Help for SCJP 5.0

Hi,
I am going to write SCJP 5.0 in october month . I had just started learning Java and I want to clear SCJP with good marks. So really I need all of the help that you guys can provide me. Either in the form of Java material required for the SCJP or the Question asked previously or the link to any useful site which can help in clearing this exam.
thanking all of you in advance.
GreatNite

The biggest reasons why programmers are treated like crap by a lot of companies (at least until you prove that you're good) is because these exams are so easy. Any idiot can read a book and pass them.
Don't take the exam unless you know Java. If you want to start somewhere, take the Java Associates exam. Then wait a while, and actually learn Java instead of just learning how to answer the questions, before taking the Java Programmer exam.

Similar Messages

Need help for SCJP 5.0

HI all,
I am preparing for SCJP 5.0, can any one tell me what is the new syllabus for SCJP 5.0?. and if you know the syllabus please publish the list of the syllabus topics on this forums, so that it will be a great help to all people who are preparing for SCJP 5.0

are you too lazy to look it up yourself? It's right there at the website where you register for the exam, you know...

Online resource for SCJP

Hi All
Is there any online resource from where I get the material for SCJP or
kind of online exam I can go thru for practice
plz let me know
Thanks
Niraj

Hi,
You may also wish to take a look at : http://www.javacertificate.com/
I found this site very useful when I was studying for the SCJP exam. It has practice questions which are also split into subjects allowing you to study a single area at a time. It also contains mock exams.
Hope this helps.
Ben.

Preparing for SCJP?

Hi
My name is Jon T and I am a programmer with a local company. I support and develop client�s applications. I use the following in daily process
Unix (HP-UX)
Oracle (Toad)
VB
ASP
etc ..
I have a basic foundation in Java and I am learning and preparing for Java Certificates.
Has anybody passed the test successfully who started from the beginning level?
Say, if I started today, is it possible to pass the test by May/June?

I agree if you are programmer and study an hour or 2(include reading and doing programming practice).
You need to read the book for SCJP. It is better if you can use the quiz and got a score close
to 90%.People recommend the test from whizlab and you have to pay fee.
The questions in the quiz is close to the exam in SCJP and it may help you familiar with the concept.
The book written by Kathy Sierra is good.
There are some free quizs on the internet. I myself have not bought the quiz from whizlab. I succeeded in SCJP 1.4 after one retry.

Need help for Java Certification

Hello friends,
I am preparing for SCJP 1.4. Those who have passed this exam pl help in prepration. Which books I should follow and some usefull sites which can help in preparing for the exam.
I will appreciate any kind of help.
Thanks,
Regards,
Nitin Goyal

Hello friends,
I am preparing for SCJP 1.4. Java certification, what do you need it for?I hear it's a new requirement to become a cab driver in Jakarta.

Creating search help for a field in AdHoc Query

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Hi
We have created an infoset based on LDB PCH.
(The infoset contains object type O only).
For the object-id field the users want search help when choosing this field for selection.
Using "start via selection screen" does not give a good solution.
Can anyone explain how I can create search help for fields in an infoset?
Regards
Kirsten

Need to restrict values in F4 help for Batch Characteristic

Hi,
I need to restrict values in F4 Help for a batch characteristic based on values entered for another characteristic. I could not find any BADI or Exit for this purpose. There is a BADI CACL_VALUE which is triggered after an entry is selected from dropdown list but nothing when we press F4. I thought of using Object Dependency but I need to write a programming logic for the requirement. Please let me know if there is any way to write program in Object Dependency or any other way for this requirement.
Regards,
Nikhil

Hi nikhil simha,
first of all, find out which search help is called.
[Hierarchy of the Search Help Call|http://help.sap.com/saphelp_nw70/helpdata/en/0b/32e9b798da11d295b800a0c929b3c3/frameset.htm]
may help you.
If you know the search help, you may enhance it, but first of all you should check the where-used-list and make sure that the search help shows the requested behavior only in the context where you want it to.
If it is your own program, you may be better off to create your own search help and define the triggering fields as search help interface input fields. Then you can use the values to filter results.
Regards
Clemens

Search Help for Vendor Feild not getting populated in the Screen Element

Hi Everyone,
In transaction Miro, I get a POP-UP for Invoicing Party i.e. Vendor and Users required a custom search help.
The Search help for Vendor(LIFNR) is KRED_C and i appended a Z search help under this.
Now that the search help exists and I can drill down the values too but when i select/choose any value, that value is not getting populated in Screen feild.
is there any validation I need to do for this.
Please suggest me... I checked SDN there are many things but i couldn't figure out wat i need to do and where I need to modify.
Regards,
Raj

Dear Hema,
Could you please tell me how many internal tables you are using to store the data for display.
I observerd that you have lt_stock and lt_mat2 declared in the part of the program
>DATA: lv_stock TYPE lty_stock.
>DATA: ltmat2 TYPE TABLE OF lty_mat.
you have displayed above, however you are also using ls_stock and lv_stock .
>IF p_ztotal = ' '. "line
>WRITE 18 ls_stock-matnr.
>WRITE 38 lv_stock-strgr.
>
>ELSEIF ztotal = 'S'.                             "subtotal
    >WRITE: 15 ls_stock-nrmit.
    >WRITE 32 lv_stock-dispo.
    >WRITE 43 lv_stock-fevor.
>ELSE.                                            "total
    >WRITE: 15 'TOTAL'(016), ls_stock-prgrp.
>
>ENDIF.
Are those for displaying some other information?
Also the problem of display you are facing can also be because there are no records to be displayed which satisfies the selection criteria.
Best Regards,
Rajesh.
Please reward points if found helpful.

Search help for SKAT-SAKNR OR SKAT-SAKNR is not working

Hi All,
I have created a Search Help for F4 in a dialog program for SKAT-SAKNR OR SKAT-SAKNR. While i click F4 on that field, it displays blank values.
Here is the module:
module HELP_FOR_SAPGL_ACC input.
CLEAR t_SAPGL.
SELECT SAKNR TXT20
    FROM SKAT
    INTO CORRESPONDING FIELDS OF TABLE t_SAPGL UP TO 1000 ROWS
    WHERE SPRAS = SY-LANGU.
   WHERE L_GL_ACC = v_FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE         = ' '
      RETFIELD               = 'SAKNR'
    PVALKEY                = ' '
     DYNPPROG               = PROGNAME
     DYNPNR                 = DYNNUM
     DYNPROFIELD            = 'SKA1-SKANR'
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
     VALUE_ORG              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
    TABLES
      VALUE_TAB              = t_SAPGL
    FIELD_TAB              =
    RETURN_TAB             =
    DYNPFLD_MAPPING        =
EXCEPTIONS
    PARAMETER_ERROR        = 1
    NO_VALUES_FOUND        = 2
    OTHERS                 = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule.
In the above code I am selecting 1000 rows from SKAT table and in the Search Help Popup it is also displaying 1000 rows but all are blank.
Please help me.
Regards,
Avaneet

Hi check my weblog on search help exit codeing..
https://wiki.sdn.sap.com/wiki/x/du0
\* Prepare for output
CALL FUNCTION 'F4UT_RESULTS_MAP'
TABLES
shlp_tab = shlp_tab
record_tab = record_tab
source_tab = lt_result
CHANGING
shlp = shlp
callcontrol = callcontrol
EXCEPTIONS
illegal_structure = 1
OTHERS = 2.
IF rc = 0.
callcontrol-step = 'DISP'.
ELSE.

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

Search help for date field in Editable ALV

Hello Friends,
I am using editable alv using 'reuse_* '.
I have used date as input field. While creating fieldcatlog also i have declared dat as a mkpf-budat.
But i am not getting serach help for date in output.
Is it possible with reuse or i have to go by object oriented ?

Hi,
Just pass the Edit option of the fieldcatalog for those specific fields...
fcat-edit = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = sy-cprog
      i_callback_pf_status_set = 'PF_STATUS_SET'
      i_callback_user_command = 'USER_COMMAND'    "<---- pass this
      i_callback_top_of_page   = 'TOP'
      is_layout                = it_layout
      it_fieldcat              = it_fcat
      i_default                = 'X'
      i_save                   = 'A'
      it_events                = it_event
    TABLES
      t_outtab                 = it_final
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
*&      Form USER_COMMAND
*       text
*      -->R_UCOMM      text
*      -->RS_SELFIELD text
FORM user_command USING r_ucomm LIKE sy-ucomm
                        rs_selfield TYPE slis_selfield.
CASE r_ucomm.
    WHEN '&DATA_SAVE'.                "<-------check this
      PERFORM save_data.
ENDCASE.
ENDFORM.                    "USER_COMMAND

How to create a F4 help for a report selection screen field

hi,
can any one guide me to create F4 help for a field in a selection screen in a report program,plz give me a sample code

hi,
Here are the following ways
1.with the help of match code objects we can create the F4 Functionality for Field.
Syntax is :
PARAMETERS: p_org LIKE t527x-orgeh MATCHCODE OBJECT zorg.
2. One more thing is we can do it with Search Help's also.
3. Even we can do it HELP Views also.
Help Views:
You have to create a help view if a view with outer join is needed as selection method of a search help
The selection method of a search help is either a table or a view. If you have to select data from several tables for the search help, you should generally use a database view as selection method. However, a database view always implements an inner join. If you need a view with outer join for the data selection, you have to use a help view as selection method.
All the tables included in a help view must be linked with foreign keys. Only foreign keys that have certain attributes can be used here. The first table to be inserted in the help view is called the primary table of the help view. The tables added to this primary table with foreign keys are called secondary tables.
The functionality of a help view has changed significantly between Release 3.0 and Release 4.0. In Release 3.0, a help view was automatically displayed for the input help (F4 help) for all the fields that were checked against the primary table of the help view. This is no longer the case in Release 4.0.
As of Release 4.0, you must explicitly create a search help that must be linked with the fields for which it is offered (see Linking Search Helps with Screen Fields ).
Existing help views are automatically migrated to search helps when you upgrade to a release higher than 4.0.
A help view implements an outer join, i.e. all the contents of the primary table of the help view are always displayed. You therefore should not formulate a selection condition for fields in one of the secondary tables of the help view. If records of these secondary tables cannot be read as a result of this selection condition, the contents of the corresponding fields of the secondary table are displayed with initial value.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 15, 2008 3:15 PM

Reg : F4 help for custom fields in ALV report

hi friends..
in my internal table i have fields including 1 custom field..
DATA : BEGIN OF i_final OCCURS 0,
pernr LIKE p0000-pernr,
begda LIKE p0000-begda,
plans LIKE ZPOSITION-plans, (custom)
werks LIKE pspar-werks,
end of i_final.
i want to display this i_final table in alv. for that i genetrate one fieldcatalog
PERFORM fcat USING:
                  'I_FINAL' 'PERNR' 'P0000' 'PERNR' '15' 'X' '',
                  'I_FINAL' 'BEGDA' 'P0000' 'BEGDA' '10' 'X' '',
                  'I_FINAL' 'PLANS' 'ZPOSITION' 'PLANS' '8' 'X' '',
                  'I_FINAL' 'WERKS' 'PSPAR' 'WERKS' '14' 'X' ''.
in custom table zposition, i maintain serch help for custom field "PLANS".
then i used reuse_alv_grid_display.. for all the std fields along wit custom fields
i got f4 all std fields but for my custom i am not getting the f4 help
how can i get the F$ help for this custom fields Zposition-plans..
plz give some idea

Hi
In that Ztable against the field
PLANS give the check table name as <b>T528B</b>
then it will automatically give the search help
or you can create your own search help(elementary) and add to that field
Reward if useful
regards
Anji

How to add a search help for a field in alv?

HI!Everyone ,
i want to add a search help created by myself for one field in alv,
and i want to use this function "HELP_VALUES_GET_WITH_TABLE".
can anyone help me ?
thanks!

HI,Vijay.
My code like this :
      PERFORM build_fcat.
      PERFORM build_objects.
      PERFORM layo_build.
      PERFORM set_drdn_table .
      CALL METHOD alv_grid->set_table_for_first_display
        EXPORTING
         i_structure_name = 'STU_S'
          is_layout        = s_layo
        CHANGING
          it_outtab        = itab_out
        it_fieldcatalog = i_fcat
        ."Period
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
for example, there is a field 'UNAME' IN Structure 'STU_S',
i want to add a search help for 'UNAME'.
the 'UNAME' is not users in SAP R/3 , i want to add some data by myself or from a table .

How to add search help for field in ALV object

Hello,
In a program, we use ALV object ( container) to create a liste like : field1, field2 .. but when display we do not have search help for this . Could you please help me how to add match code in this case for field 1 and field2, We use set_table_for_first_display
Thanks,

Hi,
when you define your field catalogue you can create data elements with search help in se11 and use them for field 1 and field 2.
But maybe it is enough to use data elements belonging to a domain with a value help and to set field F$AVAILABL in the field catalogue or to fill the name of the field CHECKTABLE.
Regards,
Klaus

Help for SCJP 5.0

Similar Messages

Maybe you are looking for