Help for Install Win 10 TP from Iso DVD

Hi,
My computer run with WIN 7 Pro under C, I create a VHD under F, I download the ISO of WIN 10 TP, Burn a DVD, now I am ready to install WIN 10 TP, but how.... copy the files from DVD in my VHD in F and run the setup? or when I run the DVD the system ask me
where I like install WIN 10 TP, I am little bit afraid and I don't want overwrite anything in my C that after all working fine. While I like see and try how work WIN 10 TP.
Thanks for help
Cariboou!

Before Thanks
I follow step by step the instruction but I get this message
Recovery
you PC need to be repaired
The Operating system uses the Physical Address Extension feature to support system with more that 4mb of RAM. You'll need use a pc with a compatible processor to run the Operating System.
Error Code: 0xc0000260
You'll need recovery tools. If you don't have any installation media (like a disc or USB device) contact you PC administrator or PC device manufacturer.
Cariboou
It looks like your PC doesn't supports Windows 10 Technical Preview. Please check Windows 10 Technical Preview
System Requirements.
You need to install Windows 10 Technical Preview on a PC which should meet Win10 System Requirements.
If you cannot view system requirements from the above link, then see:-
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

I'm installing windows 8 64 from iso dvd-I did the partition wiht BCamp 5 and I did the usb with compatibility software-once installation start from dvd, it ask me for some disk, usb or dvd drivers to continue. How I can continue the instalation?

I'm installing windows 8 64 from iso dvd-I did the partition wiht BCamp 5.
I did the usb drive with the compatibility software-once installation start from the dvd, it ask me for some disk, usb or dvd drivers to continue.
How I can continue the instalation? How I can provide those driver to the instalation process?
Thanks
Manuel

You can't get there with GUID/GPT.
There are tips on making a USB flash device that is bootable.
You can set aside a small 6GB partition somewhere and put Windows 7 installer there and run it WHILE IN Windows.
Windows Vista can be upgraded in place to 7 RC.
You'll need NTFS (30-50GB).
Windows doesn't support FW for booting.
You can create a drive that has Master Boot Record.

NEED HELP! - Installing Camera raw presets from USB Stick

NEED HELP! -installing Camera raw presets from USB Stick.
I am attempting to install the Camera Raw Presets.
It says to put them into User Name/Library/Application Support/Adobe/CameraRaw/Settings...
When I get to CameraRaw the ONLY folders in there are CameraProfiles & Lens Profiles.
I have searched everywhere looking for a CameraRaw-Settings folder and cannot find one.
I have latest version of CameraRaw installed and still no settings folder.
I even attempted to find it by looking in camera raw where it has saved the custom settings I made as presets and it shows that they are saved but will not show me where.
I am using CS5 specifically Photoshop v12.0.4 and Bridge. I have Lightroom 4. I have iMac OS 10.7.3
Do I need to reinstall Camera Raw and how do you do that?
Will I then lose my presets that I made in CameraRaw?
Thanks for your help

Here is a note from the ACR 7.1 beta release. http://labs.adobe.com/technologies/cameraraw7-1/?tabID=details
Perhaps this answers question.
Frequently Asked Questions
Why is it no longer required to place the plug-in file in the specified directory on my hard drive?
The Camera Raw update process has grown to include lens profile and camera profile files which are easiest to install via a single installer process instead of updating several different directories manually.

Is there an instruction sheet detailing how to install Photoshop Elements 13 (from a DVD disk), on a Windows 8.1 computer, and if so, where do I find it

Is there an instruction sheet detailing how to install Photoshop Elements 13 (from a DVD disk), on a Windows 8.1 computer, and if so, where do I find it?

Googled for an instruction sheet. Got the following.
https://helpx.adobe.com/photoshop-elements/getting-started/install-pse.html
and
https;//helpx.adobe.com/photoshop-elements/kb/photoshop-elements-installation-errors.html
(Don't know why the second one didn't turn into a link, that's the url that printed out at the bottom of the page)
In any case it doesn't matter. I returned it to the store where I bought it.
Rule #1; Don't use a product if the people who produce that product (software, hardware, etc.) don't properly support it.
User forums and\or chat lines, are useful and may help. But! They do not constitute proper support (not for installation purposes anyway).

Problem installing OSX 10.4 from Firewire DVD drive

Hi, I'd be very grateful if anyone can help... I've been trying to install OSX 10.4 from DVD loaded in an external Firewire Lacie DVD drive and haven't been successful yet. I have tried instructing startup from the DVD in System Preferences, holding Option on startup and selecting the DVD and also holding 't' on startup, which I was informed forced startup from an external Firewire device (this resulted in a large Firewire logo floating round the screen but after 10 minutes or so hadn't progressed into full startup). Having read some bits of info found on Apple support I can see there is some issue about installing OSX 10.4 from a DVD drive other than an internal Apple drive (although I can't see any explanation why). Could someone please let me know if there is another way of doing this? – I mainly want to get 10.4 installed because I want to get a new ipod which requires 10.4 rather than 10.3. Thanks very much, Sam

Some external DVD drives support startup. Some do not.
Holding down the T key at startup makes the Mac go into FireWire Target Disk Mode. It will not help you start up from the DVD drive.
If you have another Mac with FireWire and a DVD drive, you can use FireWire Target Disk Mode to mount your Mac's hard drive on the other Mac's desktop. Then, you can use that other Mac to startup from the DVD and run the installer, pointing to your Mac's hard drive for the installation.
http://docs.info.apple.com/article.html?artnum=58583
I don't know of any other way, if the external DVD drive does not support start up.

I bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook and i installed it sucessfully but now i want to install win 8(64 bit) and i did but unfortunatley that dvd of bootcamp didnt work what should i do hlp?

i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook and i installed it sucessfully but now i want to install win 8(64 bit) and i did but unfortunatley that dvd of bootcamp didnt work what should i do to install my bootcamp and apple software in win 8
thanks in advance,,,

ahmad_uetlhr09 wrote:
i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook
Boot Camp does not come on DVD, what did you install.

Satellite Z930-14F - cannot install Win 8.1 from SCCM 2012 R2 environment

Dear all,
Sattelite Z series laptops cannot install OS (win 8.1) from our SCCM 2012 R2 environment.
Either no installation is starting, or pxe boot aborted error is showed.
The environment is used to successfully install OS (win 8.1) on different other vendor computers (dell) and virtual machines (hyper-v and vmware).
I've tried both UEFI and CMS boot options and tried to switch off the secure boot. Please advice.
Also, i've read about the "SCCM installation package for Toshiba". Will it help in my situation or is it just driver packages for SCCM?
Best Regards, Evgeny.

I guess you are speaking about this Toshiba package:
http://www.toshiba.eu/services/on-demand/business-computing/sdp120gs-v/
I dont have much experience using such SCCM drive package but it definitely compatible with the Toshiba business notebooks. The Satellite / Portege Z930 belong to the business range and I think the package should be compatible.
This package seems to be for all IT administrators who manage devices on the corporate network with SCCM 2012 R2. Toshiba offers with the new Toshiba SCCM package a solution to integrate other notebook into an existing IT infrastructure quickly and smoothly and all Toshiba Driver and application packages and a demonstration task sequence are integrated.
However, it seems that you could get more details about this package directly from Toshiba [email protected]
By the way: The Win 8.1 installation requires the UEFI mode (in case the UEFI BIOS is available). But booting from another, external source requires the disabled secure boot option.
So maybe you should use the UEFI mode but should disable the secure boot option in order to boot from LAN.

HELP for installing photoshop cc

When I use adobe creative cloud to install cc, it succeed. But there are 32 and 64 bits both installed in my computer. I certainly just need one to save my room. Help! BTW after installing does acc remain the files for installing and if where?

No there is no uninstall option available to remove the 32-bit version. You could try removing it manually but it would not be suggested and could lead to failures to update the application later on.
Also the download files are stored in your computers temporary directory. The installation files are then deleted after they are utilized.

By. i need help for photoshop connective...from 2 days ave a problem of connective.thank you

by i need help for my photoshop connective..if you ceck problem please.

Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

I have a charge on my itunes account that I did not authorize. Finding help for this type of problem from Apple or itunes is impossible. Who do I contact to get this charge taken off my account?

My checking account was debited by itunes for a subscription i did not order. How do I go about having it taken off? The entire Apple website and the itunes website is competely non-helpful for resolving problems. They should make their site equally as unfriendly when it comes to enticing you to buy their products.

You could simply type "Contact itunes support" into the google search bar. This would give you the link to contact itunes support.
Or you could just click the word Support at the top of this page, then click the link under Contact Apple Support.

Help to Install Tiger OS with external USB DVD-ROM

Hi! I would like to know if I can install Tiger with a External DVD on my G3 Ibook?. My internal CD crash, that's why I looking for an advice..
Regards.
Dave

I have a similar problem, but unfortunately, the FireWire port got thoroughly bashed before I got my hands on this machine. So while this model can, strictly speaking, run Tiger (or could if I upgraded the memory), I can't use Target Mode to do so, nor can I boot from the DVD, because this model, which was the first iBook to come with a FireWire port, only has a CD-ROM, not a DVD.
I understand that Apple used to give people the option to send in their Tiger DVD and get a set of CDs, but I can't find any trace of that on the Apple site now. I've seen Tiger on CD for sale, but it cost $179, even before shipping, and the whole point of the exercise is to avoid spending any more money than absolutely necessary (at least during this fiscal year) to upgrade to Tiger. (I've had a whole bunch o' startup costs, and don't need any more right now.)
Grga

Help for converting .mov HD 1080i to HD DVD 1080i format to play on my DVD player

HI,
I have downloaded HD 1080i movie clip from iTunes .
The Video Clip is a .mov file. I can play this file on my iMac , but i need to play this file on my DVD player.
My DVD PLAYER do not support the .mov file . I need some help to convert the .mov file to a DVD format.
I have tried some free application that converts any format of video to required format. But the converted DVD format is down graded to 480p.
I need the same 1080i format DVD format when it is converted.
Please suggest the Application which can convert the .mov file to DVD in 1080i
Thanks in advance
Regards,
Nilesh Labde
<Personal Information Edited by Host>

DVD Video discs are always standard definition -- 720x480 on NTSC or 720x576 on PAL, otherwise they don't conform to the strict DVD Video specification and won't play in a DVD player.
If you want HD, you have to make a Blu-Ray disc. You need specialized software for that such as Toast 11 Titanium or Adobe Encore (part of the CS5 or CS6 collection, not sold separately) and a Blu-Ray burner. Of course, you will also need a Blu-Ray player connected to your HD TV.

I need help for install and configure password sync from AD to OID

Hi guys!
I need to sync passwords from AD to OID, first all, ¿What software do I need? I read some docs and don't find the good config.
I'm trying with:
-Database 11g
-Weblogic 11g
-SOA 11g
-IDM 11g
-IAM 11g
First I install the Database and load the schemas with RCU, next install Weblogic without domian, next install SOA, next install IDM (OID and DIP) in a new Weblogic Domain, next install IAM, next configure IAM in the domain created before, next configure SSL, check the config by using ldapbind, next configure DIP.
It's that ok?
¿What I am doing wrong?
Thank you all.

If all you need is AD & OID then OIM is not required. DIP alone can handle this
Password sync should work using DIP. if this is not working then check synchronization mapping and verify that password attribute is also part of this AD-OID sync. Enable debug in synchronization profile or raise an Service Request with Oracle support.
Check
http://docs.oracle.com/cd/E23943_01/oid.1111/e10031/odip_actdir.htm#CHDIGDEH
and
http://docs.oracle.com/cd/E23943_01/oid.1111/e10031/odip_config_integration.htm#BABBFAAJ
and
http://docs.oracle.com/cd/E23943_01/oid.1111/e10031/odip_adpasswordsync.htm#CHDBIIJC
Atul Kumar

Best practices for installing Win 10 under Hyper-V on Server 2012R2 host

Yeah, yeah, I know I could probably get my answers after spending 10 hours reading hundreds of isolated threads here. I've already put in about 2 hours, and I'm exhausted. Plus, this site does not have a very sophisticated search function.
I want to install Win10 as a VM on my Server 2012R2 machine. I am not currently hosting any other VMs, so my first decision was whether to try it using Hyper-V or VirtualBox. I started with VirtualBox, but I ran into two problems: networking
and video. Also, VirtualBox itself seems to have some issues with failing to install the extension pack. So now I think I'll give Hyper-V a shot.
I found some blog posts from last year providing guidance on setting up Hyper-V for Win10, but given the rate of change of this beta OS, I expect there are many new "features" that can be mitigated against by specific settings on the VM.
Some specific questions:
1. Generation 1 or Generation 2 in the Hyper-V setup? The blogs I've seen say to use Gen1, but provide no justification. Perhaps because they are using Win8 as the host? I am using 2012R2.
2. Does the Win10 ISO file need to be continually available to the VM, or is it only used in the initial installation?
3. How do I get the VM to access the GPU card, which has lots of memory, over the useless onboard video chip which only has 8MB and no 3D instruction set? This was a dealbreaker with VirtualBox.
4. I anticipate many issues with networking, but I'll start with this: I have dual onboard NICs going into a managed switch. Should I just give one physical NIC to the VM and let the host have the other? I think I'm going to have some issues
with DHCP IP address assignment, but we'll see. Any best practices here would be helpful.
Thanks.

>1.
I'd use Gen 1, that is a BIOS type boot, but that's just because I've had
less trouble than with Gen2 VM's.
>2.
Only during install, refresh, reset, or sfc.
>3.
No virtualization solution does it easily, but there is RemoteFX if you can
get a Windows 10 client to use it. I've never tried.
http://social.technet.microsoft.com/wiki/contents/articles/16652.remotefx-vgpu-setup-and-configuration-guide-for-windows-server-2012.aspx
>4.
That's what I would do (assigning one NIC to the VM, and one the host). If
both are receiving an IP address right now from DHCP, they will continue to
do so the new way unless you have a managed switch that would prevent more
IP addresses. It's hard to tell...
Bob Comer

Help for installing Flashplayer 10.3 on a Mac?

I have tried unsuccessfully to install flashplayer 10.3 on my MacBook using OS10.5.6. I get an Installation Successful message, follow the instructions to close my browser, but it is not there. I have used both Safari and Firefox to try and install it. All of a sudden a new version of flashplayer is needed for doing things I have done for years such as watching TV shows and using a brain training program. Do I have to upgrade my Mac from Leopard to Snow Leopard, or will that do it? Anyone else have this problem? Any ideas? This is the first time I have had problems installing any program Leopard will suport. Thanks!

You can check if the plugin is installed on safari by following these instructions - http://browsers.about.com/od/safar1/ht/safariplugin.htm
Under Shockwave Flash, you should see something like Shockwave Flash 10.3.r183 — from file “Flash Player.plugin”. Do you see it?
Also, please make sure plugins are enabled - http://247support.custhelp.com/app/answers/detail/a_id/8968/~/safari%3A-enable-plug-ins.
Finally, if those solutions don't work, try a clean install.
1. Follow the CLEAN uninstall instructions here. Make sure to delete all the files/folders in step 4. http://forums.adobe.com/message/4041846#4041846
2. Download this zip of the latest Flash Player for your machine. I have one for you here, pulled from our flash player archive page. http://download.macromedia.com/pub/flashplayer/installers/archive/fp_10.3.183.90_archive.z ip
3. Extract, and navigate into the 10_3_r183_90 folder (not debug).
4. Mount flashplayer_10_3r183_90_mac_intel.dmg, and continue with the install.
Hope this helps.

Help for Install Win 10 TP from Iso DVD

Similar Messages

Maybe you are looking for