Help getting Arch64 installed [SOLVED]

I'll try my best not to make this too wordy:
I rebuilt my system last weekend using the Arch 64 FTP ISO. It went very well. I had a major harddrive problem today so I tried to re-install with the exact same disc. It doesn't work. For some reason, any ISO that I burn for 64 bit Linux will simply not be recognized when BIOS looks to the disc. In order to not waste time, these are the details:
1) The first attempt was with a disc that worked perfectly less than 7 days ago
2) I tried different images from different servers, and they aren't recognized
3) My system picks up on the copy of Knoppix I burned today
4) That copy of Knoppix is on the same set of discs that I burned my SEVEN copies of the ISO
5) Other live discs that I have also start properly
6) My system picks up on a 32 bit Arch disc that I have
7) And no, I did not copy the ISOs themselves. They burned the way that they should
BIOS is fine. My DVD drive seems to be fine. The discs that I'm using seem to be fine. Nothing at all seems to help.
This one is bad. Help?!?!?!?!?!?!
It turns out the Arch 64 FTP install ISOs are broken. How I got the one that I had to work is beyond me. My best guess is that there were still install files from the failed attempt that I had already on the harddisk. The 64 bit Base ISO using FTP as the install method worked perfectly.

shane_hjorth wrote:
jpdrawneek1 wrote:
Please provide exact error messages/symptoms.on the JES install wizard:
only installing the AM=> This is a pre-existing installation of WebServer? Is it installed on the same server or a remote server?On the same box - all in virtbox
pre-existing, but only because JES died first time for AM
>
Configure Now option
legacy mode to work with calendar (that what the installer tells me)=> Legacy mode is required as Realm mode is not supported for Delegated Administrator.
Gets to the Specify Sun Java Web Server page:
Error is:
The WebServer Administration Server cannot be contacted using the specified values.
Enter Correct Values for AdminPort,AdminPassword and AdminUserId and check that the WebServer Administrator Server is running.The default values for webserver are:
https://<server>:8989
yep
>
Note: Secure Admin Instance (https)
Go to firefox and put in the same details works just fine.
So you can log in as the admin user/password to https://<server>:8989
Yes - hence my ask for help
>
For amconfig I need to have AM installed, and i can't use the JES installer to config AM if its already installed, so can't provided the exact error for that.Access Manager can indeed be a real pain. I would suggest also asking for assistance on the access manger forum:
http://forums.sun.com/forum.jspa?forumID=760
I already posted there, no replies yet.
>
Regards,
Shane.

Similar Messages

Help getting OS installed...

Alright, I have a friend that just purchased a G4 off of the net, and the people never erased the hard drive, so he is trying to get their OS off and his store bought OS X on. He finally figured out to get through their password, and got that worked out, but now he popped in his OS install disc, and it asks for the restart, he does, and then nothing happend.
How can he boot from the disc? I thought it was com opt shift delete, but he says that is not working.
Any ideas?
Thanks,
Jordan

To select a different boot volume there are two options:
1. Permanent change of boot volume: Open Startup Disk preference, select desired startup volume from icon list, click on Restart button.
2. Temporary change of boot volume: Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the icon of the desired startup volume, click arrow button.
If your cannot start the computer with the disc you have then there are three basic possibilities: 1. The version of OS X on the installer disc can not boot that model; 2. You are using an OEM disc (gray label) that will only work with a specific Mac model; 3. The disc you have is an Upgrade disc (the word "Upgrade" will be printed on the disc label) and will only work if a prior version of OS X is already installed.
Because I don't know the specific Mac model involved I cannot tell you what the minimum required OS X version would be.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Clearpass Software install Error 255 need help getting to install. Log file below

Execution Request for advert 00220023 package 00200063 program Clearpass Test Install 6.3.5 state change from NotExist to AdvancedDownload execmgr 10/21/2014 9:36:26 AM 6064 (0x17B0)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200063",ProgramID="Clearpass Test Install 6.3.5", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014
9:36:26 AM 6064 (0x17B0)
Mandatory execution requested for program Clearpass Test Install 6.3.5 and advertisement 00220023 execmgr 10/21/2014 9:36:26 AM 448 (0x01C0)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200060",ProgramID="Clearpass 6.3.5", actionType 45l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014 9:36:26
AM 1424 (0x0590)
Creating mandatory request for advert 00220023, program Clearpass Test Install 6.3.5, package 00200063 execmgr 10/21/2014 9:36:26 AM 448 (0x01C0)
Policy arrived for parent package 00200063 program Clearpass Test Install 6.3.5 execmgr 10/21/2014 9:36:26 AM 1424 (0x0590)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200063",ProgramID="Clearpass Test Install 6.3.5", actionType 6l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014
9:36:26 AM 1424 (0x0590)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "00220023";
ClientID = "GUID:9266F835-718C-4617-BA5E-4F613E3239B7";
DateTime = "20141021133626.265000+000";
MachineName = "S2-IS-SCCM-VM-T";
ProcessID = 3276;
SiteCode = "002";
ThreadID = 1424;
execmgr 10/21/2014 9:36:26 AM 1424 (0x0590)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistWaitingContentEvent
AdvertisementId = "00220023";
ClientID = "GUID:9266F835-718C-4617-BA5E-4F613E3239B7";
DateTime = "20141021133626.281000+000";
MachineName = "S2-IS-SCCM-VM-T";
PackageName = "00200063";
PackageVersion = "1";
ProcessID = 3276;
ProgramName = "Clearpass Test Install 6.3.5";
SiteCode = "002";
ThreadID = 448;
execmgr 10/21/2014 9:36:26 AM 448 (0x01C0)
Successfully raised SoftDistWaitingContentEvent event for program Clearpass Test Install 6.3.5 execmgr 10/21/2014 9:36:26 AM 448 (0x01C0)
Execution Request for advert 00220023 package 00200063 program Clearpass Test Install 6.3.5 state change from WaitingDependency to WaitingContent execmgr 10/21/2014 9:36:26 AM 448 (0x01C0)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200063",ProgramID="Clearpass Test Install 6.3.5", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014
9:36:26 AM 448 (0x01C0)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200063",ProgramID="Clearpass Test Install 6.3.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014
9:36:26 AM 6064 (0x17B0)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200063",ProgramID="Clearpass Test Install 6.3.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014
9:36:26 AM 2140 (0x085C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200063",ProgramID="Clearpass Test Install 6.3.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014
9:36:26 AM 3692 (0x0E6C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200063",ProgramID="Clearpass Test Install 6.3.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014
9:36:26 AM 3692 (0x0E6C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200063",ProgramID="Clearpass Test Install 6.3.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014
9:36:26 AM 6064 (0x17B0)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200063",ProgramID="Clearpass Test Install 6.3.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014
9:36:27 AM 3692 (0x0E6C)
Processing [{C3E344C3-3915-4B09-82F9-DDA127A2606E}, 0]: OnContentAvailable execmgr 10/21/2014 9:36:29 AM 736 (0x02E0)
[{C3E344C3-3915-4B09-82F9-DDA127A2606E}]: Content Version 1 is available for advert 00220023, pkg: 00200063, program Clearpass Test Install 6.3.5. execmgr 10/21/2014 9:36:29 AM 736 (0x02E0)
An existing MTC token was not supplied, using ExecutionRequest's Id as MTC token and this execution request is the owner of resultant MTC task. execmgr 10/21/2014 9:36:29 AM 736 (0x02E0)
Request a MTC task for execution request of package 00200063, program Clearpass Test Install 6.3.5 with request id: {17193CDD-2B98-4B40-8B47-DBD264F0DD1C} execmgr 10/21/2014 9:36:29 AM 736 (0x02E0)
Execution Request for advert 00220023 package 00200063 program Clearpass Test Install 6.3.5 state change from WaitingContent to Ready execmgr 10/21/2014 9:36:29 AM 736 (0x02E0)
MTC task with id {17193CDD-2B98-4B40-8B47-DBD264F0DD1C}, changed state from 0 to 4 execmgr 10/21/2014 9:36:29 AM 5884 (0x16FC)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200063",ProgramID="Clearpass Test Install 6.3.5", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014
9:36:29 AM 736 (0x02E0)
Processing [{C3E344C3-3915-4B09-82F9-DDA127A2606E}, 0]: RemoveNotification execmgr 10/21/2014 9:36:29 AM 736 (0x02E0)
MTC signaled SWD execution request with program id: Clearpass Test Install 6.3.5, package id: 00200063 for execution. execmgr 10/21/2014 9:36:29 AM 5884 (0x16FC)
Sending ack to MTC for task with id: {17193CDD-2B98-4B40-8B47-DBD264F0DD1C} execmgr 10/21/2014 9:36:29 AM 5884 (0x16FC)
Executing program ClearPassOnGuardInstall.exe /S in Admin context execmgr 10/21/2014 9:36:29 AM 5884 (0x16FC)
Execution Request for advert 00220023 package 00200063 program Clearpass Test Install 6.3.5 state change from Ready to NotifyExecution execmgr 10/21/2014 9:36:29 AM 5884 (0x16FC)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200063",ProgramID="Clearpass Test Install 6.3.5", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014
9:36:29 AM 5884 (0x16FC)
Checking content location C:\Windows\ccmcache\5c for use execmgr 10/21/2014 9:36:44 AM 5884 (0x16FC)
Successfully selected content location C:\Windows\ccmcache\5c execmgr 10/21/2014 9:36:44 AM 5884 (0x16FC)
Executing program as a script execmgr 10/21/2014 9:36:44 AM 5884 (0x16FC)
Successfully prepared command line "C:\Windows\ccmcache\5c\ClearPassOnGuardInstall.exe" /S execmgr 10/21/2014 9:36:44 AM 5884 (0x16FC)
Command line = "C:\Windows\ccmcache\5c\ClearPassOnGuardInstall.exe" /S, Working Directory = C:\Windows\ccmcache\5c\ execmgr 10/21/2014 9:36:44 AM 5884 (0x16FC)
Running "C:\Windows\ccmcache\5c\ClearPassOnGuardInstall.exe" /S with 32bitLauncher execmgr 10/21/2014 9:36:44 AM 5884 (0x16FC)
Created Process for the passed command line execmgr 10/21/2014 9:36:44 AM 5884 (0x16FC)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "00220023";
ClientID = "GUID:9266F835-718C-4617-BA5E-4F613E3239B7";
CommandLine = "\"C:\\Windows\\ccmcache\\5c\\ClearPassOnGuardInstall.exe\" /S";
DateTime = "20141021133644.938000+000";
MachineName = "S2-IS-SCCM-VM-T";
PackageName = "00200063";
ProcessID = 3276;
ProgramName = "Clearpass Test Install 6.3.5";
SiteCode = "002";
ThreadID = 5884;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\ccmcache\\5c\\";
execmgr 10/21/2014 9:36:44 AM 5884 (0x16FC)
Raised Program Started Event for Ad:00220023, Package:00200063, Program: Clearpass Test Install 6.3.5 execmgr 10/21/2014 9:36:44 AM 5884 (0x16FC)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200063",ProgramID="Clearpass Test Install 6.3.5", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014
9:36:44 AM 5884 (0x16FC)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200063",ProgramID="Clearpass Test Install 6.3.5", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014
9:36:44 AM 5884 (0x16FC)
MTC task with id {17193CDD-2B98-4B40-8B47-DBD264F0DD1C}, changed state from 4 to 5 execmgr 10/21/2014 9:36:44 AM 5884 (0x16FC)
Program exit code 255 execmgr 10/21/2014 9:36:46 AM 2140 (0x085C)
Looking for MIF file to get program status execmgr 10/21/2014 9:36:46 AM 2140 (0x085C)
Script for Package:00200063, Program: Clearpass Test Install 6.3.5 failed with exit code 255 execmgr 10/21/2014 9:36:46 AM 2140 (0x085C)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramErrorEvent
AdvertisementId = "00220023";
ClientID = "GUID:9266F835-718C-4617-BA5E-4F613E3239B7";
DateTime = "20141021133646.327000+000";
ExitCode = "255";
MachineName = "S2-IS-SCCM-VM-T";
PackageName = "00200063";
ProcessID = 3276;
ProgramName = "Clearpass Test Install 6.3.5";
SiteCode = "002";
ThreadID = 2140;
UserContext = "NT AUTHORITY\\SYSTEM";
execmgr 10/21/2014 9:36:46 AM 2140 (0x085C)
Raised Program Error Event for Ad:00220023, Package:00200063, Program: Clearpass Test Install 6.3.5 execmgr 10/21/2014 9:36:46 AM 2140 (0x085C)
Execution is complete for program Clearpass Test Install 6.3.5. The exit code is 255, the execution status is FailureNonRetry execmgr 10/21/2014 9:36:46 AM 2140 (0x085C)
Requesting MTC to delete task with id: {17193CDD-2B98-4B40-8B47-DBD264F0DD1C} execmgr 10/21/2014 9:36:46 AM 2140 (0x085C)
MTC task with id: {17193CDD-2B98-4B40-8B47-DBD264F0DD1C} deleted successfully. execmgr 10/21/2014 9:36:46 AM 2140 (0x085C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200063",ProgramID="Clearpass Test Install 6.3.5", actionType 10l, value Result:FALSE, user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014
9:36:46 AM 2140 (0x085C)
Requesting MTC to delete task with id: {17193CDD-2B98-4B40-8B47-DBD264F0DD1C} execmgr 10/21/2014 9:36:46 AM 2140 (0x085C)
This execution request does not have a corresponding task in MTC. execmgr 10/21/2014 9:36:46 AM 2140 (0x085C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200063",ProgramID="Clearpass Test Install 6.3.5", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014
9:36:46 AM 2140 (0x085C)
Policy is updated for Program: Clearpass Test Install 6.3.5, Package: 00200063, Advert: 00220023 execmgr 10/21/2014 12:36:25 PM 5908 (0x1714)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="00200063",ProgramID="Clearpass Test Install 6.3.5", actionType 45l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l execmgr 10/21/2014
12:36:26 PM 5908 (0x1714)
CServiceWindowEventHandler::Execute - Received SERVICEWINDOWEVENT : START Event execmgr 10/21/2014 10:00:00 PM 3624 (0x0E28)
CExecutionRequestManager::OnServiceWindowEvent for START execmgr 10/21/2014 10:00:00 PM 3624 (0x0E28)
Auto Install is set to false. Do Nothing. execmgr 10/21/2014 10:00:00 PM 3624 (0x0E28)
CServiceWindowEventHandler::Execute - Received SERVICEWINDOWEVENT : END Event execmgr 10/22/2014 5:00:00 AM 676 (0x02A4)
The user has logged off. execmgr 10/22/2014 9:29:08 AM 744 (0x02E8)
Service startup. execmgr 10/22/2014 9:32:26 AM 3712 (0x0E80)

thank you and I will take a look at those logs
I was thinking it was because of permissions using the system account sccm uses to install the software? could that be the case? it works for some but not all. and there is a known issue from Aruba, the vendor, but of course they have not given us any fix.
the issue they had was when you install the 6.3.3 version through SCCM, which we orginally pushed out, the upgrade through the clearpass server or the push of the new 6.3.5 version through sccm does not work on all, but I would say maybe 25% at best do
from what i am seeing.

Need some help getting iTunes installed

I already know that I have a problem installing iTunes and its during the "publishing product information" part of the installation. I got my hands on a Windows XP Home Edition disc . . . I attempted to do the installation repair . . . part way through it I was asked to give the "administrators password" . . . this I do not know. After the third wrong password I was told that I needed to reboot and start over. I am trying to avoid the re-installing windows b/c of all the factory crap that I have on this comptuer.
Is there anyone out there that can break this down to me big bird and barney style?? I have been on the phone waiting to talk to someone at compaq from more than 80 mins now!!
Thanks
Puck

hi puckusmc!
I attempted to do the installation repair . . . part way through it I was asked to give the "administrators password" . . . this I do not know.
okay, it sounds like you've already found the correct KB doc for the "vanishing installation" problem:
http://docs.info.apple.com/article.html?artnum=300361
... so you're on the right track.
what administrative rights do you have on that PC?
if you don't have administrative rights, can you contact the administrator to get them to do the install for you?
love, b

Please Please help me. I have been trying to install Itunes 11 for 3 months. I deleted my old version and can not for the life of me get Itunes installed . I have Windows 7 Home. The message is " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BDOAF1

Please Please help me. I have been trying to install Itunes 11 for 3 months. I deleted my old version and can not for the life of me get Itunes installed . I have Windows 7 Home. The message is " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BDOAF1

Try the following user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

In need of help didn't install find my iPhone on my iPhone 5 and it got stolen from me at a dd's but I had my id and other important stuff in it I need to find it because I can't risk getting my identity stolen what can I do.

In need of help didn't install find my iPhone on my iPhone 5 and it got stolen from me at a dd's but I had my id and other important stuff in it I need to find it because I can't risk getting my identity stolen what can I do.

You don't have to install the Find My iPhone app - you need to switch the feature on in the settings on the phone.
If you go here: https://www.icloud.com/#find does your phone show up?
~Lyssa

On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. Yahoo was absouletly no help whatsoever; can you solve the mystery? Thanks

On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. I tried uninstalling and reinstalling FF; no change. Yahoo was absolutely no help whatsoever; can you solve the mystery? Thanks

HI Emmet,
thanks so much for your posts back. I really appreciate it and yes that does help to know that you could not get it working.
I did have some success, in removing the SSL Authentication checkbox in the smtp server settings - I found that this allowed my friend to be able to send mail from the mail app via his sbcglobal (yahoo) account.
So that did help but of course the messages do not have ssl encryption and I'm not sure how big a deal that is for an individual. He is able to receive mail but unless the SSL authentication box is unchecked, he cannot send.
i hope that helps anyone out there also!
Thanks also for the tip about sparrow - yes I have heard of it and it is very popular, he may end up using that in the end.
Thanks again, much appreciated.
Felix

I am new to DPS and have been trying unsuccessfully to get it installed and working. Please help!

I am new to DPS and have been trying unsuccessfully to get it installed and working.
I have updated the entire Creative Cloud repeatedly, even used the cleaner tool to remove older files, preferences and OOBE file and still cannot use update from help menu in IndesignCC to get DPS tools. It is greyed out.
No options available in the folio builder either. And if i close the folio builder the only way it comes back is to reset the publishing profile.
Please help as learning this software has become a priority in my industry.

Hi Bob
I have downloaded the tools and get an admin error trying to install it. ( See attached).
Apologies for the late response. This site was very slow yesterday.
Can we attempt to resolve this issue via email instead?

Hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.

hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.

Hi vijayanandhtkp,
It sounds like you are getting the Connect to iTunes screen as discussed in this article.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
If so, please check out this article as linked from there.
Use iTunes to restore your iOS device to factory settings - Apple Support
Thank you for using Apple Support Communities.
Nubz

[Self Solved] Problems trying to get the install.exe to run

After trying for 3 days to get the install.exe to run on my new computer I eventually ran out of options. You could see, however, that in the task manager, once you clicked on the .exe that it would run for a bit, max out at ~8k and then disappear. The two things I could think of were that A. It might have been a registry error that is preventing me from running the .exe and B. that it might be a service that is blocking it. I did not want to go through the stress of re-installing windows just so I could get the install.exe to run over a hunch that my registry might be foul. Instead I performed a clean boot that would prevent a service from stopping the installation. Upon restarting I was able to run the install.exe and I finally have adobe reader running. For anyone who is not familiar with a clean boot it can be done as follows:
Pressing [Win] + r OR Start > search
and then typing "msconfig.exe" + enter will open up the system configuration screen.
then click on the "Services" tab, followed by clicking the box "Hide all Microsoft services" so that it has a checkmark inside it, followed by clicking the button "Disable All"
Your computer will then be prompted to restart
Upon launching your windows interface go to your downloads folder and then try to run the install.exe, if it works, as did mine, it would appear that a certain service was blocking it.
Hope this helps the .02% of people who actually have this problem when installing

Alternate solution: use the offline installer from http://get.adobe.com/reader/enterprise/

My iphone 4 is getting stuck during gaming when sim card is inserted. Call anyone help me out to solve this problem?

My iphone 4 is getting stuck during gaming when sim card is inserted. Call anyone help me out to solve this problem?

That doesn't make any sense to me at all, unless the games you're trying to play have some sort of online connection/capability and you're in a weak signal area, thus the games can't make the required online connection. What happens when you turn cellular data off in settings: Settings>General>Network>Cellular Data>Off.

Is there offline mavericks help? There should be an option to get it installed. We need help more often than we are online. The idea of only online help is lazy and uncaring of the dealer to clients.

Is there offline Mavericks help? There should be an option to get it installed. We need help more often than we are online. If there isn't, then idea of only online help is lazy and uncaring of the dealer to clients.

I've done just that.
And another on the finder column bug in list mode.
And a few more in the pipeline if I find the motivation: I'm afraid my long relationship with Apple is flagging. They are excessively focussed on consumer goods and leaving their core business to wither away.
Maybe more serious users aren't profitable to them, and they are happy to let it wither.
So presumably they are happy if we wander off and start focussing on all the open source unixes out there.
p.s. not happy with general Apple trends since about 10.6.8, can anyone tell ?

[SOLVED!!!]Need help getting internet cafe software to execute...

Already submitted to AUR: https://aur.archlinux.org/packages.php?ID=56282
I'm building a PKGBUID for a program called Cafe Pilot. I'm using it for the computer lab in my shop and could use some help getting it to execute properly. I'm pretty sure the PKGBUILD is good, because I can build and install just fine, but I get the error message below when I try to execute via CLI:
Caused by: java.lang.ClassNotFoundException: CafePilot_Server.jar
at java.net.URLClassLoader$1.run(URLClassLoader.java:217)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:205)
at java.lang.ClassLoader.loadClass(ClassLoader.java:321)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:294)
at java.lang.ClassLoader.loadClass(ClassLoader.java:266)
Could not find the main class: CafePilot_Server.jar. Program will exit.
not quite sure what this means... do I need to use JRE, or can i get away with openjdk on this? ANY input would help... working on the companion client package, but wanted to get the server out of the way first so I can streamline the creation of the client's PKGBUILD... Thanks in advance!
SOLUTION: editing of PKGBUILD and .sh file as posted below
https://bbs.archlinux.org/viewtopic.php … 4#p1051824
Last edited by CPUnltd (2012-02-02 23:42:05)

1. The usage of the -classpath switch is incorrect. Per manpage, you invoke it like "-classpath <somepath>". So when you call
java -classpath -jar CafePilot_Server.jar
java 6 will throw an "NoClassDefFoundError: CafePilot_Server/jar". That means, java failed to find the class "jar" in the package "CafePilot_Server", which is not exactly what you intended to do (in java packages are delimited by dots like com.mypackage.MyClass, which would go into a file hierarchy like ./com/mypackage/MyClass.class). java 7 will give you the more shorter message: "Could not find or load main class CafePilot_Server.jar"
So in short, the -classpath flag eats your -jar flag. The easiest way around this is, to omit "-classpath", which will result the classpath defaulting to the current directory, or to call "-classpath /opt/CafePilot_Server/".
2. About the '/usr/lib/jvm/java-6-openjdk/bin/java' part: Is there a specific reason to not call the "java" command directly? On a java 7 install:
$file `which java`
/usr/bin/java: symbolic link to `/usr/lib/jvm/java-7-openjdk/jre/bin/java'
And on a java 6 one:
$file `which java`
/usr/bin/java: symbolic link to `/usr/lib/jvm/java-6-openjdk/bin/java`
So i would promote one of the following options:
a)
#!/bin/bash
cd /opt/CafePilot_Server
java -jar CafePilot_Server.jar
b)
#!/bin/bash
java -classpath /opt/CafePilot_Server/ -jar /opt/CafePilot_Server/CafePilot_Server.jar
I do not really have an idea of what the program is supposed to do, but as far as i can see, b) has the advantage, that you do not need to call it as root, since the program will write some logs to the current directory. So when you call a) as a normal user, you will get an Permission denied error, because the programm could not write its derby.log to /opt/CafePilot_Server/, whereas for b) you could call it from your home directory, and you will get the log right there.
Both options assume, that the lib/ directory is installed as mentioned in my previous post.
Last edited by Wey (2012-02-02 22:37:39)

I ran a disk verify & disk repair on my macbook.. both said my system was fine. I keep getting the underlying task reported failure on exit when trying to do disk permission or repair permissions. Also get cant install files in "/applications error. Help

m was fine. I keep getting the underlying task reported failure on exit when trying to do disk permission or repair permissions. Also get cant install files in "/applications error when ever trying to install a driver or update. Help

Hi,
Here's an article for that:
http://support.apple.com/kb/ts1901

Help Getting Low IP Profile Reset/Increased

Hi there and hoping you can help,
About 3 weeks ago, we got a new cabinet installed at the end of the street and this solved the usual congestion issues we were plagued with, even in the evenings! We even managed to hit the heady heights of 6.67mb d/l which, for our village in Scotland, is superb! Happy days!
Last week, I noticed that it was being worked on again, and since they completed the work last Friday, my connection has been stuck at 2mb max. I reset the router and completed the usual stuff but it's still restricted at 2mb. I left it the last three days, and still no change. Run the following tests, with the results as follows.
D/L (mbps): 1.91
U/L (mbps): 0.37
Ping (ms): 51 [this is also a vast improvement to what it was previously]
Also ran the BTW Performance Test with the following:
Download speed achieved during the test was - 1.9 Mbps
For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
Additional Information:
Your DSL Connection Rate : 8.13 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 2 Mbps
Router confirmed the following:
Connection Information
Connection time:
3 days, 08:53:38
Data Transmitted/Received:
441.4 MB / 2.5 GB
I've been connected on my 01651 line since 02 October 2013 and although some slowdown at peak times, has aways been stable with no disconnects. A bit unsure as to why things have now altered and every other part of our BT service has been fine.
I'm a daily user of Xbox Live, Netflix and Sky On Demand, so this restriction, although not life changing, is considerably less than what I should be getting and (more importantly) paying for, on a non-Fixed speed service!
Can you let me know if there's anything I can provide to get some assistance?
Thanks,
Solved!
Go to Solution.

Hi DavDell,
Thanks for posting and welcome to the community forum!
Sorry for the speed problems. I can see your connection speed is good it's just the profile isn't in line with it and that's why you're not seeing the fastest throughput speed from your end.
No need to worry as I can help get you sorted from here. Click on my username and under the "about me" section of my profile you'll see the link to get in touch with us.
Thanks a million,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Help getting Arch64 installed [SOLVED]

Similar Messages

Maybe you are looking for