Help getting desired audio region into the sample editor

Chapter 21 of the manual is of no help. Assume I have to audio regions on the same track--singer sang first part of song..... big pause... then sings second half of song ( same track but two distinct ausio regions) All I want to do is be able to quickly have a desire region show up in the sample editor to do edits. The actual instructions about editing are pretty clear. But getting the correct region to show up in the sample editor is the hard part. Even if I click the audio track and click the audio region desired, some other region or some region on another track will be there. And I can't change. This shouldn't be that hard. +I do not to have this problem with piano roll and software intrument regions. You simply click a software track region and click piano roll and the detail of the region shows up+...... Is there a simple protocol for getting a desired audio region to show up in sample editor. Notice that there is no clear explanation for this basic, antecedent task in Chapter 21.

You can't really 'quantize' audio. If it is a single track like stacatto mute guitar, or snare drum hits - you could. Use the 'strip silence command' and then in the list editor highlight all the individual pieces of audio and quantize that.
But if the audio is continous or there are too many notes very close together you will not be able to do that.
If you mean that the track was a 'real guitar' (by musiclab) - yes you can quantize the midi notes.

Similar Messages

How Can I Change The Sample Editor's Audio Output Channel?

Hey, new to logic, im using a Motu 828mk3 interface,
The Sample Editor is playing out on differnt outputs(1-2)
on my interface than my audio tracks in the arrange window,
my audio tracks are assigned to out 9-10 in the mixer section
which are the Main outputs on my interface, How can I change the
audio output of the Sample Editor to play out of my interface's main outputs(9-10)?

Change the output of the Prelisten mixer channel to the outputs you want it to play from. The prelisten channel is used for the sample editor and the Apple loop previews... you'll find it in your mixer somewhere in the high audio channel numbers...

Istalling third party instruments.. i have tried to go to application support and putting them into the sampler but they are still not showing up.. can someone help me

istalling third party instruments.. i have tried to go to application support and putting them into the sampler but they are still not showing up.. can someone help me

Hi
So these are EXS24 Sampler Instruments?
If yes... the .exs Instrument files need to go in
Library:Application Support:Logic:Sampler Instruments
Or
<User>:Library:Application Support:Logic:Sampler Instruments
CCT

How do I get my tabs back into the main window?

I've had a problem with an add-on displaying a small extra window every time I open a session for some months now: I know you're supposed to try disabling and re-enabling every add-on you've got to find out which one is responsible, but this is a work computer and with all the add-ons I have, it would take too long, so I've just closed the extra window every time and got on with my work. However, for some reason today my forty-odd tabs have all opened in the small extra window, which has no tab bar, navigation bar or menu button. How do I get my tabs back into the main window of Firefox, or alternatively get that window to behave like a normal Firefox window so I can use it?

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
*http://kb.mozillazine.org/Multiple_profile_files_created
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder

Cut parts from song and import them into the sampler on ipad

How do I cut parts of my song in garageband (ipad) and put them into the sampler to fix the pitch on specific parts of my pre-recorded vocals?
For example, I already have a song I recorded, and I would like to simply cut a few seconds of the vocals, go into the sampler, fix the pitch, and then re-insert the editied piece back into my song.
Is this possible on the ipad? I know that the "autotune" option isn't available on the ipad, but I simply want to fix the pitch on a few notes and I was wondering if there's any way to do that.
If there's not, do you have any suggestions or any app reccomendations that might help me achieve this? I can't afford a macbook pro so that's out of the question.
Sorry if my explination isn't clear! And thanks for any help :]

Hi,
you should go to PI 7.1 and not PI 7.0 otherwise it makes not so much sense.
And yes it's possible to migrate your scenarios. If you have UDFs you have to check them because the java version has changed.
Regards
Patrick

How to get an RSS feed into the phone using Nokia ...

Is it possible to get an RSS feed into the phone using the Nokia PC Suite? RSS is mentioned in several places in the help files, but I can't find a place that describes how to set it up.

just as they said in the help:
"On the Bookmarks section, you can define bookmark and RSS feed synchronisation details. Bookmarks and RSS feeds can be synchronised between a Nokia mobile phone and a supported web browser. Note that bookmark and RSS feed synchronisation is not available for all phone models. "
What's the law of the jungle?

New users are getting "cntl_error" whenever login into the portal

Dear Experts,
New users are getting "cntl_error" whenever login into the portal. They are accessing .par application. I have read so many threads, but unable to find exact solution.
I have tried in my browser with the user login, then no error. But the user login there end then its giving "cntl_error" error.
Problem with Internet Explore Browser? Any additional setting required for users browser?
Could you please help me, how to resolve this error.
Thanks in Advance.
Regards,
Vijay.

Hi Vijay,
Check this thread - "CNTL_ERROR" raised,error key: RFC_ERROR_SYSTEM_FAILURE- Show Team Calendar , this might help you on what you are looking for.
Regards,
Sen

If I import audio books into the music section of itunes it lists the books as albums and all the chapters as tracks fine when I sync them to my ipod classic, but not if I import them as audiobooks, any ideas please?

If I import audio books into the music section of itunes it lists the books as albums and all the chapters as tracks fine when I sync them to my ipod classic, but not if I import them as audiobooks and then sync them, any ideas please?

If you import the audiobook as an audiobook to your iTunes Library, it will be listed in the Books section of your Library. You may need to turn on Books in order to see them. If you cannot see the File/Edit... etc. menu, use CTRL B on your keyboard to make that menu bar appear. Then go to Edit/Preferences>Books and put a tick in the box.
But, if the imported audiobook shows up in the Music section of your iTunes Library, highglight the files (in iTunes) and select File/Get Info/Options/Media Kind>Audiobook. These files will now transfer to the Books section of iTunes.
Once on an iPod Classic, look under the Audiobooks menu. Again, you may need to change the settings in the Settings menus, in order to have the Audiobooks option shown on the Main Menu and/or the Music Menu.

Changing the volume of a specific Audio Region in the arrange

Is there the possibility to increase or lower the volume of an individual audio region? Similarly to the way one would use the hyper editor for a midi region? So to clarify it in other words. I would like to increase the volume of a specific audio region in the arrange page without using the track automation.
<Edited by Moderator>

Just open the sample editor (default key command "W", or double click the audio region). Highlight the waveform area you want to gain change by clicking and dragging your mouse across it, and under the functions menu, select "Change Gain" (default key command control/G).
This is destructive editing, although the sample editor has it's own undo history, separate from that of the Logic song.
To play it safe, make a copy of the audio file first, and edit from that.

Ok, so I transferred my 3S info to my 4S by restoring from an old phone backup. But SIRI is gone and god knows what else?? Can I get my old stuff into the new phone and keep the 4S new functionality?

ok, so I transferred my 3S info to my 4S by restoring from an old phone backup. But SIRI is gone and god knows what else?? Can I get my old stuff into the new phone and keep the 4S new functionality?

I suspect unless he had some items in iCloud backup then they are gone. Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.

Getting my iTunes library into the cloud

Hi,
I have a large iTunes music library (about 280GB), much of it made up of rips from my CDs or transcriptions of LPs. Many of these items are not in the iTunes store. Is there some way to get my iTunes library into the cloud and have the cloud version be the iTunes target library on my MacBook Pro, my iPhone and iPad? What alternatives to iCloud are there that would work for this purpose?
Thanks!

You didn't read the link I posted did you?
"iTunes determines which songs in your collection are available in the iTunes Store. Any music with a match is automatically added to iCloud for you to listen to anytime, on any device. Since there are more than 26 million songs in the iTunes Store, chances are your music is already in iCloud.3 And for the few songs that aren’t, iTunes uploads what it can’t match (which is much faster than uploading your entire music library)."

Can I move audio in logic by the sample in the sample editor to compensate

I wanted a final say on wether or not I can move audio with sample accurate percision by moving the anchor in the sample editor with update in arrange page turned off. i just need a verification of this.
Thanks guys

yes you can and should use the sample editor to make
such compensations. you do this by aligning the
anchor point to the sample or part of the wave form
that you want to correspond to a beat or subdivision
(ideally) though of course it can be any point you
want it to.
if you use 'pickup clock; move object or event to
SPL' KC the anchor point will jump to the SPL.
Philip K is right though; if your entire track is out
by the same amount that you can measure you could use
the sample delay (though of course that will only
delay it not move it forward in time). but you won't
see the waveforms align themselves to the beat
meaning you would have to be aware that that track
has been compensated for.
on balance i would edit with the sample editor.
I was thinking that you could delay the rest
of your tracks by however many samples thus
aligning by compensating everything else though
in real world situations I don't know how practical
this would be. I keep forgetting that you can measure
how many samples you select in the sample editor even
if you cannot see them individually. So I will defer
to the voice of experience on this. If Rohan would use
the Sample editor, then I would tend to agree

I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac.

I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac. Any suggestions or ideas? Thanks!

I'm trying Facetime with my Mac Mini with OS 10.7.5 and an Acer H243HX monitor (w/ HDMI, USB). I can get the webcam-in , but even with settings in Sounds set to have the input come through the Acer monitor, I still cannot get any sound input into the Mac. Any suggestions or ideas? Thanks!

My laptop is having trouble downloading and playing rentals from the iTunes store, I get a little way into the film and it stops playing and will not download any further. This has happened on two separate occasions, my laptop is under a year old?

I get a little way into the film (just 4 minutes this time!) and it stops playing or downloading. The remaining download time changes continually and will say anything from 6 minutes to 11 hours! My laptop shouldn't be the problem as it is under a year old and I haven't experierienced any other running problems with it... I hope I will not be charged for the film !!

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

Mail starts to play send/receive sounds whenever I plug in a audio cable into the macbook pro

Hi,
I have this strange bug:
I have Mail running and I plug in an audio cable into the audio out jack. Then Mail starts to play send and receive sounds endlessly. Then I have to quit Mail and start it again. Then everything is fine. I think I can live with that, but it's also kind of annoying. Any hints?
Thanks!
Daniel

*there comes (i was mixing up english and german spelling without noticing )

Help getting desired audio region into the sample editor

Similar Messages

Maybe you are looking for