Help for J3D display in JSplitPane!!!
I create a JSplitPane component to load a J3D canvas in it's right side and
another panel in it's left .
At first, It feels good.
But after the windows of J3D canvas collapsed and expand it again,the
problem appeard, and reports:
Fail to Reset() D3D device, try Recreate device again. - D3DERR_DRIVERINTERNALERROR
I view the bug-report of this error,and no use.
Here is the code:
http://zhdodo.8866.org/default/splitPaneTest1.java
http://zhdodo.8866.org/default/actionTest1.java
Did you ever find a workaround for this problem? I've been having lots of problems with java3d-1_3_2-beta3 using the openGL driver, with the program frequently not redisplaying panes containing Java3D content (although it's better than beta2). Eventually, as a last resort, I tried the DirectX implementation. This seemed to fix the redisplay problem until I collapsed and then expanded a pane within the splitter and ran into the problem you described. Java3D is turning into a bit of a minefield :-(
Similar Messages
-
HI experts,
I have a requiment to display in ALV out put, for the TEXT COLUMM i need to display in single cell not in multiple cells.
please find below sceens for ref. so please help me how to proceeed its very urjent..
As is
To BEHi Raghu,
Please use word wrap functionality.
Refer to the link below for more information:
Word Wrap Functionality in ALV
Regards,
Ashvin -
Hi good souls,
I have 8 check boxes and when i want to insert the record in my table and check any of checkboxes the required field gets updated. but the problem is coming when i want to display the values.
the check boxes are not marked when i display the result. please help me by code and by your ideas on how to display the check mark when i press display.
data: mac1 type c,
mac2 type c,
mac3 type c,
mac4 type c,
mac5 type c,
mac6 type c,
mac7 type c.
WHEN 'INSERT'.
if mac1 = 'X'.
zaa_st-mc1 = 'CORRUGATOR'.
endif.
if mac2 = 'X'.
zaa_st-mc2 = 'INLINE'.
endif.
if mac3 = 'X'.
zaa_st-mc3 = 'LANGSTON'.
endif.
if mac4 = 'X'.
zaa_st-mc4 = 'DRO'.
endif.
if mac5 = 'X'.
zaa_st-mc5 = 'BOBST'.
endif.
if mac6 = 'X'.
zaa_st-mc6 = 'EMBA PRINTER'.
endif.
if mac7 = 'X'.
zaa_st-mc7 = 'EMBA GLUER'.
endif.
INSERT ZAA_ST.
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'RECORD INSERTED'.
ELSE.
MESSAGE E001(0) WITH 'RECORD NOT INSERTED'.
ENDIF.Hi friend,
How is your zaa_st table? Is it contains any field for check box (i.e: check_box). If yes, transfer 'X' to check_box field.
ex:
data: mac1 type c,
mac2 type c,
mac3 type c,
mac4 type c,
mac5 type c,
mac6 type c,
mac7 type c.
WHEN 'INSERT'.
if mac1 = 'X'.
zaa_st-mc1 = 'CORRUGATOR'.
endif.
if mac2 = 'X'.
zaa_st-mc2 = 'INLINE'.
endif.
if mac3 = 'X'.
zaa_st-mc3 = 'LANGSTON'.
endif.
if mac4 = 'X'.
zaa_st-mc4 = 'DRO'.
endif.
if mac5 = 'X'.
zaa_st-mc5 = 'BOBST'.
endif.
if mac6 = 'X'.
zaa_st-mc6 = 'EMBA PRINTER'.
endif.
if mac7 = 'X'.
zaa_st-mc7 = 'EMBA GLUER'.
endif.
* check box
zaa_st-check_box = 'X'.
INSERT ZAA_ST.
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'RECORD INSERTED'.
ELSE.
MESSAGE E001(0) WITH 'RECORD NOT INSERTED'.
ENDIF.
please check and reply
regards, -
Help for checkbox display as marked
HI ALL,
I am facing some problem displaying the check box as marked or flagged when displaying the record.
my requirement is that when i display a record it should also display the check box as marked. how do i do that. help me with the code.
i have 8 checkboxes and when each checkbox is marked, the respective field is filled with a record. and when i display ( using push button) the selected record , it should show me the check box as marked if the field is not empty. how do i do it?LOOP AT T_SFLIGHT INTO sflight.
WRITE:
/ SFLIGHT-FLDATE,
SFLIGHT-SEATSMAX,
SFLIGHT-SEATSOCC.
MODIFY CURRENT LINE FIELD FORMAT BOX INPUT on.
BOX = 'X'.
MODIFY CURRENT LINE FIELD VALUE BOX.
ENDLOOP.
ULINE.
Try the highlighted lines.It will helps u.I -
Can you use a single webhelp file to display different help for two apps?
I have updated a WebHelp project for a Windows app (let’s call it App1). Now the Dev team is creating a separately installed app (lets call it App2) that shares some of the same Help information as the original app. Both apps can be installed on the same system. The Help for App1 is accessed from an About menu in the app UI. Some of the topics are dialog boxes accessed from a question mark icon (?) at the bottom of the UI (I assume map IDs are involved in hooking up the dialog box Help - I need to verify this with Dev). The Help for App2 will be accessed from the App2 UI, which looks very similar to the App1 UI, except that certain features in App1 are missing from App2.
Here are the parameters:
In some cases, entire Help topics will apply to both apps.
In some cases, a portion of a topic for App1 will also apply to App2.
In some cases, a topic or topic portion for App 1 does not apply to App2 and vice versa
I’m using Robohelp 9 (RH9). Is there a way to allow App1 to display only the WebHelp that is relevant to that app and for App2 to display only the WebHelp that is relevant to that app? Is there a solution that would allow me to use one Help project and build only one Help file, with the result that App 1 displays only the Help it needs and App 2 displays only the Help it needs? Would conditionalizing the Help and providing two sets of WebHelp be the solution? Or is there some other alternative?You could do it in a couple of ways – one way is to have 1 project & use conditions to generate 2 flavours of WebHelp output, one for each App; the other way would be to use one project and create DUCC flavoured WebHelp – that way the use would choose to read the appropriate flavour of help for their App.
-
Can we provide new f4 help for a field in a list using grid display
Hi Gurus,
Can I provide F4 help for field in edit mode for (which is not using any std. data type, uses only custom char field ) in the list displayed using CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'.
I know this can be done using OOPS concepts but, I need to know whether it is possible in this manner.
And please dont suggest me to use CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE' to get automatic f4 help.
I need to provide F4 help with my own logic once I press F4 in the edited field in GRID_DISPLAY
Regards
Mac.Hi Macmohan,
You have to use F4AVAILABL attribute of fieldcatalog to achieve this.
lv_fldcat-f4availabl = 'X'.
lv_fldcat-ref_table = 'T582A'.
lv_fldcat-ref_field = 'ZEITB'.
This works with ALV GRID CONTROL
Regards
Abhii
Edited by: Abhii on Dec 16, 2009 3:37 PM -
How to display Help for the message in our program
Hi Experts,
Do any one know how to display the HELP for the Message in our ABAP program? Just like the user click the Long Text button in SE91.Do we have any function modules or Class method to do that? Thanks in advance.
JoeHi Joe,
While creating a message class in se93, theres a button (documentation) on the application tool bar. Click on that and you will be lead to a text editor where you can fill in the necessary documentation for the message you have created. -
Can i assign a collective srch help for select option in list display
can i assign a collective srch help for select option in list display
Hi,
Yes ,u can assign a collective search help for select-option in list display.
Eg:
Define your select option like this
SELECT-OPTIONS: s_vbeln FOR likp-vbeln MATCHCODE OBJECT vmva.
Regards,
Shiva. -
Creating search help for AFNAM, and display the hit list with values only
Hi guys,
I have created a search help for AFNAM, but the hit list displays all even if it is blank.
I want to display in the hit list the AFNAM with values and do not diplay the blank values...
Is it possible? How am i going to do it?
Thanks!
MarkHi Mark,
After selecting data use this statement.
DELETE it_table WHERE AFNAM is initial.
Regards,
Suneel G -
Help matching color profiles for 2 displays??
I have two cinema display monitors (one new, the other 1 year old), and I can't get them to share a color profile. Through SysPrefs I can calibrate them individually, but the results look completely different. The older monitor appears "pinker" overall, esp. in the light tones. When I finish calibrating, the last dialogue box asks to if I want to share the color profile, but I can't see the new profile in the other monitor's Display Profile list.
Any help is greatly appreciated!Did you uncheck "Show profiles for this display only"? If the displays are not the same model, and age, you probably want different profiles, anyway. To calibrate properly you need a colorimeter.
-
Display Help for Field not referred through Data Elements in ALV
Hi,
I am working on a report program where the output is in ALV_LIST display format.The internal table used to define the field catalog contains fields that are not declared using Data elements.For these fields, when i press F1 from the output, the message I receive is 'No Document Available'.Can someone tell me how I can attach a help document to these fields without creating a new data element for each of these fields....
For eg : My internal table that forms the field catalog is
Data : Begin of i_itab occurs 0,
matnr like mara-matnr,
Name(50),
end of i_itab.
When this table is displayed in ALV, if F1 is pressed on the field matnr the corresponding dictionary help pops out.But since the field Name has no help document attached to it, i cannot view any help for this..Kindly tell me how i can attach my own help document to this field.
Thanks,
SwathiHi,
This issue was solved using the followiing steps.
1. There is a parameter 'IT_EVENT_EXIT 'in the FM REUSE_ALV_LIST_DISPLAY or REUSE_ALV_GRID_DISPLAY.
2.Set the value of the field of this paramter as
EXIT-UCOMM= '&ELP' " F1
EXIT-BEFORE = 'X'
This will make the control go directly to the user command functio written inside the program rather than the standard SAP define duser command....
3. Inside the perform -usercommand in the ALV program use the FM HELP_DOCULINES_SHOW to show the appropriate help document
This method may be used to display help text for those fields/columns in the ALV which are not referred to the fields/data elements in the data dictionary tabel -
I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)
I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)
-
Extender for Mini Display Port. Need help.
I am running a setup with a 30m optical extender for DVI. I have just upgraded to the 8-core Mac Pro with 27" display which uses mini-display port. But that will give me maximum 1920x1200 resolution that is way too low for the 27" and I have to buy a converter from mini-display port to DVI.
Is there any available extender cables for mini display port (30 meter)?that will give me maximum 1920x1200 resolution
To go higher than 1920 wide, you need Dual Link. -
Search Help Not show/display the data
Dear All,
I have created a search help whith mannual itab of 4 entries. Itab is filled correctly, but when i see in the screen field it show the search help and display no record with the message 4 entries found; but I can't see the data.
pls. guide me what can be the problem
Thanks and Regards,
SohailHi,
If you want to Show the Search help for Particular Field in Screen painter , You must give the Code In PROCESS ON VALUE REQUEST(POV).
ie.
process on value-request.
field P9611-REQ_STATUS module GET_REQ_STATUS.
and in Program Give the internal table Fieldname in Capital Letter while Passing in Fuctional Module.
like.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'REQ_STATUS2' "internal table field
dynpprog = sy-dynnr
dynpnr = sy-dynnr
dynprofield = 'P9611-REQ_STATUS' "screen field name
value_org = 'S'
TABLES
value_tab = req_status_tab "internal table
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
With Regards
Kesavaperumal -
Search Help not getting displayed
Hi ,
I have included my own Search Help ZSH to Standard Search Help MAT1 which is related to field MATNR , in the following path..
In MAT1->MAT1_A, I have INCLUDED my Search Help.
I have tested it in SE11, it's working fine.
But, in VA01 screen when I press F4 on the MATNR field only 9 Search Helps are displayed, and my Z-Search Help is not getting displayed.
What additional settings should I do for the display of my Z-Search Help?
Thanks in advance,
Shivaa...Also look at this thread Search help enhancement - VA01
Regards,
Raymond
Maybe you are looking for
-
How to set the conversation id programmatically in a BPM process
Hi all, I am using BPM/SOA 11g PS3. Is it possible to set the conversation id programmatically in a BPM process starting with a none start event? I know I can set it easily if I use a BPM process starting with a message start event. All I have to do
-
Cluttered display on Vixia HF R400
I'm looking to buy an HF R400, which is a very nice camera except for one quirk. I've spent some hours looking at the one in the store and reading the directions, but can't solve this. In P mode the viewfinder is so cluttered with information that i
-
I am not able to format my creative Muvo V100 model mp3 pla
Hi I am not able to format my Creative Muvo V00 model Mp3 player.As i connect it to pc to format it is showing the icon but when i right click on that icon to get the format option it is not responding?me.More i tried in windows explorer also there a
-
Audio on audiobooks is distorted (too fast). Any way to slow it down?)
After installin iOS5.0 I downloaded several audiobooks from Audible.com and noted that the audio was too fast. Previously installed books were fine. The distorted books play fine on my iPhone 3GS and on the iTunes on my laptop. Deleted the "bad"audio
-
I get the message "Ipod detected but could not identify"when I plugged in my new 7th gen nano. Tried troubleshooting steps with no luck, Treid plugging in my old iPod that worked fine and I get the same message.