Help for my new ea3500

Hi
I'm a new wireless user and I have been having some trouble with my new router. Before I go into details, I have tried looking all over the internet for a fix I could do myself, but have had little luck. Also as I am new to this all, I don't really know that much so, explain it all very simply.
Ok so, for normal day to day web surfing (Youtube, downloading files and so on) it's fine, perfect actually. Fast and simple. But i'm a gamer. And this is where my router has problems (I think it's the router?). I play TF2 and L4D2, and I noticed some lag spikes in TF2 a few weeks ago. Looked around and found a WLAN optimizer. Installed it and TF2 worked fine. But for L4D2, not so. Last few nights I have seen huge lag spikes. I'm talking about over 2000 ping. It's random so it's not Vista's wireless searching.
I can't play L4D2 anymore and i'm worried that TF2 is going to be like this too now (I haven't played it for a while so I don't know). I really need some help here.
Like I said I don't know if it's the router or if it's my wireless card (I'm on a desktop so I had to get a card installed) or if it's Comcast. I do remember when I was hooked into a hardline I didn't have these issues. So obviously wireless is the issue.

You can customize the wireless settings of your router. Make sure to set a fixed channel. You can access this article for reference http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3698. Just to verify, are you experiencing it with 1 wireless computer? Perhaps, you can follow the steps below for the wireless adapter.
1) Open network connections
2) Wireless Network Connection -> Properties
3) Configure -> Advanced
4) List of changes:
Roam Tendency: Aggressive
Power Save Mode: Disabled
Minimum Power Consumption: Disabled
IBSS 54g(tm) Mode: 54g - Performance
AP Compatibility Mode: Higher Performance
Roaming Decision: Optimize Distance
5) Press OK, disable/enable your wireless connection and you're good to go!
NOTE: Windows Wireless Zero Configuration is making a spike lag every 1 minute exactly, we are talking here about wireless card problem which is causing lag every 8-10 seconds exactly. If you have lag every 1 minute, you have to stop Windows Wireless Zero Configuration service. Detailed how-to on this can be read on link below: http://www.geekstogo.com/forum/Wireless-Network-Ping-Spikes-t101910.html
Source: http://www.daniweb.com/hardware-and-software/networking/threads/47449/wireless-lag-spikes#

Similar Messages

Audio cable help for the new AppleTV.

Audio cable help for the new AppleTV.
Currently I have an original AppleTV with audio RCA plugs to mini plug into my BOSE speakers.
The 2nd Gen AppleTv has a Toslink input. I've looked at cables of Toslink to optical mini. Will this cable work? The optical mini part I'm not sure of what it is.
Thanks so much. The monitor I use doesn't have speakers.
This is the cable I see at Amazon
http://www.amazon.com/gp/product/B0002JFN1K/ref=ordcartshr?ie=UTF8&m=ATVPDKIKX0DER
Message was edited by: musicmaker

If I understand your question correctly, you want to connect your Apple TV2 to your Bose system using a mini plug.
You will need an optical to digital coax RCA converter (find it on Ebay about $15), then you can connect your mini cable. Here is a link to one I recently bought on Ebay: http://fwd4.me/nrQ

Exch2k7 to Exch2k10 - SSL 'request' help for the new server

Hi,
after read the article 'http://technet.microsoft.com/en-us/library/dd638158.aspx', we already have MBX and CAS 2007 running the lastest spk version and the SSL on the CAS 2007 is already working as 'LEGACY.DOMAIN.COM.BR' + 'Autodiscover.domain.com.br'
+ 'mail.domain.com.br'.
My question is regarding the SSL request for the new server:
>>> Can I start the REQUEST for the external Certification Authority using Windows Powershell or IIS console instead to use 'Exchange Management Shell'??
* I´m afraid about the time (days) to install CAS 2010 on the new server, start the request to the CA, do the internal steps to aprove, pay the tax, wait for generation and then install the new SSL on the new server...

Hi,
Based on my research, we can use IIS renew the certificate for IIS:
http://support.microsoft.com/kb/228991
And Windows power shell can help us to create certificate request:
http://social.technet.microsoft.com/Forums/exchange/en-US/1ba38a64-8776-444c-9f4d-a484075f3de2/powershell-to-request-a-certificate-renewal
Thanks,
Angela Shi
TechNet Community Support

Help for a new MAC user

I just made the move from PC to MAC. I have and need to use my Office 2003. Can someone help a newbie to install it on my new Imac?

If that Office 2003 is for Windows, it will not install on OS X. The only way to get a Windows application on a Mac is using something like Boot Camp (Parallels, VMWare Fusion) and then a Windows system as well.

Need help for my new iPad

I was wondering what kind of iPad case do u guys have? I just got my new iPad. So excited about it. Now I’m in the market for a nice iPad case for it. I’ve just looked into this one(http://www.pandamimi.com/leather-flip-case-crocodile-grains-for-ipad-a-2732.html). Am I on the right track? Will I be disappointed? Any other good options? Thanks.

I got a Yoobao V.4 and it's perfect for me.
The reasons I chose the Yoobao were, it provides a few angles of adjustment, which is useful for when I am using the iPad in bed.
It also has a angle especially for while typing on the iPad.
The Yoobao is made of real leather and looks very stylish and in my opinion does justice to the nice design of the iPad.
The Yoobao does not have a large surround that encroaches on to almost the edges of the iPad screen, which can in some cases, make moving apps to another screen or other function which involves moving to the extreme edge of the screen more difficult.
The Yoobao cases are available on EBay and on Amazon, but mostly in the US. I did manage to find a UK eBay seller.
Here's a link to a review on You Tube. It's a good review and helped me decide that it would be the perfect case for me.
http://m.youtube.com/index?desktopuri=%2F&gl=GB#/watch?xl=xl_blazer&v=eh-1B7cgSM

I need help for a new iTunes Update

i have a new ipad mini and my pc need or itunes need an update, but the update run.... and bevor it is by the end, he stop an the message is "he cant find.... itunes.msi
i dont find help in the internet
sorry for my english...

Hallo! Falls mein englisich keiner verstanden hat, hier auf deutsch...
ich habe eine ältere Version von itunes auf dem Rechner und seit dem men iphone IOS7 hat und ich mir ein ipad angeschafft habe.... kann sich weder das eine noch das andere gerät mit meinem itunes verbinden, denn es muss ein update her auf auf itunes 11.... leider funktioniert das nicht und ich brauche einfach hilfe
er unterbricht immer vor vor dem ende das update und findet eine itunes.msi datei nicht
auch kann ich itunes nicht mehr von meinem rechner löschen und ich bin wirklich genervt.
hilfe, danke im voraus

Help for a new Xperia Z1 owner

Just recieved my new Z1 and coming from iOS to Android is a daunting experience lol
Can anyone help me with 2 things I just can't seem to figure out?
1) the date/time clock on the home screen seems to get cut off. It shows P instead of PM and the same happens with the month is says Decem instead of December. How do I fix that?
2) How do I disable the share to facebook option for Music Unlimited? It shows the box is greyed out in settings and I can't change it, help!

1. I haven't seen that myself, but delete the widget > press and hold the widget until it vibrates then drag it to the bottom center (trashcan) > long press anywhere on the screen > widget > clock
2. You can't disable it, facebook and twitter are deeply integrated, if you log in to fb it won't be grey out
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Help for a new member

Hi there... first off, I am brand new to this forum and if there is a better place to post this, please let me know....
I am going to switch form my Dell desktop and laptop to a new 2.8 ghz imac (waiting for Oct. 26th). My interests are mostly web, pictures, learning to create dvds... However, i absolutely love MS Flight Sim X and want to be able to play it via BootCamp. Am I going to be sorely dissapointed with the new imac's performance? I have read lots of opinions on the video card (including if it is a 2600 xt in disguise). Any tips/advice would be appreciated... again, is there a better area to post this query?

Your best bet is the boot-camp forum discussion, there is no dedicated discussion forum for games.
You are more likely to get help from there.
Boot-camp

Help for a new one

hello,
i'm trying solaris, is nice for what i have seen, but i have some problems:
1 - i search for quite sometime but i cannot find how make a user
2 - as root i cannot connect on internet, is normal?
3 - i connected an external hdd and solaris didnt see it, why?
4 - solaris have a program to get new software like other linux distro?

Fargasta wrote:
hello,
i'm trying solaris, is nice for what i have seen, but i have some problems:
1 - i search for quite sometime but i cannot find how make a userThe command is useradd.
http://docs.sun.com/app/docs/doc/816-0211/6m6nc679u?a=view
2 - as root i cannot connect on internet, is normal?Shouldn't matter which user you use. The user should be able to connect to the Internet.
3 - i connected an external hdd and solaris didnt see it, why? Without more information it's unknown. Is it USB, Firewire, whatever?
4 - solaris have a program to get new software like other linux distro?OpenSolaris has something similar. If you just want to cruise for software try www.sunfreeware.com or blastwave.com
alan

Help for a new mac-garage band user-m audio pro setting imput

garage band help says click on preferences, but the preferences menu only will come up at start of project--then can only set audio output to m audio pro-audio imput is blank--so internal mike is usued not imput from m audio.
Somehow I managed to get it to work for one song--headphones from m audio montored tracks-guitar recorded using amp sims--been trying for hours to repeat that but only internal mike now will work.

You should be able to open garageband preferences
anytime. Are you sure your looking under Garageband >
Preferences.
And what interface are you using, is it the Fast
Tracks Pro?
Yes fast tracks pro--I finnaly was able to go to preferences when I exited garage band and openend it up again,but when I was working on the song and clicked on preferences it would not come up

Urgent help for extremely new newbie - please.

I have been asked to set up a Labview program to graph and log
thermocouple temperature measurements from two Keithley 2001 Multimeters
and a DC voltage from HP 34420A nano Volt/Micro Ohm Meter. All three are
instruments are IEEE interfaced to a Windows 98 machine running Labview
(version 5.0 I think.) I have a couple of weeks to get the job done.
The problem is that I have never used Labview. I am an experienced C,
Fortran, BASIC programmer but this graphical system is completely new.
My situation is complicated because I am told the experienced person who
was originally going to set this up left under bad circumstances and
took many of the manuals. I would greatly appreciate any and all help I
can get.
Please feel free to send responses directly to me.
[email protected]
Thanks,
Stan Thomas

In article
<[email protected]>,
Stan Thomas
wrote:
> I have been asked to set up a Labview program
to graph and log
> thermocouple temperature measurements from two
Keithley 2001 Multimeters
> and a DC voltage from HP 34420A nano Volt/Micro
Ohm Meter. All three are
> instruments are IEEE interfaced to a Windows 98
machine running Labview
> (version 5.0 I think.) I have a couple of
weeks to get the job done.
> The problem is that I have never used Labview.
I am an experienced C,
> Fortran, BASIC programmer but this graphical
system is completely new.
> My situation is complicated because I am told
the experienced person who
> was originally going to set this up left under
bad circumstances and
> took man
y of the manuals. I would greatly
appreciate any and all help I
> can get.
>
> Please feel free to send responses directly to
me.
>
> [email protected]
>
> Thanks,
>
> Stan Thomas
>
>
All manuals are available at
http://www.natinst.com/manuals/
They also have an example program database at
http://www.natinst.com/support/epd/
Sten Karlson
D/A Production AB
SWEDEN
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.

Need help for a new layers to pdf script

Hello.
Can anyone help me to make a script for layers to pdf?
ADHESIVE, WHITE, Layer-8, Layer-7, Layer-6, Layer-5, Layer-4, Layer-3, Layer-2 and Layer-1 needs to be on seperate pages.
Jobbnr and Passmerk / Registrationm. (incl. sub-layers) needs to be on all pages!!
HJELPELINJER, COLOR, CARRIER, Guides and Field Background don`t need a page.
Is it possible to make such a script?

You might find some thoughts / assistance in this similar thread?
http://forums.adobe.com/message/5082166

Help for the new user

Apologies for the fairly basic nature of these questions, normally I would just head into an Apple Store and get some assistance. Unfortunately I am in the middle of nowhere without a reliable internet connection and want to back up my Macbook.
Any help would be appreciated;
1. I intend to grab a 500gb Time Capsule and back up over an ethernet cable, I do not have an internet connection that I can link the time capsule into at the moment - will there be any issues???
2. Does time capsule backup via bluetooth (sorry if that is a dumb question I dont know much about bluetooth)??
3. When I head home, will the time capasule easily intergrate into my wifi network?? and
4. Is there a way I can update the software in the time capsule if required, through my Macbook - without having the time capsule connected to the internet??
Cheers

Hello CON960. Welcome to the Apple Discussions!
1. I intend to grab a 500gb Time Capsule and back up over an ethernet cable, I do not have an internet connection that I can link the time capsule into at the moment - will there be any issues???
The Time Capsule (TC) does not require an Internet connection in order to be the destination for backups from your MacBook (MB). Your MB can perform these backups while connected either by wire or wirelessly to the TC.
2. Does time capsule backup via bluetooth (sorry if that is a dumb question I dont know much about bluetooth)??
No. There are no provisions on any of the AirPorts, including the TC, for Bluetooth.
3. When I head home, will the time capasule easily intergrate into my wifi network??
Not knowing exactly what your home Wi-Fi network consists of, it would be hard to say, but the TC is capable of integrating with most existing wired or wireless routers.
4. Is there a way I can update the software in the time capsule if required, through my Macbook - without having the time capsule connected to the internet??
Sorry. Not that I'm aware of.

Help for my new E2500 router port forwarding

My home web hosting used to work. But because of changing ISP from Verizon to TWC, TWC gave me a modem-router and I bought my own Linksys E2500 router. Both Verizon and TWC services I subscribed are Dynamic IP. I use a third party to redirect the web traffic to my home.
TWC gave me a simple modem-router in a box. Input is coax and outputs are 4 ethernet ports. I use one of the 4 ethernet outputs of the TWC box to connect to the internet ethernet input port of the E2500. All my wire and wireless devices are now feeding off the E2500. All wireless and wired devices work and can browse internet through the E2500.
I have assigned one computer as the web server and set the internal IP addess of this computer as 192.168.1.128. This is the same for the setup with Verizon before.
I loaded the CD came with the E2500 router and can see the LAN 192.168.1.128.
My problem starts from here, I do not know how to set the port in E2500 to make the web traffic to 192.168.1.128
1. Using the E2500 CD, I click to "APPLICATION AND GAMING", then "SINGLE PORT FORWARDING". under the APPLICATION NAME, I select one of the box to HTTP and type in 128 under "TO IP ADDRESS". I then click ENABLED, then "save settings" . The 192.168.1 is fixed in this window, I can only type 128.
This does not work. I can browse internet but cannot access my website from any machines using domain name.
Then I tried:
2. with item 1 above, I continued to do SETUP>>BASIC SETUP>>DHCP RESEVERSATION. I can see the compute/sever name and the 192.168.1.128. I then click the "select" and save the client.
I restarted the computer/server, I unplug and plug the E2500 power. I check the server internal IP address and it is still the same. But I just cannot browse to my website. I can browse other places.
Any idea of what is wrong on my doing? Please help.
Solved!
Go to Solution.

Your modem is a router. Any incoming internet requests end at the modem/router. You have to configure port forwarding on the modem/router first before the E2500 will see anything incoming from the internet.
Alternatives:
1. Set the modem/router into "bridge" mode which turns it into a simple modem. Then you can connect directly to the internet with your E2500.
2. Set up the E2500 as simple access point and keep the modem/router as your main and only router. Then all forwarding is done on the modem/router.

Little Help For the New Bee

Hello,
though I work a lot with FCP and all the other pro applications, I have never been in a professional enough environment to have to use Compressor. I have a file that is an MPEG 4 Movie. Dimensions: 720X304. I just need to be able to put it into Final Cut Pro and edit with the best quality. How do I go about converting? I messed around with it for a while, but with no success. It seems very straight foward, but I think I am missing something. Please help if you can.
thanks,
Toolius

Hey Toolius
if i am reading this information correctly, this file's codec is a mpeg, but with AAC audio. are you SURE that you didnt leave out the 4 in mpeg4???
what is the extension of the file, *.mov, *.mp4?
if you want to edit in FCP, then all you have to do is a simple transcode to the file.
seems like you have a widescreen 16:9 (maybe 1.85 or 2.35) file.
you can do this transcode in one of two ways, via QT Pro itself, or Mpegstreamclip.
would you want to keep your video as 16:9 or 4:3?
if you want it 16:9 you have 2 options, 720x480 anamorphic or 960x540 (this is for 16:9, 1.78 FF, so yo will still have mattes).
if you want it 4:3 then you can use 720x480.
the only thing with all this is that your footage is compressed, so try to keep it as lossless as possible throughtout the whole process, like that, you minimize cascade compression (basically compressing the already compressed footage).
make sure that you also keep in mind your codec sequence, like that, you will NOT have to render this footage!~
Mikey M.

Help for my new ea3500

Similar Messages

Maybe you are looking for