Help getting a form with check box capabilities?

Hi all,
I built a new site using Muse, which I am very happy with so far, but I am finding the forms a bit limiting. The previous website, which I am replacing with the new muse site, was built using Dreamweaver. The old site had a form with check boxes and it pointed to a PHP directory. Is there a way to acheive the same results in Muse? Either a form widget update (without having to use BC), or a simple way to configure Muse to interact with my PHP directory? I'm not a coder, but I can manage some light work.
Any help would be greatly appreciated.
Thanks!

Thanks Morgan! Jotform is in the realm of possiblities; however, the company the site is for has a very strict privacy policy, which might be a concern when looking at free form builders. I should have mentioned that before.
I beleive the best way to acheive what I'm trying to do is by linking the existing PHP directory to the new Muse site. The existing form built in Dreamweaver works fine, I just need to get the same form to work in Muse. Is there a way to do that?

Similar Messages

When I click the iCloud button I get a browser with check boxes, not slider buttons and it does not have a "backup and storage" button. So I cannot set up backup.

When I open my iCloud browser it looks different than "normal." It shows the list with check boxes, not slider on-off buttons. It dos not show a "storage and backup" button so I cannot set up my backup. What is wrong?

If see something like the image below it's because you are looking at the iCloud settings on your Mac, not on an iOS device (which has sliders). Storage & Backup isn't in the Mac settings because you cannot back up your Mac to iCloud. Only iOS devices can back up to iCloud. On a Mac, you can get information about your iCloud account storage by looking at the green usage bar at the bottom and by clicking the "Manage..." button on the bottom right.

If i have a form with check boxes. Can I add a button that will display the boxes that the user selected on a new page?

For example, there are 10 check boxes and the user selects 5 of those boxes. Then they click a submit button. Just the information from those boxes would be displayed so they can print it. Is this possible? Any help pointing me in the right direction would be appreciated.

That is definitely possible.
Option 1: checkboxes are all named differently.
In the click event for the submit button, add some code like this...
if (cbChoice1 == "1") p2.tfChoice1.presence = "visible";
else p2.tfChoice1.presence = "hidden"; //can use "invisible" if preferred
if (cbChoice2 == "1")...
Option 2: checkboxes are named the same
In the click event for the submit button, add code like this...
var checkboxes = xfa.resolveNodes("cbChoice[*]");
var textfields = xfa.resolveNodes("p2.tfChoice[*]");
for (i=0; i<checkboxes.length; i++){
if( checkboxes.item(i).rawValue == "1") textfields.item(i).presence = "visible";
else textfields.item(i).presence = "hidden";

Hi! I am newbie to Reports need help with check boxes

Hi! I am newbie to Reports need help with check boxes. I am try-in to make a new check boxes that will validate in runtime. I have created two frames and one frame is dummy and other frame has big X line on it with conditions. Is this a right way to create check box! Please help thanks!

and one frame is dummy and other frame has big X
line on it with conditions. Is this a right way to
create check box! Please help thanks!Instead of creating a frame for X, you can create Ractangle and place X in it. Rest is fine.

ALV with Check Boxes

Can I get a sample program of ALV (oops) with check boxes in it. thank you.

Types: begin of lt_io.
include structure mara. " Your Structure
Types: style_table type lvc_t_style.
Types: end of lt_io.
data: lt_io type table of lt_io,
ls_layout type lvc_s_layo,
lt_fcat type lvc_t_fcat,
lo_grid type ref to cl_gui_alv_grid.
field-symbols: <io> type lt_io,
<fcat> type lvc_s_fcat.
... fill your output table ....
ls_layout-stylefname = 'STYLE_TABLE'.
loop at lt_io assigning <io>.
PERFORM set_style USING 'CHECKBOX' "Your Filename
CHANGING <io>.
endloop.
... Fill Your Field Catalog lt_fcat
read table lt_fcat assigning <fcat>
where fieldname = 'CHECKBOX'.
<fcat>-checkbox = 'X'.
create grid control lo_grid.
CALL METHOD lo_grid->set_table_for_first_display
EXPORTING
is_layout = ls_layout
CHANGING
it_fieldcatalog = lt_fcat
it_outtab = lt_io[].
FORM set_button_to_line
USING iv_fieldname TYPE lvc_fname
CHANGING cs_io TYPE io.
DATA: ls_style TYPE lvc_s_styl,
lt_style TYPE lvc_t_styl.
ls_style-fieldname = iv_fieldname.
if cs_io-checkbox = ' '.
ls_style-style = cl_gui_alv_grid=>mc_style_enabled.
else.
ls_style-style = cl_gui_alv_grid=>mc_style_disabled.
endif.
ls_style-maxlen = 2.
INSERT ls_style INTO TABLE io-style_table.
ENDFORM. "set_icon_to_status_line
[/code].
A classical report is a program that generates a single list, which must contain all of the required detail information.
1) This procedure may result in extensive lists from which the user has to pick the relevant data.
2) For background processing, this is the only possible method. After starting a background job, there is no way of influencing the program.
3) The desired selections must be made beforehand and the list must provide detailed information.
4) For dialog sessions, there are no such restrictions.
5) The user is present during the execution of the program and can control and manipulate the program flow directly.
6) To be able to use all advantages of the online environment, classical reporting was developed into interactive reporting.
ALV is Application List viewer. Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain up to 90 columns in the display with the wide array of display options.
Advantages.
Collapse multiple reports into one, drastically cutting down your report development time
Save many hours using built-in ALV sorting, subtotaling and filtering capabilities
Add conditional structures into your ALV report: No programming required!
Combine ALV with display variants to meet a wide range of reporting requirements more easily
Dynamically reorder column layouts and add/subtract fields
Enable users and analysts to save their own personalized variants
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
declarations for spl.group.
GT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV
GT_SORT TYPE SLIS_T_SORTINFO_ALV, "for sort
DATA: LS_SORT TYPE SLIS_SORTINFO_ALV.
CLEAR LS_SORT.
LS_SORT-FIELDNAME = 'FIELD1'.
LS_SORT-SPOS      = 1.
LS_SORT-UP        = 'X'.
ls_sort-subtot    = 'X'. "subtotal
APPEND LS_SORT TO E06_LT_SORT.
APPEND LS_SORT TO E06_LT_SORT.
LS_SORT-FIELDNAME = 'FIELD2'.
LS_SORT-SPOS      = 2.
LS_SORT-UP        = 'X'.
ls_sort-subtot    = 'X'. "subtotal
APPEND LS_SORT TO E06_LT_SORT.
for creating the group..
DATA: LS_SP_GROUP TYPE SLIS_SP_GROUP_ALV.
CLEAR LS_SP_GROUP.
LS_SP_GROUP-SP_GROUP = 'A'.
LS_SP_GROUP-TEXT     = TEXT-005.
APPEND LS_SP_GROUP TO E07_LT_SP_GROUP.
and pass this info to FM...
layout-sUBTOTALS_TEXT = 'SUbt...'
and pass spl group info to fieldcatalog also...
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM      = G_REPID
            IS_LAYOUT               = GS_LAYOUT
            IT_FIELDCAT             = GT_FIELDCAT[]
            IT_SPECIAL_GROUPS       = GT_SP_GROUP[]
            IT_SORT                 = GT_SORT[]
TYPES :
BEGIN OF ty_vbak,
    vkorg TYPE vbak-vkorg,             " Sales organization
    kunnr TYPE vbak-kunnr,             " Sold-to party
    vbeln TYPE vbak-vbeln,             " Sales document
    netwr TYPE vbak-netwr,             " Net Value of the Sales Order
    waerk TYPE vbak-waerk,             " Document currency
END OF ty_vbak.
DATA:
vbak    TYPE vbak,
gt_vbak TYPE TABLE OF ty_vbak.
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg,              " Sales organization
s_kunnr FOR vbak-kunnr,              " Sold-to party
s_vbeln FOR vbak-vbeln.              " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
     Form f_read_data
FORM f_read_data.
SELECT vkorg kunnr vbeln netwr waerk
      UP TO p_max ROWS
    INTO TABLE gt_vbak
    FROM vbak
   WHERE kunnr IN s_kunnr
     AND vbeln IN s_vbeln
     AND vkorg IN s_vkorg.
ENDFORM.                               " F_READ_DATA
     Form f_display_data
FORM f_display_data.
TYPE-POOLS: slis.                    " ALV Global types
DEFINE m_fieldcat.
    add 1 to ls_fieldcat-col_pos.
    ls_fieldcat-fieldname   = &1.
    ls_fieldcat-ref_tabname = 'VBAK'.
    ls_fieldcat-do_sum      = &2.
    ls_fieldcat-cfieldname = &3.
    append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
    add 1 to ls_sort-spos.
    ls_sort-fieldname = &1.
    ls_sort-up        = 'X'.
    ls_sort-subtot    = &2.
    append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
    ls_fieldcat TYPE slis_fieldcat_alv,
    lt_fieldcat TYPE slis_t_fieldcat_alv,
    lt_sort     TYPE slis_t_sortinfo_alv,
    ls_sort     TYPE slis_sortinfo_alv,
    ls_layout   TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'.                  " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'.                  " Sort by kunnr and subtotal
m_sort 'VBELN' ''.                   " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            is_layout   = ls_layout
            it_fieldcat = lt_fieldcat
            it_sort     = lt_sort
       TABLES
            t_outtab    = gt_vbak.
ENDFORM.
Check out these sample programs
BCALV_GRID_01
This program illustrates how the events for print processing PRINT_TOP_OF_PAGE,
PRINT_END_OF_PAGE, PRINT_TOP_OF_LIST,PRINT_END_OF_LIST are handled. The
corresponding handler methods control the appearance of the list printed.
BCALV_GRID_02
Show a detail list in an amodal window. There is no second dynro needed in contrast to
BCALV_GRID_03.
BCALV_GRID_03
This program implements a function on event DOUBLE_CLICK. According to the selected line data
from table SBOOK is selected and displayed by a second ALV Control in a dialog dynpro.
BCALV_GRID_04
Illustrates the use of exceptions (lights or leds). According to the values of SFLIGHT-SEATSOCC, the
lights are set to 1 (red), 2 (yellow) or 3 (green).
BCALV_GRID_05
Demonstrate the creation of an own toolbar button.
BCALV_GRID_06
Demonstrate the creation of an own context menu.
BCALV_GRID_07
Append a menu button to the standard toolbar.
BCALV_GRID_08
Append a menu with default button to the standard toolbar. It is exactly the same as
BCALVC_TB_WITH_MENU except for methods HANDLE_MENU_BUTTON and HANDLE_TOOLBAR.
Editable ALV grids
BCALV_EDIT_01
This report illustrates the simplest case of using an editable/noneditable ALV Grid Control.
BCALV_EDIT_02
This report illustrates how to set chosen cells of an ALV Grid Control editable.
BCALV_EDIT_03
In this example the user may change values of fields SEATSOCC (occupied seats) and/or PLANETYPE.
The report checks the input value(s) semantically and provides protocol messages in case of error
BCALV_EDIT_04
This report illustrates how to add and remove lines to a table using the ALV Grid Control and how to
implement the saving of the new data.
BCALV_EDIT_05
This example shows how to use checkboxes within an ALV Grid Control. You learn:
(1) how to define a column for editable checkboxes for an attribute of your list
(2) how to evaluate the checked checkboxes
(3) how to switch between editable and non-editable checkboxes
BCALV_EDIT_06
This example shows how to define a dropdown listbox for all cells of one column in an editable ALV
Grid Control.
BCALV_EDIT_07
This example shows how to define dropdown listboxes for particular cells of your output table.
BCALV_EDIT_08
This report implements an ALV Grid Control with an application specific F4 help. The following aspects
are dealt with:
(1) how to replace the standard f4 help
(2) how to pass the selected value to the ALV Grid Control
(3) how to build an f4 help, whose value range depend on a value of another cell.
Check this link tooo
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/07/23/oopsALVin+ABAP&showComments=true
The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
How you call this function in your report?
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
check this link
http://abapprogramming.blogspot.com/
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5dc3e690-0201-0010-1ebf-b85b3bed962d
Changing width of a custom container dynamically
Display Page numbers in ALV
Insert picture in selection screen.
Logo in OO ALV Grid
check these links
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
Try these links
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
For More alv report examples check these Tcodes LIBS, BIBS Here u can find more number of examples on alv reports of different kinds
check this sample code for intercative alv report
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
       EBELN LIKE EKKO-EBELN,
       AEDAT LIKE EKKO-AEDAT,
       BUKRS LIKE EKKO-BUKRS,
       BSART LIKE EKKO-BSART,
       LIFNR LIKE EKKO-LIFNR,
       END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
      WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
       EBELN LIKE EKPO-EBELN,
       EBELP LIKE EKPO-EBELP,
       MATNR LIKE EKPO-MATNR,
       MENGE LIKE EKPO-MENGE,
       MEINS LIKE EKPO-MEINS,
       NETPR LIKE EKPO-NETPR,
       END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
      WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
      WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
declaration for events table where user comand or set PF status will
be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
      WA_EVENT TYPE SLIS_ALV_EVENT.
declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
      I_VARIANT1 TYPE DISVARIANT,
      I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*&      Form BUILD_FIELDCATLOG
      Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT    = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    "BUILD_FIELDCATLOG
*&      Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     I_LIST_TYPE           = 0
   IMPORTING
     ET_EVENTS             = V_EVENTS
EXCEPTIONS
   LIST_TYPE_WRONG       = 1
   OTHERS                = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "EVENT_CALL
*&      Form POPULATE_EVENT
     Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
    WA_EVENT-FORM = 'TOP_OF_PAGE'.
    MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
    WA_EVENT-FORM = 'USER_COMMAND'.
    MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM.                    "POPULATE_EVENT
*&      Form data_retrieval
retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM.                    "data_retrieval
*&      Form bUild_listheader
      text
     -->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM.                    "build_listheader
*&      Form display_alv_report
      text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     I_CALLBACK_PROGRAM                = V_REPID
I_CALLBACK_PF_STATUS_SET          = ' '
     I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
     I_CALLBACK_TOP_OF_PAGE            = 'TOP_OF_PAGE'
     I_GRID_TITLE                      = I_TITLE_EKKO
I_GRID_SETTINGS                   =
IS_LAYOUT                         = ALV_LAYOUT
     IT_FIELDCAT                       = I_FIELDCAT[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
    i_default                         = 'ZLAY1'
     I_SAVE                            = 'A'
    is_variant                        = i_variant
     IT_EVENTS                         = V_EVENTS
    TABLES
      T_OUTTAB                          = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "display_alv_report
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = IT_LISTHEADER
   i_logo                   =
   I_END_OF_LIST_GRID       =
ENDFORM.                    "TOP_OF_PAGE
*&      Form USER_COMMAND
      text
     -->R_UCOMM    text
     -->,          text
     -->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN '&IC1'.
      READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
      PERFORM BUILD_FIELDCATLOG_EKPO.
      PERFORM EVENT_CALL_EKPO.
      PERFORM POPULATE_EVENT_EKPO.
      PERFORM DATA_RETRIEVAL_EKPO.
      PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
      PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM.                    "user_command
*&      Form BUILD_FIELDCATLOG_EKPO
      text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    "BUILD_FIELDCATLOG_EKPO
*&      Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   EXPORTING
     I_LIST_TYPE           = 0
   IMPORTING
     ET_EVENTS             = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG       = 1
OTHERS                = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH

Grid with check box.

Hi,
I want to make a grid with check box. I want to have two column in the grid. One column of the grid will show some column name of a table and the other column will contain check box. If I tick the check box of a the selected row of the grid then the value (e.g. Y or N) will store in the particulr table.
I have written some code regardig this. But I am not getting my problem solved. I am sending the code sample below.
oNewItem = oOrderForm.Items.Add("MyGrid", SAPbouiCOM.BoFormItemTypes.it_GRID)
        oNewItem.Left = 20
        oNewItem.Top = 30
        oNewItem.Width = 198
        oNewItem.Height = 130
oGrid = oNewItem.Specific
Dim str As String
        str = "SELECT COLUMN_NAME AS FACILITIES, '' AS TICK FROM PIONEER.INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = N'OITM' AND ORDINAL_POSITION BETWEEN 102 AND 165"
        oOrderForm.DataSources.DataTables.Add("MyDataTable")
        oOrderForm.DataSources.DataTables.Item(0).ExecuteQuery(str)
        oGrid.DataTable = oOrderForm.DataSources.DataTables.Item("MyDataTable")
        ' Set columns size
        oGrid.Columns.Item(0).Width = 270
        oGrid.Columns.Item(0).Editable = False
        oGrid.Columns.Item(1).Width = 70
        oGrid.Columns.Item(1).Type.gct_CheckBox.GetValues()
From The last line I am getting problem. Please any one can help me for this problem.
Thank you
Amit Kumar Shai

Hi
The last line should read like this
oGrid.Columns.Item(1).Type = SAPbouiCOM.BoGridColumnType.gct_CheckBox

Problem with check box in ALV Grid Display

I am Displaying Material Master Data in ALV Grid Display with Check Box for each record and if i checked check box then i am processing Update operation in Database, my question is after perform update operation check box should be clear.
Kindly help me!!!!

Hello Raj
Given the fact that you do not tell us the most important piece of information (namely whether you are using OO-based ALV or not) I assume you are using fm-based ALV lists.
In this case you probably have defined a USER_COMMAND routine as described in the documentation of the fm.
FORM user_command USING r_ucomm LIKE sy-ucomm
                         rs_selfield TYPE slis_selfield.
* define local data
DATA: ls_outtab LIKE LINE OF gt_outtab,
            ld_idx       TYPE i.
LOOP AT gt_outtab INTO ls_outtab
                 WHERE ( chkbox = 'X' ).
    ld_idx = syst-tabix.
    " Call your update function / method / perform
   ls_outtab-chkbox = space.
   MODIFY gt_outtab FROM ls_outtab INDEX ld_Idx
      TRANSPORTING chkbox.
ENDLOOP.
" And now trigger refresh of the ALV display:
rs_selfield-refresh = 'X'. " <<< !!!
ENDFORM.
Regards
Uwe

Validating forms using check boxs

hi i am trying to validate a form using check boxs where all of the elements have the same name. Using the code below it enables validation when only one check box is available, however with muliple check-boxs it goes into and eternal loop and never executes the code! Any help on this matter would be most appreciated.
<SCRIPT language="javaScript">
function validate()
if (!document.myform.pkey.checked)
alert("Please Select a Questionnaire to delete!!");
return false;
</SCRIPT>

Hi,
When you have multiple checkboxes with same name, it will form an array of check boxes. So you have to validate them as below.
flag=0;
if(chkcntr>1)
for(i=0;i<frm.ch.length;i++)
if(frm.ch.checked)
flag=1;
break;
else
if(frm.ch.checked)
flag=1;
if(flag==1)
//checkbox selected,can give any action
else
// checkbox not selected,give alert

I have created a .pdf form with text boxes, but the recipients are unable to fill in their answers.

How can I distribute a form with text boxes so that the recipients are able to type into the boxes?

This forum is for the Adobe FormsCentral (formscentral.adobe.com) which is a service that allows you to create, collect and analyze data using an online web form. You should ask PDF related form questions in the Acrobat forums: http://forums.adobe.com/community/acrobat/forms
I'll move your post to that forum so you don't need to retype it. They can help you out...
Randy

How to Show data in grouping with check boxes.

Hi Experts,
I am new to ADF and want to resolve one issue for my urgent project requirement.
My Problem is :
In Employee, Department relationship i need to show data in a grouping of departments like for Marketing department all the related employees should come in a single column.
eg .
Dept Name Emp Name
Marketing Akshay Nitin Ritu
Sales Neeraj Vikas Venu
* All these department names and employees should come with check boxes and if i select one department all the employees should be checked.
Please Please suggest any solution asap.
Many Thanks in Advance.
Regards,
Nitin
Edited by: user10980736 on Feb 7, 2011 8:32 AM

hi,
You can create two value nodes for storing these collections. The first one would be singleton node as it is the main list. Under that create the second node with singleton = false.
e.g.
---NodeA
    --attrA1
    --attrA2
    --NodeB(singleton = false)
            --attrB1
            --attrB2
Now populate collection of object A in NodeA and after adding element in NodeA populate respective elements in NodeB.
IPrivate<View>View.INodeANode nodeA = wdContext.NodeAnode();
for (Iterator it = collectionA.iterator(); it.hasNext(); )
     ObjectA objA= it.next();
     IPrivate<View>View.INodeAElement nodeAElem= nodeA.createNodeAElement();
     wdCopyservice.copy Corresponding(objA,nodeAElem);
     nodeA.addElement(nodeAElem);
     Collection collectioB =objA.getCollectionB();
     for (Iterator it1 = collectionB.iterator(); it1.hasNext(); )
         ObjectB objB= it1.next();
        IPrivate<View>View.INodeBNode nodeB = nodeAElem.nodeBnode();
        IPrivate<View>View.INodeAElement nodeBElem= nodeB.createNodeBElement();
        wdCopyservice.copy Corresponding(objB,nodeBElem);
        nodeB.addElement(nodeBElem);
Bind NodeA to the first table and NodeB to second one.
After that when you select record in first table automatically its corresponding records will be populated in second table.
Hope this helps!
Monalisa

Need help writing formula to count checked boxes

This is probably a no brainer for you experts but I am making a spreadsheet for scoring a test and I have put in check boxes. Beside in the adjacent cells to the cells with check boxes I have placed the values that correspond to those check boxes. I want to be able to format a cell to do several things.
First I need to link the adjacent values to the check box cell that it corresponds to.
Then I need to format a cell to
1. Count the number of boxes that have been checked.
2. Display the values that are linked to cells if the total is 10 or under
3. Display text that relates to the values that are linked to the cells.
Your help is greatly appreciated.
Shane

The Pickler wrote:
In answer to your first question. Each question is multiple choice and my layout is chosen to mimick the test itself for easy scoring.
So I take this to mean that it is only valid to have one check per row.
Second, if there are more than 10 I want it left blank.
Right now, it is simpler to have this behave the the other way, in that it eliminates a complicating special case.
So here's a screen shot of what I have on this:
!http://img227.imageshack.us/img227/6263/questionairesummarywo1.png!
Let me discuss this and explain some of the changes I made to your initial attempt.
(1) Since I presumed one check per row, you can see in the "Responses" table I switched over to this type of data entry. This has several advantages and, most importantly, was key in clarifying my thoughts downstream. It does not permit the invalid multi-check per row and can be more readily entered via keyboard. The use of A,B,C,D for the choices is arbitrary; they could be 1,2,3,4 or any other distinct set of 4. If you ever want to simultaneously evaluate several questionnaires this can be accommodated better by adding additional columns to this table.
(2) The references associated with each question's choices are encoded in the "Key" table. This table can be squirreled away on another sheet dedicated to questionnaire configuration and remain out of harm's way while entering response data. The column headings must correspond with the answer designations used in the "Responses" table.
(3) The "Tally" table is purely for the computation of the "Summary". It allows both the number of each type of reference to be computed and the listing of the references. Since it is purely computational, it should be hidden away on another sheet.
(4) The "Descriptions" table is where the association of references and the statements is expressed. Since, like the "Key" table, it is likely edited infrequently, this too should be squirreled away on the questionnaire configuration sheet.
(5) Finally, the "Summary" table display the counts of each reference type and zero to ten of the references and associated statements. Currently, this shows as many as the first 10 because, as stated above, it avoids a complicating special case and is displayed elegantly via this filtered table (which avoid displaying the unused reference rows). The count is always the total count, even if it is exceeds ten.
Third, since I don't know the first thing about writing formula's I guess I need to have you hold my hand through this process or teach me some basics. Please.....if your kind and willing enough to do so.
As there are more than a couple of formulas here, the least time consuming way to explain them is simply to upload this Numbers document to a place you (or anyone else who is interested) can download it. Explore it for yourself and feel free to ask any questions you have about it or how to modify it to better suite your needs.
You will find that the file contains three sheets. What is presented here resides solely on the third sheet. The first two sheets can safely be ignored/deleted, but I have left them in as they represent two earlier attempts (the first only partial, the second, more complete) at a solution. Some may find them interesting, perhaps containing good techniques for other problems.
[Questionnaire Summary Numbers Document|http://www.mediafire.com/?1125t9nm9xm|Click to download a zip archive]
This will take you to a page that will allow you to download the file directly (I apologize for any of this free hosting site's advertisements that you might find offensive). Click on the link in the yellow region on the mid-left part of the page. If all goes well, the zip will download and automatically unarchive into the Numbers document "QuestionnaireSummary.numbers". Let me know if you have trouble.

How to create a tree structure with check boxs using Windows Activex Control?

Hi,
I am very new to LabVIEW. I am trying to create a tree structure with Check Boxes like the below. It would be great if someone would show me a right direction to go forward.
The aim is to select the item and one by one i have to get the Path and give as an input to by application VI.
Thanks and Best Regards
Prathap

Hi Andy,
Sorry i pasted the Picture.. Pls find the attached picture.
Following are my requirement:
1) I need to populate a tree given a root directory, listing all the Folders and file of cetain pattern(*.pjt... ther will be only one *.pjt in every subfolders).
2) I need a check box for every *.pjt to select the its path. The list of pjt files selected are used for my automation test suit.
Pls let me know if you need more info.
Best Regards
Prathap
Attachments:
tree.JPG ‏73 KB

Popup with check box

Hi ,
Can Anyone please tell the function module for POPUP with check box.
Thanks & Regards
Ruchi Tiwari

Hi Ruchi,
U can use reuse_alv_popup_to_select Fuction module . so that u will see the the alv with checkbox..
Otherwise If u don't want check box u can use popup_to_confirm FM.
Thanks & regards,
Nishad.

ALV with Check Box

Hi Experts,
I have an ALV grid display with check box.
I need to display the ALV with only check box. I don't need the Grid towards the left.
So can anyone tell me how to avoid the Grid which is at the left.
I am using "REUSE_ALV_GRID_DISPLAY" Function Module.
Thanks,
Karthik MD

Hi,
I am pasted my code below.
wa_fieldcat_s-fieldname = 'FLAG'.
wa_fieldcat_s-outputlen = 1.
wa_fieldcat_s-checkbox = c_check.
wa_fieldcat_s-edit = c_check.
wa_fieldcat_s-col_pos = 1.
wa_fieldcat_s-seltext_l = 'Select'.
wa_fieldcat_s-no_out = 'X'.
APPEND wa_fieldcat_s TO fieldcat_s.
CLEAR wa_fieldcat_s.
wa_fieldcat_s-fieldname = 'SRID'.
wa_fieldcat_s-key = 'X'.
wa_fieldcat_s-fix_column = 'X'.
wa_fieldcat_s-seltext_l = 'SR Global ID'(101).
wa_fieldcat_s-col_pos = 2.
APPEND wa_fieldcat_s TO fieldcat_s.
CLEAR wa_fieldcat_s.
wa_fieldcat_s-fieldname = 'PERNR'.
wa_fieldcat_s-seltext_l = 'Employee Number'(102).
wa_fieldcat_s-col_pos = 3.
APPEND wa_fieldcat_s TO fieldcat_s.
CLEAR wa_fieldcat_s.
wa_fieldcat_s-fieldname = 'ZZAGREEMENT_ID'.
wa_fieldcat_s-seltext_l = 'Agreement ID'(103).
wa_fieldcat_s-col_pos = 4.
APPEND wa_fieldcat_s TO fieldcat_s.
CLEAR wa_fieldcat_s.
wa_fieldcat_s-fieldname = 'IT0041ENDDA'.
wa_fieldcat_s-seltext_l = 'HCMS END DATE'(104).
wa_fieldcat_s-col_pos = 5.
APPEND wa_fieldcat_s TO fieldcat_s.
CLEAR wa_fieldcat_s.
wa_fieldcat_s-fieldname = 'ASSIGN_END_DATE'.
wa_fieldcat_s-seltext_l = 'Assignment End Date'(105).
wa_fieldcat_s-col_pos = 6.
APPEND wa_fieldcat_s TO fieldcat_s.
CLEAR wa_fieldcat_s.
wa_fieldcat_s-fieldname = 'FNAME'.
wa_fieldcat_s-seltext_l = 'First Name'(106).
wa_fieldcat_s-col_pos = 7.
APPEND wa_fieldcat_s TO fieldcat_s.
CLEAR wa_fieldcat_s.
wa_fieldcat_s-fieldname = 'LNAME'.
wa_fieldcat_s-seltext_l = 'Last Name'(106).
wa_fieldcat_s-col_pos = 8.
APPEND wa_fieldcat_s TO fieldcat_s.
CLEAR wa_fieldcat_s.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program       = prog_name
        i_callback_pf_status_set = 'PF_STATUS'
        i_callback_user_command = 'USER_COMMAND'
        is_layout                = l_layout
        it_fieldcat              = fieldcat_s[]
        it_events                = t_events[]
        i_save                   = 'X'
      TABLES
        t_outtab                 = lt_final
      EXCEPTIONS
        program_error            = 1
        OTHERS                   = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Thanks,
Karthik MD

Using the Convert button in Adobe XI results in a pdf with check boxes containing ? marks

Using the Convert button in Adobe XI results in a pdf with check boxes containing ? marks@

Hi Charles,
Are you still facing this issue. Is this issue reproducible with every file you want to convert.
Regards,
Ajlan Huda.

Help getting a form with check box capabilities?

Similar Messages

Maybe you are looking for