Help Getting iTunes to Stream Through My Home Network
Hello- I have a PC running XP and recently purchased a new Pioneer Elite Audio/Video home stereo reciever. It has built in Windows Media networking so that I can evidently stream music and pictures from my home network through the RJ 45 port in the back of the machine. My television a SONY Bravia has the same feature and requires this same Windows Media File Sharing stuff? I have no idea what I am doing but someone told me I had to install Windows Media Player 11 in order to do this as iTunes was "not compatable" with WIndows Media File Sharing??? I guess this makes sense but now that I have Windows Media Player 11 it cannot find any of my iTunes music in the iTunes folder- not even when I point Windows Media Player 11 directly to the folder. Does anyone know how to help me step by step in a simple explanation? My thanks in advance. By the way my connectivity IS working as I am able to see my server- jsut not the content. Thank you.
Hiya..
When you change over modem, you almost always need to do a complete reset of the TC..
Factory reset it by holding in reset and then powering on the TC.. keep holding reset in for about 10sec. until the front led flashes rapidly. Release and do the setup via ethernet to a computer.
Set the TC in bridge mode. That is basically all you need.
Setup wireless however you prefer .. you can use same or different SSID (wireless name) to the u-verse modem router. Or turn one or the other off.
I guess this is pretty common question here.. if you do a search for u-verse in the TC discussion area you will see lots of posts.
If you still have issues or cannot find them.. just ask again.
Similar Messages
-
I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
I just purchased a new iPhone 5 and I can't get it to connect to my home network, which is ATT U-verse. Can someone help me?
Apps and music aren't part of the backup. App data is http://support.apple.com/kb/HT4946
-
How do I get my iPad to remember my home network? I already switched on the "automatically join known networks"
turn off all of the ipads, (not put them to sleep but turn them off) then unplug your Wi-Fi router for 2 mins. Plug it back in and when all the lights are (green or blue, depends on who makes the router) turn on one ipad and then connect it, wait 3 mins and turn on the other and connect it, do this for each iPad and it should fix the problem.
-
Streaming videos over home network (KDE)?
What do I need to be able to stream videos over home network in KDE?
I tried to do it with ssh, both graphically and by terminal (Network>AddNetwork>ssh) and it didn't work. It tried to download the file. I was reading this is some kind of bug in the KDE.
What else can I use to stream videos? Samba? Avahi?IMO, it would be best to abandon SSH completely. Its going add undesired overhead to this project.
I use mediatomb to stream content to PS3 and HTPC running Arch: https://wiki.archlinux.org/index.php/Mediatomb
If you just want to be able to access files locally from a remote server, use NFS to mount the desired remote folders: https://wiki.archlinux.org/index.php/NFS -
Apple TV Gen 2.. Terribly Slow Streaming From Wired Home Network via itunes Windows 7. Please Help
Hello all, I just signed up for this as i hope to get more results from here than i did waiting 4 hours for a call from apple today.
I recently purchased an Apple TV Gen 2.. installed it on my Samsung 40" HDTV via HDMI cable and also ran a network cable to my basement where my router, (Linksys 5 port router plus Wireless) is mounted on the wall beside the cable modem.
just to rule things out i will give some spec's and details before i get further into this.
My goal is to use my Desktop Homebuilt PC running windows 7 ultimate 64bit to store my Digital Movie Library and stream through itunes all of my digital media to my Apple TV located in another room. Both Apple TV and my desktop windows 7 PC are hard wired NOT WIRELESS.
My internet connection is cable and tested it this evening several times at 58.9 Megabits per second down and 8 Megabits per second down... (yes that is correct 58mb/s down. this equates to about 7.1 megabytes per second download speeds for reference.
Now just to rule out my 2 year old wireless router i went and purchased a brand new router today... Same results.
Now on to the problem details and my findings.
Using my Desktop PC wired to try and stream Itunes movies from the streaming is absurdly slow.. very slow... i have yet to wait to see what happens after 30 minutes of waiting for a Movie to start.. music also takes a long time to load...
Music... i can go to icloud funtion which i paid for today.. and click on the same song in icloud and the song starts almost instantly, so does music videos...
Also previously purchased TV shows starts playing from the cloud almost instantly as well even HD TV shows...
Trying to stream anything through my desktop windows 7 pc just doesnt work right...
I have narrowed this problem down to my desktop.. but can not figure out what the problem is...
using my macbook air 120GB SSD wireless over the same network, which i also have a mirrored copy of my itunes library for testing purposes... there is zero issues with streaming anything from my macbook air over the same network via wifi...
Also using my ipad 2 mirroring works flawlessly, even HD movies plays without a hitch... same goes for my iphone 4s
the only issues i am having are with my desktop and streaming from my itunes libary on it... i do not want to use my macbook air.. as that defeats the purpose of having apple TV.. in the future i plan on ripping my entire DVD / Blueray collection to a 3 TB hard drive and stream to my AppleTV... from my desktop computer storing my entire DVD / Blue Ray library digitally on the 3TB hard drive....
But i can not get this to work... i can see my itunes libary on my desktop.. i can play music and watch movies.. other than anything HD will not play... but everything takes a rediculously long time to load... i can download an entire movie with my 58mb's connection in the time it takes to load something streaming from my itunes libary on my desktop PC...
if anyone has any suggestions.. there may be something i have overlooked or i am missing. any input and or advice will be greatly appriciated.
Thanks,
Specs on my Desktop system: itunes Streaming media PC
Windows 7 Ultimate 64bit Fresh install as of yesterday.
Intel Core i7 2700k @ 4.8Ghz
ASRock Pro 1155 motherboard intel Z68
OCZ Vertex III 120GB SSD x2 Raid 0 (OS Drive) 1,000Mb/s reads , 990 writes
Western Digital Caviar Black 640GB 7200 Rpm (itunes media folder drive, backup drive)
GTX 470x2 SLI
Gskill Z Series DDR3 2133mhz @ 1.65v cas 9, 16GB
1200watt cooler master PSU
LG 22" 1920x1080 LED x3 Nvidia Surround (6018x1080)Ok.. in order to help other users i will post this..
I have resolved the issue... it was rather simple and dumb...
I never use windows media player ever.. i do not like it and can not stand it.. because in my case it was a brand new windows installation this fix will only apply to certain users..
because it was a brand new windows installation.. i had never clicked on windows media player.. apparently streaming settings are embedded into windows media player for the windows 7 OS... in past installations that i have used for years.. i simply never ever clicked on windows media player, as i never had a reason to.. i use itunes for my ipad, iphone etc.. etc...
by accident and shear luck i decided to click on windows media player.. and of course go through the express settings.... after i did this all of my streaming problems to my apple tv gen2 disapeared... HD movies now start almost instantly... so as i stated above apparently there are media streaming settings embedded into the OS through windows media player... doesnt make any sense to me as i never use the program.. but whatever that fixed my issue..
so for any of you windows 7 people out there using a windows 7 pc as your itunes sync computer and using that itunes library to stream to your apple tv... make sure you have done the initial setup at min.. of windows media player.. i still left itunes as my default player.... everything now works flawlessly... infact for whatever reason.. even in an HD movie my network almost has half the movie synced now accross the bar before the movie starts so now my apple tv is blazing fast....
i have been struggling with this for 2 days now and simply never gave it a thought that windows media player would ever have anything to do with itunes streaming a totally seperate program.. but it did..
i hope this helps other people with similar problems.
good luck -
I need help getting itunes on my new computer. old one crashed
My old computer crashed, I downloaded iTunes on my new computer and need help getting all of my stuff on it that I had. I did 'home share' to see if that worked, and it didnt.
Also, on my old computer, when I synced my iPad & my husbands iPod, it didnt sync any music or podcasts, no videos-and i went through each category seperately to sync it and it didnt work. So I can't sync my devices to the new iTunes bc not everything is on there that i have purchased.It has always been very basic to always maintain a backup copy of your comuter for just this occasion. Use your backup copy to put everything on the new computer.
If for some reason you have failed to maintain a backup, not good, then you can redownload some itunes purchases in some countries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Need help choosing how to extend my existing home network to my detached garage?
I have done as much research as possible on this scenario but cannot seem to match the ideal solution with my wants. Perhaps I simply just do not understand networking as well as I thought I did. Either way, any helpful information or suggestions are greatly appreciated.
Objective: Extend my wireless network to my detached garage.
My current ISP provider is Time Warner Cable. I have RoadRunner Extreme, which in my area gives consistent speeds of 50 Mbps download and 5 Mbps upload when I am connected via ethernet cable. When I upgraded to the "Extreme" package i found out I was forced to use their Motorola SB6580 ... its a DOCSIS 3.0 cable modem + wireless router. I was able to access the Motorola's setup options on the internet and I disabled the wireless function. This has allowed me to use my Time Capsule as the primary router to provide wireless access on my home network. I have not had any issues with this setup and is my preferred way to operate.
I have recently moved my home office to the 2nd story of my detached garage and need to extend my wireless network to meet the demands of all my gear. I have decided to achieve this goal by going with one of the following 3 options:
1.) enable the wireless function on the motorola modem making it the primary router. move my time capsule out to the office and use it in bridge mode. However I do not think I understand bridge mode correctly. I thought the secondary router (in this case my TC) in bridge mode needed to be connected w/ an ethernet cable at all times to enable this feature? If I understand similar networking discussions I will lose the ethernet ports with this option? If this isnt called Bridge mode once i take away the ethernet cable what is it "technically" called?
2.) buy a 2nd airport extreme base station and create the same type of wireless network extension setup. The difference here is I would leave my motorola's wireless features disabled, use 2 apple products that speak apples to apples wirelessly and relieve myself of all the headaches involved with a neopolitan setup. This seems like the obvious choice b/c Apple products are much more user friendly, but I dont want to spend the $200 on a new router if I can achieve a comparable setup by just enabling the equipment I already have.
3.) use either of these 2 scenarios above & go buy a 150' ethernet cable to join them together. if this is the case wouldnt a $50 hub suffice on the end of the cable? I dont necessarily need to have wireless, just reliable connectivity. I can access the existing wireless network now, but download speeds are not great and things really start to slow down when i have multiple clients connected. I would rather not have to drill through exterior walls, bury conduit and install learn how to install data wall plates, but i will if this is the pros far out way the cons.
Current modem/router placement: if standing @ the front door of my 1 story house facing out towards the street my motorola modem/router is in the front right-hand corner of the house.
Distance location of the detached garage office setup: if standing @ my front door my my work area is in the far back left corner of my property. it is approx 175' from the router and on the 2nd story of the garage. I said 150' cable earlier b/c i could relocate the router to a bedroom on the opposite end of the house, however this would eleminate the current wired status of the items connected to it and I would prefer to keep them wired in.
clients connected in the house: (4) apple tv's; Roku; Xbox; Wii; Playstation 3; (2) Lenovo laptops; iPad; (2) Blackberry's; (2) iPhones; iPod touch; (2) wireless netowrk printers; (2) smart tv's ... a handful of these are currently wired into the time capsule now which provides an uninterupted viwing experience for the MLB package. This of course trumps all opportunity costs involved with moving the router. There is nothing more frustrating than a screen buffering in the botton of the 9th inning after you've sat there for 3 hours.
clients connected in the office: (2) 27" imacs; apple tv; iPad; network printer; Wii; Harmony Link universal remote; Mac Book Pro ...
I have approx 5TB of digital media that is shared over the network via shared iTunes libraries that I would like to access as well. iCloud helps with all of our household gadgets as far as acessibility but with all the backups going on simutaneously it also creates headaches when you need the throughput. I need to do a better job of managing those settings. nonetheless, I would like some guidance on the best way to extend my current netowrk, suggestions for better scenarios i did not mention and thus am probably not aware of and any networking 101 schooling if it doesnt sound like i understand the way bridge mode/network extension works. sorry for the long post and thank you for your time & help.Ethernet beats all other solutions hands down..
A single ethernet connection from wherever is the closest point in the house to the garage office... wins. You can plug a router working as AP and switch or pure switch on to it. Get a cabler in to do the job.. and they can probably figure it out and do the whole job whilst you scatch your head.. yes you will pay for it.. but a cabler knows how to do it. And most likely leave the inside network exactly as it is. Since office is important to be reliable.. there is one and one only reliable method.. ethernet.
If the garage and house are on one electrical circuit.. which is doubtful if it is a separate building then EOP adapters can often work well.. They do not handle earth leakage protection, breakers (rather than fuses) or meters at all well.. but if they are simply all connected to power.. behind the same meter and using old fashioned fuse box.. EOP rated at 200mbps or some now are 500mbps can work reasonably well. Speed about the same as wireless at its best but if it works when installed will generally not change with the weather, moon, and wind direction which wireless is liable to do.
Wireless bridging.. hmm avoid if possible. For reliable connection no.. apple products can do wireless repeater but as you mentioned that turns off the ethernet ports except for the Express.. that is the only unit you can use as a bridge and plug a switch into it. Why Apple why??
So if you want to bridge two points by wireless buy specialised wireless bridge.. that means an AP in the house plugged into the existing network.. and AP unit perhaps on the outside of the garage.. or in windows if you have a window in the house that looks at a window in your office. Look at products from companies like ubiquiti.. they are not too expensive but professional equipment and designed for precisely this kind of work.
Hence the reliability is dramatically better than domestic stuff.. and will require a lot less work to maintain the link.
Conclusion.. wire it.
Unless you rent the house.. an investment in ethernet cabling install once properly and forget .. beats every other solution even if it costs x5 as other solutions. -
ITunes cannot access files from home network
Just got new Vista PC. All my music files are on older XP PC. I have set up my home network, and Vista PC can see/access all my XP folders. I have Sonos and Yahoo Jukebox installed on Vista PC and both programs can access the XP music files and play them.
On iTunes however, I cannot create my Music folder with the XP music. When I select 'Add Folder to Library' and get the 'Browse for Folder' popup, I see the 'Network' icon, but when I select it, nothing happens. I can right-click 'Explore' from there to re-launch/see the full network, but iTunes cannot seem to see/access this.
Same problem if I go through iTunes' Preferences/Advanced/General to set the iTunes folder location. I can hit browse and see 'Network' in list, but selecting it produces nothing.
Very surprised that I have no problem through Sonos or Yahoo Jukebox but Apple brakes down.
Any thoughts?After the update I cannot connect to my router anymore
(see other threat) -
Need help with QoS config/setup for my home network.
I have a home network that spans two buildings, has and FTP download server, VoIP phones,and several computers among other IP devices. I run a home based business where my clients get access to the company FTP download server (NOT illegal file sharing). the problem is that when they are downloading files my VoIP takes a big hit and gets choppy when speaking to my customers. Below is the layout of the network.
Our Internet access is Verizon 4G, there are no other options available at this time or we would switch. The Verizon 4G MiFi connects to a TP-Link wifi router that then connects to port fa0/5 on the Office 3550PoE switch. There is a trunk between the Office switch to the House 3550PoE switch. The House switch then connects to the Shop 3524XL switch also using a trunk. Please note that EVERYTHING works fine other than the VoIP issue, VoIP makes and receives calls without connections issues.
Auto QoS has been run on the Office switch ports fa0/1 and fa0/2 as well as on the House switch ports fa0/3 and fa0/5. There is NO auto QoS on the 3524XL
What is the best way to give VoIP traffic top priority over FTP and web browsing when going out port fa0/5 on the Office Switch? Over the internal network we are not having any call quality issues between the IP phones, just calls to our SIP provider. Yes, I understand that once calls exit the Office switch to the TP-Link wifi router there will not be any QoS. But, if I can give priority to the packets at the layer 3 Office switch (or wherever you suggest) then at least I will not have to kill a users FTP download while I am on the phone.
Thank YouI can make ANY changes necessary, just need to know what to do.
First, did you notice the output of the command sh mls qos fa0/5 above? Is it working correctly?
Next, Yes I do have version W17 and can install if if needed. The lost of possible commands I listed above was from the conf t - config interface fa0/x level. There is class and policy mapping commands the the config global level along with all these other commands:
aaa Authentication, Authorization and Accounting.
access-list Add an access list entry
alias Create command alias
arp Set a static ARP entry
banner Define a login banner
boot Boot Commands
buffers Adjust system buffer pool parameters
cdp Global CDP configuration subcommands
cgmp Global CGMP configuration commands
class-map Configure QoS Class Map
clock Configure time-of-day clock
cluster Cluster configuration commands
default Set a command to its defaults
default-value Default character-bits values
downward-compatible-config Generate a configuration compatible with older software
enable Modify enable password parameters
end Exit from configure mode
errdisable Error disable
exception Exception handling
exit Exit from configure mode
file Adjust file system parameters
help Description of the interactive help system
hostname Set system's network name
interface Select an interface to configure
ip Global IP configuration subcommands
line Configure a terminal line
logging Modify message logging facilities
mac-address-table Configure the MAC address table
map-class Configure static map class
map-list Configure static map list
mvr Enable/Disable MVR on the switch
no Negate a command or set its defaults
ntp Configure NTP
policy-map Configure QoS Policy Map
power power configuration
priority-list Build a priority list
privilege Command privilege parameters
queue-list Build a custom queue list
rmon Remote Monitoring
scheduler Scheduler parameters
service Modify use of network based services
shutdown Shutdown system elements
snmp-server Modify SNMP parameters
spanning-tree Spanning Tree Subsystem
stackmaker Specify stack name and add its member
tacacs-server Modify TACACS query parameters
tftp-server Provide TFTP service for netload requests
time-range Define time range entries
udld Configure global UDLD setting
username Establish User Name Authentication
vmps VMPS settings
vtp Configure global VTP state -
I've never had a problem connecting to my home network until recently. The desktop computer is connected, and my iphone connects as well. It is not a problem with the wireless router, but rather I believe with my computer or airport. How can I fix this?
https://support.mozilla.org/en-US/kb/ask-tb#w_how-to-ask-your-question
-
How to improve iTunes sound quaility through analog home stereo?
The core of my home stereo system is an old NAD 7140 stereo receiver and I really like the sound. I have set up a dedicated laptop (a bottom-end Lenovo Ideapad) that I just keep next to the stereo and use it as a storage device/glorified mp3 player. I keep all my "second tier" music there -- the music where I can live without a physical CD jewel case. I use a simple RCA/headphone y-cable to run from the Aux input in the back of the receiver to the headphone jack on the laptop.
The trouble is, the sound just isn't very good. It often sounds muddy and boomy with certain genres -- old school rock n roll particularly. Hooking up my wife's MacBook Pro and using that as a player is an improvement, but it is still not 100%. My guess is that the soundcard on the Lenovo is just poor quality, while the soundcard on the MacBook is better, but that neither was really designed to interface that well with an analog stereo receiver.
So, I'm trying to figure out a way I can keep the NAD 7140 but get better sound out of my mp3 collection. And I don't want to spend an arm and a leg. I have heard that USB-based Digital Audio Converters may be the ticket -- something like the HRT Music Streamer II or the NuForce ICON. Is that a solution you folks could recommend? Or is there another path I should take? BTW, I'm not a fanatic when it comes to sound quality. AAC is fine by me -- no need for FLAC or other lossless formats. I just want the sound routed through my laptop to come closer to the sound routed through the CD player. IF DACs only offer infinitesimal improvements, then I think I'll pass
I'd appreciate any insight you could giveNo one listens to iTunes through an analog stereo????
-
Need some help getting iTunes installed
I already know that I have a problem installing iTunes and its during the "publishing product information" part of the installation. I got my hands on a Windows XP Home Edition disc . . . I attempted to do the installation repair . . . part way through it I was asked to give the "administrators password" . . . this I do not know. After the third wrong password I was told that I needed to reboot and start over. I am trying to avoid the re-installing windows b/c of all the factory crap that I have on this comptuer.
Is there anyone out there that can break this down to me big bird and barney style?? I have been on the phone waiting to talk to someone at compaq from more than 80 mins now!!
Thanks
Puckhi puckusmc!
I attempted to do the installation repair . . . part way through it I was asked to give the "administrators password" . . . this I do not know.
okay, it sounds like you've already found the correct KB doc for the "vanishing installation" problem:
http://docs.info.apple.com/article.html?artnum=300361
... so you're on the right track.
what administrative rights do you have on that PC?
if you don't have administrative rights, can you contact the administrator to get them to do the install for you?
love, b -
Can't get iTunes to play through Airport....
On my G5, when I am in iTunes and click to play music through the Base Station, a bar comes up "Connecting to Base Station" but it never connects. I have waited up to 5 minutes with no results.
I am guessing this is in the G5 because when I do the same process from my iBook it works fine.
I have looked in the help pages and found nothing that fixes this ...
ANY TIPS would be greatly appreciated
Thanks
Jim S
iMac G5 Mac OS X (10.3.9)Take a look at Airfoil for Mac if you want to stream any audio source on your Mac to the AirPort Express.
Rogue Amoeba | Airfoil for Mac: Wireless Audio Around Your House -
Ten times deleting all apple software doesn't help getting itunes 11.1.4 to install properly
Hi,
Following this thread for a day now and done (ten times) everything that was told, but unfortunately haven't been able to install iTunes. Still getting a error message when (re)starting windows 7. Should I wait until a solution comes or should I keep on trying deleteing-installing-deleting-installing?
Thanks for all your efforts, but it hasn't helped me so far.
KarsSame thing here. I finally got wifi sync working again by downgrading to iTunes 11.x.2 .
The trick is to make sure you remove all components of apple first.
Apple software updater, App support, Mobile device support and bonjour.
Then reinstall 11.x...2 .
On another note:
Not to further antagonize the issue but I wish whoever makes itunes over there sees this and gives users a easier way to go back to iTunes 10.7 or fixes these wifi sync issues for good and brings back some of the nice features like coverflow from iTunes 10.
Apple and itunes: I'm "Stuck in the middle with you"
lol
Maybe you are looking for
-
T60p Windows 7 (x64) Atheros WiFi driver issue
Hello, The new Windows 7 supported Access Connections driver support matrix says the Microsoft provided Atheros driver is the one to use with Windows 7. However, I can't get this driver to connect on a T60p. I tried with two access points (Linksys
-
Time machine and sleeping settings
Hello, Since I upgrading to Snow Leopard I experienced some problems with my usb HD unit configured as Time Machine backup. I've noticed that in case Time Machine is started and my Mac goes sleeping or I turn it sleeping with the power button then th
-
help!!! i had an iphone4s and now a iphone 5c i need help restoring the new phone to what it had at last update.... i lost all my pics, any new contacts, texts, notes etc. all apps i downloaded new are there, but everything else gone, someone said i
-
Bug in Oracle Java Compiler???
Hello! I think I found a bug in OJC. Take a look in these files: ------ File MyInterface1.java ------- public interface MyInterface1 public void aMethod1(); public void aMethod2(); ------ File MyInterface2.java ------- public interface MyInterface2 e
-
Error: The file "iTunes Library.itl" or "iTunes LIbrary.xml" cannot be.....
I'm trying to recover my playlist I spent a week on sorting music and after updating to the latest iTunes update it all vanished and all my music and playlist was gone!!!! ***????? Anyhow I read a couple of solutions on here to try to fix the problem