Help for Creating PAL DVD

I have NTSC footage that I edited on Final Cut Pro HD and now I need to create a PAL DVD. I did it before using the same footage, same Final Cut program, but that was a few months ago and I forgot what format I chose on Compressor to export (if it was Compressor) The only options I see on Compressor for PAL are MP4-which I thought was for the web.
Thanks!

Hi,
For Windows 7:
   http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c01867124
For Windows 8:
  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c03481733
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Need help for creat apple id in iphone 5s

    need help for creat apple id in iphone 5s

    See this support document for instructions. http://support.apple.com/kb/HT2731

  • Issues with Motion in Using Compressor for a PAL DVD

    I am new to DVD Studio Pro and Compressor and am trying to create a DVD of a 50 minute PAL project that I made using FCP. I have found a couple tutorials on how to export my project using compressor to be compatible with DSP via pre sets (DVD: Best Quality 4:3) and actually manipulating the controls myself. I have found in using both techniques that during any scene with motion, the edges of the moving actor become blurred and grainy. The tutorials that I checked out I assume (since they were from the US) were for NTSC projects, is there any other considerations that I should make in compressing a PAL project, which might contribute to this graininess? Any ideas?
    Any help would be much appreciated. I have included my settings from Compressor below.
    Thanks.
    Name: MPEG-2 6.2Mbps 2-pass 4:3
    Description: Fits up to 90 minutes of video with Dolby Digital audio at 192 Kbps or 60 minutes with AIFF audio on a DVD-5
    File Extension: m2v
    Estimated file size: 273.48 MB
    Type: MPEG-2 video elementary stream
    Video Encoder
    Format: M2V
    Width: 720
    Height: 576
    Pixel aspect ratio: PAL CCIR 601
    Crop: None
    Frame rate: 25
    Frame Controls: Off
    Aspect ratio: 4:3
    Field dominance: Bottom first
    Average data rate: 6.2 (Mbps)
    2 Pass VBR enabled
    Maximum data rate: 7.7 (Mbps)
    High quality
    Best motion estimation
    Closed GOP Size: 12, Structure: IBBP
    DVD Studio Pro meta-data enabled

    The general concepts are the same in terms of maintaining quality throughout the work process in terms of Codecs, exports etc.
    As to the motion areas, compression markers in FCP can help in problem areas. What you should do is grab some of the problems sections and drop markers in there and encode them. Some of the frame controls can help, depending on source footage. What was the original material and cpautred/edited? Sometimes things in there can also give quality hits.
    Lastly some things (like real black outfits on light backgrounds) can cause some edging issues which can take some work to clean up as much as possible...

  • NTSC footage for a Pal DVD

    Hello everyone
    i have to make a DVD for Europe- PAL
    but the footage was shot on NTSC-DV
    If the settings of my DVD Studio Pro project -video standard is on PAL
    but the quicktime i import to my video track is NTSC
    will the client be able to play this dvd in europe?
    i would appreciate any help
    thanks
    Danny

    Hi::
    If the settings of my DVD Studio Pro project -video standard is on PAL
    but the quicktime i import to my video track is NTSC
    will the client be able to play this dvd in europe?
    You cannot import NTSC assets into a PAL DVDSP project. You must first re-encode your movie to the right standard.
    You can find some info about how to do so in this thread in Compressor forum:
    http://discussions.apple.com/thread.jspa?threadID=1015451&tstart=15
    Hope that helps !
      Alberto

  • HDV to NTCS DVD works... is it the same for a PAL DVD?

    Hello
    I created a DVD from HDV material using these settings with compressor:
    http://www.larryjordan.biz/articles/bkhdvconvert.html
    basicallythe options are: DVD Best Quality 90 min 16:9
    Video Format Tab in the Inspector to manually set filed dominance to "botom first"
    It worked fine.
    Now i need to create a PAL DVD. what would i need to change?
    just set the video format to PAL in the inspector window? and then in DVD studio pro set it to PAL again?
    thanks.
    Leon.
    thanks.

    let me see if I can help out a little here.
    The problem with converting 1080i to SD in software is that FCP seems to do a not-very-good job of downsampling the image, particularly when you are going directly to DV. Details get blurry, and other compression artifacts become quite noticeable. I have also experienced trouble with the HDV fields not getting processed correctly if I go to SD mpeg directly from an HDV timeline or movie file.
    Your best bet is one of the following workflows:
    Export a 1080i HDV or AIC movie file and re-import to FCP. Place this clip into an anamorphic SD sequence. It doesn't matter if the sequence is DV or Uncompressed if you send the sequence directly to Compressor from FCP, because this will ignore any rendered material and use an uncompressed image buffer as it encodes the mpeg. Do not letterbox your widescreen video if you are going to DVD - widescreen DVD video should always be full-frame anamorphic.
    Your other option is to attempt to use Compressor to down-res the sequence or a self-contained movie of your HDV, starting with one of the advnace format conversion presets in Compressor. However, you'll have to cutstomize the preset by turning on the frame controls, and testing the settings to make sure you are happy with the result. Turning on frame controls will increase the ratio of your encoding time anywhere from 4 to 20:1.
    I have tried all of these methods, and none of them look as good as capturing the downconverted video from the deck after mastering to HDV tape.
    Hope this helps -
    Max Average

  • Please Help for Create Animated_Gif

    Hello All i recently Create a Animated Gif file for a Site and for creating it i have use 4 JPEG image and add all by Photoshop>Animation with Frmae time 4sec. When i have save it and set Dither 100% and Optimize 100% but now image show scattered .when uploaded on website please look at http://www.printsasia.com/
    Please suggest how to get Good Quality in GIF image.my all JPEG image has Good Quality
    Please Check all JPEG images

    First thing is you are mistaking the quality of jpg vs gif. There is no way to get the same quality as a jpg, it just does not have enough colors. If you took a jpg image and converted to grayscale, then it would have the same number of colors even though they all would be shades of gray. Gray is color so...
    Jpg does not support transparency, layers or animations which is why it is not a good candidate for web animations. If you need full color, full transparency, and/or animations then you amy want to consider flash. Currently it is the only format for the web that supports all 3 and layers.
    That being said, png does have a sister format for animations but is not supported in all web browsers.
    Another alternative is quicktime, or windows media. Each can play in a web browser if the plugin is installed they both support full color and transparency (the latter supported under certain circumstances {correct codec}) But not all users have either or both video players installed, so most of the time it will work, but there is that chance.
    The lastest version of HTML is suppose to support the quicktime format but I don't know enough about how well it is supported via HTML and the number of Browsers. But it is an option that is worth keeping an eye on.
    So for a gif file...
    Keep in mind that the entire file that includes all frames must maintain a maximum of 256 colors with 1 of the colors reserved for transparency. Which is the reason for harsh borders on a transparent edge of the image. Not enough shades for transparency to have a smooth gradation.
    Even though your second image may work fine, odds are the first image will not and will look as you put "scattered". Simply because each of those books are made up of multiple shades of that color times the number of colors needed for all the books, background, text, etc. Even the reflection effect for the text is made up of multiple shades of that color. So in reality it just does not have enough colors in the table to make the image look smooth.
    I hope this helps some, I am sure it is not quite what you wanted to hear, but if you do a bit of research or throw your hands up and say good enough. You will at least know why and it wasn't you to blame, it is the outdated technology of the gif format.
    Good luck at which ever way you decide to travel...

  • Help for creating classification view in mm01

    hi guys can anybody help on creating classification views in mm01 using bdc recording i need a step by step procedure . since when i tryed in mm01 there are filds like class name i dont know where all these data's to find one more thing is i was asked to create classification view using bdc recording ...please help me with some programs if u have

    Hi,
    You need to use the BAPI 'BAPI_OBJCL_CREATE' to create characteristics for a material.
    The characteristics are need to be passed in the table ALLOCVALUESCHAR.
    If you do not know the values for a particular characteristics then you canmake use of FM
    BAPI_CLASS_GET_CHARACTERISTICS and BAPI_CHARACT_GETDETAIL to get the values.
    Regards,
    Ankur Parab

  • Problems creating PAL DVD containging clips with Encore CS5

    Hi,
    I was asked to create a menu for a DVD containing several movie clips which are mostly .FLVs and then some .AVIs. Though I'm complete new at all this DVD creating thing I got a nice working menu but when I built the DVD (which took about 45 mins) I got an error stating something about "no mpeg movie". The disk was burnt anayway (no way I could prevent that) but it doesn't work either on my pc or the DVD player.
    Do I have to convert the clips before importing them into Encore? and if so, which software can i use for that? I have only limited internet access at the moment so I cant research the whole WWW for a solution. Therefore sorry for bothering you with such newbie stuff
    anyway... thx for answers
    M.
    Oh, I'm using Productive Suite CS5 (english version on Win 7)

    Depending on what is inside that AVI (see below) you should have no problems with Encore transcoding the AVI into the MPEG2/VOB format used on a DVD
    I don't use FLV so have no idea if it will work with Encore (see further below)
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    CS5 Encore Files & Formats http://help.adobe.com/en_US/encore/cs/using/WS5C9E1CF8-B5BC-436f-89D3-61DDC02A2C47a.html
    Also... CS5 User Guides - online and PDF (see link in upper right corner at individual pages)
    http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html

  • What setting in Toast for creating a DVD-R master for replication?

    I just Downloaded the new Toast 7 Titanium.
    What setting should I use to burn a DVD-R to send in for replication?
    Someone else said DVD-ROM UDF
    There is also a "Make Video DVD from VIDEO_TS folder"
    Which one?

    Sorry peeps! haven't looked here for awhile... (been really really busy...)
    Don't use either of those options unless you know what you're doing and you know what dvdsp is doing!
    If the dvd-r is for replication then you should check region 7 to make the disc region all. It used to be checked by default but is not any longer...! Then when you format set the Output Device to Hard Drive and the Output Format to .img
    Now in Toast you select Copy>Image File. Burn two copies at as slow a speed as possible. It's worth knowing, some say that writing at rated speeds is best but from the many many times I've seen recordable media issues it seems that writing slower solves the problem more than the other way around!
    Doing that will mean that your disc remains Region All, unlike if you use a Build to the Hard Drive and burn with Toast. You can control the burn speed & you don't have to worry about removing the .LAY, .layout files etc.
    Some versions of Toast are helpful, version 6.0.7 or later has options which will remove any files that shouldn't be in the VIDEO_TS directory for you, makes sure an empty AUDIO_TS folder is included etc but that doesn't help you much if DVDSP doesn't let you control the region flags with Builds to the Hard Drive. Using an .img solves all that.
    If you use the Data>Advanced>DVD-ROM (UDF) option you should use DVDAfterEdit or MyDVDEdit to correct the regions settings. Then manually remove the .LAY, .layout, PAR folder etc that should not be in the VIDEO_TS folder.
    If you use the Video>Advanced>DVD-Video from VIDEO_TS folder you still need to correct the regions setting but Toast removes all the other 'stuff' for you and adds the (empty) AUDIO_TS folder.
    FWIW, when you Format & Burn direct to disc out of DVDSP it does as it's told. The .LAY, .layout etc files are removed (see the log) and the regions ALL setting is as you'd expect.
    More info:
    http://www.dvdafteredit.com/?q=node/100
    Apps:
    http://www.dvdafteredit.com/?q=node/81
    http://www.mydvdedit.com/
    -Jake

  • Need help for creating sharepoint sites for both internet and intranet users

    We would like to know what is the best approach to create SharePoint sites for our customers(internet users) and internal employees(intranet users) on the same SharePoint server. Here is the scenario:
    1) A customer posts a document from internet.
    2) This triggers a approval workflow that can only be accessed and executed in the intranet environment. This approval process requires approval's possible modifications to the customer's document.
    3) We would like the customer not to able to check the approval state and the modified document until the document is fully approved and finalized.
    We are pondering if we need to create two sites, one site for customer and the other site is for internal approvers. Or one site is possible. It also looks like we need to somehow copy customer's original document to intranet site and triggers the workflow.
    Any design ideas are helpful. Thank you advance!

    Hi Jason,
    Though it is perfectly possible to have both intranet and internet on the server, it is not a recommended practice. Having both on the same server would have multiple problems, instead me detailing it out, here is a forum thread on which Trevor had given
    enough reasons -
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9b550c33-6f5f-4cd9-8762-8ff389b747d9/sharepoint-2013-one-farm-to-host-intranet-extranet-internet?forum=sharepointadmin
    If you have valid reason to go with single server, then you can also explore email enabled lists as one option and another one would be using custom sharepoint designer workflow.
    you can also try using event receivers to send documents to intranet site from internet site, process everything and update the document in the internet site.
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if the reply helps you

  • Workflow for converting PAL DVD to NTSC

    Hi,
    I have read this thread
    "http://discussions.apple.com/message.jspa?messageID=7387015#7387015"
    but am a little unclear and would appreciate some help.
    I have shot 3 short movies in PAL anamorphic, edited in Final Cut Express HD 3.5, exported using the Quicktime Movie option, altered with QT Pro to put back to anamorphic, then added to an iDVD '08 widescreen project.
    Everything is fine, but I have realised that some of the recipients are in the Bahamas and require NTSC.
    The project is a paid commission so I want to ensure the conversion is as good as possible, without any re-digitising / editing.
    I duplicated my iDVD project and have used the project info pane to change to NTSC format. I deleted the encoded assets and this has set of iDVD to re-encode. Is a re-burn all that is required once encoding is done?
    It seems this is the easiest option, but are you suggesting the conversion can be better if i use the free JES deinterlacer product.
    To integrate this into my workflow I am assuming I could duplicate my asset folder (that contains the quicktime exports from Final Cut) and convert them using JES.
    Modification to these quicktimes (ie. a re-edit and export from Final Cut) would usually result in iDVD updating its content upon open.
    Am I on the right track?
    I have had a quick look at JES. I have added a file to convert and looked at the projects tab.
    Do I just have to choose "Standards conversion" & select "NTSC"? What should I set out of "Blend, Telecine or Minimal Blend" for best quality.
    I am using an Intel iMac with 2gb of memory.
    Thanks
    Eric

    Thanks for responding. I am currently trying a few options in JES but I was wondering if you have any idea of the best options to select.
    I have tried the Export radio button option to DV Stream and Quicktime, but the resulting output is quite a bit smaller than the Final Cut Express Movie File that is the source. I am concerned the quality is reducing.
    I am now using the Direct / DV-NTSC output option to see the file size of that.
    With regards to iDVD, that process took a hour or so for the automatic re-encode of the project assets and then a burn. It seems to play fine on my MacBook, and there appears to be no detectable degradation. The process seems fine. Has Apple caught up with JES Deinterlacer, or is the benefit not appreciable when not using HD footage or better?
    Thanks
    Eric

  • A little help for creating a procedure

    Hi,
    I'm new to oracle so i would really appreciate your help. Here is the scenario: i have several table in a database, in one table, let's call it table_a i have some values like: assignment, employee_id, account and so on. In another table, table_b i also have some data the is found in table_a like: employee_id, assignmnet, employee_name... and so on. I must create a procedure to check in table_a by value assignment(pk) and find what assignments are not in table_b and then insert these values in table_b, table_c.... . How do i create the comparison part?

    Hi,
    If It would have to insert only in table_b, then you can go for MERGE, that will be fine instead of procedure.
    Other options would be
    INSERT ALL
    INTO table_b VALUES (<required columns>)
    INTO table_c VALUES (<required columns>)
    SELECT <the columns>
    FROM table_a
    where assignmnet_id not in (select assignmnet From table_b);
    - Pavan Kumar N

  • Help for creating a GREP

    As part of my job i create newspapers, i receive articles with footnotes marked this way: Example(2,4,14) / Example2(5).
    I want to create a GREP that change the numbers and commas inside the brackets (only brackets with numbers) to small footnotes, and if possible, delete the brackets.
    From this Example(2,4) to this Example2,4.
    Here is what i come up with: \([/d,])*
    but it dosent work right, can you help please?
    Second, the articles are in hebrew and english, i want a way to change the font style only for english, how can i do it?
    Regards,
    Avi.

    For Example(2,4,14)
    try:
    Find what: \((\d+,\d+,?\d+)\)
    Change to: $1
    For Example (5)
    Find what: \((\d)\)
    Change to: $1

  • Lsmw help for creating PO

    hi all,
    We are using std batch input program to create PO for lsmw.
    however, field "tracking number" of Me21 transaction is not part of the std batch input program strucuture and on the screen its a required field.
    Please help me on how to include this during load.is there any other alternative?
    jigs

    Hi,
    For Windows 7:
       http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c01867124
    For Windows 8:
      http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&docname=c03481733
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Need help for creating class

    i m designing a class named Fan to represent a fan. the class contains:
    Three constants name slow, medium, and fast with values 1, 2 and 3 to denote the fan speed.
    an int data field named speed that specifies the speed of fan(default slow)
    an boolean data field named on that specifies whether the fan is on(default false)
    a double data field named radius that specifies the radius of the fan(default 5)
    a string data field named color that specifies the color of the fan(default blue)
    so here is what i want, a method named toString(that returns the fan speed, color and radius in one combined string.if the fan is not on. the method returns fa n color and radius along with string "fan is off" in one combined string.
    and a test program creates two fan objects assign maximum speed, radius 10, color yellow, and turn it on to the first object. assign medium speed, radius 5, color blue, and tun it off to the second object.
    after i created my two objects this is my output
    speed1 is slow, the fan is off, the radius is5.0Blue
    speed2 is slow, the fan is off, the radius is5.0Blue
    its not the result i want, i know there r somethin wrong with the if statement and the method..but i cannot fix it.
    Thank everyone who can give me some tips or help.
    here is my class
    * To change this template, choose Tools | Templates
    * and open the template in the editor.
    package javaapplication1;
    * @author Administrator
    public class Fan {
        private int speed;
        private boolean on;
        private double radius;
        private String color;
        Fan(int speen, boolean on, double raidus, String color)
            this.speed = 1;
            this.on = false;
            this.radius = 5.0;
            this.color = "Blue";
        public int getSpeed()
            return speed;
        public void setSpeed(int speed)
            this.speed = speed;
        public boolean isOn()
            return on;
        public void setIsOn(boolean on)
            this.on = on;
        public double getRadius()
            return radius;
        public void setRadius(double radius)
            this.radius = radius;
        public String getColor()
            return color;
        public void setColor(String color)
            this.color = color;
        public String fanSpeed()
            String output = "";
           if(speed == 1)
               return output = "slow";
           else if(speed == 2)
               return output = "Medium";
           else
               return output = "Fast";
        public String IsFanon()
            String output = "";
            if(on == false)
                return output = "the fan is off";
            else
                return output = "the fan is on";
    }Here is my main class
    * To change this template, choose Tools | Templates
    * and open the template in the editor.
    package javaapplication1;
    * @author Administrator
    import javax.swing.JOptionPane;
    public class testFan {
         * @param args the command line arguments
        public static void main(String[] args) {
            Fan fan1 = new Fan(3, true, 10.0, "yellow");
            Fan fan2 = new Fan(2, false, 5.0, "blue");
            System.out.println("speed1 is" + "  " +fan1.fanSpeed() + ",  " + fan1.IsFanon() + ", " + "the radius is" +fan1.getRadius() + fan1.getColor());
            System.out.println("speed2 is" + "  " + fan2.fanSpeed() + ",  " + fan2.IsFanon() + ", " + "the radius is" + fan2.getRadius() + fan2.getColor());
    }

    Peter__Lawrey wrote:
    I would not suggest using a variable like "onoff". What would true mean, is it on or off or onoff (alternating)? e.g. an on-off relationship is one which is not clearly on or off for long.
    You could just use an IDE to generate the constructor which would be simpler, however if there is no good reason to have two names for parameters and fields I would make them the same.I was wondering what a "speen" is.

Maybe you are looking for