(help) front audio panel cords-- sound card??

Dear all....
I have an ancient SB Li've! 24 bit SB 040.
Can anybody help me how to connect front audio header (casing) onto the card (ceati've proprietary connector)?
There are 0 pin connector on the card while the casing itself has only 7 pin.
Regards,

I was wondering that myself. The only thing I think you could possibly do is have both the onboard and the pci sound card enabled and use the onboard sound just for the headphones. I have no tried this yet as I do have the cables connected to the mobo but I have the onboard sound disabled.

Similar Messages

Front audio with PCI sound card?

Well, the front audio on my Antec P160W worked perfectly with the integrated sound, but I changed to my SoundBlaster Audigy Player because of the HORRIBLE audio quality. Now the front audio ports don't work. What do I need to do to make it work again? I'm not going back to the integrated.
At first I thought that I had to put the connectors for the front audio on the sound card, but the manual of it doesn't show any of those features.

I was wondering that myself. The only thing I think you could possibly do is have both the onboard and the pci sound card enabled and use the onboard sound just for the headphones. I have no tried this yet as I do have the cables connected to the mobo but I have the onboard sound disabled.

I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?

I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?
The firewire port reads the dj software and I can hear music playing through the sound card when I plug my headphones into it but there is no signal to the hardware (my dj mixer).
I have reset the firewire by turning off my mac book pro for a few hours and can see the sound card device in the fire wire section after clicking on the apple icon on the top left corner of my mac.
My dj mixer works on another mac computer with the same soundcard and different firewire cable.
Hope someone can help
Thanks
Wayne

kmiddlet88,
yes, it could be due to nearly anything listed in your kernel extensions, startup items, launch daemons, launch agents, or user items above. Please check all of your installed third-party software to make sure that the versions which are installed on your MacBook Pro are compatible with Mavericks; uninstall every software package which isn’t Mavericks-compatible. After you’ve done that, boot into Safe mode, and see if you still get the beach ball of doom there. If it doesn’t appear there, restart normally and see if it appears then.

Front audio panel not working on K9N Neo V3

A new problem with MSI K9N Neo V3 MB...
I just found out that Front audio panel is not working (no mic, no line out). I checked the cable 3 times. Seems to be OK. Front panel was working on a previous ASUS motherboard.
- All drivers according to vista are working fine.
- Back panel sound (eveything) is working fine.
- Sound panel says that front panel mic & line-out are not plugged in.
Is there a switch to turn this on? Or maybe some special driver?
Or it is just useless, and working on MB package advertisment only?

Quote from: Richard on 13-January-08, 06:50:13
P.S. Just a thought, I could go get a Ouija Board or Dart Board if you prefer. Might yield some answers.
You sure are funny. No doubt about that.
I do appreciate a good laugh, but in this case laughter won't solve my problem.
This little analogy with a car and a tire is just ridiculous. You know, tire is flat or it is not. Or is it maybe flat only on BMW cars?
I see no purpose in describing cables here, but if this is what would make you happy... It happens that I have few spare mintues, so here we go.
chapter 1. - The Case
I do not know what brand is my case. It's a cheap case with expensive Corsair 550W PSU. Very well cooled. I also don't know what is its name, so let us just call it George.
Here is George roaring on my desk;
Chapter 2. - Jimmy & Gina
This is an unknown brand, no name Front panel cable so let's just call it One eyed Jimmy;
This is local one tooth missing whore called Gina;
Chapter 3. - Encounter 1
Jimmy fills Gina just right. It's very tight but just right;
Chapter 4. - Berta, Gertruda and Mike
Dirty Twins Berta and Gertruda are ready to recieve some massive waves;
Big Mike is ready to give:
Chapter 5. - Encounter 2
It fits right again:
Chapter 6. - Oh NO!!!
It's not working on MSI AGAIN:

ALSA is not detecting my M-Audio Delta 1010 sound card (x86-64)

Hi
I've been searching Arch forums and googling for my problem but I can't find a suitable answer.
I installed my M-Audio Delta 1010 sound card on this PC but ALSA doesn't get it to work.
Chipset envy24 / ice1712
On dmesg I find:
$ dmesg | grep -i ice1712
[ 8.135832] snd_ice1712: probe of 0000:05:06.0 failed with error -5
However, it is listed on lsmod:
$ lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi 24529 4
snd_ice1712 59590 0
snd_cs8427 6970 1 snd_ice1712
snd_i2c 4107 2 snd_ice1712,snd_cs8427
snd_ice17xx_ak4xxx 2437 1 snd_ice1712
snd_ak4xxx_adda 8070 2 snd_ice1712,snd_ice17xx_ak4xxx
snd_hda_codec_realtek 61420 1
snd_ac97_codec 113344 1 snd_ice1712
snd_mpu401_uart 5980 1 snd_ice1712
snd_hda_intel 26181 5
snd_hda_codec 98034 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6429 1 snd_hda_codec
snd_rawmidi 18800 1 snd_mpu401_uart
snd_seq_device 5269 1 snd_rawmidi
snd_pcm 75735 5 snd_ice1712,snd_ac97_codec,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7218 2 snd_pcm,snd_hda_intel
snd_timer 18935 1 snd_pcm
snd 60189 25 snd_ice1712,snd_hda_codec_realtek,snd_ac97_codec,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_i2c,snd_pcm,snd_rawmidi,snd_hda_codec,snd_ak4xxx_adda,snd_hda_intel,snd_mpu401_uart,snd_seq_device,snd_cs8427
I followed some instruction and created a alsa-base.conf file with:
$ cat /etc/modprobe.d/alsa-base.conf
options snd slots=snd_ice1712,snd_hda_intel
options snd_ice1712 index=0
options snd_hda_intel index=1
aplay -l returns:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: SB [HDA ATI SB], device 0: ALC889 Analog [ALC889 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 1: ALC889 Digital [ALC889 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Seems card 0 is reserved for the m-audio card but is not being detected by ALSA
envy24control also exits with:
$ envy24control
No ICE1712 cards found
Finally, my /dev/snd
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 80 Dec 7 20:25 by-path
crw-rw----+ 1 root audio 116, 7 Dec 7 20:25 controlC1
crw-rw----+ 1 root audio 116, 16 Dec 7 20:25 controlC2
crw-rw----+ 1 root audio 116, 6 Dec 7 20:25 hwC1D0
crw-rw----+ 1 root audio 116, 15 Dec 7 20:25 hwC2D0
crw-rw----+ 1 root audio 116, 14 Dec 7 20:25 hwC2D1
crw-rw----+ 1 root audio 116, 13 Dec 7 20:25 hwC2D2
crw-rw----+ 1 root audio 116, 12 Dec 7 20:25 hwC2D3
crw-rw----+ 1 root audio 116, 5 Dec 7 20:26 pcmC1D0c
crw-rw----+ 1 root audio 116, 4 Dec 7 20:26 pcmC1D0p
crw-rw----+ 1 root audio 116, 3 Dec 7 20:26 pcmC1D1p
crw-rw----+ 1 root audio 116, 2 Dec 7 20:25 pcmC1D2c
crw-rw----+ 1 root audio 116, 11 Dec 7 20:27 pcmC2D3p
crw-rw----+ 1 root audio 116, 10 Dec 7 20:26 pcmC2D7p
crw-rw----+ 1 root audio 116, 9 Dec 7 20:26 pcmC2D8p
crw-rw----+ 1 root audio 116, 8 Dec 7 20:26 pcmC2D9p
crw-rw---- 1 root audio 116, 1 Dec 7 20:25 seq
crw-rw----+ 1 root audio 116, 33 Dec 7 20:25 timer
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 80 Dec 7 20:25 by-path
crw-rw----+ 1 root audio 116, 7 Dec 7 20:25 controlC1
crw-rw----+ 1 root audio 116, 16 Dec 7 20:25 controlC2
crw-rw----+ 1 root audio 116, 6 Dec 7 20:25 hwC1D0
crw-rw----+ 1 root audio 116, 15 Dec 7 20:25 hwC2D0
crw-rw----+ 1 root audio 116, 14 Dec 7 20:25 hwC2D1
crw-rw----+ 1 root audio 116, 13 Dec 7 20:25 hwC2D2
crw-rw----+ 1 root audio 116, 12 Dec 7 20:25 hwC2D3
crw-rw----+ 1 root audio 116, 5 Dec 7 20:26 pcmC1D0c
crw-rw----+ 1 root audio 116, 4 Dec 7 20:26 pcmC1D0p
crw-rw----+ 1 root audio 116, 3 Dec 7 20:26 pcmC1D1p
crw-rw----+ 1 root audio 116, 2 Dec 7 20:25 pcmC1D2c
crw-rw----+ 1 root audio 116, 11 Dec 7 20:27 pcmC2D3p
crw-rw----+ 1 root audio 116, 10 Dec 7 20:26 pcmC2D7p
crw-rw----+ 1 root audio 116, 9 Dec 7 20:26 pcmC2D8p
crw-rw----+ 1 root audio 116, 8 Dec 7 20:26 pcmC2D9p
crw-rw---- 1 root audio 116, 1 Dec 7 20:25 seq
crw-rw----+ 1 root audio 116, 33 Dec 7 20:25 timer
controlC0 and pcmC0 is not present!
So, what might be causing the probe error -5?
I really need to get this card working! :S
I have Arch up to date!
Hardware specs:
CPU: AMD FX6100
Board: Gigabyte (can't recall the model) with NVidia chipset
Thank you,

I have an m-audio delta 1010lt as well, it's a great card but it sits in my closet now because I "upgraded" to a motherboard that doesn't have legacy PCI slots. However, I'm pretty sure I remember the card working for me and being "plug and play" under arch with kernel 3.3 or newer. So some things I would consider:
Try checking IRQs, make sure nothing is overlapping.
Try using the LTS kernel, to see if it is kernel related, since ice1712 module should ship with almost any kernel => 2.6.26.
How many watts is the power supply? Sometimes insufficient wattage can result in drivers failing to load.
What other sound cards do you have installed? Have you tried blacklisting all of the other cards in your system using alsa-base.conf? This is a bit extreme, but might be a useful troubleshooting measure, as some people have had issues in the past with alsa indexing mutiple cards to the same slot number

CUPC - "Phone Error. Could not place call because you have no audio device or sound card."

Periodically throughout the day, CUPC will not make or receive calls, but instead presents a dialog box with the message "Phone Error. Could not place call because you have no audio device or sound card." See attachment.
Signing out of and back into CUPC resolves the issue temporarily.
I have version 8.6.2 installed and I'm using a USB headset.
Does anyone know what might be causing this?

Hi Steve,
I have users reporting this as well with Jabra GN 2000 headsets. They claim using a different headset resolves it which I'm waiting to confirm but I was wondering if you were able to figure this out.
Thanks
Erik

[SOLVED] Front audio panel still not working on K9N Neo V3

I already posted on this here: https://forum-en.msi.com/index.php?topic=113813.0.
I still didn't get front audio panel to work on MSI K9N Neo V3.
Even with my new case; Sharkoon Revenge, it is not working. It wasn't working on my previous noname case too. However, front audio panel on my previous case was working on several other MBs except on this MSI K9N.
Now, I'm using the latest Realtek HD audio driver. I think it's from February '08. Just as with the driver dowloaded by Vista via Windows Update, anything plugged in front audio panel isn't recognized. In this new version of Realtek driver I can't find this Disable front audio panel option so I can't tell if it is checked or not.
Once more, there is not much to do wrong while connecting. Case front audio panel cabel is the same as on all other cases I've ever seen/had. It's a cable with the same number and position of pins as in all other cases. It fits fine on MSI K9N Neo V3. Rear audio panel is working fine.
Any solution to this!?

Quote from: Jack the Newbie on 07-April-08, 03:25:15
From what I can see from the Sharkoon product page, the front panel connectors of your case are not compliant with the Intel HD Audio Pin Standard.
Do you have a manual for your case that includes Pin/wire definitions for the front audio connectors?
No. There was no manual in package. I never thought I will need one either.
Here is Sharkoon Rebel Pin Assigment; http://img176.imageshack.us/img176/9729/pinslk2.jpg
Quote from: Jack the Newbie on 07-April-08, 03:25:15
Have you tried disabling automatic front panel jack detection in the Realtek HD Audio configuration utility? If you don't know were to find that option, access the tab labeled "Audio I/O" and click on the tool icon.
Yes, I tried disabling it. Two tabs (front audio out and front mic) appeared but none of it works.
Quote from: HenryW on 07-April-08, 03:35:46
From something I read: You can also physically check the audio cable of the front panel audio solution. If there is a cable connected to Pin 4, you have an HD Audio module; if there is no cable to Pin 4, you have an AC97 module.
I don't really understand this. Could you please check this on Pin Assignment scan I uploaded above!?

Will FCP X and QT will output audio thru any sound card that the Mac recognizes?

I watch FCP X video on my Mac Pro video monitor.
I want to output the audio thru a sound card to my audio monitor controller. My new digital audio monitor controller connects USB to the Mac, and USB is not an output option with FCP X. So, I need another audio path.
I have previously used a Pro Tools HD Native card for sending FCP X audio out, and this works fine.
I assume that any other sound card that works in the Mac (i.e., compatible and selectible in Mac Pro Sound Preferences) would work with FCP X, but I am just checking to be sure this is right before I buy something.
I am aware of potential sync issues, so I would use only a low latency sound card. The Pro Tools card, for instance, had very low latency and worked fine.

OK, forget it.
I can just use the Mac Pro optical digital out. Doh.
Some days the brain just won't lock into gear.

Help!!! Installed Sound Card driver does not support Direct Sound input

I have just installed Premier Pro CS3 on a brand new PC. I am a new user and I am receiving a message "The installed sound card driver does not support direct sound input".
PC is a 3 GHZ Intel Duo
4 G RAM
2 x 500 G HD
Windows Home Vista Preminum
I am sure it is a simple fix and really appreciate any one given me the time or guidance to help get me started.
Many Thanks
Brendan

Thanks Harm for the prompt reply, nice one!
Sound Card is a "Realtek High Definition Audio"
Driver Version 6.0.1.5408
It was shipped with this Dell PC.
I checked the driver was up to date etc. So not sure what to do now.
Cheers

Audio Science ASI5111 Sound Card not working with Aud. 3 Multi-track

I am using an Audio Science ASI 5111 Sound Card. I also used Audi
tion 3.0.1 on Windows 7.
The program suddenly freezes when using the ASI driver (not Audition driver) in Multi-track mode.
At times I get the R6025 error

Audio Science is aware of the issue. It has been solved by going back to an older driver. 3.12.07

975x Front Audio panel troubles

I've run into something interesting.
I've not been able to get the front audio connectors on my Antec 900 case to work, although I would heard the front channel through the headjack, the microphone would never work.
The Realtek Audio I/O display would never seem to recognize that something was plugged in so, if I go into the Connector Settings dialog and disable front panel jack detection - then it displays that the headphones AND the microphone are always plugged in - even if they're removed.
Anyways, it works (sorta). I thought that it was a connector problem, but obviously not unless something is wired wrong in the harness from the case.
I'm running the latest official BIOS as well so, well, who knows where the bug is.
Has anyone else experienced this?
Thanks
hf

Quote from: Haques Funko on 11-November-06, 05:54:09
I've not been able to get the front audio connectors on my Antec 900 case to work, although I would heard the front channel through the headjack, the microphone would never work.
The Realtek Audio I/O display would never seem to recognize that something was plugged in so, if I go into the Connector Settings dialog and disable front panel jack detection - then it displays that the headphones AND the microphone are always plugged in - even if they're removed.
Do make sure that you have insert the audio connectors correctly on your motherboard. since your mobo is an intel based one, make sure that your front panel audio is compliant with the intel HD azalia specification.

Recording audio with both sound card and mic

how i can develop a program to record audio file from mic and sound card at the same time??
Muhammad Shoaib Software Engineer Shamim & Co. (Pepsi Cola Bottlers) Multan, Pakistan +923136140304

Here Recording Audio from a Microphone
https://msdn.microsoft.com/en-us/library/ff827802.aspx
chanmm
chanmm

P6N Sli Platinum front audio panel and CPU temp voltage issues

Hi All,
I got my P6N Sli Platinum yesterday, build up my computer without any major issues. However I have noticed that my audio front panel does not work. It could not detect my microphone when i plug it into front auido panel, it works fine for the rear auido panel though.
Another issues is I highly doubt the accuracy of CPU temp sensor. Msi 's software monitor reports my CPU temp is around 19-20 degree, I know that's too good to be true even I am using a water cooling system. Btw my cpu is E6600. Anyone else has the similar issues?
The third, I notice my CPU voltage is bouncing between 1.1 to 1.24 in CPU-z. And the multiplier is changing from 6 to 9, frequency is changing from 1.6g to 2.4g. I only see this in CPU-z. Msi 's own software reports CPU running at 2.4g though. Is this cpuz issue or something else?
Finally, any tips to max the overclock potential of this board? I have overclocked to 3.1g but there are some crashes. Going higher the board just won't boot up. I read a review on anandtech.com says 1.22 bios is good for oc. Where can i download that? I only found 1.1 bios on official site.
Any reply will be appreciated.
Cheers

Quote
Another issues is I highly doubt the accuracy of CPU temp sensor. Msi 's software monitor reports my CPU temp is around 19-20 degree, I know that's too good to be true even I am using a water cooling system. Btw my cpu is E6600. Anyone else has the similar issues?
C2D-CPUs have a digital internal sensor to monitor CPU Core temperatures. Have a look at those with Core Temp ( http://www.thecoolest.zerobrains.com/CoreTemp/ ). This Tool reads the temperature data directly from the register of your CPU. There is nothing wrong with the sensor. It is rather the MSI tool that does not read the data it provides correctly.
Quote
The third, I notice my CPU voltage is bouncing between 1.1 to 1.24 in CPU-z. And the multiplier is changing from 6 to 9, frequency is changing from 1.6g to 2.4g. I only see this in CPU-z. Msi 's own software reports CPU running at 2.4g though. Is this cpuz issue or something else?
There is no issue. What CPU-Z allows you to see there is the C1E-feature of your CPU at work. When there is nothing to do your processor will automatically reduce Core Voltages and frequency to save power and keep temperatures down. As soon as the work load increases the multiplier is set back to x9 and core voltages increase dynamically. It is meant to be a good thing.
I have overclocked my system a little and I like that the C1E feature is still working at this speed setting CPU frequency to 2GHz and core voltage to 1.144v when my system is idle.
If you have problems with this feature you can turn it off in BIOS. The option is labeled as "C1E Support" and might be hidden somewhere. You may be able to hit "F4" to unhide it.
The MSI utilities are not the best tools to monitor your system. CPU-Z, Core Temp, Everest, Speedfan, Memset, Rightmark Memory Analyzer for example do a far better job.

M-Audio Delta 192 Sound Card With Adobe Audition

I have a m-audio sound card and a mackie pro fx8 mixer, I am running windows7 64-bit. I was wondering how I need to set my preferences in Adobe Audition? When hitting record I am not recording my audio

Make sure that you have the M-Audio ASIO drivers installed. Then under Audition's Preferences/Audio Hardware select ASIO for Device Class and M-Audio ASIO for Device. Under Audio Channel Mapping select appropriate M-Audio inputs and outputs. If you are trying to record in the Mutitrack window make sure you select the correct input for each track. It will probably say Default Stereo Input but you can click on that and select any of the inputs that are available from the Delta 192.

Beats Audio vs external sound card

Ill be using my logitech Z623 Speaker System 2.1 THX certified speakers for gaming, movies etc with my laptop (HP DV7). Will the internal beats audio be up to scratch or should I use a dedicated USB sound card?

<font face="Calibri" size="2" color="#333333">jollen,
Welcome to Creative Forums. Soon enough you'll find that you're far from being alone. Enjoy!
Click here

(help) front audio panel cords-- sound card??

Similar Messages

Maybe you are looking for