Help for printer set up on NW 3.12.

Does any one can help to set up a printer on my NW 3.12 server??
Thanks!
Dan

Duplicate post (netware.discontinued forum). Please do not post a query
in more than one forum at once, thank you.
Andrew C Taubman
Novell Support Forums Volunteer SysOp
http://support.novell.com/forums
(Sorry, support is not provided via e-mail)
Opinions expressed above are not
necessarily those of Novell Inc.

Similar Messages

Indesign for print set up

I am currently working on a project containing a variety of print media, all of which will be exported as a pdf directly from Indesign. What I dont understand is which colour profile to set for each of my prgrams within creative suite (obviously these all need to be the same). I aim to send these to a printer within the U.K, how do I select the correct profile? Does it really make a big difference?

Thanks for the link, really usefull. Slowly starting to put together what I need to do, thanks a lot
regards,
matt
Date: Tue, 12 Jun 2012 20:52:26 -0600
From: [email protected]
To: [email protected]
Subject: Indesign for print set up
    Re: Indesign for print set up
    created by Rik Ramsay in InDesign - View the full discussion
For print work in the UK or Europe, I would suggest using "Europe Pre Press 2 (FOGRA 27)" as your profile as you are more likely to find a local printer using this or a similar profile. However, if you are concerned, you could always ask the printer and see what profile they suggest. This link might give you some help with print work: http://www.smashingmagazine.com/2009/10/27/10-pre-press-tips-for-perfe ct-print-publishing/
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4487970#4487970
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4487970#4487970. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Needs steps for Printer setting for User-customized Paper Size

Hii
I need steps for Printer setting for User-customized Paper Size
for my requirement i hav to design this for a paper which is 9cm length and width 23cm and printer is Laser printer
Thanks
Ravi

Hi ,
Kindly send me materials regarding printer configuration , I need to confiure a printer .Kindly help me.
My ID is rakeshhaari at gmail dot com
Regards,
Hari

Why is my page set up drop down different from your illustration in help for printing background

''duplicate - https://support.mozilla.com/en-US/questions/830795''
The page set up drop down menu looks nothing like the illustration in help. It does not include a box to check for "print background. How do I print background

first, does it sound like I set it up correctly from what I wrote?
Yes, all sounds correct.
Second, I heard that adding a b/g AX to the network will slow everything down to b/g speeds but I have also read that simply using B/G AX's to add speakers by joining the network will not slow down the N network....which is it?
The b/g AX devices will not slow down the network unless they are actively streaming AirTunes. Even then, audio streaming does not require a great deal of bandwidth, so for the most part, the effect would be negligible. Don't worry about it.
Is my network slowed down to b/g speeds because of my speaker set up or not?
The speed on your network will depend on a number of factors..are you downloading something while copying something else? Are you simply browsing? How far is the computer from the closest wireless access point?
You can check your current available bandwidth on your local network by doing the following:
Hold down the option key on your Mac while you click on the fan shaped AirPort icon at the top of the screen. Look for the Transmit Rate number.
"g" wireless = 54 Mbps
What do you see?
Oh, and by the way, I don't know if this matters, but while the time capsule serves as the main base station, it is in bridge mode because it is plugged into a 2wire gateway router.
If the Time Capsule is in bridge mode, it cannot act as the main base station. If you want, you could think of it that way if you are using the wireless on the Time Capsule as your preferred network, but the Time Capsule is not the "main" router.
Message was edited by: Bob Timmons

Webiste for printer set up is forbidden and will not function.

I need help, I bought this hp printer earlier this afternoon at pc world and i am now trying to set it up to my acer chrome book, and as these laptops don't have a cd/dvd space i have to enter the address www.hp.com/ePrint/ENVY4500... this will not work for me and says this website is forbidden, thankyou for listening, regards brian.

Hi , I see that you're experiencing issues downloading the HP Software for your HP ENVY 4507 e-All-in-One Printer. I would be happy to help you.
Which browser are you using? Try using another browsers like Internet Explorer, FireFox or Google Chrome. Click here: EN4500_198.exe, to download the Full Feature Software and Drivers for your HP ENVY 4500 e-All-in-One Printer.
How To Fix the 403 Forbidden Error:Check for URL errors and make sure you're specifying an actual web page file name and extension, not just a directory. Most websites are configured to disallow directory browsing so a 403 Forbidden message when trying to display a folder instead of a specific page is normal and expected.
Important: This is, by far, the most common reason for a web site to return the 403 Forbidden error. Be sure you fully explore this possibility before investing time in the troubleshooting below.
Tip: If you operate the website in question, and you want to prevent 403 errors in these cases, enable directory browsing in your web server software.
Clear your browser's cache. Issues with a cached version of the page you're viewing could be causing 403 Forbidden issues.
Log in to the website, assuming it's possible and appropriate to do so. A 403 Forbidden message could mean that you need additional access before you can view the page.
Typically, a website produces a 401 Unauthorized error when special permission is required but sometimes a 403 Forbidden is used instead.
Clear your browser's cookies, especially if you typically log in to this website and logging in again (the last step) didn't work.
Note: While we're talking about cookies, be sure you have them enabled in your browser, or at least for this website, if you do actually log in to access this page. The 403 Forbidden error in particular indicates that cookies may be involved in obtaining proper access.
Contact the website directly. It's possible that the 403 Forbidden error is a mistake, everyone else is seeing it too, and the website isn't yet aware of the problem.
See my Website Contact Information list for contact information for lots of popular websites. Most sites have support-based accounts on social networking sites, making it really easy to get a hold of them. Some even have support email addresses and telephone numbers.
Tip: Twitter is usually abuzz with talk when a site goes down completely, especially if it's a popular site. The best way to focus in on talk about a downed site is by searching for#websitedown on Twitter, as in #amazondown or #facebookdown. While this trick certainly won't work if Twitter is down with a 403 error, it's great for checking on the status of other downed sites.
Contact your ISP if your still getting the 403 error, especially if you're pretty sure that the website in question is working for others right now.
It's possible that your public IP address, or your entire Internet Service Provider, has been blacklisted, a situation that could produce a 403 Forbidden error, usually on all pages on one or more sites.Source- http://pcsupport.about.com/od/findtheproblem/ht/wrongurl.htm Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good Luck!

Help for printing PDF docs.

Hi, I am trying to print a PDF doc, and a window appear is " Prop Res DLL not loaded "!!!
I can print everything except PDF file
Thanks for you help
PS: What is the meaning of ERROR Prop .....etc
Ce message a été modifié par: chomedey657

Hi, I am trying to print a PDF doc, and a window appear is " Prop Res DLL not loaded "!!!
I can print everything except PDF file
Thanks for you help
PS: What is the meaning of ERROR Prop .....etc
Ce message a été modifié par: chomedey657

Help for printing textarea

hi
How can I print a long line.
for exmple
0123456789012345678901234567890123456789012345678901234567890123456789
if i print a textarea with this content i get a printout that looks like this:
012345678901234567890123456
do i have to set anything so that the line is wrapped??
my code looks like this:
1st part:
public class Ta extends JTextArea implements Printable{
     public Ta(){
          super();
          this.setPreferredSize(new Dimension(500,500));
     public Ta(int x, int y){
          super(x,y);
     public int print(Graphics g, PageFormat pf,int pi){
          if (pi >= 1) {
               return Printable.NO_SUCH_PAGE;
          Graphics2D g2 = (Graphics2D) g;
          g2.translate(pf.getImageableX(),pf.getImageableY());
          Font f = new Font("Monospaced", Font.PLAIN,6);
          g2.setFont (f);
          g2.drawString(this.getText(),100,100);
          this.paint(g2);
          return Printable.PAGE_EXISTS;
2nd:
          b.addActionListener(new ActionListener(){
               public void actionPerformed(ActionEvent e){
                    if(pj.printDialog()){
                         PageFormat pformat = pj.defaultPage();
                         pformat.setOrientation(PageFormat.PORTRAIT);
                         System.out.println(pj.defaultPage());
                         pj.setPrintable(ta,pj.pageDialog(pformat));
                         try{
                              pj.print();
                         catch(PrinterException p){

You got me wrong!My deepest regrets! :-)
Wait, somewhere I had seen some example of just this.
Ok... "found" it.
(As you shall see, the code is actually decompiled -by some demo application not commercial, mind you- so to find this useful you need to try to understand what all this variables are used for)
class NotepadPrinter implements Printable {
public int print(Graphics g, PageFormat pageformat, int i) {
    Graphics2D graphics2d = (Graphics2D)g;
    try {
      return paintText(graphics2d, pageformat, i);
    } catch(Exception exception) {
      exception.printStackTrace();
    return 1;
int paintText(Graphics2D graphics2d, PageFormat pageformat, int i) throws Exception {
    int j = (int)pageformat.getImageableHeight();
    int k = (int)pageformat.getHeight();
    graphics2d.translate(pageformat.getImageableX(), pageformat.getImageableY());
    graphics2d.setFont(getEditor().getGraphics().getFont());
    graphics2d.setColor(Color.black);
    String s = null;
    try {
      s = getEditor().getText(0, getEditor().getDocument().getLength());
    } catch(BadLocationException badlocationexception) {
      throw new Exception(badlocationexception.getMessage());
    java.awt.font.FontRenderContext fontrendercontext = graphics2d.getFontRenderContext();
    java.awt.geom.Rectangle2D rectangle2d = graphics2d.getFont().getMaxCharBounds(fontrendercontext);
    double d = rectangle2d.getWidth();
    double d1 = rectangle2d.getHeight() + 2D;
    double d2 = pageformat.getImageableWidth();
    int l = (int)(d2 / d);
    String as[] = getLines(s);
    int i1 = as.length;
    double d3 = d1 * (double)i1;
    int j1 = (int)((double)j / d1);
    int k1 = i1 / j1 + 1;
    int l1 = j1 * i;
    int i2 = getNumLinesForPage(as, i, j1);
    int j2 = (l1 + i2) - 1;
    if(l1 >= as.length)
      return 1;
    String as1[] = new String[i2];
    System.arraycopy(as, l1, as1, 0, i2);
    float f = 10F;
    LineMetrics linemetrics = graphics2d.getFont().getLineMetrics("A", fontrendercontext);
    double d4 = (double)linemetrics.getHeight() + 2D;
    for(int k2 = 0; k2 < as1.length; k2++) {
      graphics2d.drawString(as1[k2], 10F, f);
      f = (float)((double)f + d4);
    return 0;
String[] getLines(String s) {
    StringTokenizer stringtokenizer = new StringTokenizer(s, "\n");
    Vector vector = new Vector();
    while(stringtokenizer.hasMoreTokens())
      vector.add(stringtokenizer.nextToken()));
    return (String[])vector.toArray(new String[0]);
int getNumLinesForPage(String as[], int i, int j) {
    if(as.length < (i + 1) * j) {
      int k = as.length - i * j;
      return k;
    } else {
      return j;
}

Need help for printing/exporting in the right format

Hi,
i'm layouting a magazine for my graduation class. And I almost finished it, but I've got a problem with printing it like I want it to be printed. I use the newest Trial Version of Adobe InDesign. The format of the magazine is A4, but when I export it as PDF (printing is the same) two pages (each A5) are exported on one horizontal A4 page. I want to have each page on one A4. Can somebody help me and say what I have to do, to get it work in my way?
I hope you can help me, and I'm sorry if this is a silly question, but InDesign is a very complicated Software
Thanks

Exporting to PDF shouldn't resize the page. Does the exported PDF look the way you want it to?
Here's all you need to know to export the file:
File > Adobe PDF Presets > (pick a format - if you're printing from a desktop printer High Quality Print is a good choice)
It might give you a warning about Transparency Blend Space which you can change under Edit > Transparency Blend Space
Make sure spreads is not checked.
If the problem is happening from Acrobat, check all of the settings in your print dialogue.
Good luck!

Need help for printer application status

Hi,
I am using jdeveloper11.1.1.2.0.Actually standalone java application,I want to know status of the printer,If there is no paper inside printer then message should be display no paper in the printer,
if i did printout but after 2 second i want to cancel the print then message should be also display ...
my code is below..
public void invokePrintJob(ActionEvent actionEvent) {
// Add event code here...
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
Boolean printerFound = false;
for (int i = 0; i < printers.length && !printerFound; i++) {
if (printers.getName().equalsIgnoreCase(getSelectedPrinter())) {
printerFound = true;
PrintService printer = printers[i];
UploadedFile file = getTheFile();
String fileName = getTheFile().getFilename();
// String file = getTheFile();
//PrintJobAdapter pr = new PrintJobAdapter();
InputStream input;
try {
input = new BufferedInputStream((file.getInputStream()));
Doc doc = new SimpleDoc(input, DocFlavor.INPUT_STREAM.PNG, null);
PrintRequestAttributeSet attrs = new HashPrintRequestAttributeSet();
attrs.add(new Copies(2));
attrs.add(OrientationRequested.LANDSCAPE);
JobName name = new JobName(fileName ,null);
attrs.add(name);
DocPrintJob job = printer.createPrintJob();
PrintJobWatcher pjDone = new PrintJobWatcher(job);
job.print(doc, attrs);
pjDone.waitForDone();
System.out.println("--------jobRunning-end----------");
input.close();
} catch (PrintException e) {
System.out.println(e.getMessage());
addFacesErrorMessage(e.getMessage());
} catch (FileNotFoundException e) {
System.out.println(e.getMessage());
addFacesErrorMessage(e.getMessage());
}catch (IOException ioe) {
// TODO: Add catch code
ioe.printStackTrace();
public static class PrintJobWatcher {
// true iff it is safe to close the print job's input stream
boolean done = false;
PrintJobWatcher(DocPrintJob job) {
// Add a listener to the print job
job.addPrintJobListener(new PrintJobAdapter() {
public void printJobCanceled(PrintJobEvent pje) {
System.out.println("-------printJobCanceled--------");
allDone();
public void printJobCompleted(PrintJobEvent pje) {
System.out.println("------printJobCompleted---------");
allDone();
public void printJobFailed(PrintJobEvent pje) {
System.out.println("----------printJobFailed-------");
allDone();
public void printJobNoMoreEvents(PrintJobEvent pje) {
System.out.println("--------printJobNoMoreEvents---------");
allDone();
@Override
public void printJobRequiresAttention(PrintJobEvent pje) {
System.out.println("-----------printJobRequiresAttention----------");
allDone();
@Override
public void printDataTransferCompleted(PrintJobEvent pje) {
System.out.println("-------printDataTransferCompleted---------");
allDone();
void allDone() {
// System.out.println("---------------");
synchronized (PrintJobWatcher.this) {
done = true;
PrintJobWatcher.this.notify();
public synchronized void waitForDone() {
try {
while (!done) {
wait(1000);
} catch (InterruptedException e) {
e.printStackTrace();
Please help me..

Help with what? What's the actual problem?
As far the code looks horrible. This kind of logic belongs in a fitler rather than a backing bean. You use empty strings instead of nulls. You stores passwords plain and unhashed in DB. You compares the password in Java instead of in DB. You stores password in a cookie. Your query is unsafe for SQL injections. You're reloading the driver class everytime when you acquire the connection. You're leaking DB connections. The application will crash sooner or later when the DB run out of connections.
Is that all what you need to know?

Help for customization setting

hello all Gurus,
I m a MM consultant but as a sole I m having responsibility for rollout of new plant for FICO, MM, PP, SD modules. Almost cusomization is completed from implementation team but work yet has not started on system. SO can any one of u provide me the checklist for MUST TO DO customization setting for SD or link for that.....
Regards
Edited by: sapsarang on Jun 14, 2009 7:33 AM

Hi there,
Check the below link,...... It will clear ur doubt.....
[Checklist|http://hosteddocs.ittoolbox.com/KL122206.pdf]
Thanks,
Raja

ICC help for printing to my Canon IP5200 from Aperture

Am trying to find some ICC color profiles for my Canon IP 5200r printer. Since my reinstallation of Aperture my Canon profiles for the IP 5200 have disappeared. I looked for them on my old printer profiles. i did find some profiles that i had made mysef but no canon provided profiles.
I have gone to the Canon website and look for ICC profiles on their site and cannot find any. Any suggestions on what ICC profile settings to use to print from aperture to my canon 5200r. Any suggestions

re-instaled canon driver and the canon ICC profiles showed up profiles in aperture

Help for Newbie setting up business

Hi! Total newbie here. Any help would be appreciated.
I use a Mac. I'm developing a web internet business. I'm planning to install and use Adobe Scene 7 for all it's features. In reading about Adobe Scene 7 it says it is 'hosted'. I am planning on using Earth Girl Hosting for my business and I was hoping that I could use Adobe Scene 7 while using Earth Girl hosting. Does anyone understand if I can do this and is it problematic if I do?
What exactly do they mean by Adobe Scene 7 is hosted? Does that mean they host your whole web site?
Later on I was planning to take a course at SMU that uses and teaches Dreamweaver. If I have Adobe Scene 7 installed and using it in my business, will I be able to use Dreamweaver too........will they interface okay?
Thanks so much for any help......... break it down for me on the newbie level if possible!

What exactly do they mean by Adobe Scene 7 is hosted? Does that mean they host your whole web site?
This means that the program that is used to develop the web site is operated from an Adobe server, the same server that will host the site.
Later on I was planning to take a course at SMU that uses and teaches Dreamweaver. If I have Adobe Scene 7 installed and using it in my business, will I be able to use Dreamweaver too........will they interface okay?
No, you will not be able to just use Dreamweaver to continue maintenance of the web site that is created by Scene 7. There may be small parts that are visible in the browser that you can use in Dreamweaver, but the dynamic parts will not be available.
If time is of essence, the low learning curve of Scene 7 will probably help you get on line quickly. After that, either maintain it using the same tools or forget about it and start producing real web sites with Dreamweaver or other compatible web authoring software.

I need help for printing service in Java

Hello :
I need to print some file from java program .
I did every thing , but when i run the program : it didn't return any printer as print service from the system, although I install 2 printers in my system.
by the way : i use Windows XP

I was in a rush this morning and forgot my crystal ball. Please post your code and remember to use the code tags.

Need quick help for printer that vanished

My printer was giving me trouble (it wasn't printing when I asked it to); while monkeying around in the printer setup utility, I somehow managed to delete the printer (an Epson Stylus Color 740) from my system--so now my computer thinks I do not have a printer hooked up! How do I get that beautiful printer of mine back in the loop? Thanks!

There should be an "Add Printer" button on the Printer Setup utility, click it and follow the prompts. There is also a menu item under "Printers" that brings up the same dialog

Conditional Help for Multiple Customers

In the company I work for we have a software product that is configurable for different customers. I have a master online help that contains ALL the components. When we are sending a particular iteration of the software to a customer with their specific set of components exposed, I have to generate a specific help for this set of components. I have all the different components conditionalised so that I can pick and choose the components needed for each customer. Development here are trying to automate the software build process and I am wondering if there is any way for our build process, via a script or something, to pick the conditionalised topics from the master help system so that we do not have to generate a new help for every customer? Any help or advice would be great. Thanks.

Bill Albing describes what you need to know in an article on my site.
http://www.grainge.org/pages/authoring/command_line/command_line.htm
See - Preparing a Layout for Each Deliverable.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Help for printer set up on NW 3.12.

Similar Messages

Maybe you are looking for