HELP FUNCTION. 9-PRO

When I click on the help tab and choose HELP>Adobe Acrobat Pro HELP it does not open???

Not sure if it is the same issue, but I had this problem in Acrobat 7 Pro. If I remember right, make sure you have a PDF open, then try the Help menu. Or vice versa.

Similar Messages

Adobe Photoshop CS5.1 reinstalled because the Help functions gives an error message (7).

Hi,
When I tried to use the Help function in Adobe Prhotoshop CS5.1 a pop up message shows errorcode (7) advising to reinstall the product. So I did, but it did not work. What can I do more? Mind you, the Help function in Bridge is working as it should and both products are installed at the same time.
Regards,
Aad

Have you manually launched the Communiuty Help client and verified, if the PS help is actualyl listed there? If not, you might wanna add it to the list. Also take care to install al lthe pertinent updates for the help client...
Mylenium

Problems with Photoshop Elements 9 Help Function

I recently installed Photoshop Organizer and Elements 9. When I try to access any of the first six options in the help section of the menu at the top of the window I get an Adobe AIR error message stating that the installation of this application is damaged and to contact the publisher for assistance. This also occurs when I access the help button in one of the Photoshop Editor image processing functions. How do I repair the damaged help function of the software? Any help would be appreciated.
Thanks,
Rick Davis

Thanks for the quick reply. I had again the problem and thanks to yr explanation problem is solved : whack the spacebar
Bea

Does anyone could help with autoviewer-pro 1.3

Does anyone could help with autoviewer-pro 1.3! Thing is that I want to use png images without background in autoviewer, I've tried everything all kinds of picture formats, alphas, gone through google, autoviewer forum.... but no answer how to do it. When I attach a picture in autoviewer galleryit...after it is still with white background in autoviewer flash!
Can enyone helpe with avice.
Thanks in advance!

This post is from another topic but has to do with iPhone 4s unlock.
ArnettH_VZW
replied 11 hours ago
Good morning frank-bao,
In order for us to assist with unlocking your iPhone, there are some requirements that needs to be met. Please see below to verify that they are applicable to your situation.
Must be a Verizon Wireless customer. Verizon Wireless only unlock devices for Verizon Wireless customers.
The device being unlocked must be active on a Verizon Wireless line of service.
The line of service must be active at least 60 days.
The line of service must be in good standing for the past 60 days.
Customer may only have one 3G SIM Unlock per line every 10 months.
The customer's manufacturer's device warranty is not affected by a 3G SIM unlock as long as the customer remains with Verizon Wireless.
If you meet all of these requirement then we can certainly unlock your iPhone for you, assuming that it's not unlocked already. To get this process started or to inquire on if your device is unlock then please reach out to our Global support team at 800-711-8300. If you are already or still out of the country then we can be reached at 908-599-4899. Let me know if there is anything else that I can do to help.
Thank you...
ArnettH_VZW
Follow us on Twitter @vzwsupport

In your tutorial, having a problem linking the "Search the LabVIEW bookshelf" (on my D drive) help function with my Acrobat 4.0 reader(on my C drive)

When I was using the temp system demo vi, I selected Help>>Search the LabVIEW bookshelf. I then had a pop up window display tell me that the manual file "D:\National Instruments\LabVIEW 6.1\manuals\lvlib.pdf" could not be opened. I then did a search for this file and found that the pdf file is where it should be. I also checked to see that my Acrobat 4.0 reader files were in tact and they are. I was able to open up this file in Acrobat 4.0 but only by double clicking the name of the pdf file while it is highlighted in my find files function box (It also works if I go directly to the pdf file itself in its folder location a
nd double clicked on it). Nevertheless, for some reason when a vi is opened and when using the Help function in order to use "Search the LabVIEW bookshelf", it does not link to my Acrobat reader. Are my LabVIEW configuration settings wrong? I just recently had LabVIEW 6.1 installed. What do I need to do in order for LabVIEW to properly link up to my AcroRD32.exe file?

In your LabVIEW 6.1\help directory, please replace the lvmanual.vi with the attached VI and try to select Help>Search the LabVIEW Bookshelf again.
If it still does not work, please post a reply.
Thank you,
Kelly Holmes
LV Documentation
Kelly H
LabVIEW Documentation
National Instruments
Attachments:
lvmanual.vi ‏49 KB

How can I get help function?

My Mail help function is not working. After clicking on help, window appears, but stays empty. All other applications have properly working help function.

Try rebuilding your spotlight index.
1. Apple menu -> System Preferences -> Spotlight -> Privacy.
2. Add the hard drive to the panel by dragging it in.
3. Remove it by selecting it and hitting the minus sign in the bottom left corner of that panel.
4. Wait until when you look at the Spotlight menu it no longer says that it is indexing. The Spotlight menu is in the upper right corner of the screen, and has a blue circle with a white magnifying glass.

Error When Trying to use SAP Help Function

I receive the following Error while simply clicking on Help in SAP. I put a ticket in and out IT support was by SAP the following highly intelligent and helpful info/advice This is an actual quote!!!!:
“This option is not available if they are looking for training on how to use SAP, then need to request this from SAP support or an individual that is working with SAP in their departnemtn"
I was of the opinion that software comes with the help function in most cases (I say most because I could imagine someone making it a separate module but it would not go over well at all). I
I found a folder on the corporate shared drive called SAP_Help and took the following screen shots and there was a notedpad doc that listed every chm file and what it covered.
Next I opened SAP from Windows Server 2008 Applications Portal and so after I RDP'd into the server help works...
Anyone know why this is happening I went to school and got a degree in Accounting.

It seems you are using wrong client ID. Make sure your logon pad has right details. You should verify this with your basis team.
If the problem persists then try re-installing. But before you do that you can execute sapbexc.xla which is in the c:\program files\sap\bw. Type c:\ in cell c3 and click "start button". Any red flag means you have wrong version dll/ocx on your local drive, in that case you should reinstall with right patches.
if this solution helps u then pls assign points

I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. I anyone able to give me a hint how to handle it? Thank you ind advance Karl

I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. Is anyone able to give me a hint how to handle it?
Thank you in advance
arl

Hi Keith, sorry for my late reply.
Surely I am able to connect to the help function when Icontact the website
of AdobeLR5.The problem is as follows,
When I open LR5 on my computer and work with it and try to open the help
function in the software, I don't get it.
When I bought the CD I was naiv enough to believe that I get an independent
working software. I learned in the meantime, that the seller does not allow
to work with, without being connected to them.
I don't believe that I am paranoid, but I like to buy something and use it
without to inform the supplier that I do it. Otherwise I could have bought
the license fpr LR5 via internet.
Best regards
Karl
2015-01-02 13:42 GMT+01:00 kglad <[email protected]>:
I bought a cd with Lightroom 5. After installation and registration I
am not able to use 'help' function and I cannot update the software. I
anyone able to give me a hint how to handle it? Thank you ind advance Karl
kglad <https://forums.adobe.com/people/kglad?et=watches.email.outcome>
marked Keith_Reeder
<https://forums.adobe.com/people/Keith_Reeder?et=watches.email.outcome>'s
reply on I bought a cd with Lightroom 5. After installation and
registration I am not able to use 'help' function and I cannot update the
software. I anyone able to give me a hint how to handle it? Thank you ind
advance Karl
<https://forums.adobe.com/thread/1669640?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/7059196?et=watches.email.outcome#7059196>

Analytic Functions in Pro*C

Hi. Does anyone know if you can have analytic functions in Pro*C? I tried to compile this select statement and I get this error:
EXEC SQL DECLARE officer_cursor CURSOR FOR
SELECT opd,
nvl(rank1,0),
nvl(rank2,0),
nvl(rank3,0),
nvl(rank4,0)
FROM (SELECT aa.opd,
max(decode(rn,1,aa.tdrank,null)) rank1,
max(decode(rn,2,aa.tdrank,null)) rank2,
max(decode(rn,3,aa.tdrank,null)) rank3,
max(decode(rn,4,aa.tdrank,null)) rank4
FROM (SELECT o.workperson_id OPD, td.rank TDRANK,
ROW_NUMBER() OVER (PARTITION BY o.workperson_id ORDER BY td.rank) rn
FROM titleDOMAIN@REB_STEP_LINK TD,
OFFICER_TITLEDOMAIN@REB_STEP_LINK T_D,
OFFICER@REB_STEP_LINK O
WHERE COMPANY_ID = 835
AND TD.ID = T_D.TITLEDOMAIN_ID
AND O.ID = T_D.OFFICER_ID) aa
GROUP BY aa.opd ORDER BY aa.opd) zz
ORDER BY rank1, rank2, rank3, rank4;
END;
EXEC SQL OPEN officer_cursor;
Pro*C/C++: Release 8.1.7.1.0 - Production on Fri Aug 27 16:48:43 2004
(c) Copyright 2000 Oracle Corporation. All rights reserved.
System default option values taken from: ora_proc20:pcscfg.cfg
Syntax error at line 6779, column 28, file 10yr_sr_pub_extract.pc:
Error at line 6779, column 28 in file 10yr_sr_pub_extract.pc
ROW_NUMBER() OVER (PARTITION BY o.workperson_id ORDER BY td.rank) rn
...........................1
PCC-S-02201, Encountered the symbol "(" when expecting one of the following:
, into, from,
Error at line 0, column 0 in file 10yr_sr_pub_extract.pc
PCC-F-02102, Fatal error while doing C preprocessing
Thanks ahead of time.

Hello,
You don't say what version of Pro*C you are using, but I am guessing less than 11g. You may want to check out MetaLink Note:230115.1 (Precompiler Parsing SQL or PL/SQL Syntax Fails With PCC-02201 or PCB-00400). Essentially the precompiler does not "understand" some of the newer syntax. I believe the recommended option is to use dynamic sql as described in the Pro*C Programmer's Guide. There are a few bugs (notably 2471094 - PRECOMPILE FAILS WHEN USING OVER ANALYTIC CLAUSE) which are marked as fixed in version 11 - however I have not verified this.
Regards,
Mark

F4 / Help Functionality for input field in custom java iView

Hi,
As we see many F4 help on each input field in a transaction, how can we mimic the same functionality in a Custom Java iView. For example, ME23N, you can search a PO based on some criteria, when i create a new custom java iview using BAPI_PO_DISPLAY, how can provide that F4 or help functionality to the Purchase Order field.
Your help is really appreciated.
Thanks,
Vijay

Hi Vijay,
the F4 Help functionality is always of big concern when you're switching from a R/3 or ABAP-SAP GUI environment to a webfront end. First of all: the convinience you're used to of creating a seach help and adding it to your data fields is gone, i.e. the current development status in the portal/java/webdynpro implies that you have to do most of the work on your own. Simple value helps might not be a problem, but complex ones are (as the one you've described). Here is a link to a tutorial in Java-webdynpro, maybe it gives you an idea:
https://www.sdn.sap.com/sdn/developerareas/webdynpro.sdn?page=TutWD9_OVS.htm
Regards,
Ulli

My FCE Help function has disappeared

Does anyone know why my help function might have disappeared? I am using version 4.0.1 on my 21.5" new iMac. I have just bought the software too and made one software update. Since updating the software and clicking on Help, I am offered the user manual and various other links, but when I type in a help topic, anything at all, like "capturing video" for example, into the Search box, it tells me "No results found". Why would that be?

Try trashing the preferences like this:-
http://www.fcpbook.com/Misc1.html
If you prefer a free app that will do it automatically try this:-
http://www.digitalrebellion.com/pref_man.htm

How to handle help function type in a dynpro

Hello
I've made a button with the functiontype H ( Help Function) and now I'd like to react on this button.
But in the POV AND POH I can't call a module, because for this I need an input-/outputfield.
(FIELD "FIELDNAME" MODULE "MODULENAME").
My question is, how can I react on this functiontype / "HelpButton" ?
Thx in advance
Christian

There are two ways:
First************
Process after input.
module user_command.
Code inside module user_command:
IF SY-UCOMM = 'H'      "Function code for help button
*fetch all the list and store into an internal table.
* Call another screen to display the internal table.
endif.
Second*****************
Create an input field on the screen and make it invisible.
Process after input.
module user_command.
Code inside module user_command:
IF SY-UCOMM = 'H'      "Function code for help button
*fetch all the list and store into an internal table.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
*         DDIC_STRUCTURE         = ' '
      retfield               = 'name of field of internal table which is to be returned to invisible dynpro field'
*         PVALKEY                = ' '
     dynpprog               = 'program name'
     dynpnr                 = 'dynpro number'
     dynprofield            = 'name of invisible dynpro field'
*    STEPL                  = 0
*    WINDOW_TITLE           =
*    VALUE                  = ' '
    value_org              = 'S'
*   MULTIPLE_CHOICE        = ' '
*   DISPLAY                = ' '
*   CALLBACK_PROGRAM       = ' '
*   CALLBACK_FORM          = ' '
    TABLES
      value_tab              = Internal table containing list to be displayed
*     FIELD_TAB          =
*     RETURN_TAB             =
*      dynpfld_mapping        =
   EXCEPTIONS
     parameter_error        = 1
     no_values_found        = 2
     OTHERS                 = 3
endif.

Now i have tryied everything i need help getting premier pro trial real help pls!

now i have tryied everything i need help getting premier pro trial real help pls!

Hi,
Are you facing issues installing Premiere pro trial?
Please mention your operating system.
Error(If you're getting any)
Thank you,
Mohd Naseem

Photoshop CS5 "Help" function not working - Adobe Air error message?

Installed Photoshop CS5, and thought everything was working okay, but when I click on Photoshop Help, I get the error message "Adobe Air - This installation of this application is damaged. Try re-installing......" I have re-installed first Adobe Air, same problem and then uninstalled and re-installed Photoshop CS5, but the problem remains. When I first tried to use the Help function it tried to update something and for some reason this failed. I'm wondering if others have seen the same problem and know of a solution? Thanks, David.

Hello: there may be a configuration issue going on here. I have escalated this issue to our Help app engineering team. In the meanwhile, please try the following:
Uninstall the Adobe Help application: go to your Application folder > Adobe > Adobe Help (drag it to the Trash)
Delete the following directory:
USER NAME (home) > Library > Preferences > chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.
Empty the Trash
Manually update the application via this link: http://www.adobe.com/support/chc/
Select "Photoshop" in Step 1 and then click the Install badge in Step 2. Make sure to select "Open" (and not Save) in the installation dialog box to fully update the app.
Note: The previous instructions did not include deleting the old application or its preference file. This will help ensure that it is thoroughly updated.

Behaviors without helper functions

Hi all, I'm trying to create a behavior that doesn't require
a behavior
function, is this possible using the behaviors API?
Dreamweaver requires a behaviorFunction() function in
behaviors, and
returnig an empty string results in a message "The Action
will not be
applied".
Is it possible to insert behaviors without a
behaviorfunction?
Sure I can create proxy functions that in turn call the
actual command (eg
alert()) but this seems a lot of overhead to put into the
document.
Joris

"E Michael Brandt" <[email protected]> wrote
in message
news:fb3rqv$qv3$[email protected]..
>
> If you read the Extension help you'll see that certain
functions are
> indeed required by each type of Extension, whether
Behavior, Command, or
> Object. And certain methods are disallowed by each type
as well.
>
Yes i have the manual in front of me, i'm building a behavior
to call
commands in the AIR runtime, the air object is just available
in the
document when the AIRAliases.js is included, it doesn't need
a "helper"
function.
So what i'm doing now is inserting a proxy function to call
the original
function, return the name of the proxy function from
behaviorFunction and
wrap the call, that just seems like a lot of overhead.
Joris
function AIR_exec(cmdName) { //v1.0
if(typeof air != 'Object'){
alert('ERROR: AIR object not loaded, please include
AIRAliases.js');
} else {
var cmd = 'air.'+cmdName+'(';
for(var i=1; i<arguments.length; i++){
cmd += (i==1) ? arguments
: ','+arguments;
cmd += ')'
eval(cmd);
//Return the name of the function that we want to be inserted
into the
user's document.
function behaviorFunction(){
return "AIR_exec";
//Returns the actual function call string that will be
inserted into the
event handler
function applyBehavior() {
addAIRAliases();
return
"AIR_exec('trace',"+document.theForm.traceMessage.value+")";

HELP FUNCTION. 9-PRO

Similar Messages

Maybe you are looking for