HELP for forgot passcode to lock screen in lost mode

Forgot lockscreen password and now I cannot get my phone off lost mode. If I try to reset through iTunes, iTunes will not let me because its stuck in lock mode. The phone never left my possession, just turned the lost app on by mistake.

See if the information in this support document helps you. iCloud: Use Lost Mode
Otherwise, you will have to restore the device as new to remove the passcode.

Similar Messages

  • I just recovered lost iphone but forgot passcode to lock screen how do i get in

    how do i unlock screen if i forgot pass code

    If you don't know the passcode, you cannot access the device.  Use this article: Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

  • TS1363 i need to sync my iphone as its damaged ( water submersion) i can't though as itunes is asking me for my passcode and my screen doesn't work, the phones on though still ringing etc ... Please help

    I need to sync my iphone as its damaged ( water submersion) i can't though as itunes is asking me for my passcode and my screen doesn't work, the phones on though still ringing etc ... Please help

    You need to do more research before you make purchases like this. You've wasted your money. The ONLY officially unlocked iPhone model sold in the US is the GSM model, and that model is only sold by Apple. That's the model iPhone you should have purchased.
    Did you read & understand my initial post? Especially this part:
    The unlocking of the GSM portion is just for International travel in order to use local sims. You still have to pay Sprint for the use of their international GSM partner’s network on a “pay as you go basis”.

  • I can't figure out how to resize my picture for my home or lock screens.

    I can't figure out how to resize my picture for my home or lock screens. It shouldn't be his difficult. Any suggestions? I'm running the latest software. Thanks.

    whichever app store you are connecting to, hyou need a credit card with an address in that country. Also, itunes gift cards must be in local currency too.
    If you are in japan, you need to use the japan app store

  • I have an iphone 5c, and for some reason the lock screen picture is blurred. how can i fix that?

    i have an iphone 5c, for some reason the lock screen picture is blurred. How can i fix that?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset   >  http://support.apple.com/kb/ht1430
    Restoring  >  http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first..
    More Info Here  >  http://support.apple.com/manuals/#iphone

  • How can I lock, put in lost mode or wipe memory on my stolen iPad if it is the only apple product I own?

    How can I lock, put in lost mode or wipe memory on my stolen iPad if it is the only apple product I own?

    I have already tried this and it doesn't work. It only says no devices. Suppose this means that whoever stole it have already wiped the memory so they can use or sell it. Although I would think the serial number should be connected to the hardware permanently somehow. Don't know how you do that on an iPad that requires a pass code to login to.

  • Itunes cannot connect to iphone because iphone is locked and in lost mode

    what should i do as the message on computer read as ''itunes cannot connect to iphone because iphone is locked and in lost mode''

    vineetvasudeva wrote:
    what should i do as the message on computer read as ''itunes cannot connect to iphone because iphone is locked and in lost mode''
    Then take it out of Lost Mode the same way you put it into Lost Mode:  via the Find My iPhone App or www.icloud.com.

  • Forgot passcode to unlock screen. how do i retrieve or reset?

    Help! forgot 4 digit passcode to unlock screen. How do I reset or retrieve? ipod no good if I can't open... Thanks in advance

    hold down the menu and the select button for like 8 secs and the apple logo will apper thats how you reset it and make it work again

  • Slide for Emergency - Stuck on Lock Screen

    Recently on my new iPhone 6,  I noticed that the battery percentage was not going down with the use of my device.  I held the lock button to power off, and I turned the phone back on.  When I saw the lock screen,  the time was not being displayed and the "Slide to Unlock" prompt was changed to the "Slide for Emergency" prompt.  After sliding to input my passcode before Touch ID could work, my passcode would not allow me to access my phone and instead, my phone vibrated once and sent me back to the slide to unlock screen.  These screens seem to be very glitchy, often times not responding to wake button presses or home button presses.  The screen will also often go black for no reason.  My device is running iOS 8.1.2 without any jailbreaks. I've already tried turning it off and back on, and holding the lock and home buttons at the same time.
    Any help would be appreciated

    Try the following testing after each step
    - Reset the device. Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • How to disable passcode on lock screen

    Hi
    I have just upgraded to iOS7 and by mistake enabled passcode on the lock screen. Can anybody tell how to disable this feature?
    Regards

    Basically when you turn the lockscreen notifications off - The icons still appear but no one can read the notifications on the lockscreen
    Regards Eree - Follow me on Twitter - Facebook - Google+
    For More visit My Blog

  • Option to disable the "slide to call" feature for missed calls from lock screen

    I realized that when the iphone (running iOS5) is locked, the“Slide to Call” allows anyone to make an outgoing call to the missed calls from a locked phone (with passcode). This may allow malicious and unwanted calls to be made from a locked phone by anyone having access to the phone and defeats the purpose of having the phone locked by a passcode.
    Don't get me wrong, it is nice feature for people who don't care about locking their phone, but I believe there should be an option to disable the “slide to call” or at least require password before allowing the outgoing call to go through. 
    At this point the only option that I see is to disable the phone related notifications from lock screen, which prevents all phone related notifications to be displayed on lock screen (missed or voicemail). This is not a desired solution.....
    This is the first time in the history of iOSes, that a user can make outgoing calls from a locked phone with a passcode. Even the voice commands (for dialling a number) have option to be disabled on locked screen.
    I was wondering if anybody else feels the same way about this? or have a solution?

    I share the same feeling with you about this issue.
    Actually I was very surprised when I discovered that!
    In addition to this, when you actually slide a missed call, it calls the person and when you end the call, the notification of the missed call is still present! So that person can be called again and again and again.
    This is a serious issue that Apple has overlooked!
    Please secure the iOS 5.
    Thanks.

  • Forgot my Ipad lock screen pass code

    I forgot my lock screen pass code and I can't get into my Ipad. I tried to restore my Ipad. It keeps asking me to turn off find my Iphone. I can't get into my Ipad to do that. Then I tried to get into my Iclouds account to erase my Ipad. But is not showing it says to add device. Please help.

    Hi spiggz,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    Cheers,
    - Judy

  • F4 help for Time field in Webdynpro Screen

    Hi Experts,
    I'm using TIMS data type for my Time field. In ECC we will have F4 function for the same data element, but in Webdynpro screen, am not getting the F4 help.
    I got some information from SCN that I need to go for some custom search help. But with which reference to the table, am I want to create it.
    Please let me know, is there any other possible way to create F4 for time field for webdynpro.
    Even I tried to use some standard search help, but am getting an error as 'Sending of dynpro ' ' not possible. No window system type specified'.
    Expecting valuable information from you experts.
    With Regards,
    RAM.

    Hi RAM,
    For time field, there is no SAP delivered search help in WDA , so we need to go for freely programmed search help.
    Please refer the below link, in which Mr. Thomas, has provided the links for search help document you can follow and create new search help component
    and also nugget of the component which can be imported using ZSAPLINK program.
    search help for time
    Regards,
    Rama

  • Search help for input fields in a screen

    Hi,
    Pls help me
    how to set search help property for the I/O fields in screen in se80?
    1. do we want to add any property for search help in the property window?
    2.do we want to create a MODULE PROCESS ON VALUE REQUEST ?
    PLS tell me how to set search for the I/O field in se80?pls tell me the process?
    i want to set the search help for more I/O fields in se80 but all the fields belongs to the same table?
    can i create a single search for all these fields and use that for all the I/O fields ?
    elementary search help or collective search help?
    thanks & regards in advance,
    vsnl.

    Hi,
    Input Help on the Screen
    Within the Screen Painter, you can define two types of input help:
    1. The FIELD statement with one of the additions VALUES or SELECT.
    2. Linking a search help directly to a screen field.
    If you link a search help directly to a screen field, it overrides the additions of the FIELD
    statement. However, the input check [Page 581] functions of the FIELD statement remain
    unaffected.
    Input Help in Flow Logic
    The following input help methods are obsolete and should not be used. They are still supported
    for compatibility reasons.
    In the screen flow logic, you can specify a value list for a screen field <f> as follows:
    FIELD <f> VALUES (<val1>, <val2>,...).
    The value list contains a series of single values <vali>. The NOT and BETWEEN additions for the
    input check [Page 581] are not appropriate for input help.
    You can also create a value list by accessing a database table as follows:
    FIELD <f> SELECT *
    FROM <dbtab>
    WHERE <k1> = <f1> AND <k2> = <f2> AND...
    In the WHERE condition, the fields of the primary key <ki> of the database table <dbtab> are
    checked against the screen fields <fi>. The WHENEVER addition, used with input checks [Page
    581], is not necessary for input help.
    If you have used a ABAP Dictionary reference for field <f>, the selection and the hit list formatting
    may be affected by any check table attached to the field.
    Attaching a Search Help
    Search helps from the ABAP Dictionary can be attached to a screen field [Ext.]. To do this, enter
    the name of the search help in the corresponding field in the attributes of the screen field in the
    Screen Painter. This assigns the first parameter of the search help to the screen field. It is only
    possible to place a value from the hit list onto the screen.
    Input help on a screen.
    REPORT DEMO_DYNPRO_F4_HELP_DYNPRO MESSAGE-ID AT.
    DATA: CARRIER(3) TYPE C,
    CONNECTION(4) TYPE C.
    CALL SCREEN 100.
    MODULE CANCEL INPUT.
    LEAVE PROGRAM.
    ENDMODULE.
    The next screen (statically defined) for screen 100 is itself. It has the following layout:
    602 April 2001
    Cancel
    Airline
    Flight number
    Screen field with search help
    Input help in the flow logic
    The input fields have been adopted from the program fields CARRIER and
    CONNECTION. The function code of the pushbutton is CANCEL, with function type
    E. The search help DEMO_F4_DE with the search help parameter CARRID is
    assigned to the screen field CARRIER. The search help uses the database table
    SCARR.
    The screen flow logic is as follows:
    PROCESS BEFORE OUTPUT.
    PROCESS AFTER INPUT.
    MODULE CANCEL AT EXIT-COMMAND.
    FIELD CARRIER VALUES ('AA', 'LH').
    FIELD CONNECTION SELECT *
    FROM SPFLI
    WHERE CARRID = CARRIER
    AND CONNID = CONNECTION.
    When the user chooses the input help for the individual fields, the following input
    help is displayed:
      For the Airline field, the search help displays the names of the airlines and places the airline
    code in the input field for the chosen line. If the airline code is not one of those listed in the
    VALUES list of the screen flow logic, the input check triggers an error message in the PAI
    event. So the search help overrides the VALUES addition for the input help, but not for the
    input checks. This is therefore not an appropriate place to use the VALUE addition.
      For the Flight number field, the flow logic displays the selected entries from the database
    table SPFLI and places the selected line in the input field.
    Regards,
    Bhaskar

  • Creating a search help for a field in selection screen

    Hi All,
    There are 3 fields in the selection screen. They are
        WERKS
        DATE
        MATNR
    Enter a value WERKS = 2465.
    When I press the drop down menu for MATNR, it should only give the material number available for 2465.
    I think, I should create a search help for it.
    Kindly help me to create a search help for the material number based on the above condition.
    Thanks in advance.

    Hi
    i am sending you a sample code where i had implemented a search help
    for my req you can understand very easyly and write for ur req
    <b>reward if usefull for ur req</b>
    TYPES : BEGIN OF ST_OBJID_SH,
             OTYPE TYPE HRP1000-OTYPE,
             OBJID TYPE HRP1000-OBJID,
            END OF ST_OBJID_SH.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
    IF S_OBJID IS NOT INITIAL.
        SELECT OTYPE OBJID FROM HRP1000
                     INTO TABLE IT_OBJID_SH
                     WHERE OTYPE = 'D'.
    IF SY-SUBRC EQ 0.
    SEARCH HELP FOR QUALIFICATION.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
                 DDIC_STRUCTURE         = ' '
            RETFIELD               =  'OBJID'
                 PVALKEY                = ' '
           DYNPPROG               = SY-REPID
           DYNPNR                 = SY-DYNNR
           DYNPROFIELD            = 'S_OBJID'
                 STEPL                  = 0
                 WINDOW_TITLE           =
                 VALUE                  = ' '
           VALUE_ORG              = 'S'
                 MULTIPLE_CHOICE        = ' '
                 DISPLAY                = ' '
                 CALLBACK_PROGRAM       = ' '
                 CALLBACK_FORM          = ' '
                 MARK_TAB               =
               IMPORTING
                 USER_RESET             =
          TABLES
            VALUE_TAB              =  IT_OBJID_SH
                 FIELD_TAB              =
                 RETURN_TAB             = RETURN_TAB
                 DYNPFLD_MAPPING        =
               EXCEPTIONS
                 PARAMETER_ERROR        = 1
                 NO_VALUES_FOUND        = 2
                 OTHERS                 = 3
        IF SY-SUBRC <> 0.
              MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                      WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
      ENDIF.

Maybe you are looking for

  • IDOC processing inbound in receiver system , transaction WE57

    Hello, possibly a simple question for those who are familar with IDOC processing. In transaction WE57 you can add function modules for processing IDOCs e.g.  inbound IDOCs. Now I see in our system that there are two function modules added to the same

  • Don't understand IMAQ image behavior

    Hi there,      I have several image controls in my application.  When I assign image A to image B (in my wiring diagram), and then close image B, image A is no longer valid!  When I try to crop image A after closing image B, I get a "not an image" er

  • How can i watch clips without flash player?

    How can i watch clips without flash player ? Since apple dont support this program, what shall i do?

  • Managing  SUS XML PO output

    Dear All, We are going to implement SRM 7.0 SUS . At the moment we are going to sent our PO XML from our ECC6 EHCP 4 system. Just want to know how do you all monitor and confirm that the XML output is sent out to the SRM system. I know it can be done

  • How to get FINDER on ipad?

    I need to use finder,. but can't get it on ipad?