Help for installing Flashplayer 10.3 on a Mac?

I have tried unsuccessfully to install flashplayer 10.3 on my MacBook using OS10.5.6. I get an Installation Successful message, follow the instructions to close my browser, but it is not there. I have used both Safari and Firefox to try and install it. All of a sudden a new version of flashplayer is needed for doing things I have done for years such as watching TV shows and using a brain training program. Do I have to upgrade my Mac from Leopard to Snow Leopard, or will that do it? Anyone else have this problem? Any ideas? This is the first time I have had problems installing any program Leopard will suport. Thanks!

You can check if the plugin is installed on safari by following these instructions - http://browsers.about.com/od/safar1/ht/safariplugin.htm
Under Shockwave Flash, you should see something like Shockwave Flash 10.3.r183 — from file “Flash Player.plugin”. Do you see it?
Also, please make sure plugins are enabled - http://247support.custhelp.com/app/answers/detail/a_id/8968/~/safari%3A-enable-plug-ins.
Finally, if those solutions don't work, try a clean install.
1. Follow the CLEAN uninstall instructions here. Make sure to delete all the files/folders in step 4. http://forums.adobe.com/message/4041846#4041846
2. Download this zip of the latest Flash Player for your machine. I have one for you here, pulled from our flash player archive page. http://download.macromedia.com/pub/flashplayer/installers/archive/fp_10.3.183.90_archive.z ip
3. Extract, and navigate into the 10_3_r183_90 folder (not debug).
4. Mount flashplayer_10_3r183_90_mac_intel.dmg, and continue with the install.
Hope this helps.

Similar Messages

Can someone help with installing flashplayer vs 11 on a Mac

The OS is 10.7.5 . I currently have 10.3.183.5 installed but when trying to upgrade I get an error meessage which states Actionlist not found. i am using Firefox vs 3.6.20

Try using the offline installer http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg

Help for install the mac Os x 10.4.11

Halo everyone!!
I Have a Mac Mini (PowerPc G4) , but he don´t Install the Mac Os x 10.3.1 , and my drive disk presents problem for read the disc , have as , install the Mac Os X for USB Drive ? and there how download the Mac Os X for apple suport ?
why my current Mac Os X this corrupted he is (Mac OS X 10.5.8) but Because problems i prefer the Mac os X Tiger
I thank the help

Is the 10.3.1 Disc the original one for this Mini series, or for another Mac?
You can't download 10.4, & it can be expensive...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
Do you have the 10.5 Install Disc?

HELP for installing photoshop cc

When I use adobe creative cloud to install cc, it succeed. But there are 32 and 64 bits both installed in my computer. I certainly just need one to save my room. Help! BTW after installing does acc remain the files for installing and if where?

No there is no uninstall option available to remove the 32-bit version. You could try removing it manually but it would not be suggested and could lead to failures to update the application later on.
Also the download files are stored in your computers temporary directory. The installation files are then deleted after they are utilized.

Will apple help me install microsoft as i have a mac air with no disc drive?

will apple help me install microsoft office as i dont have a disc drive on my mac air?

I believe you can also download Microsoft Office 2011 from the Microsoft website using the same product key from the box.

Help with installing flashplayer for mac 10.4.11

says flashplayer isnt available for power PC, dont know what to do!?

Hi azzakirk,
see http://forums.adobe.com/thread/895134?tstart=0
Hope that helps.

Help with installing Flashplayer with Ffox 2 & Mandrake 10.0

I am trying to get my Linux (MythTV) box (running Mandrake V10.0) to view the following site: http://www.abc.net.au/iview/
It requires Adobe Flashplayer V10, and the ability to run Java scripts.
I have installed Firefox V2.0.0.20 (since V3 will not install due to needed libraries etc.) in /usr/lib/firefox.
I cannot seem to successfully install the Flashplayer V10 plugin, despite the .so being present in /usr/lib/firefox/plugins.
Please, could someone help me with this?
Regards,
Il-uvatar
(WARNING - Linux newbie at the controls)

Ohluckyme:
I suspect that by a PowerPC G4 450 MHz you mean a PowerMac G4 450 MHz. This would be either the AGP Graphics or Gigabit Ethernet. Whichever it is, it will support OS 9 up to Tiger (10.4.11), but it does not meet the technical specifications for Leopard. However, both these have very small Hard Disk Drives on the low end, so if you have the 10 GB HDD, I would recommend replacing it before installing OS X, which needs a minimus of 5 GB free space on HDDs 40 GB or less, and 15% on HDDs larger than 40 GB.
I suggest that you consider either Panther (10.3.9) or Tiger (10.4.11) along with OS 9. I further suggest that you backup your data, then completely reformat and erase the HDD before installation. (Post back for step by step directions for reformat and installation). You will need the Full Retail Version of either Panther or Tiger.
Please do post back with further questions or comments.
Cheers
cornelius

Help Me Install Flashplayer Update Please

Hi,
I'm hoping someone can help me. I am trying to download Adobe Flash Player 14 version onto my Windows 7 Laptop. I had Version 13. I have clicked to download it and have run and saved and run. I have also clicked to allow my computer to run it but all I seem to get each time is a grey box titled Adobe Flash Player Installer. There is no words or progress bar inside the box it is empty. I know from downloading Flash player before that this should not be the case. I cannot find the problem and don't understand the it's not allowing me to download. I need help. Why is this not working. Thank you.

Hi Lulu44,
We're sorry you've encountered problems installing Flash Player. Unfortunately, we've not been able to reproduce the issue reported and we're looking for a few volunteers to help us generate debug logs.
If you'd simply like to get Flash Player installed, please try downloading and installing our offline installers located here:
Flash Player ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
We suspect this will resolve the majority of the problems being encountered.
If you're up for helping us resolve this, and don't mind running commands, from the Command Prompt, please message me directly.
Thank you.
Maria

Help for Installing ECC 6.0

Hi,
I am trying to install ECC 6.0 since last week and so far I am not successful. But all these time i made few observations which I have listed below. I had gone through installation guides and enough materials. Anyone who is having installation experience of ECC 6.0 in Windows server 2003 with MS SQL 2005 as database please help me out with some valuable suggestions.
Installation Scenario:
1.     Installation is done on the same host were solution manager is nstalled.
2.     Installation is performed as central system Installation.
3.     All the prerequisites were met as mentioned in the installation guide. ( If any specific point should be given much care please let me know )
4.     Both ABAP Installation and ABAP+JAVA stack has been performed.
Observations Made:
1.     Installation fails during importing ABAP (Job 1 of 19)
2.     Size of the installation directory grows abnormally (nearly 36GB)
3.     After observing *.TSK file its found that errors were caused only with steps starting with letter D (ex: D F4UHLP I err)
4.     Even after changing the message from err to ok the installation is not proceeding and it throws error.
I am starting a fresh installation now and Please let me know how I should precede the installation. Will there be any errors with dump (I have downloaded everything through SAP Download Manager). How can I finish it successfully.
Regards,
Anandha Krishnan.R

Hi Anandha,
It seems to be a memory issue. You need to increase your physical memory as well virtual memory/swap space.
Increase in virtual memory will mean reduction in free hard disk space so you need to have enough amount of hard disk space available.
Go for the increase and the installation should work out.
Regards.
Ruchit.

Need help for installing OS after installing new hard drive

I have an imac 27 2010.
The hard drive has failed for the 2nd time. I have installed a new hard drive again. When trying to install the OS, it looks to begin but then tells me it can not be completed.
I had gone the the erase, then partition steps previously.
Any advice?
I do have a time machine copy to restore from if I can get that far as well as the discs handy to use.
Any help would be greatly appreciated.

Which OS version install disk do you have? It's not Mavericks since that does not come with a disk.
And you are trying to install Mavericks? If so, are you using the Internet Recovery Option (press Command + Option + R while restarting/rebooting)? I recently read of a case where the user was unable to reinstall the old OS (in that case Snow leopard) and he could not install Mavericks either. He took it to an Apple store and they bypassed the ID/password requirements and reinstalled it for him.

Need Help for Installing TK ACTIONS PANEL for PHOTOSHOP CC

I recently just subscribed to Photoshop CC. And the first thing I try to do is to install the TK ACTIONS PANEL into photoshop. I did what I used to do with CS5 to install the TK ACTIONS PANEL. I follow the instruction the same way, but I couldn't get the panel install. Instead I got a message " Load panel xml error Error #2032 ". Please HELP!!!

Panel extensions were are developed using Adobe configurator and there were several versions and there needs to be a different install developed for each panel extension for each version of Photoshop there seems to be no compatibility between Photoshop versions each gets it own copy of everything. I developed a panel for one of my packages but don't use it or distribute it. Instead I just link Photoshop Scripts path to my scripts path and use a single copy of my scripts for all versions of Photoshop, I address Photoshop incompatible change in my scripts maintain a single script by adding code to test for Photoshop version in functions that need to be coded for various versions of Photoshop,

Ask help for install solaris 7

When I Install solaris 7 in my server sun140(ultra 1), This
Message display on my screen:
---------------------------------------hereinafter----------------------------------
ok boot
Boot device:net File and args:
Timeout waiting for ARP/RARP packet
Automatic network cable selection successed:Using TP Ethernet Interface
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
----------------------------------------hereinbefor-------------------------------
What's wrong? What shalld I do.
Thanks
**** merry christmas and Happy New Year***

Hi,
At the ok prompt, type 'printenv' make sure the last variable 'diag-switch' is set to false. If its true, set it by using setenv diag-switch? false
also, what is your boot-device set to? is it disk, can you see your disk?
try 'probe-scsi' to make sure you have a disk to boot off. It may be your disk is not bootable, therefore its trying to boot off the network
Hope this helps.
M

I need help with installing flashplayer

when i download the flashplayer installer, i get a box that says " The program can't start because MSVCR110.dll is missing from your computer. Try reinstalling the program to fix this problem."
I have of course done some searching on google first, but found nothing related to adobe flash player.
Any help would be most appreciated.

I have this same issue, I have re-installed the latest version of C++ and also checked my system32 folder. MSVCR110.dll is in there as it should be. i have installed flash before. its just this latest update is giving me the MSVCR110.dl is missing error. Any ideas why? Im using windows 7 ultimate 64 bit

Help for install NW04s SR2 + win2003 server 64bit

I use following S/W and H/W condition to install a NW04s SR2 (ABAP + Java) central system.
S/W: Win 2003 standard x64 edition, SP2. SQL 2005,
H/W: CPU:Intel Xeon*1, RAM: 4GB, virtual memory: 20GB.
JDK: 1.4.2.14, 64-bit version.
But, install procedure fail on 'Start java engine', error message is
ERROR 2007-06-23 19:01:43
CJS-30150 Java processes of instance PD1/DVEBMGS03 [ABAP: ACTIVE, Java: UNKNOWN] did not reach state PARTRUNNING after 20:30 minutes. Giving up.
ERROR 2007-06-23 19:01:43
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|4|0|startJava was executed with status ERROR .
I found no process exist on 'J2EE Process Table' tab in the sapmmc, but ABAP instance running perfectly.
Therefore, I follow notes 723909 to modify server's JVM parameter through J2EE configtool.
-Xmx2048m
-Xms2048m
-XX:NewSize=320m
-XX:MaxNewSize=320m
-XX:MaxPermSize=256m
-XX:PermSize=256m
Any suggestion would very appreciate.

I use Oracle DB, but I have the same problem.
The Server do not start.
I can see this error in file dev_bootstrap:
[Thr 2420] JLaunchIStartFunc: Thread 2420 started as Java VM thread.
[Thr 2420] *** ERROR => DlLoadLib: LoadLibrary(jvm.dll) Error 193 [dlnt.c       237]
[Thr 2420] *** ERROR => Can't load VM shared library (jvm.dll) (rc=-2) [jhvmxx.c     1576]
[Thr 2420] **********************************************************************
ERROR => Cannot load the Java VM shared library.
Please see SAP Note 943602 , section 'Java VM shared library issues'
for additional information and trouble shooting.
[Thr 2420] *** ERROR => Cannot load DLL for Java VM [jlnchxxi.c   717]
[Thr 4944] Fri Feb 08 07:52:12 2008
[Thr 4944] JLaunchCloseProgram: good bye (exitcode = -2)
Note 943602 or 940893 do not help me.
Any suggestion?
thanks.
Giorgio Peressin

Help for Install Win 10 TP from Iso DVD

Hi,
My computer run with WIN 7 Pro under C, I create a VHD under F, I download the ISO of WIN 10 TP, Burn a DVD, now I am ready to install WIN 10 TP, but how.... copy the files from DVD in my VHD in F and run the setup? or when I run the DVD the system ask me
where I like install WIN 10 TP, I am little bit afraid and I don't want overwrite anything in my C that after all working fine. While I like see and try how work WIN 10 TP.
Thanks for help
Cariboou!

Before Thanks
I follow step by step the instruction but I get this message
Recovery
you PC need to be repaired
The Operating system uses the Physical Address Extension feature to support system with more that 4mb of RAM. You'll need use a pc with a compatible processor to run the Operating System.
Error Code: 0xc0000260
You'll need recovery tools. If you don't have any installation media (like a disc or USB device) contact you PC administrator or PC device manufacturer.
Cariboou
It looks like your PC doesn't supports Windows 10 Technical Preview. Please check Windows 10 Technical Preview
System Requirements.
You need to install Windows 10 Technical Preview on a PC which should meet Win10 System Requirements.
If you cannot view system requirements from the above link, then see:-
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Help for installing Flashplayer 10.3 on a Mac?

Similar Messages

Maybe you are looking for