Help for my new E2500 router

Having problems setting up e2500 ?

Hi LarryEdwards!
Follow one of these depending on your internet connection type:
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service

Similar Messages

Help for my new E2500 router port forwarding

My home web hosting used to work. But because of changing ISP from Verizon to TWC, TWC gave me a modem-router and I bought my own Linksys E2500 router. Both Verizon and TWC services I subscribed are Dynamic IP. I use a third party to redirect the web traffic to my home.
TWC gave me a simple modem-router in a box. Input is coax and outputs are 4 ethernet ports. I use one of the 4 ethernet outputs of the TWC box to connect to the internet ethernet input port of the E2500. All my wire and wireless devices are now feeding off the E2500. All wireless and wired devices work and can browse internet through the E2500.
I have assigned one computer as the web server and set the internal IP addess of this computer as 192.168.1.128. This is the same for the setup with Verizon before.
I loaded the CD came with the E2500 router and can see the LAN 192.168.1.128.
My problem starts from here, I do not know how to set the port in E2500 to make the web traffic to 192.168.1.128
1. Using the E2500 CD, I click to "APPLICATION AND GAMING", then "SINGLE PORT FORWARDING". under the APPLICATION NAME, I select one of the box to HTTP and type in 128 under "TO IP ADDRESS". I then click ENABLED, then "save settings" . The 192.168.1 is fixed in this window, I can only type 128.
This does not work. I can browse internet but cannot access my website from any machines using domain name.
Then I tried:
2. with item 1 above, I continued to do SETUP>>BASIC SETUP>>DHCP RESEVERSATION. I can see the compute/sever name and the 192.168.1.128. I then click the "select" and save the client.
I restarted the computer/server, I unplug and plug the E2500 power. I check the server internal IP address and it is still the same. But I just cannot browse to my website. I can browse other places.
Any idea of what is wrong on my doing? Please help.
Solved!
Go to Solution.

Your modem is a router. Any incoming internet requests end at the modem/router. You have to configure port forwarding on the modem/router first before the E2500 will see anything incoming from the internet.
Alternatives:
1. Set the modem/router into "bridge" mode which turns it into a simple modem. Then you can connect directly to the internet with your E2500.
2. Set up the E2500 as simple access point and keep the modem/router as your main and only router. Then all forwarding is done on the modem/router.

Audio cable help for the new AppleTV.

Audio cable help for the new AppleTV.
Currently I have an original AppleTV with audio RCA plugs to mini plug into my BOSE speakers.
The 2nd Gen AppleTv has a Toslink input. I've looked at cables of Toslink to optical mini. Will this cable work? The optical mini part I'm not sure of what it is.
Thanks so much. The monitor I use doesn't have speakers.
This is the cable I see at Amazon
http://www.amazon.com/gp/product/B0002JFN1K/ref=ordcartshr?ie=UTF8&m=ATVPDKIKX0DER
Message was edited by: musicmaker

If I understand your question correctly, you want to connect your Apple TV2 to your Bose system using a mini plug.
You will need an optical to digital coax RCA converter (find it on Ebay about $15), then you can connect your mini cable. Here is a link to one I recently bought on Ebay: http://fwd4.me/nrQ

Help with a new RV082 Router

Greetings all,
I hope this is the correct place to post my request for help.
I just installed a new RV082 Router and I can access the internet without any problems.
We have a security camera at 192.168.1.28 on the LAN side. This works just fine on the LAN side but cannot be accessed from remote machines trying to log into the camera remotely.
The camera can be access on port 2782 without any problems using my Linux based Smoothwall router by going to any web browser such as Firefox or IE8 by keying in: http://xxx.xxx.xxx.xx:2782 and the camera’s web interface comes up allowing a user to login by keying in their id and password.
I’ve tried for a few hours now to change firewall setting but I still can’t get this to allow anyone to login remotely.
The Smoothwall router allows me to setup a pass through in the firewall by creating the follow entry:
Protocol                                  TCP
External Source IP                ALL
Source Port                           2782
Destination IP                        192.168.1.28
Destination Port                    2782
This works without any problems.
Can anyone help be configure the RV082 in order to gain access to the camera?
Any help will be appreciated. This is now driving me crazy.
Thanks

Hi Howard,
To forward the port in the RV082, go to Setup-> Forwarding. Click the Service Management and create a new service for port 2782 (i.e. Service Name IPCam, Protocol TCP, Port Range 2782 to 2782, Add to list, Save Setting) Go back to Forwarding and select the new Service from the drop down list. Enter the IP address of the camera and check the Enable box. Add to list and Save Settings at the bottom of the page. Please let us know if this works or if you need further assistance.

Exch2k7 to Exch2k10 - SSL 'request' help for the new server

Hi,
after read the article 'http://technet.microsoft.com/en-us/library/dd638158.aspx', we already have MBX and CAS 2007 running the lastest spk version and the SSL on the CAS 2007 is already working as 'LEGACY.DOMAIN.COM.BR' + 'Autodiscover.domain.com.br'
+ 'mail.domain.com.br'.
My question is regarding the SSL request for the new server:
>>> Can I start the REQUEST for the external Certification Authority using Windows Powershell or IIS console instead to use 'Exchange Management Shell'??
* I´m afraid about the time (days) to install CAS 2010 on the new server, start the request to the CA, do the internal steps to aprove, pay the tax, wait for generation and then install the new SSL on the new server...

Hi,
Based on my research, we can use IIS renew the certificate for IIS:
http://support.microsoft.com/kb/228991
And Windows power shell can help us to create certificate request:
http://social.technet.microsoft.com/Forums/exchange/en-US/1ba38a64-8776-444c-9f4d-a484075f3de2/powershell-to-request-a-certificate-renewal
Thanks,
Angela Shi
TechNet Community Support

I thought AppleTv & the reason for the new n router with USB HD port

I thought the whole reason for the new Airport n router with USB HD connection was to be able to connect a large, 500GB USB hard drive to the Aiport n. Then have ripped movies or photos stored on this network drive. And then AppleTV could stream from this hard drive? The 40gb AppleTV HD becomes mostly for the OS.
Now that is a powerful marriage of Apple hardware.

I thought the whole reason for the new Airport n router with USB HD connection was to be able to connect a large, 500GB USB hard drive to the Aiport n. And then AppleTV could stream from this hard drive?
Nope. As with iTunes Sharing, an Apple TV cannot use a library directly from a hard drive. You must have a computer running iTunes for the Apple TV to connect to.
You can, I believe, put your iTunes library on the Airport-shared hard drive, but I wouldn't be comfortable doing that if it were me. My view on such wireless hard drives is that they're best for file transfers and backups, not for use as one's primary storage device.

Help for my new ea3500

Hi
I'm a new wireless user and I have been having some trouble with my new router. Before I go into details, I have tried looking all over the internet for a fix I could do myself, but have had little luck. Also as I am new to this all, I don't really know that much so, explain it all very simply.
Ok so, for normal day to day web surfing (Youtube, downloading files and so on) it's fine, perfect actually. Fast and simple. But i'm a gamer. And this is where my router has problems (I think it's the router?). I play TF2 and L4D2, and I noticed some lag spikes in TF2 a few weeks ago. Looked around and found a WLAN optimizer. Installed it and TF2 worked fine. But for L4D2, not so. Last few nights I have seen huge lag spikes. I'm talking about over 2000 ping. It's random so it's not Vista's wireless searching.
I can't play L4D2 anymore and i'm worried that TF2 is going to be like this too now (I haven't played it for a while so I don't know). I really need some help here.
Like I said I don't know if it's the router or if it's my wireless card (I'm on a desktop so I had to get a card installed) or if it's Comcast. I do remember when I was hooked into a hardline I didn't have these issues. So obviously wireless is the issue.

You can customize the wireless settings of your router. Make sure to set a fixed channel. You can access this article for reference http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3698. Just to verify, are you experiencing it with 1 wireless computer? Perhaps, you can follow the steps below for the wireless adapter.
1) Open network connections
2) Wireless Network Connection -> Properties
3) Configure -> Advanced
4) List of changes:
Roam Tendency: Aggressive
Power Save Mode: Disabled
Minimum Power Consumption: Disabled
IBSS 54g(tm) Mode: 54g - Performance
AP Compatibility Mode: Higher Performance
Roaming Decision: Optimize Distance
5) Press OK, disable/enable your wireless connection and you're good to go!
NOTE: Windows Wireless Zero Configuration is making a spike lag every 1 minute exactly, we are talking here about wireless card problem which is causing lag every 8-10 seconds exactly. If you have lag every 1 minute, you have to stop Windows Wireless Zero Configuration service. Detailed how-to on this can be read on link below: http://www.geekstogo.com/forum/Wireless-Network-Ping-Spikes-t101910.html
Source: http://www.daniweb.com/hardware-and-software/networking/threads/47449/wireless-lag-spikes#

Help for a new MAC user

I just made the move from PC to MAC. I have and need to use my Office 2003. Can someone help a newbie to install it on my new Imac?

If that Office 2003 is for Windows, it will not install on OS X. The only way to get a Windows application on a Mac is using something like Boot Camp (Parallels, VMWare Fusion) and then a Windows system as well.

Need Help for configuring Floating static route in My ASA.

Hi All,
I need your support for doing a floating static route in My ASA.
I have tried this last time but i was not able to make it. But this time i have to Finish it.
Please find our network Diagram and configuration of ASA
route outside 0.0.0.0 0.0.0.0 6.6.6.6 1 track 1
route outside 0.0.0.0 0.0.0.0 6.6.6.6 1
route rOutside 0.0.0.0 0.0.0.0 3.3.3.3 10
route inside 10.10.4.0 255.255.255.0 10.10.3.1 1
route inside 10.10.8.0 255.255.255.0 10.10.3.1 1
route inside 10.10.9.0 255.255.255.0 10.10.3.1 1
route inside 10.10.15.0 255.255.255.0 10.10.3.1 1
route rOutside x.x.x.x 255.255.255.255 5.5.5.5 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 10.10.3.77 255.255.255.255 inside
http 10.10.8.157 255.255.255.255 inside
http 10.10.3.59 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sla monitor 123
type echo protocol ipIcmpEcho 8.8.8.8 interface outside
num-packets 3
frequency 10
sla monitor schedule 123 life forever start-time now
crypto ipsec transform-set cpa esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map vpn_cpa 1 match address acl_cpavpn
crypto map vpn_cpa 1 set peer a.a.a.a
crypto map vpn_cpa 1 set transform-set abc
crypto map vpn_cpa 1 set security-association lifetime seconds 3600
crypto map vpn_cpa interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
track 1 rtr 123 reachability
telnet 10.10.3.77 255.255.255.255 inside
telnet 10.10.8.157 255.255.255.255 inside
telnet 10.10.3.61 255.255.255.255 inside
telnet timeout 500
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 10.10.3.14
webvpn
tunnel-group .a.a.a.a ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
smtp-server 10.10.5.11
prompt hostname context
Cryptochecksum:eea6e7b6efe5d1a180439658c3912942
: end
i think half of the configuration stil there in the ASA.
Diagram.
Thanks
Roopesh

You have missed the last command in your configuration, Please check it again
route ISP1 0.0.0.0 0.0.0.0 6.6.6.6 track 1
route ISP2 0.0.0.0 0.0.0.0 3.3.3.3
sla monitor 10
type echo protocol ipIcmpEcho 8.8.8.8 interface ISP1
num-packets 3
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability
You can do NAT in same way, here the logical name of the interface will be different.
Share the result
Please rate any helpful posts.

Need help for my new iPad

I was wondering what kind of iPad case do u guys have? I just got my new iPad. So excited about it. Now I’m in the market for a nice iPad case for it. I’ve just looked into this one(http://www.pandamimi.com/leather-flip-case-crocodile-grains-for-ipad-a-2732.html). Am I on the right track? Will I be disappointed? Any other good options? Thanks.

I got a Yoobao V.4 and it's perfect for me.
The reasons I chose the Yoobao were, it provides a few angles of adjustment, which is useful for when I am using the iPad in bed.
It also has a angle especially for while typing on the iPad.
The Yoobao is made of real leather and looks very stylish and in my opinion does justice to the nice design of the iPad.
The Yoobao does not have a large surround that encroaches on to almost the edges of the iPad screen, which can in some cases, make moving apps to another screen or other function which involves moving to the extreme edge of the screen more difficult.
The Yoobao cases are available on EBay and on Amazon, but mostly in the US. I did manage to find a UK eBay seller.
Here's a link to a review on You Tube. It's a good review and helped me decide that it would be the perfect case for me.
http://m.youtube.com/index?desktopuri=%2F&gl=GB#/watch?xl=xl_blazer&v=eh-1B7cgSM

I need help for a new iTunes Update

i have a new ipad mini and my pc need or itunes need an update, but the update run.... and bevor it is by the end, he stop an the message is "he cant find.... itunes.msi
i dont find help in the internet
sorry for my english...

Hallo! Falls mein englisich keiner verstanden hat, hier auf deutsch...
ich habe eine ältere Version von itunes auf dem Rechner und seit dem men iphone IOS7 hat und ich mir ein ipad angeschafft habe.... kann sich weder das eine noch das andere gerät mit meinem itunes verbinden, denn es muss ein update her auf auf itunes 11.... leider funktioniert das nicht und ich brauche einfach hilfe
er unterbricht immer vor vor dem ende das update und findet eine itunes.msi datei nicht
auch kann ich itunes nicht mehr von meinem rechner löschen und ich bin wirklich genervt.
hilfe, danke im voraus

Help for a new Xperia Z1 owner

Just recieved my new Z1 and coming from iOS to Android is a daunting experience lol
Can anyone help me with 2 things I just can't seem to figure out?
1) the date/time clock on the home screen seems to get cut off. It shows P instead of PM and the same happens with the month is says Decem instead of December. How do I fix that?
2) How do I disable the share to facebook option for Music Unlimited? It shows the box is greyed out in settings and I can't change it, help!

1. I haven't seen that myself, but delete the widget > press and hold the widget until it vibrates then drag it to the bottom center (trashcan) > long press anywhere on the screen > widget > clock
2. You can't disable it, facebook and twitter are deeply integrated, if you log in to fb it won't be grey out
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Help for a new member

Hi there... first off, I am brand new to this forum and if there is a better place to post this, please let me know....
I am going to switch form my Dell desktop and laptop to a new 2.8 ghz imac (waiting for Oct. 26th). My interests are mostly web, pictures, learning to create dvds... However, i absolutely love MS Flight Sim X and want to be able to play it via BootCamp. Am I going to be sorely dissapointed with the new imac's performance? I have read lots of opinions on the video card (including if it is a 2600 xt in disguise). Any tips/advice would be appreciated... again, is there a better area to post this query?

Your best bet is the boot-camp forum discussion, there is no dedicated discussion forum for games.
You are more likely to get help from there.
Boot-camp

Help for a new one

hello,
i'm trying solaris, is nice for what i have seen, but i have some problems:
1 - i search for quite sometime but i cannot find how make a user
2 - as root i cannot connect on internet, is normal?
3 - i connected an external hdd and solaris didnt see it, why?
4 - solaris have a program to get new software like other linux distro?

Fargasta wrote:
hello,
i'm trying solaris, is nice for what i have seen, but i have some problems:
1 - i search for quite sometime but i cannot find how make a userThe command is useradd.
http://docs.sun.com/app/docs/doc/816-0211/6m6nc679u?a=view
2 - as root i cannot connect on internet, is normal?Shouldn't matter which user you use. The user should be able to connect to the Internet.
3 - i connected an external hdd and solaris didnt see it, why? Without more information it's unknown. Is it USB, Firewire, whatever?
4 - solaris have a program to get new software like other linux distro?OpenSolaris has something similar. If you just want to cruise for software try www.sunfreeware.com or blastwave.com
alan

Help for a new mac-garage band user-m audio pro setting imput

garage band help says click on preferences, but the preferences menu only will come up at start of project--then can only set audio output to m audio pro-audio imput is blank--so internal mike is usued not imput from m audio.
Somehow I managed to get it to work for one song--headphones from m audio montored tracks-guitar recorded using amp sims--been trying for hours to repeat that but only internal mike now will work.

You should be able to open garageband preferences
anytime. Are you sure your looking under Garageband >
Preferences.
And what interface are you using, is it the Fast
Tracks Pro?
Yes fast tracks pro--I finnaly was able to go to preferences when I exited garage band and openend it up again,but when I was working on the song and clicked on preferences it would not come up

Help for my new E2500 router

Similar Messages

Maybe you are looking for