). This is an informational message only; no user action is required.
    01/24/2014 09:59:23,spid11s,Unknown,A new instance of the full-text filter daemon host process has been successfully started.
    01/24/2014 09:59:23,Server,Unknown,Dedicated admin connection support was established for listening locally on port 53067.
    01/24/2014 09:59:23,Server,Unknown,Server is listening on [ 127.0.0.1 <ipv4> 53067].
    01/24/2014 09:59:23,Server,Unknown,Server is listening on [ ::1 <ipv6> 53067].
    01/24/2014 09:59:23,Server,Unknown,Server named pipe provider is ready to accept connection on [ \\.\pipe\MSSQL$ETL\sql\query ].
    01/24/2014 09:59:23,Server,Unknown,Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\ETL ].
    01/24/2014 09:59:23,Server,Unknown,Server is listening on [ 'any' <ipv4> 50537].
    01/24/2014 09:59:23,Server,Unknown,Server is listening on [ 'any' <ipv6> 50537].
    01/24/2014 09:59:23,Server,Unknown,Server is listening on [ 'any' <ipv4> 5427].
    01/24/2014 09:59:23,Server,Unknown,Server is listening on [ 'any' <ipv6> 5427].
    01/24/2014 09:59:23,Server,Unknown,A self-generated certificate was successfully loaded for encryption.
    01/24/2014 09:59:22,spid6s,Unknown,Server name is 'MYSRV\ETL'. This is an informational message only. No user action is required.
    01/24/2014 09:59:22,spid10s,Unknown,Starting up database 'model'.
    01/24/2014 09:59:22,spid6s,Unknown,The resource database build version is 10.50.4000. This is an informational message only. No user action is required.
    01/24/2014 09:59:22,spid6s,Unknown,Starting up database 'mssqlsystemresource'.
    01/24/2014 09:59:22,spid6s,Unknown,SQL Trace ID 1 was started by login "sa".
    01/24/2014 09:59:21,spid6s,Unknown,FILESTREAM: effective level = 0<c/> configured level = 0<c/> file system access share name = 'ETL'.
    01/24/2014 09:59:21,spid6s,Unknown,SQL Server Audit has started the audits. This is an informational message. No user action is required.
    01/24/2014 09:59:21,spid6s,Unknown,SQL Server Audit is starting the audits. This is an informational message. No user action is required.
    01/24/2014 09:59:21,spid6s,Unknown,Resource governor reconfiguration succeeded.
    01/24/2014 09:59:21,spid6s,Unknown,CHECKDB for database 'master' finished without errors on 2014-01-19 12:20:10.410 (local time). This is an informational message only; no user action is required.
    01/24/2014 09:59:21,spid6s,Unknown,Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
    01/24/2014 09:59:21,spid6s,Unknown,1 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
    01/24/2014 09:59:20,spid6s,Unknown,Starting up database 'master'.
    01/24/2014 09:59:20,Server,Unknown,Node configuration: node 0: CPU mask: 0x000000000000ffff:0 Active CPU mask: 0x000000000000ffff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user
    action is required.
    01/24/2014 09:59:20,Server,Unknown,Lock partitioning is enabled.  This is an informational message only. No user action is required.
    01/24/2014 09:59:20,Server,Unknown,Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
    01/24/2014 09:59:20,Server,Unknown,Using locked pages for buffer pool.
    01/24/2014 09:59:19,Server,Unknown,Large Page Allocated: 32MB
    01/24/2014 09:59:19,Server,Unknown,Large Page Granularity: 2097152
    01/24/2014 09:59:19,Server,Unknown,Large Page Extensions enabled.
    01/24/2014 09:59:19,Server,Unknown,Detected 16 CPUs. This is an informational message; no user action is required.
    01/24/2014 09:59:19,Server,Unknown,SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
    01/24/2014 09:59:19,Server,Unknown,Registry startup parameters: <nl/>
    -d F:\SysDB\Program Files\Microsoft SQL Server\MSSQL10_50.ETL\MSSQL\DATA\master.mdf<nl/>
    -e F:\SysDB\Program Files\Microsoft SQL Server\MSSQL10_50.ETL\MSSQL\Log\ERRORLOG<nl/>
    -l F:\SysDB\Program Files\Microsoft SQL Server\MSSQL10_50.ETL\MSSQL\DATA\mastlog.ldf<nl/>
    -T 3226<nl/> -T 1118<nl/>
    -T 1117
    01/24/2014 09:59:19,Server,Unknown,This instance of SQL Server last reported using a process ID of 1060 at 1/24/2014 9:57:16 AM (local) 1/24/2014 3:57:16 PM (UTC). This is an informational message only; no user action is required.
    01/24/2014 09:59:19,Server,Unknown,Logging SQL Server messages in file 'F:\SysDB\Program Files\Microsoft SQL Server\MSSQL10_50.ETL\MSSQL\Log\ERRORLOG'.
    01/24/2014 09:59:19,Server,Unknown,Authentication mode is MIXED.
    01/24/2014 09:59:19,Server,Unknown,System Manufacturer: 'HP'<c/> System Model: 'ProLiant DL580 G5'.
    01/24/2014 09:59:19,Server,Unknown,Server process ID is 20096.
    01/24/2014 09:59:19,Server,Unknown,All rights reserved.
    01/24/2014 09:59:19,Server,Unknown,(c) Microsoft Corporation.
    01/24/2014 09:59:19,Server,Unknown,Microsoft SQL Server 2008 R2 (SP2) - 10.50.4000.0 (X64) <nl/>
    Jun 28 2012 08:36:30 <nl/> Copyright (c) Microsoft Corporation<nl/>
    Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)

  • How do I change language on HP4632? I went to preference but no option for English. Please help

    How do I change language to English on HP4632. Iwhen I go to the preference option it does not display English , only Latin and other languages . Please help

    Hi , Welcome to the HP Forums! I noticed that you are trying to change the language to English with your HP Officejet 4632. I am happy to help!  Have you tried scrolling up and down through the whole list of languages? Perhaps you don't see English because the language of the printer is set to some other language. Do you know what language the printer is showing? In the meantime, I have sent you a private message with the instructions on how to do a factory reset, please give that a try and let me know what happens! If you are unfamiliar with how the Forum's private message capability works, this post has instructions. You can also try using Google Translate, to try and understand the words on the screen. Hope this helps!  “Please click the Thumbs up icon below to thank me for responding.”

  • Unable to change language for SAP BW Report Iview

    Dear all
    We are currently rolling out BW Web Templates can be displayed in both EN and MS languages. The language can be changed via the URL that we display, e.g.
    For English Language:
    http://<hostname>:<port>/sap/bw/BEx?SAP-LANGUAGE=EN&cmd=ldoc&template_id=ZTEST
    For Malay Language :
    http://<hostname>:<port>/sap/bw/BEx?SAP-LANGUAGE=7&cmd=ldoc&template_id=ZTEST
    We have published these templates into Ent. Portal 6 using SAP BW Report Iview, but unfortunately we cannot view the report in the Malay language (SAP-LANGUAGE=7), even though we have inserted the command SAP-LANGUAGE=7 in the SAP BW Report Iview query string. All the reports, although defaulted to SAP-LANGUAGE=7 displays in English. We also tried to set the language settings for the Iview, but there are no language 7 or MS in the Iview. It can only be defaulted to the Portal’s language, which is English.
    Note that the reports can be viewed in the different languages if we using the URL separately outside of Portal, and also within BW Bex Analyzer itself. Only the Portal doesn’t allow us to view the reports in MS language.
    Can someone help us on this matter? All helps really appreciated. Thanks a lot.

    Hi Chris,
    That's a bit odd indeed. If I understand your question correctly, you do get the BW reports in the correct language (either English or Malay) using the url's in your post but not when using them within a standard BW report iView?
    The language setting for the iView has, unfortunately, nothing to do with the language for the content itself but can you tell me what the requested URL is for both Reports?
    The BW Report iView is based on the Application Integration Component that generates the URL based on the paramaters you provide in the BW report iView.The following template is being used: <iView[PORTAl_URL]>?System=<System[url_Encode]>&Report=<Report>&DynamicParameter=<DynamicParameter[url_Encode]>. I could be that the generation of the URL fails due to the 7 (don't know why, just a gut feeling because it's the only thing that's different between those urls). You could try to use create an iView based on the Application Integrator instead (some more control over the URL template) but first you need to check whether the URL generated by the iView is correct.
    Cheers!
    Frodo
    P.S: Award points if you find this useful

  • How to Change the default format for differnt language both in java and SQL

    Hello,
    I am using SQL Anywhere in my application.And in my java client application user can log in with their preferred language like English,French,German,Chinese,etc....When even the user log in to the application the data from the database will be displayed with respective to the language.But when i tried to see the dates in Interactive SQL all the dates r in the format of '2008-12-5 16:44:10:673' but say for example for Chinese it will be displayed as '08-12-5 16.44.10' and for some other language it will come in some other format(which is standard format for those language).
    Mean while i am using java client.When ever i am displaying a date it will be with respective to the language using Locale and date format classes.When i am displaying the date for Chinese in GUI it will show the date as '08-12-5 &#19979;&#21320;4:44'. In summary
    1. For Chinese,the default date pattern from SQL Anywhere date base is '08-12-5 16.44.10'
    2. For the same language date using java code is displaying as '08-12-5 &#19979;&#21320;4:44'. and i am getting the time format pattern as 'ah:mm'.I tried to change the display format in regional settings but no change in display.
    Is there any way to make both the time format as same?
    Please help me to solve this issue!!!
    Thanks in Advance!
    Arun

    pon_arun wrote:
    Hello masijade,
    I did as u said but still the date display is not the same......And I'm telling you that it doesn't matter. What "format" the DB likes to display a Date in when it displays it, is completely irrelevant to how you display it in your GUI.
    A Date does not have a format. A String representation of a Date does.
    As long as you use getDate from ResultSet and setDate from PreparedStatement you do not have to worry about this. Those methods will handle dates to and from the DB themselves. You can then use SimpleDateFormat to display the Date anyway you want to.
    Just because you show the Date one way, and the DB shows it another, does not mean that it is not the same date. Don't get hung up on how the String representation of the Date looks.
    Edit: If you simply want to be able to do "Human Comparisons" then look at the SQL TO_CHAR function (for Oracle, for other DBs the function name may vary). And for Java, read the API docs for SimpleDateFormat (as already intimated above).

  • HT1222 Everytime i try to open my itunes icon it says "This version of itunes has not been correctly localized for this language.  Please run the English version".  Then there is no option and i dont know to do this.  Please help.

    Everytime i try to open my itunes icon it says "This version of itunes has not been correctly localized for this language.  Please run the English version".  Then there is no option and i dont know to do this.  Please help.

    "This version of itunes has not been correctly localized for this language.  Please run the English version".
    Let's try a repair install of iTunes.
    Restart the PC first.
    If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
    If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
    Can you launch your iTunes now?

  • Howto limit options in search help for DDIC element LANGU (language)?

    Hi all,
    in my application I have an input field for a language parameter. Of course the standard search help (F4) opens a popup with all possible languages (registered in system). Now I want to limit these languages in the popup to only a few I want.
    Is it possible to programmatically do this in ABAP, or do I have to copy the DDIC element and create an EXIT for the search help?
    Thanks in advance for your help.
    Kind regards, Matthias

    Matthias F. Brandstetter,
    You can do search help in 2 ways.
    1.
    You can copy existing one and make changes to that and add that to the field for which u want to.
    2.
    check the search help which tables are being used.if you know the tables , u can write search help using ABAP.
    Check the procedure.
    1.F4 help for field on the screen.
       Event used.
      PROCESS ON VALUE-REQUEST.
      FIELD P0016-ZZ_CONTR_TYP module f4_for_contr_type..
    2.F4 help for field on selection-screen.
      Event used
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR FIELD p_contr_type.
      g_progname  = 'MP001600'.
      g_scr_num   = '2000'.
      call function 'F4IF_INT_TABLE_VALUE_REQUEST'
        exporting
          retfield        = 'ZHRPAE_CONTRTYP'  "--> Field on F4 popup window
          dynpprog        = g_progname
          dynpnr          = g_scr_num
          dynprofield     = 'P0016-ZZ_CONTR_TYP' "--> Field on the screen
          value_org       = 'S'
        tables
          value_tab       = i_zhrpat_contrtyp1 "-->Data that is displayed on F4 help
          return_tab      = i_ret_values           "-->This contains selected record 
                                                                   properties
        exceptions
          parameter_error = 1
          no_values_found = 2
          others          = 3.
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
          with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      else .
    " Read table i_ret_values with index 1.
        read table i_ret_values into w_ret_values index 1.
        p0016-zz_contr_typ = w_ret_values-fieldval.
    endif.
    I hope that it helps u .
    Regards,
    Venkat.O

  • My itunes changed language and shows squares. HELP PLEASE.

    One day I opened Itunes and there were a bunch of boxes where the nav. bar is and i can't read anything because it just changed language. I figured out which tab goes to Edit>Preferences or whatever it is, and I tried changing the language, and they all look exactly the same; nothing changes.
    I tried uninstalling and reinstalling. Didn't work.
    I tried again, this time, searching and deleting every bit of itunes/quicktime/apple software on my computer. Stil didn't work.
    Can someone help please?!

    Hello, Welcome to discussions.
    Based on what info you provided couple links below may help you out more. If by chance you are able to take a screen shot of what iTunes looks like it may better help the community offer further assistance.
    Quick Suggestions
    -Uninstall or Disable any software that may be used to modify windows themes and how it looks
    *More info on how to change Windows XP themes without other installed programs can be found via your search engine using keywords " change windows theme " " changes windows xp theme "
    -Download and update all Windows Updates and updates from your computer manufacture.
    http://windowsupdate.microsoft.com/
    iTunes: Pink iTunes window under iTunes XP/Vista
    http://support.apple.com/kb/TS2030
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926?viewlocale=en_US

Maybe you are looking for