Help G3 wireless problem

I am very new to using apple/mac computers...Please Help
I have a G3 Blue and White (OS 10.2.8) that I am trying to connect to my home wireless network. G3 has the airport card and it is installed and recognized by the system. My network appears on the list of local area networks that I can attach.
The "base" station consist of PC (XP) with a Netgear Wirelss Router. If I disable my Security settings under the Netgear admin site I am able to get an internet connection for the G3.
However, I am not interested in leaving my network open but when I add WEP (Wired Equivalent Privacy) or WPA-PSK (Wi-Fi Protected Access Pre-Shared Key) I am not able to get connected.
Using WEP I set a passphrase and generate the keys but I'm not able to see where on the G3 to do likewise. It only asks for a password.
If I use WPA-PSK, I set a passphrase but it is not recognized when I enter the passphrase as the password on the G3.
Is it possible to have a secure wireless network with this setup?
I would appreciate any input, thanks.

Hi, and welcome to Apple Discussions.
I suggest that you post your question in the _Power Macintosh G3 (Blue and White) Usage Forum_. Someone there will have a better idea of what you can do.
You have found your way into one of the iBook forums here, so the hardware is very different.
Good luck.

Similar Messages

  • Help! - Wireless Problem

    Hi,
    I was on a train earlier and connected to a wireless network called "EMC Wireless Internal" - showed connected but couldn't access net etc. Now have left train and still shows connected to this network! The airport symbol changes to one I haven't seen before. Can't see any other networks. Also tried using my Windows XP on Boot Camp partition with same results. Please help.
    Thanks

    two things I can think of that might work:
    1. go to setting / Wi-Fi Click on the > arrow of the connected network, then click forget this Network. That should release it.
    2. go to settings / WiFi , turn off WiFi wait a few minutes then turn it back on. That also should release the network.

  • U300s wireless problems (multiple)

    I have had my U300s just over a year now and am suddenly encountering wireless problems.  Like others on this board with different IdeaPads (esp. U310), I experience a dramatic drop in speed when I move from the first floor (where the router is) to the second.  It sometimes disconnects, says I have no internet access, etc.  The second, and more mysterious problem is very, very recent: I have decent internet access -- even when upstairs on the second floor -- until the moment I switch over to an external monitor and close the laptop lid.  Then: nothing.  All other functions work fine, the internet simply cuts out.  This is VERY odd, as up until one month ago in a different apartment (and for a good 8 months), I worked everyday with my laptop connected to an external monitor, lid closed, with no real problems (only the occassionaly slow internet).
    Just for the record: I originally thought the wireless cutting out might have to do with my wireless mouse (previously, I had a corded).  So I hunted down an old, corded mouse and...makes no difference.  Clearly not the source of the problem.
    I know some people have had problems with their wireless after installing Windows8.  I am still using the original Windows7.
    Thanks for any help!!

    Sorry, no. I have been overwhelmed and distracted by a new problem: my keyboard's space bar, enter key, and back space key are not working. It started off as an occassional glitch last week (when I shut down and turned the pc back on, the problems were usually also gone) but now I can press as hard or frequently as I am able and nothing happens.  Or if it does, it is a total fluke, not to happen again any time soon. And it makes no difference if I put it into sleep or shut it off and start it back up. I don't know what to do! Is this a hardware problem or...?

  • Wireless Problem in windows 7 intel wifi link 5100agn

    i bought a dv7 1270us laptop in january. everything was fine until the last 3 months i started having small problems in vista. it would take 10+ minutes to connect and the speed would go up and down. then i installed windows 7 and am either having problems with the card or driver but ive tried every driver i can find and nithing has worked.. the wireless drops randonly. when it drops it doesnt lose connection the signal drops all the way down to one bar and i get maybe 10Kbps of bandwith well it takes 2 minutes to load a page of this forum atleast. When it drops it also only drops for maybe 5-10 minutes or else it stays like that until i restart but resarting always fixes it tempoparily for 10 minutes or so. toaday i tried to disconnect and reconnect to my network. as soon as i cicked connect i got a blue screen it pointed torwards netw5v64.sys i have tried re installing the drivers multiple times and the problem isnt resolved. i have sent the laptop in twice in the last 2 months one for the blue ray drive and wireless problems i am having now. they sent it back with a new blue ray drive and a new antenna for my wireless saying the card was fina it was a driver and maybe a new antenna would help with connectivity. well they were wrong. i got it back and it started overheating to 90+ degrees celcius and wireless problems were still there even though they re-imaged the hard drive so all drivers should be perfect.so i sent it back again. now i just got it back and they cleaned the heatsink and completely ignored my wireless problems. the sheet that states the repairs that were done has a circle aroubd cleaned heatsink/fan and thats it n comments or anything. then to make the icing on the cake there is a 3 inch long fairly deep scrath on my laptop i take verygood care of all of my laptops so that i can sell them used for more than a scratched up one. i am very disappointed in hp and almost dont want to send it back and loose it for another week just to get it back without anything being done again i am almost certain they would re0image the hard drive again and send it back since they didnt even do that the second time. okay back on topic is there anything anyone has heard t fix this so i dont have to send it in again. any help is appreciated

    Intel! They make processors and a variety of motherboard hardware, but they seem to have a devil of a time making decent drivers. Particularly with their wireless NICs. Lately I’ve noticed a number of errors springing from the Intel WiFi Link 5100/5300 AGN family of wireless adapters. They seem to cause random bluescreen errors on Windows Vista systems. Fortnuately, there is a viable workaround:
    -Right click on Computer and select Manage.
    -After Computer Management opens up, go to Device Manager.
    -In Device Manager, expand the Network Adapters category.
    -Right-click on “Intel (R) WiFi Link 5100 AGN” and select Properties.
    -In Properties, go to the Power Management tab.
    -Under the Power Management tab, make sure that “Allow the computer to turn off this device to save power” is unchecked.
    Apparently, the driver for the WiFi Link 5100 can’t properly handle the device going to sleep, and pulls down the whole system. Hopefully Intel will fix this in future driver updates. Until then, this workaround will have to do.

  • Home Hub Wireless Problems

    Hi,
    I am on BT infinity and have Home Hub 3 (I think) with software version running is 4.7.5.1.83.8.94.1.11 (Type A).
    Normally I get very good wireless connection / speed, however there seems to issue with the automatic (smart wireless). It seems to switch to channel 6 then after sometime links drops and I get very slow or no Internet connection. When the link drops I get message on the laptop that there is limited wireless connectivity.
    I have to log in to Hub with Ethernet cable to change to different channel manually. I have no issue finding the good working channel manually, but hub keep switching back to automatic (smart wireless) and prefers channel 6, which after some time start to play up.
    Does anyone have any suggestion / solution to this annoying issue.
    Thank You
    Solved!
    Go to Solution.

    The answer is to select a channel manually, and disable smart wireless, as it gives people a lot of problems.
    There is some extra help with wireless on this link.
    Wireless connection problems
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • T42P 2374-Q39 Wireless Problems - Unable to determine exactly what driver I need

    T42P 2374-Q39 Wireless Problems - I've tried every driver and followed instructions for install many times. I was able to successfully install it in the past but can't remember with driver/version I used. Using WinXP SP2 - just installed. Please help! Thanks!
    Message Edited by frustrated2009 on 06-05-2009 08:48 PM
    Message Edited by frustrated2009 on 06-05-2009 08:59 PM

    Bookmark this page, its the entry page to the Lenovo support pages for your 2374-Q39. In it you see you have the Intel 2200bg wireless card so this is the correct driver to use.
    T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

  • VIsta Wireless Problems with New FIOS Install July 2009

    I recently had FIOS telephone, INternet andTV intstalled.  All was well except on my Vitsa laptop I cannot maintain a steady wireless conneciton with the Actiontec MI424WR router.  I hit the Web and found out that many have had this complaint and that there is an ongoing conversation about whose fault the problem is.  I had flawless service under TIme- Warner with my Vista Wireless so I did not intially assign blame to Vista or my laptop.  I do recall the Verizon installer mentinoed "problems with Vista" but he did not elaborate.  I spent all day yesterday researching and attempting every fix suggested on numerous web sites.  All failed except one.  
    Essentially, I now use my LinkSys Router in front of the Actiontec MI424WR router.  I found the instructions to do this on numerous web sites after researching FIOS Vista wireless problems.  The LinkSys router handles only wireless.  Now my Vista laptop never drops a connection.  I still have acess to FIOS TV guide and on demand so the fix did not interfere with FIOS router TV functions.
    THe bottom line is that it would appear that there is a problem with the Actiontec MI424WR router and Vista.  Fortunately for me I had the Linksys ROuter available.  Verizon - you need to look into this.  Based on what I have experienced I cannot recommend FIOS internet for those with VIsta computers until tjhis is addressed.
    From what I have researched, Verizon claims it is a Vista problem.  Beta testors of WIndows 7 have reported the same issues with FIOS and Actiontec MI424WR router.  My experience and that of others who have devised the fix I employed would clearly suggest that Verizon needs to look into this and get this problem solved.
    Steve B.

    My neighbor had a similar issue. When trying to figure it out we found out that there is a problem with some of the Intel drivers when connecting to some g class routers. We upgraded the wireless drivers on the computer and bingo the problem went away. This was on an Intel-R pro  wireless.  If you have Intel-R pro wireless on your computer, try upgrading to the current driver set and see if that helps you too. 
    http://downloadcenter.intel.com/Default.aspx?lang=eng    and then input the device number to search for a driver
    ====================================================================================
    Error exists between keyboard and chair.

  • Slow Internet/ Wireless Problems

    I have had a black macbook for two months now, and have been having wireless problems. I put it next to my powerbook aluminum and the macbook shows a flashing wireless network (going in and out really quickly). Sometimes I also see the network but can't go to any websites, must either sleep it or renew DHCP. The internet has also been much slower than the aluminum. Any suggestions? SImilar problems?

    hey there,
    i'm going to copy and paste here as i've tried to resolve this a few different times with no joy!
    when websurfing,it can take up a minute and a half for a page to open...i use wirless in my house so that could be the issue..when i brought it into uni it was pretty much instantaneous,obviously there are alot of hot spots there,so that made sense...but i tried it in my brothers house(wireless)i put it right beside his 3 year old laptop(siemens fujitsu)both computers about 15 metres away from the router...my brothers worked at top speed...my brand new MB went at a snails pace:(....is this normal???i have tried it with safari and mozilla same result,i'm careful to empty cache pretty much after every use...i've tried it whilst making sure nothing else was running and still its super slow!!is ther anything i can do/buy/download that may help me increase my speed..i do alot of online research so fast internet is really important for me...
    pleasse help!

  • HP Pavilion G6-2320TX Wireless Problem

    Hello Guys, My Father's Laptop which is a HP Pavilion G6-2320TX is getting Wireless Problem. The problem is that the F12 Key Light which is probably the wireless indocating light stays orange and doesn't turn off even after pressing it 1000Times. And the Wi-Fi is not working. The Device Manager says that my Wi-Fi is all right and no driver issue but i can't connect to the internet. When i clicked Troubleshoot Problems it says that wireless capability is turned off. I formatted my PC and installed Windows 7 but no luck. Even the HP Support Site says that there is no driver available for my pc.
    I have tried reseting the BIOS but no luck. Thins Laptop is out of warranty no I'm out of luck.
    Please help me cause I can't connect to the internet and after formating I can't find right drivers for my Ethernet.
    Please Help......Thanks.
    My PC:-
    OS- Windows 7 64-Bit
    CPU- Intel Core i5 3230M 2.60GHz
    GPU- AMD Mobility Radeon 7670M 1GB DDR3
    RAM- 8GB DDR3 1600MHz (Expanded)
    Wi-Fi- Ralink RT3290 802.11

    Hi:
    You should be able to use all of the W7 x64 drivers and software from the g6t-2000 except the BIOS and firmware files.
    http://h22207.www2.hp.com/us-en/drivers/selfservice/hp-pavilion-g6-2000-notebook-pc-series/5226244/m...
    For the graphics, you only install the AMD graphics driver which should install the drivers for both the Intel and AMD switchable graphics.
    I believe that model has a Ralink wireless card, so try the Ralink wireless card driver first.
    If that wireless driver works, use this bluetooth driver.  The one on the g6t-2000 is for the older version bluetooth radio that model had.
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_113004_1&swEnvOid=405...

  • G500s wireless problem

    I recently recieved my new g500S this last week. I was finally able to get it out of the box and up and running yesterday. To my surprise, I was unable to get my wireless to detect any wireless access points. Several hours were spent troubleshooting including several driver reinstalls, wireless router setting changes, and internet searchs. All of which were unsuccessful.
    This morning, I attempted one last attempt to troubleshoot the problem. I had found through a search that some lenovo laptops had been shipped with the wireless wiring reversed. When I opened the case, I found not one, but two immediate problems. First, I noticed that the wire sheath on one of the wires(the black wire) connecting to the wireless had been rubbed bare. Second, the two wires(black and white) had been reversed on their connection to the card. After that was fixed, I powered up the laptop and found that the wireless was able to detect all nearby access points and connect to my router without difficulty.
    I have been pleased with the quality of Lenovo in the past but this has been the latest purchase in several years from Lenovo and I am very disappointed. This lack of quality control is unacceptable and I will reconsider any further personal purchases or recommendations to my customers. Hopefully this will also help anyone that has been having wireless problems that have not found a solution.  Thank you.

    http://www.apple.com/support/downloads/airportupdate2006002.html
    there is an update... I haven't had any problems with airport but i still updated....

  • Sleep function = wireless problem?

    I have an Intel iMac 2.4 GHz/OS 10.5.2 (the earlier version of Leopard came pre-installed) and a lynksis router.
    Like many others I experienced an unstable wireless connection from day 1 with this computer. The other two Macs in the house, both running Tiger had and have no such problem.
    Changing the router channel from 6 to 3 seemed to help somewhat, but the problem persisted.
    I noticed it was worse when the computer had just been wakened from sleep. That is, the wireless signal would start strong then quickly fade away. I found that putting the computer back to sleep, then immediately waking it up would restore the signal, but I often had to do this a dozen times during a session of an hour or so.
    Since there seemed to be some connection between the sleep function and the wireless connectivity I decided to experiment. I went to System Preferences/Energy Saver and set the sleep function to Never. The screen is still set to black out after fifteen minutes. So now the computer is awake all the time, only the screen darkens after some inactivity.
    For three days now the wireless signal has been extremely robust - no fading out whatsoever and the bars have remained at full strength. This certainly doesn't explain the cause of the problem, but it does seem to be an effective work-around, at least so far.
    Has anyone else had a similar experience? And can anyone explain why the sleep function would affect wireless connectivity?

    That a graphics update would fix the sleep function (not to mention the associated wireless issues) seemed odd to me too. I'm just reporting what the Apple tech said. I do have the impression that if they really can't solve your problem their next objective is to get the caller off the line as pleasantly as possible. That may possibly be the case here.
    I would certainly be interested to know if anyone else has a similar problem. The two necessary conditions seem to be:
    1. Sleep function (as set from System Preferences) unreliable, e.g. doesn't always put the computer to sleep, sometimes invokes such a deep sleep that the computer must be unplugged to restart, sometimes wakes up by itself;and
    2. Wireless signal slows to a crawl shortly after awakening from sleep (and in my case, remains unstable, requiring toggling sleep on/off or airport card on/off to resume strong signal.)
    As long as I have the sleep function set to Never the wireless problem disappears. It's been almost two weeks now, so I'm pretty sure there's some link between the two conditions. After the last software update from Apple a couple of days ago I reset the sleep function back to 15 minutes and the wireless fade immediately started up again. Reset it to Never, and, voila!, no problem since.
    I hope anyone else who has both sleep and wireless problems will try this. So far it's the first reliable clue I've found regarding the issue of unstable wireless.

  • Wireless problem GT60 0ND

    After the keybroad and recovery system.... Finally to the boss wireless problem.
    My GT60 0ND is WIN8 64bit, 8gb ram, killer e2200 lan   RF; 802.11b/g/n
    I sure my router and internet provider are all good.
    the laptop just finish reinstall the system from MSI center.
    the problem occurred month ago, but sometime the limit internet speed will disappear,
    I don"t know why ......
    when the laptop connect to the router by cable, the speed is gd.
    but it is worse or nearly cannot connect to the internet when use the wireless even I just in front of the router.
    the usual speed of the internet is around 60~112mb. however, now is 13mb (actual speed is less than 1mb or >56K).
    just want to know what I can do? is it related to Norton antivirus? or Killer network lan?
    the killer manager is 6.1.0.437.
    please help thank you very much......

    thank you for your reply, where I can find the new drive to upgrade?
    moreover, I will go to other place to test the wireless.
    It always give a feeling that the laptop wireless is limited!!
    when I first connected to the router, it show limited until I turn off the router and on again.
    but the speed is no different. less than 56K mean even you load a normal website, you have to wait 1 min.
    sad sad sad.

  • GE70 0ND win7 wireless problems... again.

    Hey there.
    I'm the one of many who decided to perform a downgrade on a GE70 0ND laptop. However, I've encountered a problem with wi-fi not working at all. Firstly I couldn't even switch it on, but after flashing my EC to win7, S-bar is working properly (a blue indicator now lights when I press the wi-fi button), though I'm not able to find any wireless networks.
    My BIOS version is E1756IMS.514
    EC version is 1756EMS1 4.04
    I downloaded the recent Intel n135 drivers, started the diagnostics, on the first step (hardware test) it says: "Wireless hardware is not bound to transport driver."
    Any suggestions?
    Thanks in advance.

    Try resetting EC: How to reset the EC (Embedded Controller)
    If no help remove wireless driver in safemode using >>Driver Fusion<<. After reboot install latest driver.

  • T40 2374-PU3 Wireless Problems

    T40 2374-PU3 Wireless Problems - I've tried every driver and followed instructions for install many times.  I was able to successfully install it in the past (about a year ago) but can't remember with driver/version I used.  Using WinXP SP2 - just installed.
    Please help!
    Thanks!
    Solved!
    Go to Solution.

    Welcome to the forum!
    Here's your wireless driver:
     http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-42683
    After downloading it, make sure to extract it as per instructions on the download page.
    Hope this helps.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem.

    My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem. Iphone4s, 32gigs, IOS 7.1.2
    I don't know why it stopped working but it happened a month or two ago but the option on this phone that's usually all the way to the left when you select your device but now its not and I don't know what caused it. ive already tried troubleshooting my problem but have found no help.

    Hello Salmomma,
    Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac.  I recommend following the steps in the tutorial below for an issue like this:
    iPhone not appearing in iTunes
    http://www.apple.com/support/iphone/assistant/itunes/
    Additionally, you can delete music directly from the iPhone by swiping the song:
    Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
    iPhone User Guide
    http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • I still cant use my BB Passport because of that anti theft feature

    I am so depressed now. I cant seem to get over the fact that this device is useless after spending $600 on it...please help!!!!! i need it for my work...I gave my old BB 10 to my bro already... I love the device...I have used it for 3 days only...the

  • Cannot unlock my Iphone 4 using my apple ID

    hey, I want to ask about my iphone 4 cannot be unlock because of incorrect apple id. I had change my apple id and still my iphone 4 cannot be unlock. besides I sign in using my old apple id also, but still cannot. please someone help me.

  • SCOM 2012R2 Network Vicinity View doesn't show agent managed PCs

    Hello, Network Vicinity View in my SCOM only shows other network devices+management server, but does not show any agent managed computers, why is that? Or is it supposed to be like that and i'm missing something here? Thank you

  • New Document panel does not accept inputs

    I am new user of InDesign, newly installed. I cannot get the "New Document" panel to accept any keyboard entries except "Page size" label, "Orientation" and "Number of Pages". It will not accept width, height, column numbers or margins. Is there some

  • HT201299 I lost cellulare on my iPad

    My iPad had problem with code of 1009 , I erased all of data and setting to install apps and .., after that I lost my cellular too on my iPad , DMVJR1BJF185 is my serial number and I tried to creat new Apple ID and .. But now I can't install any app