Help for writing a Map with out JDeveloper

Hi all,
Where can I find help documents or sample files so that I can write a custom mapping between an Oracle Object and Java Object. Yeh, this might be a simple task when we use JDeveloper , but just for writing this small piece of code I am not in a position to download JDeveloper of size 230MB and learn how to use it...
Plese give suggestions...
Thanks in advance...
Sateesh
null

Take a look at the JPublisher user's guide. You can also download JDeveloper in 20MB chunks if you can't download all 230MB at once.
Blaise

Similar Messages

Multi mapping with out BPM

HI ALL ,
I am trying to do multi mapping with out using BPM .I will get message from the sender and i need to send that to two different target system. I have defined the mapping in the IR . In ID i have created the configuration scenario and i have created the receiver determination .In receiver determination i have selected "EXTENDED" and when i select input help for mapping name it says "NO Object found". What else should i do get the mapping program here .
Regards,
Tarun.

Bhavesh,
I'm sorry but if he needs 2 different receivers, then it's not the case of using Enhanced Interface Determination.
sapuser,
if you scenario is asynchronous, then it's easily implemented.
But it won't be achieved with multimapping.
You'll have 2 receivers in receiver determination (normal RD, not enhanced). For each of those, you'll have to create a separate simple mapping (that will generate the message expected at each receiver system) and refer that mapping in the interface determination of each receiver.
For example, you have input_message containing data1 and data 2. You'll have 2 simple mappings (not a multimapping), 1 generating output_message_1 containing data1 and the other generating output_message_2 containing data2. Then refer those mappings in the proper interface determinations.
Regards,
Henrique.

Need help for writing extract program

hi
i need help for writing extract program to retriew data from legacy system.
i already developed bdc programs for me31k and me21.
my requirement is to write extract program s for those t.codes.
to retriew data from legacy system and stored in flat file.

i need help with a java program. it is a program that allows the user to enter a student's GPA, number of extracurricular activities, and number of service activities. The user can not enter a gpa above 4.0 or below 0. The user can not enter a negative number for the number of both activities. If the student meets the following criteria: 1) GPA of 3.8 or above and at least one extracurricular activity and one service activity, 2) GPA below 3.8 but at least 3.4 and a total of at least three extracurricular and service activities, 3) GPA below 3.4 but at least 3.0 and at least two extracurricular activities and three service activities, the message "Scholarship candidate" should display. If the student does not meet the criteria above, then the message"not a candidate" should display. Can you help me, please?
You haven't posted ANY 'java program' for us to help with.
The forum is NOT a coding service. It is to help you with YOUR code.
Post the code you have written and SHOW us (don't just tell us) how you compile it and execute it and the results you get. Then we can help you with any problems you are are having.
If you need help understanding just what the program should be doing you need to ask your instructor to clarify the assignment.

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extrem. How do I get Itunes to search for the music here with out trying to copy it to my laptops hard drive??

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.

How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507

Mapping with out bpm

hi...guys
how we will do 1:n multi mapping with out using bpm , pls explain..
with regards,
Prasad.

Hi Prasad
Go thru the forums given below.. which will discuss the same...
1:N mapping without using BPM
Re: 1:N mapping without using BPM --> IDOC to multiple files
Cheers..
Vasu
** Reward Points if found useful **

Help for downloading/installing PSE13 with window 8.1?

I get this message after intall attempts ..."Installer has detected that a machine restart may be pending. Its recommended that you quit the installer, restart your machine and try installing again," Lightroom, however, installed fine.

Thank you for responding. I got some advice from a Microsoft forum....it worked. Thanks again.
From: Pat Willener <[email protected]>
To: kathryn kramar <[email protected]>
Sent: Saturday, January 3, 2015 10:56 PM
Subject: help for downloading/installing PSE13 with window 8.1?
help for downloading/installing PSE13 with window 8.1?
created by Pat Willener in Downloading, Installing, Setting Up - View the full discussion
pwillener wrote: What is your operating system?
Sorry, you specified Windows 8.1 in the subject line. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7063274#7063274 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7063274#7063274 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

HT2534 I have apple ID with out Visa card but I can't use to Tunis store please help me to open Tunis with out Visa card

I need to download Facebook YouTube and Google search on my screen with all the programs I have apple ID but when I ask to load it say that this apple ID is not known by Tunis store so please I open my ID with out Visa card so as to use Tunis store with out Visa card because I am poor to have Visa card please help me soon!!! Thanks for your kind immediately support !!!!

If you follow, exactly, the instructions on the HT2534 page that you posted from when creating a new account (the instructions won't work with existing accounts) then you will get the 'none' option - I tried it earlier today on both my computer's iTunes and iPhone and I got 'none' for new accounts on both. If you don't use those instructions then credit card details will need to be entered before the account can be used in the store.
using a computer : https://discussions.apple.com/message/24321860
using an iPhone : https://discussions.apple.com/message/24700173
If you want to try using the same email address on a new account then you will need to replace it on that one first e.g. via the Store > View Account menu option on your computer's iTunes or http://appleid.apple.com

Can you use one PC for 2 different Ipods, with out erasing the others music from Itunes?

Can you use one PC for different Ipod touch's , with out erasing the other persons Itunes music?

Yes. See:
How to use multiple iPods, iPads, or iPhones with one computer

Please help to call oracle procedure with out paramter from shell script

Hi
I want to call a process with out parameter from shell script. I am calling process in shell script in below way
function Process_loads {
( echo 'set serveroutput on size 1000000 arraysize 1'
echo "set pagesize 0 term on verify off feedback off echo off"
echo "BEGIN"
echo " dbms_output.put_line('Before Calling The package'); "
echo " x ( '$1', '$2', '$2', '$4', '$5', '$error_code'); "
echo " dbms_output.put_line('After Calling The package'); "
echo "EXCEPTION "
echo " WHEN OTHERS THEN "
echo " dbms_output.put_line('BIN_LOAD_ERROR' || SQLERRM); "
echo " ROLLBACK;"
echo "END;"
echo "/" ) | sqlplus -s $USER/$PASSWORD@$SID
Here $error_code is out paramter. All varaibles passed in process are declared with export command.
When executing .sh it gives below error
"sh ERROR at line 3: ORA-06550: line 3, column 99: PLS-00363: expression '' cannot be used as an assignment target ORA-06550: line 3, column 3: PL/SQL: Statement ignored".
Please help to get rid from this error or please suggest how to call a oracle procedure with out paramter from unix shell script.
Thanks in advance

You can try this:
From sql*plus
SQL> ed
1 create or replace procedure my_proc(p_id in int, p_result out int)
2 as
3 begin
4 select 10 * p_id
5 into p_result
6 from dual;
7* end my_proc;
SQL> /
Procedure created.
SQL> set serveroutput on
SQL> declare
2 v_r int;
3 begin
4 my_proc(10,v_r);
5 dbms_output.put_line(v_r);
6 end;
7 /
100
PL/SQL procedure successfully completed.
from bash:
testproc.sh:
#!/bin/bash
(echo 'set serveroutput on';
echo 'declare';
echo 'v_r int;';
echo 'begin';
echo 'my_proc(10,v_r);';
echo 'dbms_output.put_line(v_r);'
echo 'end;';
echo '/';) | sqlplus -s u1/u1
Console:
oracle@mob-ubuntu:~$ chmod u+x testproc.sh
oracle@mob-ubuntu:~$ ./testproc.sh
100
PL/SQL procedure successfully completed.With kind regards
Krystian Zieja

F4 help for PO number field with SELECT OPTIONS

Hi all,
I have a field (PO no) using SELECT OPTIONS on my selection screen.I need F4 help for this field.How shud i declare it?
I have declared it as follows:
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
select-options sel_po for ZPO_LOI-zobject_id obligatory .
SELECTION-SCREEN END OF BLOCK b1.
ZPO_LOI is a table view with a z data element ZOBJECT_ID to which i have attached a search help which displays the required values for the PO field in the selection screen.But now the problem is i cant see the F4 icon for the field on the sel screen.
Please help.

Hi I have a sapmle code for this.
*&                AT SELECTION SCREEN ON VALUE REQUEST
*-- F4 help for IDOC numbers
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_docnum-low.
PERFORM value_request_status USING 'S_DOCNUM-LOW'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_docnum-high.
PERFORM value_request_status USING 'S_DOCNUM-HIGH'.
*&      Form value_request_status
      text
     -->fp_field dynpro field that gets the return value
FORM value_request_status USING fp_field TYPE dynfnam.
STATICS tl_values TYPE STANDARD TABLE OF tp_value.
IF tl_values IS INITIAL.
     SELECT docnum FROM edidc UP TO 500 ROWS INTO TABLE tl_values
          WHERE credat   IN s_credat
          AND   cretim   IN s_cretim.
     IF sy-subrc eq 0.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
         EXPORTING
          retfield        = 'DOCNUM'
          dynpprog        = syst-repid
          dynpnr          = syst-dynnr
          dynprofield     = fp_field
          value_org       = 'S'
         TABLES
          value_tab       = tl_values
         EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
         OTHERS          = 3.
         IF sy-subrc IS NOT INITIAL.
           MESSAGE i999(zz) WITH 'No values found'(004).
         ENDIF.
      ENDIF.
    ENDIF.
ENDFORM.                    " value_request_status
Regards,
Amit.

Help for writing XSLT

Hi,
I have an Source XML as follows.
<ROOTNODE>
<A>value</A>
value
</ROOTNODE>
<ROOTNODE>
<A>value</A>
value
</ROOTNODE>
<CHILD1>
<A>value</A>
value
</CHILD1>
NOW AFTER PERFORMING XSLT I NEED TO GET THE RESULT XML AS FOLLOWS.
<ROOTNODE>
<ROOTNODE>
 <A>value</A>
 value
</ROOTNODE>
<ROOTNODE>
 <A>value</A>
 value
</ROOTNODE>
</ROOTNODE>
<CHILD1>
<CHILD1>
 <A>value</A>
 value
</CHILD1>
</CHILD1>
The problem is i donot know what elements will be coming in the source xml and i cant hardcode the element names in the xslt.

hi,
Try with OOPs method. here is the sample code
data :lo_mxml type ref to cl_xml_document,
 m_document type ref to if_ixml_document,
 l_dom type ref to if_ixml_element,
 l_ele type ref to if_ixml_element,
 l_ele1 type ref to if_ixml_element,
 l_ele2 type ref to if_ixml_element,
 l_ele3 type ref to if_ixml_element,
 l_ele4 type ref to if_ixml_element,
 l_ele5 type ref to if_ixml_element,
 l_ele6 type ref to if_ixml_element,
 l_ele7 type ref to if_ixml_element,
 m_doctype type ref to if_ixml_document_type,
 g_ixml type ref to if_ixml,
 l_text type ref to if_ixml_text,
 ls_srctab1 type xstring,
 l_retcode type sysubrc. "#EC *.
 create object lo_mxml.
 perform header_xml.
 l_retcode = lo_mxml->create_with_dom( document =
 m_document ).
CALL METHOD LO_MXML->DISPLAY.
call method lo_mxml->render_2_xstring
 exporting
 pretty_print = 'X'
 importing
 retcode = l_retcode
 stream = l_string.
class cl_ixml definition load.
g_ixml = cl_ixml=>create( ).
m_document = g_ixml->create_document( ).
call method m_document->create_document_type
 exporting
 name = 'cXML'
 receiving
 rval = m_doctype.
call method m_document->set_document_type
 exporting
 document_type = m_doctype.
call method l_dom->set_attribute
 exporting
 name = 'payloadID'
 value = l_string
 receiving
 rval = l_retcode.
call method l_dom->set_attribute
 exporting
 name = 'timestamp'
 value = l_string
 receiving
 rval = l_retcode.
*___HEADER NODE (CHILD OF CXML NODE)
l_ele = m_document->create_element( name = 'Header' ).
l_retcode = l_dom->append_child( l_ele ).
*___FROM NODE (CHILD OF HEADER NODE)
l_ele1 = m_document->create_element( name = 'From' ).
l_retcode = l_ele->append_child( l_ele1 ).
l_ele2 = m_document->create_element( name
 = 'Credential' ).
l_retcode = l_ele1->append_child( l_ele2 ).
*____ATTRIBUTE FOR CREDENTIAL FROM NODE
move gc_cre_from to l_string.
call method l_ele2->set_attribute
 exporting
 name = 'domain'
 value = l_string
 receiving
 rval = l_retcode.
Hope this will help for you
Cheers,
Sasi

Solicit help for writing a scipts

Hi,
I made a form (with Adobe Acrobat Reader Pro 9), I would like to ameliorate the way to display the inputted data
I made a screen capture which summarise the modification wanted,
in (1) I would like to be able to select the short date and to diplay it like this: (dd/mm/yyyy)
in (2) I've tried a script but the field in the result column is always equal to 1 when nothing have been input in C1
var a = this.getField("Resultat");
h.value = 0;
var b = this.getField("ValeurB");
var c = this.getField("ValeurA");
a.value = (b.value - c.value) + 1;
in (3) I have to count always (with my fingers lol) the time spent between the date started and date finished, is it possible to write a script?
( I've never used Javascript before, it's my first experience)
thank you in advance for your help.

For the date difference calculation, you can do something like the following for the custom Calculate script of the field that shows the difference:
(function () {
    // Get the date field values
    var s1 = getField("d1").valueAsString;
    var s2 = getField("d2").valueAsString;
    // If both fields have an entry...
    if (s1 && s2) {
        // Convert the date strings to date objects
        var d1 = util.scand("dd/mm/yyyy", s1);
        var d2 = util.scand("dd/mm/yyyy", s2);
        // Calculate the difference in days
        var diff = Math.floor((d2 - d1) / 864e5);
        // Set this field to the difference
        event.value = diff;
    } else {
        // Clear this field of both dates are not entered
        event.value = "";
Where "d1" and "d2" are the names of your two date fields. This assumes you have a single field for each date formatted like dd/mm/yyyy. If you're using a separate drop down for the day, month, and year, you'd have to build the date string from the individual field values, but the rest of the script would be the same.

Error while trying to get F4 help for a field mapped to an info object

Hi,
I am getting the following exception while trying to attach a search help to a drop down list box.The field belongs to a table on the BW server which has an explicit search help attached to it.I am getting the following exception:
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_BSP_SERVICES_SHLP', was neither
caught nor passed along using a RAISING clause, in the procedure "_ONCREATE" "(METHOD)" . Since the caller of the procedure could not have expected this exception to occur, the running program was terminated. The reason for the exception is: The input help is not suitable.
As I am new to BW server I am unable to find the solution.Please help me out.
Regards
Tejaswini

Hi Craig,
I was actually not using the f4 help of the
IF_BSP_SERVICES class. Now I want to implement this as I have got many fields on my page. But I am getting the above mentioned error while doing this. The Code in OnInitialization() is:
data: dataref1 type ref to data.
data:wa_r8t_prog type ZR8T_S_API_PROG_H.
get reference of wa_r8t_prog-ZR8CPRGTY into dataref1.
try.
call method runtime->ddic_utils->get_simple_helpvalues
exporting
data_object_ref = dataref1
changing
helpvalue_tab = t_vallist.
catch cx_bsp_services.
endtry.
But I have a search help attached to 'ZR8T_S_API_PROG_H-ZR8CPRGTY' field
My 'ZR8T_S_API_PROG_H' structure definition is as follows:
.INCLUDE     ZR8T_REBATE_PROG          0     0     Rebate Program
ZR8CPRGID     /BIC/OIZR8CPRGID     CHAR     32     0     Rebate Program ID
COMP_CODE     /BI0/OICOMP_CODE     CHAR     4     0     Company Code
ZR8CPRGTY     /BIC/OIZR8CPRGTY     CHAR     5     0     Program type
Can I get f4 help from search help exits or do I have to use only value tables?
Regards
Tejaswini
Message was edited by: Tejaswini Das

Need help for connecting Ms Acces with java Swing in Mac OS

Hi all,
i need to connect to Ms Access in MAc os through my java swing program.
Is it possible for accessing Ms access through dsn in Mac OS.
If Possible which driver shall i use for Establishing Connection with MS Access in Mac OS.
Suggestion is needed urgently.
Can anybody help me out regarding this..
Thanks in advance.
Regards,
sreand

if I don't find a better solution I'll try your 2nd option but what do you mean by "combo" update?
My understanding is to simply insert the OS 10.5 installation CD, reinstall the OS and the just keep updating it via the OS SSoftware update panel and stop untill I see the scary Java 8 update. Is that what you meant?
While you can do it that way, the combo update picks up operating system updates through a collection of releases. When dealing with operating system upgrades, I've found using the combo updates to be more reliable than Software Update, as sometimes Software Update doesn't apply updates correctly, and weird things can happen. Doesn't happen often though, thankfully.
So the OS X 10.5.5 Combo update contains all updates between 10.5.0 and 10.5. The 10.5.8 combo update contains the updates from 10.5 thru 10.8. Here are the updates:
10.5 combo update: http://support.apple.com/kb/DL692
10.8 combo update: http://support.apple.com/kb/DL866
If you go down the combo path, repair permissions before and after doing each update. Then do Software Update for any other non-OS X updates, and don't apply the Java Update 8.

Help for a total newb with e65

Hi All,
Please help, I got the E65 and good posts about getting the wlan working.
But I got the navigator app with it, and I really dont get all this GPS stuff , with it working off satellite, but charging my mobile with data chrages, software that works with recievers and phones, some symbian.
Somebody explain it all in lamens terms please.
Cheers

Hi kiltedscot
Can I use this analogy, if you buy a TomTom car navigation unit the package includes the hardware (processor + GPS receiver) and navigation software for a fixed but known cost (there is no charge for receiving data from GPS satellite system owned by the US Government)
You have purchased the processor (E65), you need to purchase a Bluetooth GPS receiver to get positional data, the Symbian navigation software is provided free and if you download maps via your PC there is no need to incur GPRS data charges. If however you want a full talking navigation option, you do need to purchase a licence which in UK is just over £40 for 3 years.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Help for writing a Map with out JDeveloper

Similar Messages

Maybe you are looking for