Help for downgrade to 1.1.4 firmware

Days ago, I updated the sdk to beta 7 and reinstalled the new firmware. Now I want to downgrade the firmware to 1.1.4, but when I enter recovery mode under windows, the system does not recognize the iPhone ( there is yellow triangle on the device item "Apple Recovery (iBoot) USB Driver", and I can not go further. fortunately, the iTunes on mac can recognize it. Press the "Option" key and click "Restore" button to select 1.1.4 firmware, it extracts okay.... but after the "extracting" process, it shows a message
'The iPhone "iPhone" could not be restored. An unknown error occurred (20).' and stops going any further.
does any one have any idea on this problem?

I had the same problem with beta 7.
My notes on the restore process:
1) you must first put the phone in recovery mode:
Connect the phone to the Mac.
Hold power and home buttons until the screen
goes dark (takes 10-20 seconds). Release power, and keep holding home. It stays dark. Now iTunes should
pop up a window telling it is in recovery mode.
2) Use itunes to install 1.1.4 again. Notice if you press option on the mac keyboard, and click [restore] in itunes
you can select the recovery file from your hard drive. Otherwise itunes uses the latest, which may be beta 7!
3) the iphone will get the software. Takes some time (minutes) . You will see an error message when it is
completed.
4) your phone is still in a recovery mode, and 100% dead. We need to get it back to normal mode.
I have not seen any apple tool which can do
the task.
If Apple has a better way of solving this problem, I hopes they will give a comment.
If this description works, please leave a note. Maybe I was just lucky.....
<Edited by Moderator>

Similar Messages

Firmware downgrade helped - for what it's worth

For quite some time now I experienced problems with my WDS Airport network at my home office (Airport Extreme base and Airport Express remote - NAT provided by OS X Server 10.3). My MacBook Pro would have problems staying connected to my Airport network. Kept on disconnecting, or showed that it was connected, but couldn't see any of the Airport base stations. Very strange.
I also noticed that it must have had something to do with my neighbors' wireless networks around me. It seemed that whenever a neighbor's wireless network came online it bumped me off.
Anyway, after experimenting with WEP, WAP and WAP2 encryptions, as well as with Open network settings only with access control list I gave up. My MacBook Pro Core 2 Duo simply couldn't stay connected.
So I started digging around a bit and I found posts that described similar issues for others with other computer models like Power Book G4, iMac, etc. Now, my Power Book G4 never had any issues staying connected to my Airport network (used to anyway).
I read in one of the posts that it may have something to do with the Airport Extreme (V5.7) and Express (V6.3) Firmware updates. So I decided to take the plunge backwards and downgrade my Airport Extreme/Express Firmwares to V6.1.1 for Express and V5.5.1 for Extreme.
The downgrade went ok. Initially I had no connection (I guess because my last setting used WAP2 which is not available for the older Firmwares, so the config file was not the right format), but after resetting my Airport Base Stations to WAP I had connection.
At night I put all of the computers on the Airport Network to sleep. In the morning I woke my Mac Book Pro from sleep only to discover that no Airport Network was available.
So I logged in to the Airports from the server and pretty much tried everything. Set it to WEP 40, WEP 128, back to WAP encryption.. nothing worked (non of the computers on the Airport Network were able to connect anymore). So I finally gave up and had to settle for an open network without encryption, only access control list and closed network, and guess what. It worked. All computers can once again connect to the Airport network, and no matter what goes on with my neighbors and their networks I can stay connected. Putting the Mac Book Pro to sleep, waking up.. connected. No more disconnects now for the last 24 hours. I know it's too soon to tell.
But it seems that there may be some sort of problem with the latest Airport Firmware upgrades. Downgrading must have destroyed something though, because now none of the encryptions are working anymore.
If anyone has any idea on what I could do to solve this issue, that would be appreciated. Should I try to hard reset both base stations? Maybe that would do the trick?
Also, could it be that I may have copied old files with the migration assistant that belong to the PowerPC Airport drivers? Maybe that is messing things up. Anyway, have no clue.
All in all, I am happy with my Airport network, but not being able to have encryption worries me a bit. Also the speed leaves room for improvement. I have never seen my Airport network go faster than 12 Mb/s (of a theoretical 54Mb/s ... wow).
Anyway.. just thought I would throw this out there and see if someone has anything to contribute.
Mac Book Pro C2D 17" Mac OS X (10.4.8) iPhone needs a cam in the front

I feel your pain. Started logging on this morning with our computers (once we got power back on from a broken pipe) and man is it a mess. My wifes MacBook Pro wont remember our ABES network, nor will it show up. If we select other from the drop down airport icon and manually type in the name and password it is fine until we shut it down or restart it.
Unfortunately, my daughters newer iBook G4 cant even find our network, however, it will find other networks floating around the neigborhood. Go figure!
My sons snow G3 iMac this morning is having the same problem as my daughters laptop.
Our G4 iMac has no problem at all getting on the network and/or remembering it and automatically connecting to it when restarted/shutdown.
My Toshiba M35 laptop cant find the network but will find others and connect to them.
My 2 Dell Inspiron 5100 (one with an internal and another with a Belkin PCMCIA wireless) both connected to the base stattion with no problems.
Now, isnt that weird or what? We have soft reset the AEBS several times as well as hard reset with the same results as above. Anybody have any ideas?
Thanks,
Sean
P.S. This is after we have been running the current network/setup for about a year with no hiccups. Got to love apple and its firmware upgrades!

I need help with downgradeing my ios for my ipod touch 4th gen

i need help with downgradeing my ios for my ipod touch 4th gen

As has alwys been the case, you cannot go back.
Sorry

I've had my new iMac for about a week now and am totally sick of Mavericks, I would appreciate any help you guys could give me to help me 'downgrade' to Mountain Lion. Thanks.

I've had my new iMac for about a week now and am totally sick ofthe vagueries of Mavericks,
I would appreciate any help you guys could give me to help me 'downgrade' to Mountain Lion.
I understand that Mountain Lion has never been released on disc, so that would seem to be the major problem.
Thanks in advance
Roy136.

If the Mac came pre-installed with Mavericks you can't downgrade. Have a look at mine and den.thed's comments here:
https://discussions.apple.com/message/23946758#23946758

Difference between WinentupgradeforSA and Winentupgrade license do both these licenses help customer downgrade to Win7 enterprise .

Difference between WinentupgradeforSA and Winentupgrade license do both these licenses help customer downgrade to Win7 enterprise .

Hi,
Just to make a supplement, you can refer to the contents of the link below for the description about SA:
http://www.microsoft.com/licensing/software-assurance/
Roger Lu
TechNet Community Support

Help Me Downgrade iOS6 to 5.1.1

Well well well, After Hours and hours of trying to work my way through endless itunes errors iv finaly decided to ask for help.. Im sure someone out there can help me..
I got my partner an iphone 3GS a while back Came on vodaphone and she wanted it on three so i got lazy and took it to the shop for a quick easy network unlock. Got it back with cyidia etc so he had unlucked it through the jailbrake but she was happy with that, at the time ios 4.2 was the latest so thats what its been on ever since, no problems at all. Happy days,,, Well so I thought.
As of recent she did a reset and wiped her apps- Big mistake!! wish she had spoke to me before she had done it beacuse now all the apps require a newer iOS and i cant upgrade to iOS6 beacuse there aint a jailbrake or network unlock available ( as far as i know ) so this would mean she would be back on vodaphone and that isnt a good thing when you have a £25.00 per month sim only contract on three.
So whilst it was still on 4,2 I decided to use reds0w (latest version) and a guide online to helpme upgrade from 4.2 to 5,1,1, I folowed the guide word by word, downloaded the stock 5.1.1 ISPW then customised it on redsn0w and saved it, I then put the phone into pwned DFU mode and went over to iTunes and used the shift + click on restore found my custom NO_BB ISPW i had made and then this is where all the errors came pouring in. So i started working my way through them. Right now i had added to the host files. Used iREB-r5 to boot using there DFU as it supposed to stop errors etc etc but nothing still not allowing me to restore to my custom ISPW Iv been getting the 1600's errors so i downloaded a registry cleaner, Deactivated my AVG and firewall and its still coming up. so I had a little look round the net for downgrading rather than trying to trick iTunes to upgrade the device by making it believe it was restoring and i came across a few threads here and there and then decided to just dive in the deep end and see if i couldnt swim and i was clearly drowining the other way. The iOS upgrade went smoothly just had to remove one of the files i had added to the hosts to allow it to contact and verify via apple and I am now on iOS 6. My 4s is running it and am quite happy as im in no need to hack it as i have ipads for that
So my question is can one of you iPhone nuts help me get my Gals phone back working so i can have my 4s back. Ideally a step by step guide and a bit of support if things dont go to plan would be amazing.
Thanks for reading....

I don't know whose instructions you followed, but Apple does not
support downgrading to a previous version of iOS.
If you would state the problem(s) you are having with iOS 6, someone
will offer a solution.

TS3694 I have not updated my iphone in two years, and error -43 occured. i cannot find any help for this

I have not updated my iphone in two years, and error -43 occured. i cannot find any help for this on the apple site

If the phone has been hacked, we can not offer advice on Apple's support site.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Help. I have a SPA2100 with firmware 1.0.0(403b) Software V 3.2.2(g)

I have tried to upgrade using the 3.3.9.exe file.
It asks for the password, I have tried both just by clicking ENTER as well as "admin" it starts then says upgrade failure.
I have my SPA2100 from a VOIP service that has since gone out of bussiness, and have a new company. I need to change some things but cannot. I thought maybe the upgrade would help.
Any Ideas?

You have mentioned that when upgrading the firmware it asked for username and password. Before firmware upgrade kindly check if you can access the setup page properly. Make sure that you know the username and password for the device.
During firmware upgrade, the executable file should not ask for username and password, it asked for the ip address of the SPA-2100.
Download again the firmware which you can find in our website.

Creating search help for a field in AdHoc Query

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Need to restrict values in F4 help for Batch Characteristic

Hi,
I need to restrict values in F4 Help for a batch characteristic based on values entered for another characteristic. I could not find any BADI or Exit for this purpose. There is a BADI CACL_VALUE which is triggered after an entry is selected from dropdown list but nothing when we press F4. I thought of using Object Dependency but I need to write a programming logic for the requirement. Please let me know if there is any way to write program in Object Dependency or any other way for this requirement.
Regards,
Nikhil

Hi nikhil simha,
first of all, find out which search help is called.
[Hierarchy of the Search Help Call|http://help.sap.com/saphelp_nw70/helpdata/en/0b/32e9b798da11d295b800a0c929b3c3/frameset.htm]
may help you.
If you know the search help, you may enhance it, but first of all you should check the where-used-list and make sure that the search help shows the requested behavior only in the context where you want it to.
If it is your own program, you may be better off to create your own search help and define the triggering fields as search help interface input fields. Then you can use the values to filter results.
Regards
Clemens

Search Help for Vendor Feild not getting populated in the Screen Element

Hi Everyone,
In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
Now that the search help exists and I can drill down the values too but when i select/choose any value, that value is not getting populated in Screen feild.
is there any validation I need to do for this.
Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
Regards,
Raj

Dear Hema,
Could you please tell me how many internal tables you are using to store the data for display.
I observerd that you have lt_stock and lt_mat2 declared in the part of the program
>DATA: lv_stock TYPE lty_stock.
>DATA: ltmat2 TYPE TABLE OF lty_mat.
you have displayed above, however you are also using ls_stock and lv_stock .
>IF p_ztotal = ' '. "line
>WRITE 18 ls_stock-matnr.
>WRITE 38 lv_stock-strgr.
>
>ELSEIF ztotal = 'S'.                             "subtotal
    >WRITE: 15 ls_stock-nrmit.
    >WRITE 32 lv_stock-dispo.
    >WRITE 43 lv_stock-fevor.
>ELSE.                                            "total
    >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
>
>ENDIF.
Are those for displaying some other information?
Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
Best Regards,
Rajesh.
Please reward points if found helpful.

Search help for SKAT-SAKNR OR SKAT-SAKNR is not working

Hi All,
I have created a Search Help for F4 in a dialog program for SKAT-SAKNR OR SKAT-SAKNR. While i click F4 on that field, it displays blank values.
Here is the module:
module HELP_FOR_SAPGL_ACC input.
CLEAR t_SAPGL.
SELECT SAKNR TXT20
    FROM SKAT
    INTO CORRESPONDING FIELDS OF TABLE t_SAPGL UP TO 1000 ROWS
    WHERE SPRAS = SY-LANGU.
   WHERE L_GL_ACC = v_FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE         = ' '
      RETFIELD               = 'SAKNR'
    PVALKEY                = ' '
     DYNPPROG               = PROGNAME
     DYNPNR                 = DYNNUM
     DYNPROFIELD            = 'SKA1-SKANR'
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
     VALUE_ORG              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
    TABLES
      VALUE_TAB              = t_SAPGL
    FIELD_TAB              =
    RETURN_TAB             =
    DYNPFLD_MAPPING        =
EXCEPTIONS
    PARAMETER_ERROR        = 1
    NO_VALUES_FOUND        = 2
    OTHERS                 = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule.
In the above code I am selecting 1000 rows from SKAT table and in the Search Help Popup it is also displaying 1000 rows but all are blank.
Please help me.
Regards,
Avaneet

Hi check my weblog on search help exit codeing..
https://wiki.sdn.sap.com/wiki/x/du0
\* Prepare for output
CALL FUNCTION 'F4UT_RESULTS_MAP'
TABLES
shlp_tab = shlp_tab
record_tab = record_tab
source_tab = lt_result
CHANGING
shlp = shlp
callcontrol = callcontrol
EXCEPTIONS
illegal_structure = 1
OTHERS = 2.
IF rc = 0.
callcontrol-step = 'DISP'.
ELSE.

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

Search help for date field in Editable ALV

Hello Friends,
I am using editable alv using 'reuse_* '.
I have used date as input field. While creating fieldcatlog also i have declared dat as a mkpf-budat.
But i am not getting serach help for date in output.
Is it possible with reuse or i have to go by object oriented ?

Hi,
Just pass the Edit option of the fieldcatalog for those specific fields...
fcat-edit = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = sy-cprog
      i_callback_pf_status_set = 'PF_STATUS_SET'
      i_callback_user_command = 'USER_COMMAND'    "<---- pass this
      i_callback_top_of_page   = 'TOP'
      is_layout                = it_layout
      it_fieldcat              = it_fcat
      i_default                = 'X'
      i_save                   = 'A'
      it_events                = it_event
    TABLES
      t_outtab                 = it_final
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
*&      Form USER_COMMAND
*       text
*      -->R_UCOMM      text
*      -->RS_SELFIELD text
FORM user_command USING r_ucomm LIKE sy-ucomm
                        rs_selfield TYPE slis_selfield.
CASE r_ucomm.
    WHEN '&DATA_SAVE'.                "<-------check this
      PERFORM save_data.
ENDCASE.
ENDFORM.                    "USER_COMMAND

How to create a F4 help for a report selection screen field

hi,
can any one guide me to create F4 help for a field in a selection screen in a report program,plz give me a sample code

hi,
Here are the following ways
1.with the help of match code objects we can create the F4 Functionality for Field.
Syntax is :
PARAMETERS: p_org LIKE t527x-orgeh MATCHCODE OBJECT zorg.
2. One more thing is we can do it with Search Help's also.
3. Even we can do it HELP Views also.
Help Views:
You have to create a help view if a view with outer join is needed as selection method of a search help
The selection method of a search help is either a table or a view. If you have to select data from several tables for the search help, you should generally use a database view as selection method. However, a database view always implements an inner join. If you need a view with outer join for the data selection, you have to use a help view as selection method.
All the tables included in a help view must be linked with foreign keys. Only foreign keys that have certain attributes can be used here. The first table to be inserted in the help view is called the primary table of the help view. The tables added to this primary table with foreign keys are called secondary tables.
The functionality of a help view has changed significantly between Release 3.0 and Release 4.0. In Release 3.0, a help view was automatically displayed for the input help (F4 help) for all the fields that were checked against the primary table of the help view. This is no longer the case in Release 4.0.
As of Release 4.0, you must explicitly create a search help that must be linked with the fields for which it is offered (see Linking Search Helps with Screen Fields ).
Existing help views are automatically migrated to search helps when you upgrade to a release higher than 4.0.
A help view implements an outer join, i.e. all the contents of the primary table of the help view are always displayed. You therefore should not formulate a selection condition for fields in one of the secondary tables of the help view. If records of these secondary tables cannot be read as a result of this selection condition, the contents of the corresponding fields of the secondary table are displayed with initial value.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 15, 2008 3:15 PM

Help for downgrade to 1.1.4 firmware

Similar Messages

Maybe you are looking for